Customizing a generic user on back-end for all portals users HR, is it pos
Customizing a generic user on back-end for all portals users HR, is it possible ?
Hi,
With SAP ECC 6.0, on HR environment, I need to create more 4.000 portals users.
I would like to find a customizing to create one generic user (with rule ESS / MSS) on back-end and create (import) 4.000 users on portal.
I think its should be the best practice to maintain userss access.
- What is your opinion on that ? Is-it possible to customizing this ?
- Have you a solution ? What is the custonizing to create ?
Thanks for you answers.
Adam,
I have moved this topic into the [link=http://technet.oracle.com:89/cgi-bin/forumdisplay.cgi?action=topics&forum=Oracle9<i>i</i>AS+SSO+and+Portal+Security&number=83&DaysPrune=20&LastLogin=]Oracle9iAS Portal SSO and Login Server forum[link] where it is open and can still be posted to.
Rich
Similar Messages
-
How to change the UWL refresh rate for all portal users.
Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.1. Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
From the Universal Worklist Systems, choose the system for which you want to edit the properties.
Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju -
Execute Webdynpro4Abap Application with same ERP-User for all portal-users?
Hi,
is it possible to let a Webdynpro4Abap application run with only one ERP-User for all portal-users? Therefore not needing an ERP-license for every portal-user?
Somekind of mapping maybe?
Regards
JanJan,
It is possible but it all depends on the type of application .If you want to show same data for all users you can use one user but if data is different for all users then you cannot go with this approach.
to configure single backend user for your application go to tcode SICF and look for that application and go to logon data tab by double clicking and give one common user details
Thanks
Bala Duvvuri -
HT201269 How can I set up same back up for all my apple devices
How can I set up same back up for all my apple devices
I use online tools all from apple devices 2 iPhone 5g & 5s & iPad mini
I want same back up for all devices
Specially I use appointments app
I don't want to loose any appointment
So can I use same backup for I devices
Please help !,,,,,You can also just use the same restore backup for all your devices you will get the same notifications BUT you have to click on Sync over wifi so it can work if not they will only work when you sync them when you sync on computer
-
SQL Express LocalDB as Back-end for MS Access
Can a MS Access front-end database be connected to the new SQL Express LocalDB backend on the same machine?
If the answer is YES, where do I find information about the driver/connection string?
This is what I’m trying to accomplish. I have a project that uses MS Access to collect data using stationary PCs located far from the actual data collection site. The use of Tablet PCs with the use of wireless network has been suggested to make data entry
more efficient so data collection is done at the point of inspection. The problem is that MS Access was not build to transmit data/be used in a wireless network environment, so my idea was to use the same MS Access front end (to save time by not building anther
FE and keep same interface for user) with a LocalDB as back end on the Tablet PC and have the LocalDB either at time interval send the data to synch to a network replica backend for everybody use.
If answer is NO, suggest a feasible approach with any other product of way to accomplish this data transmission.
Just so this post question is clearer a SQL Server is not be permitted in this site.
Thanks
IB_4Hi,
These threads may be helpful:
Using SQL Server LocalDB and Access across servers and platforms
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5fed23bd-5f2f-4dfa-a7d2-66ce5874f333/using-sql-server-localdb-and-access-across-servers-and-platforms
Link Access 2013 To SQL Server LocalDB Tables
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a05b7650-3ab5-4b3e-beb1-2094336c589c/link-access-2013-to-sql-server-localdb-tables
Meanwhile, your question is related to Access database. I would suggest you initial a new thread in Access forum for dedicated support.
http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=accessdev
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Tracy Cai
TechNet Community Support -
How to make custom icc color profile work as default for all users?
Hi!
I've calibrated two monitors for the machine running Mavericks OS X. I've managed to move these custom icc color profiles to ColorSync folder in HDD Library, so that that they are available for all the users. However, I cannot figure out how to make these icc profiles work as default profiles for all users and not only the one I used to calibrate monitors.
Is there a specific place I have to put custom icc profile to make it system default?
Thank you!If you put the profiles in the root /Library/ColorSync/Profiles/ folder, then each user needs to select them in their account. There isn't a way to apply them globally so each account automatically comes up that way.
-
Attachment transfer of PO from SRM to Back end for extended classic scenario
Hi Experts,
We are using the SRM 7.0 with EHP 701 and ECC 6 , we have a SRM requirement where we need to transfer the attachment of a PO to back end ECC. I tried to implement the note 1594966 , but it doesn't work . we are using Extended classic scenario. Please suggest some SAP notes or the procedure to be followed to achieve this.
Thanks ,
Aishwarya.MAs far as I am aware this functionality of transferring attachment is not supported in Ext classic scneario
http://scn.sap.com/thread/1873708
Also I suggest you should debug and see if its sending attachment from SRM if yes then
could be something missing at ECC side , To debug use this
http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=340264144
You may also check in SXI_monitor and see if attachment is being recieved and sent from SRM and ECC respectively
Are you configuring this for the 1 st time or its an error which u encountered?
You must raise a NOte to SAP for the same till a solution is found .
This one is another which you can check ..
http://wiki.scn.sap.com/wiki/display/SRM/Transfering+shopping+cart+attachments+to+the+backend+system -
Can we run F.28 in back ground for all customers.
Hi ,
Can we run F.28 for all customers in Back ground.
Thanks in advance.Yes
you can schedule this in the background
this will be like any other batch job you schedule
you will have to give the customer range that you want to execute or upload a list of customers befo9re you click on execute in background
hope this helps
Thanks
Prashant -
How can I set a customized view in finder set as standard for ALL folders?
As I have a large number of folders, I need a specific view in finder: symbol view, sort by program and name. I tried to use this settings as standard for ALL folders, but using the 'set as standard' button does only work for the folder I am in, but not for ALL folders. I even tried to use this settings on the hard disk level in finder, but what ever I tried, it never applies to all folders. The problem occurs on each of my devices and on Yosemite OS 10.10.1. as well as Mavericks 10.9.5. Any ideas on how I can make the 'standard' work on all folders?
As Vinod says, unique key validator would be fine.
However, In Gabriel's blog:
Performing a unique key validation for an attribute that is declared to be unique in the database requires a round trip to the database. This is quite expensive and there is a fast and easy way to work around it.Is false on several fronts:
1). it's not expensive - it's actually cheaper than the alternative
2). Unique key validator can require many trips to the DB to validate - it must check all other rows in the EO to ensure there is no duplicate, and all of those rows must be fetched into the middle tier to do the validation: this is expensive.
The "cheapest" way to do this: unique constraint in the DB
John -
Attachment missing in back end for purchase order
Hi all,
We are using SRM 5.0 SP10 extended classic scenario.
I have created a shopping cart with attachment. A local purchase order has been successfully created and i can find the attachment in it.
When i check in the backend the purchase order doesnt contain the attachment.
I have made the required changes in BBP_CREATE_PO_BACK. I have made necessary changes in DC10,DC20 and DC30.
I have checked the related threads in SDN but couldnt find any help.
Please let me know if this works only for classic scenario or the attachments can even be sent to backend in extended classic scenari as well. If yes please let me know what else needs to be done to be able to view the attachment in the backend.
Thanks,
Zubair.Hi Sanjeev,
Thanks for your reply. I have looked into both the BAdis. I couldnt understand how bbp_driver_determine BAdi could be useful to this scenario.
However i looked at bbp_ecs_po_out BAdi. It has IT_ATTACH as importing parameter but i couldnt make out how this BAdi could be used to transfer attachment to backend. It doesnt have a relevant exporting or changing parameter.
Please advice.
Thanks,
Zubair. -
How to find through back end for particular report any patches is applied
Hi,
How to find out any patches is applied for particular report.Are you talking about eBusiness-reports? Then post your quetsion in the eBusiness-forum OA Framework
-
Report on portal User ID and Assign Roles for all portal users
Hi!
I would like to know , is there way that we can get a report which shows all the portal user ids with there assign portal roles. If we can't get this from portal. Can we get it from Oracle database ?
What are the oracle tables and fields which store this information?
If nay one have a custom develop iview for this please let me know
Thanks
RameshHi Ramesh,
as Pascal stated (and as I did above), if developing within the portal is not really new for you, playing around with the UME API is really more or less trivial.
Check Portal User and Role info as well as User to Role listing for similar requests and code hints / further links.
Hope it helps
Detlev -
CTIOS: Call ended for all agents
Hello,
I have recently upgraded UCCE system from version 8.0 to v9.0
A week later (Today), an incident occurred twice a day:
At a certain time, all calls (with all the agents) got disconnected. The message Call Ended displayed at CTIOS desktop.
Then the call center went back to normal activity.
I tried to dumplog jtapi and call manager pim logs, as well as cti logs.
I also observed CVP logs at the time of the issue but I can't find anything significant
What could be the issue?
Thanks,
SaharHi,
I have gone through the logs and couldn't figure out the problem. As i can see the calls are presented to Agents even during the mentioned time(12:50 to 12:55). Kindly let me know if you still facing the problem, If yes check your network connectivity once and forward us the same set of logs with appropriate time zone or give the ANI or Agent details to narrow down the search.
Thanks,
Ganapathi.S -
Hi Guys,
We have made a client copy of the back-end system of SRM (SRM 5.0). Only the back-end and not SRM has been copied.
After replication all the master- and customizing data again to SRM from the 'new' back-end I have found an issue with updating the suppliers.
It seems that I can not remove old business partners from SRM with BUPA_TEST_DELETE if these are used already in SC's. However the new copy of the back-end system has completely different suppliers we need to use in SRM. This causes for an inconsistency with the supplier numbers, as we want to keep the R/3 numbers in SRM.
Does anyone has a good idea how to proceed? That is, how can I remove the business partners (suppliers) in SRM which were used before the client copy of R/3, so that I will be able to completely get all the relevant 'new' vendors from the R/3 system after the client copy.
When I execute BUPA_TEST_DELETE it will end up in error saying the suppliers can not be removed. Do I need to archive all the old documents (SC & PO) before I can remove all vendors in SRM, or is there a way to force the removal of all the business partners from before the back-end client copy?
Thx.
SkanderHi,
I already figured out how to solve the issue.
For anyone who wants to know how to:
-First clear the vendor groups in the vendor hierarchy; do not renove the root node
-Then run BBPGETVD which will get you the new vendors from the back-end; for me only role LF for suppliers.
-Then run BBPUPDVD which will update all the fields for the old business partner numbers in SRM which were used in documents, and replicated from the old back-end system.
In my case I had to play a litlebit with the setting 'only creditors', to update BP numbers which were not suppliers in the new back-end.
After performing these steps everything should be fine.
So it's perfectly possible to make a client copy of only the back-end system without copying SRM (in the classic scenario that is).
Rgds,
Skander -
SAP BI back-end Vs SAP BO back-end
Hi Friends,
Purchasing SAP software packages - bought SAP NW 2007s package (included SAP BI) and SAP BO XI suite (included Data Integrator (DI) as part of the BO XI package).
We have below scenarios and discussions around these scenarios - please advice the best practice/method:
1. ECC - > SAP BI(back-end) for storing ECC and other legacy data->BO reporting tools like Crystal Reports, WebI, Xcelsius etc.,
2. ECC -> BO(back-end) for storing ECC and other legacy data using DI for setting up the ETL process -> BO reporting tools like Crystal Reports, WebI, Xcelsius etc.,
3. ECC ->use BI and BO as back-end system -> BO reporting tools like Crystal Reports, WebI, Xcelsius etc.,
Does anyone have reasoning to use both back-ends? The BI and BO packages include the back-end and I think it is up to the customer to choose either one as data warehouse system. Thinking that SAP may also have different package combinations to have either BI or BO back-end to use as data warehouse system which may reduce the license, implementation and maintenance cost.
When it comes to scenario 1 and 2 u2013 How BO ETL handles the massive data extractions, error handling, and parallel extraction and performance issues compared to SAP BI?
Please provide your thoughts in approaching the specific scenarios? It would be great if you could also provide some web links precisely relevant to this discussion.
Thanks,
SudhaHI,
just to clarify: in the BusinesObjects Enterprise system you not storing data.
1. ECC - > SAP BI(back-end) for storing ECC and other legacy data->BO reporting tools like Crystal Reports, WebI, Xcelsius etc.,
>> for sure possible
2. ECC -> BO(back-end) for storing ECC and other legacy data using DI for setting up the ETL process -> BO reporting tools like Crystal Reports, WebI, Xcelsius etc.,
>> you would then use something that is called a Rapid Mart for example
3. ECC ->use BI and BO as back-end system -> BO reporting tools like Crystal Reports, WebI, Xcelsius etc.
>> yes.
Both backends have a different purpose. BusinessObjects is reporting and BW is a datawarehouse.
Ingo
Maybe you are looking for
-
Client can no longer see inbox for IMAP
A direct quote from a end user that is using IMAP and outlook. "yep was working fine when i checked in the morning but i check about 6.30, as i checked it flashed up that the server was in off line mode, my inbox was still there i tried to open a ema
-
PR05 Transaction Iview from Abap Webdynpro
Hi, From abap webdynpro, on action of one button, i'm calling PR05(Travel Expense Manager) screen by passing the parameters as follows and calling NAVIGATION_ABSOLUTE method: BUS_PARAMETER-KEY = 'PTP00-PERNR'. BUS_PARAMETER-VALUE = LS_EMPLOYEE_NODE
-
Prevent iWeb from downsampling on publish
Hello, I am trying to use iWeb (v9 - 3.0.1) to share photo's with others. However when publishing iWeb always seems to downsample my pictures. While my eyes can't directly see the difference the size of the published photo's is half to a third of the
-
Oracle Automated startup & shudown on Linux 6.0
I am trying to get make my Oracle database shutdown and startup automatically at boot, but am having a hard time getting this to work properly. I have created a file in /etc/rc.d/init.d called dbora: case "$1" in 'start') su - oracle -c $ORACLE_BASE/
-
Updated to 1.4.1 from 1.4. Printing is back to the ugly magenta - not as bad as with 1.3.1, but printing was perfect with 1.4 I printed the same file from Lightroom, from Aperture & from Adobe photoshop CS3. Printing from Aperture & from Adobe photos