Customize Toolbar not constantly working, have tried Safari View Customize Toolbar to no avail.  Thnx in advance.r... Drag your favorite item into the toolbar...

Customize Toolbar has been very "hit & miss" lately, attempts to add Google Search are failing.  I am using "Safari>View>Customize Toolbar> Drag" with little success.
Any suggestions appreciated, thankx in advance.

Ah - I read your initial question as to how to set Google as the search engine, rather than not having the Search field present in the Toolbar.
First, make sure Show Toolbar is set in Safari's View menu - if it is set to show, it will state "Hide Toolbar" instead and you need not change that.
Then, also in the View menu, choose the item "Customize Toolbar...".
Click on the representation of that item (circled below) and drag it to the right end of the Toolbar, between the Address box and the edge of the window. A position marker should appear, at which time you can release it.

Similar Messages

  • When I try to customize my toolbar and drag my favorite item to existing toolbar it is grey and won't open

    when I try to customize my toolbar and drag my favorite item to existing toolbar the item is grey and won't open

    What item are you dragging into the dock (not toolbar - not windows).

  • My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

    My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?

    Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
    recovery mode restore as descibed in HT1808 might be  your last resort though

  • HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

    I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
    2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
    Please advise.
    Thanks,
    Bob

    Copy the entire /Music/iTunes/ folder from old computer to new computer.
    See this -> http://support.apple.com/kb/HT4527

  • HT4623 I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

    I tried to update my ipad with IOS7, it crashed!!!!!! now my ipad will not work, have tried to restore the ipad, will not restore, help please??

  • Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

    Ok this is bizzare!
    Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
    So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
    AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
    I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

  • I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    I have iphoto 6 and my pictures are no longer showing.  I have tried importing them but it just give me an error msg. (file format not recognized) I have tried rebuilding the iphoto library but that doesn't work either. Any suggestions?

    How did you rebuild?
    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

  • Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the full erase reset and nothing seems to work. Any suggestions?

    Mac and iPad connect to wifi, iPhone will not. I have tried all resets besides the "erase all contents and settings" and nothing seems to work. Any suggestions?

    http://support.apple.com/kb/HT1414
    I would honestly try this. It is how to restore your phone and see if it works.

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

    Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

  • How can I delete purchases from my itunes account that I DID NOT PURCHASE I have tried everything for a VERY LONG TIME please please help

    I have had an iTunes account for 3 years. I have tried for at least two years to delete these purchases that I did not purchase off my iTunes downloads. I have tried everything. I took iTunes off my computer, redownloaded . I have tried deleting and removing them. I do not know how they got there but everytime I go to download anything these 8 purchases start to download. I then have to pause them all and back to the agganizing termoil of trying to delete them off my account. Can you please please help meI am beyond aggrevated because nothing I do deletes these things off, and I have tried for two years with no results but more aggrivation.

    I would contact Apple Support either on the phone or via e-mail and have them check if they could remove these questionable purchases off your account.
    There is currently no way to do this on your own.
    And re-installing iTunes does not help as all the purchase info is stored on Apple's servers.

  • My macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty.

    my macbook pro running lion will not boot . it stays on the grey page with the cog spinning. I have tried all methods of booting to no avail. I have removed the bottom and taken out the battery and the ram . will this affect my applecare warranty. I had to try myself as I'm overseas for two months and nowhere near any sort of help .

    there was a recent software update that seemed to screw HDV up.  Do some searching here over the last month or 2 and you'll find a bunch of posts and some possible solutions.
    Worst case scenario, do as Shane suggests.  But might I suggest you take a look at the user tips section of the forum.  there are some great tips on how to prevent these sorts of problems by cloning your startup drive, etc.

  • HT201412 My iphone has completly stopped working have tried holding the sleep wake buttons etc and an apple icon appears but then goes and nothing happens.

    My Iphone 5 has completly stopped working, have tried holding the sleep wake buttons etc but still no responce, there is an apple icon that appears but it then just goes agsin, any ideas.

    see here
    http://support.apple.com/kb/HT1808

  • FF not responding I have tried everything.

    I have tried clean install and disable of addons .I even had AT&T connect tech try to fix the problem.I hope you can help.
    Thanks

    Hello joejoe186, any luck if you boot the computer in [http://windows.microsoft.com/en-hk/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) ?
    (If works in Windows Safe mode then probably you have problem with other software, like security software or maybe a system driver, that is running on your computer).
    thank you

  • I need help with fp, i cannot get it to work. have tried everything

    i cannot get fp to work.  I have uninstalled and installed so many times.  I use IE9....it worked two months ago.

    thank you for your reply.  I am using Internet Exp. 9 and McAfee software.  It states it installs and when I open a video, receive message I need to upgrade.  I followed the directions for 32 bit vs 64 bit.   Adobe FP is under my programs????
    > Date: Thu, 8 Sep 2011 05:17:21 -0600
    From: [email protected]
    To: [email protected]
    Subject: I need help with fp, i cannot get it to work. have tried everything
    It won't work or just won't install?
    Which OS, browser(s), and anti-virus software are you using?
    If you're using the free Avira AntiVir(us) Personal software, then deactive the Webguard feature first before installing the Flash Player.
    >

Maybe you are looking for

  • Camera roll says downloading

    photos camera roll has been saying downloading for weeks. Some pictures appear and some don't

  • Editing in Photoshop CS2 and Viewing in iPhoto

    I have iPhoto 6 and Photoshop CS2. I would like to do my RAW file edits in Photoshop CS2, but if that image is already in my iPhoto library and I make changes to the file in Photoshop, will iPhoto regenerate a new thumbnail for the changes when I ope

  • How to create an interface if the class has a nested class

    I have the following class public class SampleImport{ public SampleResult import (InputSource xml) { SampleResult sampleResult = new SampleResult();           //do something           return sampleResult; public static class SampleResult {           

  • Document Numbering Series and Query Generator

    Hi Experts! I have a query with a Query! I have more than one numbering series, say one document series is YYY and the other document series is ZZZ.  YYY is for posting period 2009 Sales Order document numbers 1, 2 - 10.  ZZZ is for posting period 20

  • Trunking on SLM2024

    We are trying to implement a SLM2024 into our environment to be used on a  lab bench. I am trying to get trunked traffic from a Catalyst 4948 to  this switch. The Cisco documentation on how to do this on the 2024 is  not very good. Does nyon know the