"D" (Develop Loupe View) shortcut ignored in some cases

When in "Spot Removal", "Red Eye", "Graduated Filter" and "Adjustment Brush" modes, the "D" shortcut key is ignored. This is strange as all the other shortcuts, such as G (Grid View), E (Library Loupe View), C (Compare View) work fine.

You can press the active tool's shortcut to dismiss it. For example, hit K to activate the Adj. Brush and hit K again to dismiss.
Hitting Enter also dismisses any active develop module tool.
But D, never did what you're asking to.

Similar Messages

Shortcut only in some cases

hi! I have 2 buttons (btnDelete and btnClear), which are activated when an item of a listview is selected. Each button has a quick access.
<Window.InputBindings>
<KeyBinding Command="{Binding DeleteCommand}" Modifiers="Control" Key="D"/>
<KeyBinding Command="{Binding ClearCommand}" Modifiers="Control" Key="C"/>
</Window.InputBindings>
What I need is that the command is activated only when the button is active and not always. You may do this with xalm? THX!

Ok, it looks like this is a bug in MvvmLight:
https://mvvmlight.codeplex.com/workitem/7659
Change the namespace of the RelayCommand class from GalaSoft.MvvmLight.Command to GalaSoft.MvvmLight.CommandWpf and it should work as expected:
using GalaSoft.MvvmLight.CommandWpf;
You may also call the DeleteCommand.RaiseCanExecuteChanged() method whenever you want the CanExecute method of the command to be called again.
Here is a complete example that works as expected:
ViewModel.cs:
using GalaSoft.MvvmLight;
using GalaSoft.MvvmLight.CommandWpf;
using System.Collections.ObjectModel;
namespace WpfApplication20
public class Article
public class ViewModel : ViewModelBase
public ViewModel() {
this.Articles = new ObservableCollection<Article>();
this.Articles.Add(new Article());
this.Articles.Add(new Article());
this.Articles.Add(new Article());
public ObservableCollection<Article> Articles {
get;
set;
private Article _selectedArticle;
public Article SelectedArticle {
get {
return _selectedArticle;
set {
_selectedArticle = value;
RaisePropertyChanged();
DeleteCommand.RaiseCanExecuteChanged();
public RelayCommand DeleteCommand {
get {
return new RelayCommand(Delete, () =>
return this.SelectedArticle != null;
private void Delete() {
Articles.Remove(_selectedArticle);
MainWindow.xaml:
<Window x:Class="WpfApplication20.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525">
<StackPanel>
<Button Grid.Row="0" Grid.Column="1" Name="btnDelete"
BorderThickness="2"
Command="{Binding DeleteCommand}"
ToolTip="Delete (Ctrl + D)"
Margin="5">

<StackPanel Orientation="Horizontal">

<Image Source="av1.png" Margin="5,5,0,5" Height="32"/>
<TextBlock VerticalAlignment="Center" Margin="5" FontWeight="Bold" Text="Delete"/>
</StackPanel>
</Button>
<ListView Name="lvl"
Margin="5"
Height="200"
ItemsSource="{Binding Articles}"
SelectedItem="{Binding SelectedArticle}"/>
</StackPanel>
</Window>
MainWindow.xaml.cs:
using System.Windows;
namespace WpfApplication20
/// <summary>
/// Interaction logic for MainWindow.xaml
/// </summary>
public partial class MainWindow : Window
public MainWindow() {
InitializeComponent();
this.DataContext = new ViewModel();
Once again, note that you must remove IsEnabled from the XAML markup.
Hope that helps.
Please rememeber to mark all helpful posts as answer and/or helpful.

Detail seen different in Develop view and Loupe view

I recently took some aurora pictures, and was adjusting them to put in a slideshow, and noticed something peculiar, i.e., that the details seen in the Develop module are less than those seen in the Loupe view in the Library. This is true in several pictures. The Develop view (2nd picture) is smoother and shows fewer of the fainter stars than the Loupe view (first picture). I hope it shows in the pictures below, which I created by using the Snipping Tool in Windows.
Why is this the case?
The problem is that the Slideshow results in LR seem to be closer to the Loupe view than the Develop view.
The Exif information is as follows:
and the adjustments I made were:
and
I'm using the LR 2014 v 8.7.1, Camera Raw 8.7.1.
TIA.

Hi Michael:
You're right. When I magnified the view to 100%, the results in the two modules were identical, as you said.
It does, however, raise a practical difficulty for me. With these kinds of long exposure, high ISO pictures, if I zoom in to 1:1, I find it extremely difficult to make any adjustments because the noise is so high. I would basically set all the noise sliders to max, and the details to minimum. However, this results in overadjusting for noise and losing too much detail when the picture is viewed zoomed out to fit on a computer monitor as a slideshow. Usually, this is not a problem, but at the high ISO/long exposures of these pictures, I find it very difficult to work in the develop module at 1:1.

Preview Panel Appears Brighter than Loupe View In Develop Module

Settings and Hardware:
- Macintosh 15" Power Book G4
- Lightroom Version 2.1
- Attached Apple Cinema Display
- Mac OSX 10.4.11
When viewing Lightroom on the PowerBook monitor all is well and the Preview Pane shows the same brightness value. Yet when the Lightroom interface is brought over to the Cinema Display the Preview pane in the Develop Module is significantly brighter than the main image in the Loupe View.
Any help with getting the value of the Preview Pane to the same brightness value of the Loupe view would be of help. Or if there is a simple explanation as to why this happens, that would also be appreciated.
Cheers,
Jarrod.

Monitors should be calibrated at around 120 cd/m2. This is usualy around 2/3 brightness for Cinema displays and around 4 to 5 clicks back from maximum on a mac book Pro. If you don't, you'll think all your prints are far too dark.
>being a different luminance than the loupe view image on the same monitor
huh? I thought you were comparing between monitors?
Lightroom might not realize that you moved the entire interface to a different monitor and use the wrong profile or it forgets to use the different profile for the preview. This is very common even in managed apps. Lightroom does have a nice dual monitor interface now that uses the correct profiles for both monitors, but I don't think it likes the main window being dragged over.

Crop in Loupe View using Quick Develop

The ability to crop in Loupe view would be incredibly useful when processing offline images (I'm referring to Crop Overlay of course, not the simple, centred crop ratio currently available). This would be a tremendous help in the editing process. I also feel that for normal use, not having to go to full Develop would also create a much faster and efficient workflow for volume shooters. Cropping does not normally require accurate colour so preview quality is more than adequate for the task.

Wait!
Don't forget White Ballance dropper too!
And dont' forget to add fine-tune control to QuickDevelop palette!
(Suggested behaviour: click-and-drag of central(reset) button should bring fine-tune conttrol like click-and-drag numbers in Basic palette.)
And! give us Active histogram conrtol in library.
A'm always trying to drag it in Library by mistake...

How to get Materialized View to ignore unused columns in source table

When updating a column in a source table, records are generated in the corresponding materialized view log table. This happens even if the column being updated is not used in any MV that references the source table. That could be OK, so long as those updates are ignored. However they are not ignored, so when the MV is fast refreshed, I find it can take over a minute, even though no changes are required or made. Is there some way of configuring the materialized view log such that the materialized view refresh ignores these updates ?
So for examle if I have table TEST:
CREATE table test (
d_id NUMBER(10) PRIMARY KEY,
d_name VARCHAR2(100),
d_desc VARCHAR2(256)
This has an MV log MLOG$_TEST:
CREATE MATERIALIZED VIEW LOG ON TEST with rowid, sequence, primary key;
CREATE MATERIALIZED VIEW test_mv
refresh fast on demand
as
select d_id, d_name
from test;
INSERT 200,000 records
exec dbms_mview.refresh('TEST_MV','f');
update test set d_desc = upper(d_desc) ;
exec dbms_mview.refresh('TEST_MV','f'); -- This takes 37 seconds, yet no changes are required.
Oracle 10g/11g

I would love to hear a positive answer to this question - I have the exact same issue :-)
In the "old" days (version 8 I think it was) populating the materialized view logs was done by Oracle auto-creating triggers on the base table. A "trick" could then make that trigger become "FOR UPDATE OF <used_column_list>". Now-a-days it has been internalized so such "triggers" are not visible and modifiable by us mere mortals.
I have not found a way to explicitly tell Oracle "only populate MV log for updates of these columns." I think the underlying reason is that the MV log potentially could be used for several different materialized views at possibly several different target databases. So to be safe that the MV log can be used for any MV created in the future - Oracle always populates MV log at any update (I think.)
One way around the problem is to migrate to STREAMS replication rather than materialized views - but it seems to me like swatting a fly with a bowling ball...
One thing to be aware of: Once the MV log has been "bloated" with a lot of unneccessary logging, you may perhaps see that all your FAST REFRESHes afterwards becomes slow - even after the one that checked all the 200000 unneccessary updates. We have seen that it can happen that Oracle decides on full table scanning the MV log when it does a fast refresh - which usually makes sense. But after a "bloat" has happened, the high water mark of the MV log is now unnaturally high, which can make the full table scan slow by scanning a lot of empty blocks.
We have a nightly job that checks each MV log if it is empty. If it is empty, it locks the MV log and locks the base table, checks for emptiness again, and truncates the MV log if it is still empty, before finally unlocking the tables. That way if an update during the day has happened to bloat the MV log, all the empty space in the MV log will be reclaimed at night.
But I hope someone can answer both you and me with a better solution ;-)

Grey thumbnail, grey loupe view-- no photograph displayed in library mode

When I import a new batch of photographs my library mode, both in grid and loupe view will not show my new photographs. And not that it just takes a bit of time to load-- the picture will not show, only gray. This has only happened in the last month or so. Previously everything worked well.
To get my pictures showing I have to go to develop mode and view them. The loading is taking considerably longer than it used to as well. I've been into my preference pane and can't see what to do. As per a tutorial I upped my "Camera Raw Cache Settings" to 50 GB. The problem hasn't coincided with this change however. I don't know what is going on but I am frustrated to have all photos load but not show up in Grid or Loupe mode.
Any ideas? I have over 7,000 photos in library. I've validated and checked library and it comes back okay.
Thanks for your help.
My computer is a newer 27" imac so I should have plenty of juice to run the program. Hard drive space isn't an issue as I have a 1TB.

Sounds like a corrupted preview cache. Let's test that theory. Close LR. Find your catalog on your hard drive, and rename the Previews.lrdata or move it to another location - you can delete it later when we know the new one's ok. Now restart LR, go to Grid view, select all and go to Library menu > Previews > Render Standard Previews. Hopefully that'll bring back your previews and if everything looks correct, you can then delete the previous one.

Error message in loupe view

I'm using Lightroom 1.3.1 in Windows XP. Sometimes when I'm looking at pictures in a library using loupe view, instead of seeing an image I see a grey rectangle where the image should be. At the top of the rectangle there is an error message that says "There was an error working with the photo." At the lower left hand corner of the rectangle there is a message written upside down in red letters that says "Error - A2of Memory - B". Once this problem happens I can no longer display images that were previously displayed normally. If I restart Lightroom it goes back to normal. I think this problem is more likely to happen if I am moving through the images rapidly, not giving Lightroom enough time to finish each preview. Is there some way to avoid this, besides going through the images very slowly?

HI friend,
Just check whether the error is due to the custom error message or standard error message.
If its standard then you have done any mistake which has makes the view to exit. If its custom message then it should change after you have changed the message.
If custom message , Just try activating it completely and check again. Goto SE80 and activate the function group and see is it showing any error.
Thanks,
Sri Hari.

Problem with loupe view after upgrade to LR 2.3

Has anyone had any problems similar to this? I could use some help. In the library module when I go to loupe view I don't see the selected photo, instead it gets frozen up or something. For example, if I open up a web browser on top of LR the image of the web browser is stuck in the loupe view. Any help would be greatly appreciated!

Thanks for your reply.
I can try with 1.5 (not installed on the server), but this is from the readme file:
1) To use APEXExport, a JDK of version 1.4 or greater must be used. Additionally, the Oracle JDBC
20 class libraries must be in your CLASSPATH.
So apparently, the JDK requirements didn't change.
Matthias

Missing Loupe View File Info

I use the File Info feature a lot in Loupe View. However recently it does not show despite selecting it in the View>Loupe Info Menu. Control+I also fails to work. It happened before recent upgrade so do not link it with that software change.
In the past I occasionally had to reset the viewing option to reinstate visibility, for no apparent reason. Has anyone had a similar problem and found a permanent cure? Thank you.

Hal, thank you. Yes, I have tried all known short cuts. I forgot to mention I am using Windows 7 OS.
Strangely, I have just been into Develop module and the data is presented as normal there. Very odd!

Developing database views between Oracle and SQL Server tables

I am on Oracle 10.2, my organization has many SQL Server databases as well and has now made
SQL server as company standard so many new databases will be developed in SQL Server. It is of course
not possible to convert all Oracle databases to SQL Server, so a mix environment will exist. Two questions:
1. Is it possible to develop database views in Oracle (10g in my case) which join Oracle tables with tables in SQL Server 2008? If yes, how. I have seen some heterogeneous connectivity setup to connect SQL Server to Oracle, but not sure whether it is possible to develop a database view across two databases.
2. I know it is not a SQL Server forum, but many DBA’s know both Oracle and SQL Server. Is it possible to develop views in SQL Server (SQL Server 2008 R2 in my case) which join Oracle 10g and SQL Server 2008 tables? I know in SQL Server, there is way to set up linked servers, but do not know whether it is possible to develop views.
Thanks a lot for your insight.

You can create views that join local Oracle tables and remote SQL Server tables. I'm pretty sure you can do the reverse as well but I haven't personally done it.
However, I would be very concerned about the performance you'd get if you created that sort of view. You'd very frequently end up in a situation where Oracle has to pull all the data in the remote table across the database link in order to apply predicates and join the data locally. That could be disastrous from a performance standpoint.
Justin

Images in loupe view of library module of LR4 are not always focusing. Why?

Have just upgraded my whole system to get LR4 to work at an acceptable speed- including 16gb ram, 1TB hard disc. When importing RAW images are copying them to DNG and doing 1:1 prewiew at that time. After finishing working in the develop module when I try to look at the images in loupe view in library module many of the images remain unfocused- If i export as jpeg to hard disc they are fine.I need to be able to view ,rate and select images in LR

Sound like this bug Mark? http://feedback.photoshop.com/photoshop_family/topics/lightroom_4_3_bug_pixelized_image_pr eview

Problem: Loupe View Size & Histogram Info Gone

Somehow I pressed something that changed a setting and I can't go back. When I go to the Loupe view of a picture, its really small. The shooting info on the Histogram is gone now too. Even when I click over to the develop module is still small.
I can't figure out how to just reset the default settings for fix whatever got messed up. I can't find anything on google either. Thanks in advance for the help!

I tried to figure this out for hours now and think I am just too stupid.. Can anyone pretty please help me!!! AAAAAHHHHHHH!!!!!!

LR 1.0 not rendering photo in Loupe View

I can work with LR fine for some time and every now and then the application stops rendering the Loupe view.
It is possible to get back to the grid view but when i double click on the image to get the Loupe view it switches to the Loupe layout but doesn't render the image.
This has happened both in the meta data browser as well as the folder view.
Resolution has been to restart LR.
Operating system, Windows XP Media Center Edition with all the latest patches.

Oh sorry about that. yes, it's Windows XP. The betas installed and ran perfectly but the uninstall was pretty flawed and now I cannot install the commercial package.
I tried both manual and automatic cleansing of the registry to no avail. I would reinstall the beta if I had the binaries but I don't so I'm not sure what to do from here.

Loupe view does not show ratings flags or colors in lightroom 4.2

When i use lightroom on 2 monitors i look mostly at the loupe view on the second monitor to judge or cull my pictures. I can see the resultant stars, colors and reject flags on the grid view on the primary monitor. but i cant see the ratings on the loupe view. I sometimes get confused as to whether i actually rated or color coded a particular photo in a similar series, but i have to look back at the primary monitor to make sure. Am I missing something? Is there some way to have a large view of the picture but include rating info on the same screen?

The only way I know is to use the loupe View Options with "Common Attributes" included in the display.

"D" (Develop Loupe View) shortcut ignored in some cases

Similar Messages

Maybe you are looking for