Batch not created for the Inspection lot?

Hi Experts,
I have created a  the production order by inputting the Batch in the GR tab and released the production order. The release of Production order will create a Type 03 lot , but surprisingly it doesn't show the Batch in the Batch field when i look the inspection lot that was created by release of production order, instead it shows blank. I have checked the material master and it is batch managed material. Please let me know where I'm going wrong.
Configuration- Batch is unique at material level indicator checked
my plant has Batch status management indicator
Please find the screenshot below for type 03 lot and also the Batch management indicator in material master in sales/general view, work scheduling and warehouse1.
Thanks,
Pavan

Hi Pavan,
According to SAP Note 50618, you may consider to implement the correction on that note or use partial lot assignment.
For partial lot assignment, you can find the setting in Routing header and customizing in SPRO with path: Quality Management - Quality Planning - Inspection Planning - General - Define Identifier for Inspection Points.
There's also another discussion regarding this issue. Please find here.
Regards,
Julian

Similar Messages

  • Work flow not created for the Shopping Cart

    Hi one of the customers created a shopping cart,in approval overview it is showing as no need of approvals,but the status of approval is 'awaiting approval', but workflow is not created for the Shopping cart. advised to re-order in change mode but still no use. please advise.

    Hi,
      what do you see in SLG1? Check the below t.codes
    SM58 - check for stuck remote function calls
    ST22 - check for system dumps
    SM13 - check for stuck update requests
    SM21 - check in the system log for anything unusual
    SWUD - run a consistency check on the workflow
    Saravanan

  • For the Inspection lot status is CRTD instead of REL status

    Dear Experts,
    Today I have observed strange behavoir of the system.
    For the Finished material 04 insp type, Every day we used to generate inspection lots automatically with MB31for 101 mov type.
    generated inspection lot status will be REL bydefault. Today we observed system status is CRTD.
    I have checked any material master/Inspection plan been change or not, but it was not changed.
    Please suggest how this behavior happen suddenly.
    Regards
    Don

    Dear Don,
                    Check in SPRO for inspection type configuration. Some body has changed the 'Task list usage' for Inspection type.
    If you are using '1' and if there is other one except '1' then system will create inspection lot in CRTD status.
    You need to change it manually in QA02 and assigne plan.
    Thanks and Regards
    Harriesh.

  • Follow on Document not created for the Purchase Request.

    I can able to create a purchase request for the  material with quantiy equal to  or more than 16. If I create a purchase request for the same material with quantity less than 16., Follow-on Document not getting created. I checked the transaction BBP_PD, it does not show other status like Shopping card ordered , approved, Items in Transfer Process and Follow-on Document created. Any Reason for this.?

    Hi,
    please check if there is any tolerance enabled
    Regards

  • Accounting document not created for the  billing document in CIN

    Hi Experts,
    I have made conditon records for BED, CESS, Edu Cess and VAT. I hve defined the accounts in both excise transactions and VKOA Settings even then the accounting document is not getting created. I am getting the following error.
    No account is specified in item 0000001003
    Message no. F5670
    Help to solve the above
    Thanks in Advance

    Open the document in VF02 / VF03, go to Environment -> Acct. Determination Analysis -> Revenue Accounts.  (You can also press CtrlShiftF12).  There check for the item no. 1003.  You'll find no account has been determined for this item through any procedure. 
    In the right pane, it will also give other details like CoA, Sales Org etc (as per your access sequence) which it tried to find the account for.  Assign an account for that combination in VKOA and then try to release the doc for accounting.  It should work if you have assigned correctly.
    Ravi.

  • PO not creating for the matl,giving error Material not maint for purchasing

    Hi SAP Gurus,
    When I am trying to create PO for 1 purticular material, system giving error " Material CG056A not maintained by Purchasing Message no. ME 046 " Please let me know in order to create PO successfully what are all the purchasing related information necessary to maintain for this material.
    Thanks and Regards,
    SHARAN.

    Hi
    While creating the material you have not maintained the purchasing view, hence you are getting an error.
    Maintain the purchasing view for the material in MM01, which will solve the problem.
    Rgeards
    girish

  • Batch Input file is not created for the program RFUMSV00 (VAT)

    Dear All,
    Yesterday we run the program RFUMSV00 for posting VAT entries. But program dosnt created any batch input file. We tried to create the file once again by running the program, but there were no data;s on it.
    I can able to view the spool which is created in SM37. It is in the finished status.
    Can you please advice, do I need to delete any table entry for this like BSET etc....or how I can create the batch file again by ruuning the program. I dont want to post manually through FB41 transaction.
    Is there any Standard SAP solution for this.
    Please let me know anybody need any clarification about this question.
    Thanks in advance.
    Regards,
    Raja.A
    Edited by: Raja.A on Dec 1, 2009 12:47 PM

    Hi,
    Check the status of the batch in SM35 transaction.
    if the batch is locked by mistake or any other error, now you can release it and aslo you can process again.
    To Release -Shift+F4.
    Also you can analyse the job status through F2 button.
    Bye

  • Standard Report for all inspection lots

    Dear all,
    Pls guide me from where I can retrieve the data for result recorded for MIC, inspection lot wise.
    Actually currently working for Pharma company where we are using, Inspection Plan (task list type Q), with inspection point 200 u2013 Physical sample. Materials are being managed through Batches, so each inspection lot is having separate batch number.
    Now the requirement is to find a STD sap report that can retrieve us the result for a material for all the inspection lots (Batches) it have, in the report type from where I can down load it to word/excel.
    In short, the report should contain, Material, results for all MICs under all inspection lots.
    I have already tried out;
    QGP1 but it shoe the result for only a MIC at a time.
    QGA2 but not able to visualize results for all MICs at once.
    MCXB but, gives only the quantity of MICs not the results of it.
    Regards,
    Shyamal Joshi

    Hi Craig,
    The requriement is to have results for the Inspection lots only, not for the batch values.
    The report MCXD is giving the quantitative analysis for the batches, I will be very pleased if you suggest me any report that gives me the results (values entered during result recording) of these MICs, inspection lot wise, just as the MCXD give quantitative.
    I think the term BATCH is creating confusion, that is Y u have suggested me CL03N, but as I have mentioned eariler also, currenlt working with Pharma company, where each manufacturing lot is give a batch number, (in sap terminology the Batch management function, MSC1N), that is why i freauently used BATCH. Sorry for that communicational error from my side, and I am very much thank full to you for your each valuable comment, suggestion.
    Regards,
    Shyamal Joshi

  • How partial inspection is done for a inspection lot & vendor payment done based on inspection result

    Dear Gurus,
    In our business 1000 bag material is received in one material document. So one Inspection lot is created.
    Now business take randomly 10 bags from that 1000 bag & inspected. The Bags are inspected on various parameters such as Weight , Fabric , Valve Size , Cross Sec Area, Print Quality , Stitching Thread , etc . The values for all this types of parameters are prepared in an excel sheet in a prescribed format.
    The Values for each Quality Parameters are then matched with the desired prescribed average figures.
    Based on the Values which deviate from "Average" figures , deductions are computed
    Logic is 1% for single defect in a bag for 1 parameter . Likewise if more defects is found then add 1% in multiples
    e.g 1% + 5 defects then .05 * basic Raw material cost .
    This figure along with proper description is recorded under "Remarks" column of the report format and send to Accounts department for the
      deduction process from Vendor
    we need to capture the inspection parameters in system as per the above process.
    And please tell me how I configure this process in SAP .
    Thanks & Regards,
    Bubai

    Hi Bubai,
    you can create a QM Control Key (which is used to QM View of Material Master) which you have to set the indicator Block Invoice. This indicator is blocked invoice with blocking reason I (I = Inspection) if there is still no usage decision for the inspection lot or the inspection lot is reject.
    (SPRO -> Quality Management -> QM in Logistics -> QM in Procurement -> Define Control Keys).
    Best Regards,
    Apostolos

  • IDOCs not created for Payment method "P" and "B"

    Dear Experts,
    I have executed the Automatic Payment program for three payment methods (P,V and B - Foreign Currency) in one Run ID. Payment run was successful but it has created IDOCs for the documents / Vendors attached with payment method "V" but IDOCs were not created for the payment methods "P" and "B". I have checked the configuration relating to payment methods and those were assigned with Form details and the maximum amount is also defined in the payment methods.
    Can any one suggest me where I had made the mistake / where I need to check the configuration settings.
    Thanks a lot.
    Regards,
    Ramnath.

    Hi Surya,
    Please find below error log created while executing the Payment run for the issue.
    Step 002 started (program SAPFPAYM_SCHEDULE, variant &0000000116195, user ID V-PIZHA)
    Step 003 started (program RFFOEDI1, variant &0000003957078, user ID V-PIZHA)
    Maintain an output device in your user master record
    Job cancelled
    Thanks and Regards,
    Ramnath,
    SAP FIMM Team

  • Error in Setup Tables for QM Inspection Lots

    Hi,
    I have an issue when I attempt to fill the setup tables for QM that I receive the following error for the Inspection Lots (QV) only. When I fill the setup tables for Notifications and Inspection Results, then these are OK and use the same standard function module 'qmex_inspection_lot_import_ini'.
    "Internal error in program SAPLQMEX, function module / subroutine qmex_inspection_lot_import_ini, code 1".
    Has anyone any ideas of the cause or have you experienced this before?
    Thanks,
    Scott

    Hi,
    The most likely reason that leads to the above error message in your
    system is an inconsistency of the inspection lots.
    To get the inconsistent inspection lot,please check your system in the
    following way:
    - transaction OLIQBW for running Setup table
    - switch on debugging mode
    - set break point in the function  QMEX_INSPECTION_LOT_IMPORT_INI
    on the line:
    ELSE.
       MESSAGE e011(qmex) WITH sy-repid
                               'qmex_inspection_lot_import_ini'
                               '1'.
      > then excecute F8 to go to this break point.
    - double klick on ' l_qals-prueflos'
    on line 77 in the same function  QMEX_INSPECTION_LOT_IMPORT_INI:
    READ TABLE qave_tab INTO l_qave
                        WITH KEY prueflos = l_qals-prueflos  <      here !
                        BINARY SEARCH.
    Please check following note:
    305244 Missing operations for the inspection lot
    89541 Inspection lot exists w/o status object: EM BS001
    536769 Inspection lots without status object
    Thanks,
    Venkat

  • Reverse GR after the Quality has passed the inspection lot

    I have a situation where the GR was done, Quality has approved the materail, now we are trying to reverse the GR...the system is giving error when trying to cancel the GR...
    "You cannot cancel GR, since inspection lot is already partly posted"
    How can I reverse this GR,
    PLease advice,
    Sam

    hi sameer
    To be able to reverse a stock posting for an inspection lot, the following conditions must be met:
    A usage decision has been made for the inspection lot.
    The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
    If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting
    Reversing Stock Postings  
    Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
    The initial screen for creating a goods receipt for a purchase order appears.
    In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
    In the field for the purchase order, enter the purchase order number for the original goods receipt.
    You can copy the purchase order number from the inspection lot.
    Choose Enter to display the selection screen for the purchase order items.
    Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
    Save the goods receipt and exit the Materials Management component.
    Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
    The initial screen for changing a usage decision appears.
    Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
    To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen
    regards
    thyagarajan

  • Payable Invoice has not created for internal requisition. ( R12.1.3)

    HI,
    This is an issue where i am facing for which the invoice has not created for the internal requisition, whereas the Receivables Transaction has created automatically for the same internal SO.
    Is there any way to find out the invoice, because i have again ran the Report "Create Inetrcompany AP invoice" and when i mchecked in the log it says 0 fetched invoice....
    Kindly help me out to solve this issue,
    Thanks in advance.
    Vijay

    Hi Vijay,
    Did you check in AP_INVOICES_INTERFACE table if there are some records with INVOICE_NUM like '%AR invoice number%'?
    If no records in the interface table - can you please, check by submitting the program without giving any input parameters?
    Regards,
    G V Ranjith

  • Inspection for HU: inspection lot not created upon packing

    Hi All,
    I want to inspect a material by Handling Unit, I have set "Inspection for HU" within the Inspection Setup of the material master. I created PO and inbound delivery, in the inbound delivery I did packing, but inspection lot is not created after packing. When I go on with MIGO, system throws error message "Change the inspection stock of material in QM only", according to this message, there should be an inspection lot already created, but I cannot find it in QA32.
    Regards
    Danny

    Hi,
    There are two prerequisition:
    1) Check configuration setting : SPRO --> Logistics - General --> Handling Unit Management --> Basics --> Technical Basics--> Materials Management--> Inventory Management --> Set QM Check and Delivery Type for Each Movement Type. the respective movement type is not deactivated for quality inspections. The indicator QM not active is not set.
    2) In material master, Handling unit should be active for inspection type.

  • Customer number not in the inspection lot for a make to order scenario

    Hi All,
    I know that standard SAP will get the Customer number into Insp. lot only for insp. types 10/11/12.  I am wondering if someone know a way to get the customer no. into insp. lot for insp. type 04 where the material is make-to-order scenario and the Production/Process order has the Sales order and customer no. without activating User-exit.  The quality users want to be able to see the customer no. in insp. lot without having them to go to process order. 
    It makes no sense to me why the customer no. is not brought into insp. lot when that is available in the Prod/process order, which can further be used to select the customer specific insp. plans for 04 insp. type Insp. lot without using Variant configuration.
    Any light on this topic is appreciated.
    Thanks.

    Hi Srikant,
    I guess.........
    Normally the inspection lot refers the triggering document that are the trigger cause for them.
    - Inspection type 01: - Purchase Order and GR material document.
    - Inspection type 03: - Pro. Order Number
    The same way...
    The inspection type 10\11\12 are purely related to the SD, and directly integrates QM and SD. Hence in the inspection lot for the inspection types directly integrated to SD, it will furnish the Sales order number \ Customer.
    But the inspection type 04 is purely have it's relation to Production process. So it will have the details related to integrations it has i.e. the "Pro. Order." Hence it integrates QM-PP, it have the data related to PP (Pro Order), not the SD's one.
    But I think one way you can achieve it,
    Assign the Customer number also to the inspection plan along with the Material. So I think at the time of assigning the inspection plan to the inspection lot, it will refer the Customer number also and will display the Customer number along with Task list Group\Group Counter, in the inspection specification screen in QA03/02
    Regards,
    Shyamal

Maybe you are looking for