CYAN color range (0 to 100 %) convert to spot color
Hi
We have around 1000 eps files with different cyan values for ex cyan at 40 % or 60%, we require the cyan value to be changed to Pantone 801 C.
Any script would be great help for us.
Regards,
Vinoth
tell application "Adobe Illustrator"
tell current document
set theList to every path item
set sw to every swatch
repeat with i from 1 to count of sw
set swname to name of item i of sw
if swname = "Dark Green" then
set swco to color of item i of sw
repeat with k from (count of theList) to 1 by -1
set co to fill color of item k of theList
if swco = co then
set fill color of item k of theList to {cyan:0.0, magenta:100.0, yellow:0.0, black:0.0}
end if
end repeat
end if
end repeat
end tell
end tell
Similar Messages
-
Convert from spot color to custom CMYK value in Applescript
I thought this would be very simple and it's not apparently. I am trying to convert a spot color into a custom CMYK value. Basically:
tell application "Adobe Illustrator"
set theList to every path item of current document
repeat with k from 1 to count of theList
if fill color of item k of theList = {name:"Dark Green"} then
set fill color of item k of theList to {cyan:0.0, magenta:100.0, yellow:0.0, black:0.0}
end if
end repeat
end tell
But this script obviously doesn't work. From what I can tell, the fill color simply returns the tint of the item, not the name of it. I can't find anything that returns the name of a spot color so I can set the correct corresponding color. In the above example, I made the color obviously changed so I could visually see the result.
Any advice would be greatly appreciated! I'm a first time poster here.
Thanks!tell application "Adobe Illustrator"
tell current document
set theList to every path item
set sw to every swatch
repeat with i from 1 to count of sw
set swname to name of item i of sw
if swname = "Dark Green" then
set swco to color of item i of sw
repeat with k from (count of theList) to 1 by -1
set co to fill color of item k of theList
if swco = co then
set fill color of item k of theList to {cyan:0.0, magenta:100.0, yellow:0.0, black:0.0}
end if
end repeat
end if
end repeat
end tell
end tell -
I have a Canon MX880. It quit printing with the cyan color for no apparent reason.
I have a Canon MX880 printer. For some reason, it no longer uses the cyan color with printing. I have all colors except those that need cyan. The cartridge is full. Cleaning didn't help.
Solved!
Go to Solution.Hi br3753,
I know you mentioned already doing cleanings, but I wanted to recommend if you havent already done so to please try 3-4 consecutive cleanings for the best results. If this does not work I would recommend using the Contact Us link to get in touch with out live support staff who can provide warranty options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
How to compensate Cyan color with other colors with using profile
Hi Guys,
I am using Adobe Illustrator CS3. Mac OS 10.4.11. I need a help regarding color compensate. let me explain clearly. I am doing a project in that i need to delete Cyan color and need to compensate with MYK colors. Is there any short way to get with good result.
FYI: we have UCR (Under Color Remover) profile which is for Black. With using this profile we can compensate black color with CMY with good result. Like this way only I want Cyan color compensate.
Is there any profile or method for that. If there, please share with me....
HARII am doing a project in that i need to delete Cyan color and need to compensate with MYK colors. Is there any short way to get with good result.
You are getting rid of the C channel completely and trying to create the same color balance usign the M,Y and K plates? Quite simply - impossible unless your images have a narrow color spectrum. The K to some extent can be used to replace a lot of the density normally associated with the C. But there is a large part of the color wheel that you cannot produce with no C at all.
with actions and scripting it is not possible. because all the images are different, we need to work according to image.
This is not true. Actions are probably more powerful than you are aware and can be designed to bring up dialogs to allow you to tailor each image to your needs. -
Spry menu bar cyan-colored controller non-responsive
The cyan-colored controller that enables users in CS4 to configure spry tabs has suddenly stopped working, evidently after I made a change in width setting for spry tabs. The controller no longer works in the site in which I first experienced the problem and,for that matter, in another new site I made for testing purposes.
Is there a fix for this? Would re-installing Dreamweaver C4 fix this?
Thanks for your help. I attach a file showing the cyan-colored tab to which I am referring.
Professor BobBob,
I don't have answer for you because I don't use the spry menus and haven't seen this problem on the occasions I have experimented with it.
If you don't receive an answer here, you may want to visit the forum dedicated to the Spry Objects: Spry forum
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap -
When I shoot in "raw" mode my files are in the 12 to 15 MB range. If I convert the file to "Tiff" the file converts to about 35MB. When I convert to a "tiff", does this mean I can make larger prints?
When I shoot in "raw" mode my files are in the 12 to 15 MB range. If I convert the file to "Tiff" the file converts to about 35MB. When I convert to a "tiff", does this mean I can make larger prints?
No, that only means, that your raw format has a better compression. Converting to TIFF will not add any better resolution. Not the file size does count for better prints, but the pixel size - the width and height of the photo in pixels. -
The cyan color won't print when using our HP Pro 6500 Officejet printer
the cyan color won't print when using our HP Pro 6500 Officejet printer. Can I get help with this?
This doesn't make sense. The printer is exhibiting behavior noticed when a network printer is connected to a laptop while the laptop is connected to a VPN. But in this case, neither the printer is connected on a network, not is the laptop connected to a VPN per se.
Are you sure all the latest drivers for your laptop have been installed? That's pretty much the only thing I can think of right now.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee. -
How to Generate Gaussian Distribution for a given range say [0,100]
Hello all,
Iam looking for a Gaussian Distribution for a given range say [0,100]. I dont have the mean or the standard Deviation. Also iam not that good at Statistics.
For this range [0,100] : the mean according to my knowledge should be : 50.
Now it is Standard Deviation : i dont have it but i dont want any negative values
I have got the following formula :
double val= Math.round(r.nextGaussian() * std + (range)/2);
where range is 100 which is obtained by subtracting the hi val - low val.
As i dont have std dev i cannot use the formula above.
My question is :
1. Can we get a normal/gaussian distribution for a given range, say [0,100] without specifying standard deviation. Is there any formula for it.
Reg
SankutA Gaussian distribution cannot be bounded; as previously noted, if it is it's not Gaussian. However, you can effectively approximate bounds. A range of
mean +/- 4 standard deviations (SD)
will include 99.997% of all observations. If we set (mean - min) equal to 4 SD, it will include "all" low-side observations. So,
4 SD = (50 - 0)
1 SD = 12.5
The Java method provides a distribution with a mean of 0.0 and a SD of 1.0. The formula the OP posted can be used then to adjust its output to what is wanted:
number = Randon.nextGaussian() * 12.5 + 50;
As a test, I ran a sample of 1000 and got the following distribution:
VALUE FREQUENCY
<5 0
6-15 1
16-25 21
26-35 90
36-45 222
46-55 341
56-65 220
66-75 84
76-85 19
86-95 2
95 0If 3 SD is used instead of 4 SD, the range will include 99.7% of all observations. -
Spry horizontal menu cyan colored controller non responsive
The cyan-color controller that allows me to enter the spry menu to make changes has suddenly stopped responding, leaving me unable to to interact with the the spry menu tabs. This problem seems to have started when I made a change in the width of the tabs.
Is there a solution to this problem? How can I fix this? An image of the non-response controller I mean is attached
Thanks for your help.
Professor BobBob,
I don't have answer for you because I don't use the spry menus and haven't seen this problem on the occasions I have experimented with it.
If you don't receive an answer here, you may want to visit the forum dedicated to the Spry Objects: Spry forum
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/
http://twitter.com/nadiap -
Pro L7580 quit printing Cyan color.
Diag Page is showing no blue on the Test 1 or 2.Hey ckayv,
Often times this is an issue with the printhead in the Officejet Pro L7580 series All-in-One that you are describing. However, before going to the expense of changing out the printhead I would advise taking a look at the steps in the document linked below.
Troubleshooting Print Quality Issues
If the troubleshooting is unable to fix the print quality issue, then you have a couple of options at this point.
You can replace the printhead (Cyan/Magenta printhead). The printhead is the 88 Cyan and Magenta printhead and can be obtained from many HP retailers, such as where you purchase your cartridges.
You can purchase a new printer that doesn't have a problem with the printhead.
Hope this helps,
Jason
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee. -
Print Alignment Failed and Cyan color not printing on Officejet 8500 Primier
The Alignment Fails and the Cyan color is not printing.The Cyan cartridge was low and was failing to add the blue color. Even though it was not empty, I replaced it. After doing so it went through the alignment process and I received an error message "Alignment Failed" I proceeded to take the following troubleshooting steps: 1. Cleaned printhead & Alignment through the printer tools2. Reinserted the Cyan ink cartridge, cleaned & aligned printhead3. Turned the printer off, unplugged the power cord from the back of the printer for one minute and then plugged back in. I then went through the alignment again. None of these troubleshooting techniques worked. The only thing I have not done, is replace the printhead. They are so expensive and I'm worried that this may not be the issue.
Hi DavidM2,
Welcome to the HP Forums.
I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you are still having issues then try to replace the cartridges.
Let me know how you make out and if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Convert CMYK+SPOT (only selected bands) to RGB
Hello,
My context:
I am dealing with multi-band TIFF files - CMYK + one or more SPOT colors.
I am able to read the multi-band TIFF file using JAI and read the number of bands correctly.
Also, I can read the value for any band for any pixel.
For the SPOT colors I have Pantone CMYK equivalents.
The bands are 8 bit in size.
My problem:
I need to be able to show/hide one or more bands and display the result.
Is there a (mathematical) formula for converting CMYK+SPOT color bands to the RGB color space?
A simple example:
(CMYK scale 0-100)
All bands: C, M, Y, K, SPOT1 (C=100,M=100,Y=0,K=0), SPOT2(C=100,M=0,Y=100,K=0)
Bands selected: C, M, SPOT1
PixelX values: C = 50, M = 10, SPOT1=80
Can we calculate PixelX's RGB values to display on screen?
Is there any documentation I can read anywhere on the subject?
Thanks in advance,
GeorgiWhile I have never tried it, you might find this interesting: [cmyk to rgb|http://bytes.com/topic/java/answers/16180-rgb-cmyk].
-
How to convert a spot colour to a spot colour.
I'm curious to know how do i go about converting a spot colour to a spot colour e.g. pms 188 to pms 281?
so therefore it changes from 2 colours to 1 colour, I'm using Acrobat x Professional on MAC, I dont have any other software of adobe's just this.
Can someone please suggest any quick ways i can do this without the possible need for plugins or extensions, if there is a plugin or extension that can do this please can you list them.Hi daniel013462,
Thank You for posting on the forums, Kindly check the url mentioned below, hope it helps.
http://helpx.adobe.com/acrobat/using/color-conversion-ink-management-acrobat.html
Thanks,
Vikrantt Singh -
How do I get HP to comp me for cyan color cartridge that quit working? CP1215
Two months ago I purchased a new cyan ink cartridge. The printer had been working fine until a couple of days ago. I got this error message: catridge memory error on cyan.
It says for me to replace the cartridge. This is for HP Color LaserJet CP1215. Shouldn't HP at least comp me because the cartridge stopped working long before it should have.Hi @pgas ,
I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
Thanks for visiting the HP Support Forum
I work for HP. However I speak only for myself, not for HP nor anyone else -
Cyan color in Photoshop CS6 appears as black
Hello!
I've recently picked up Photoshop CS6 and i'm having a weird problem regarding the color cyan.
Whenever i use this color it appears as black.
How do i get this fixed??? im clueless
EDIT: When i drag the window im working in around the colors appears as normal but as soon as i let the window go, the cyan turns black again.Hi Conroy,
Thanks for the help, but i have the latest version of my AMD graphic Card but still the same problem cyan appears as black.
Dont know still what to do i never had this problem befor :S.
Maybe you are looking for
-
on my IMac the internal speakers have ceased working - in the sound preferences area only digital out sound is there no internal speakers to choose so unless I connect external speakers I have no sound
-
Hi, Is it possible to set approve action as auto on APPROVAL tab in CMS (NWDI)? I mean that as soon as SC reaches to Approval tab, the status should change to approved.
-
I rented a movie last night on my ipad but I am unable to download it on my ipad I have no space.. so I want to watch it on my laptop computer but do not know how to get the rented movie on it. I checked the itune store and they said I have it rente
-
Set Permissions problem with DW
Is there an issue with DW (I am using DW CS4) setting permissions for folders or files? I tried setting permissions to a couple of files in DW by right-clicking the file. The File Access Properties dialog box appears, I set permissions, click OK, and
-
Grabbing Old Episodes of Podcasts
Is there a quick and easy way to download all OLD episodes of a podcast? I often discover a podcast that has been around for a while and perhaps has 50 or more old episodes. I can not seem to find a way to select all the old episodes and que them for