Data Conversion Error Message

I am getting the following error when running a report in Crystal Reports 2008:
'Database Connection Error: '42000:[Microsoft][ODBC SQL Server Driver][SQL Server]Error converting data type varchar to datetime. [Database Vendor Code: 8114 ]'
I can run my stored procedure without error in SQL Server. When I add the stored procedure to a new, simple Crystal Report, it runs without error and data is returned. The Crystal Report that is getting the error has been converted from Crystal Reports 8 to Crystal Reports 2008. There has to be something in the way the report is passing data to the stored procedure that is causing the issue. Any ideas?

Hi,
After you open the report in CR2008, go to Database | Verify Database. You should get prompted again for the parameters. Enter them and try running the report.
There is a big difference in how CR8 and 2008 work with SQL. Verifying the database usually clears these issues up. If it doesn't fix, try browsing each field datetime to see which field Crystal is seeing as character.
Good luck,
Brian

Similar Messages

Data Conversion Errors for the last week

We've been running a simple Stream Analytics job for little over a month now with a very light workload. Input is Event hub and output SQL Server. We noticed today that we haven't received anything into SQL Server since 2014-12-08 (we don't receive events
every day so we only know that everything still worked on the 8th of December), so we checked the job's logs. It seems that job is failing to process all the messages: The value of "Data Conversion Errors" is high.
I wonder what could have happened? We haven't touched the client since we started the job so it's still sending the messages in same format. And we haven't touched the job's query either.
Has there been an update to either to Stream Analytics or to Events Hub which could cause the issue we're seeing?

I've followed word for word the TollApp Instructions (except the thing with NamespaceType "Messaging" that has been added to New-AzureSBNamespace).
I have 0 line in output, and this is the service log:
Correlation ID:
e94f5b9e-d755-4160-b49e-c8225ceced0c
Error:
Message:
After deserialization, 0 rows have been found. Possible reasons could be a missing header or malformed CSV input.
Message Time:
2015-01-21 10:35:15Z
Microsoft.Resources/EventNameV2:
sharedNode92F920DE-290E-4B4C-861A-F85A4EC01D82.entrystream_0_c76f7247_25b7_4ca6_a3b6_c7bf192ba44a#0.output
Microsoft.Resources/Operation:
Information
Microsoft.Resources/ResourceUri:
/subscriptions/eb880f80-0028-49db-b956-464f8439270f/resourceGroups/StreamAnalytics-Default-West-Europe/providers/Microsoft.StreamAnalytics/streamingjobs/TollData
Type:
CsvParserError
Then I stopped the job, and connected to the event hub with a console app and received that:
Message received. Partition: '11', Data: 'TollId,EntryTime,LicensePlate,State,Make,Model,VehicleType,VehicleWeight,Toll,Tag
85,21/01/2015 10:24:56,QBQ 1188,OR,Toyota,4x4,1,0,4,361203677
Message received. Partition: '11', Data: 'TollId,EntryTime,LicensePlate,State,Make,Model,VehicleType,VehicleWeight,Toll,Tag
33,21/01/2015 10:25:42,BSE 3166,PA,Toyota,Rav4,1,0,6,603558073
Message received. Partition: '11', Data: 'TollId,EntryTime,LiMessage received. Partition: '10', Data: 'TollId,EntryTime,LicensePlate,State,Make,Model,VehicleType,VehicleWeight,Toll,Tag
59,21/01/2015 10:23:59,AXD 1469,CA,Toyota,Camry,1,0,6,150568526
Message received. Partition: '10', Data: 'TollId,EntryTime,LicensePlate,State,Make,Model,VehicleType,VehicleWeight,Toll,Tag
25,21/01/2015 10:24:17,OLW 6671,NJ,Honda,Civic,1,0,5,729503344
Message received. Partition: '10', Data: 'TollId,EntryTime,LicensePlate,State,Make,Model,VehicleType,VehicleWeight,Toll,Tag
51,21/01/2015 10:24:23,LTV 6699,CA,Honda,CRV,1,0,5,169341662
Note the bug on the 3rd message. In my opinion it's unrelated, it could be the writeline that can't keep up with the stream in the console application. And at worst it's in the stream, but then I should see at least some lines in output for the correctly
formatted messages.

Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).

Hi,
I have a file where fields are wrapped with ".
=========== file sample
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
"asdsa","asdsadasdas","1123"
==========
I am having a .net method to remove the wrap characters and write out a file without wrap characters.
======================
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
asdsa,asdsadasdas,1123
======================
the .net code is here.
========================================
public static string RemoveCharacter(string sFileName, char cRemoveChar)
object objLock = new object();
//VirtualStream objInputStream = null;
//VirtualStream objOutStream = null;
FileStream objInputFile = null, objOutFile = null;
lock(objLock)
try
objInputFile = new FileStream(sFileName, FileMode.Open);
//objInputStream = new VirtualStream(objInputFile);
objOutFile = new FileStream(sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString(), FileMode.Create);
//objOutStream = new VirtualStream(objOutFile);
int nByteRead;
while ((nByteRead = objInputFile.ReadByte()) != -1)
if (nByteRead != (int)cRemoveChar)
objOutFile.WriteByte((byte)nByteRead);
finally
objInputFile.Close();
objOutFile.Close();
return sFileName.Substring(0, sFileName.LastIndexOf('\\')) + "\\" + Guid.NewGuid().ToString();
==================================
however when I run the bulk load utility I get the error
=======================================
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 3 (NumberOfMultipleMatches).
==========================================
the bulk insert statement is as follows
=========================================
BULK INSERT Temp
FROM '<file name>' WITH
FIELDTERMINATOR = ','
, KEEPNULLS
==========================================
Does anybody know what is happening and what needs to be done ?
PLEASE HELP
Thanks in advance
Vikram

To load that file with BULK INSERT, use this format file:
9.0
4
1 SQLCHAR 0 0 "\"" 0 "" ""
2 SQLCHAR 0 0 "\",\"" 1 col1 Latin1_General_CI_AS
3 SQLCHAR 0 0 "\",\"" 2 col2 Latin1_General_CI_AS
4 SQLCHAR 0 0 "\"\r\n" 3 col3 Latin1_General_CI_AS
Note that the format file defines four fields while the fileonly seems to have three. The format file defines an empty field before the first quote.
Or, since you already have a .NET program, use a stored procedure with table-valued parameter instead. I have an example of how to do this here:
http://www.sommarskog.se/arrays-in-sql-2008.html
Erland Sommarskog, SQL Server MVP, [email protected]

Documents remain in GenWWW status and conversion error message says success

Hi,
I have instaled UCM 11.1.1.4 and the situation is that documents remains in GenWWW status, the
conversion error message says success . In Ibr logs says everything went perfect, in UCM logs isn't recorded any error.
Anyone have a clue to solve this problem?
Update:
When runnig IdcAnalyse appears the following error:
./IdcAnalyze -filesystem
FileSystemFileStore:1.0.0.0 started.
Content Management System Server. Version 11gR1-11.1.1.4.0-idcprod1-101229T001824
Copyright (C) 1996-2011, Oracle and/or its affiliates. All rights reserved.
Analyzing filesystem...
.....................Error checking filesystem: Unable to locate extension for rendition flag 'L'.
Is this error related with the documents remain in GenWWW?
Thanks
Edited by: carlos.pereira on Jul 26, 2011 4:58 PM
Edited by: carlos.pereira on Jul 26, 2011 5:00 PM

Usually this issue is seen when the IBR's cannot keep up with the load and after a defined amount of time, the refineryjobs entries are cleared while the IBR's might still hold this content item.
If you do what Srinath proposes the refinery jobs is cleared as well as the queues on the IBR. This will not fix the issue with the documents in GenWWW, but it will make the way clear for (new) documents to be (Re-)submitted for conversion. IdcAnalyze should then be able to create a IdcCommand file with resubmit_for_conversion calls for all the documents in GenWWW state. Running this IdcCommand file should then convert all the documents that were "stuck" in GenWWW.

Problem overriding default JSF conversion error messages

Hello !
I have a problem to override default JSF conversation error message. I have an inputText which is binded to BigDecimal attribute, so when I enter a character in that field I get this error message: "- Conversion failed."
I think I need to register the message bundle in my faces config, and put the key of this error message to my properties file.. am I right ?
Can somebody help me with this ? Which key I need to put into the properties file ?
Miljan

Get [Sun's Java EE tutorial |https://www.sun.com/offers/details/JavaEETutorial.xml?cid=20090723ZA_TACO_JVEE_0004] and read the relevant section so you don't have to guess what you need to do.

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.

Hi la recruiter,
There are a few types of files that Acrobat can't convert--and PDF files with security applied is one on them. I'm happy to cancel your subscription, if you decide that it's not going to work out for you. Please confirm that you'd like me to proceed with the cancelation, and I'll take care of it right away.
Best,
Sara

Date Format Error message in German

Hello All
I am using Portal NW2004s SP12 and have mapped the UME to ABAP ECC System.
Suppose if user enters the in invalid format, the the error message is getting displayed in German language as below.
Bitte geben Sie den Wert in der Form 25/11/1987 ein
All other texts, labels, messages are in English only.
The German language error message comes only if date related error message is to be displayed.
This problem is with all the applications like Portal User Advanced Search in User Administration Role , ESS/MSS apps , etc.
I have checked the Browser's language, User's language, his country etc.
Please suggest the solution so that this message comes in English language.

Hi Vinod,
This is a resource bundle translation bug, which you can report to SAP by opening a OSS Message.
As you are on EP7 SP12, I would recommend to apply the latest patch before you report this bug to check if this is already fixed.
Regards,
Praveen Gudapati

Most simple query on Event Hub stream (json) constantly gives Data Conversion Errors

Hello all,
Been playing with ASA in December and didn't have any issues, my queries kept working and outputted the data as needed. However, since January, I created a new demo, where I now constantly get Data Conversion errors. The scenario is described
below, but I have the following questions:
Where can I get detailed information on the data conversion errors? I don't get any point now (not in the operation logs and not in the table storage of my diagnostic storage account)
What could be wrong in my scenario and could be causing these issues
The scenario I have implemented is the following:
My local devices send EventData objects, serialized through Json.Net to an Event Hub with 32 partitions.
I define my query input as Event Hub Stream and define the data as json/utf8. I give it the name TelemetryReadings
Then I write my query as SELECT * FROM TelemetryReadings
In the output, I create an output on blob with CSV/UTF8 encoding
After that, I start the job
The result is an empty blob container (no output written) and tons of data conversion errors in the monitoring graph. What should I do to get this solved?
Thanks
Sam Vanhoutte - CTO Codit - VTS-P BizTalk - Windows Azure Integration: www.integrationcloud.eu

So, apparently the issue was related to the incoming objects, I had. I was sending unsupported data types (boolean and Dictionary). I changed my code to remove these from the json and that worked out well. There was a change that got deployed
that (instead of marking the unsupported fields as null, they were throwing an exception). That's why things worked earlier.
So, it had to do with the limitation that I mentioned in my earlier comment:
https://github.com/Azure/azure-content/blob/master/articles/stream-analytics-limitations.md
Unsupported type conversions result in NULL values
Any event vales with type conversions not supported in the Data Types section of Azure Stream Analytics Query Language
Reference will result in a NULL value. In this preview release no error logging is in place for these conversion exceptions.
I am creating a blog post on this one
Sam Vanhoutte - CTO Codit - VTS-P BizTalk - Windows Azure Integration: www.integrationcloud.eu

Data conversion error

Hi All,
I am getting below error in my SQL server agent job.
Source: Data Flow Task Data Conversion [31] Description: Data conversion failed while converting column "Partner" (935) to column "Copy of Partner" (940). The conversion returned status value 4 and status text "Text
was truncated or one or more characters had no match in the target code page.". End Error Error: 2013-09-25 15:16:31.32 Code: 0xC020902A Source: Data Flow Task Data Conversion [31] Description: The
"output column "Copy of Partner" (940)" failed because truncation occurred, and the truncation row disposition on "output column "Copy of Partner" (940)" specifies failure on truncation. A truncation error occurred on
the specified object of the specified component. End Error Error: 2013-09-25 15:16:31.33 Code: 0xC0047022 Source: Data Flow Task SSIS.Pipeline Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The
ProcessInput method on component "Data Conversion" (31) failed with error code 0xC020902A while processing input "Data Conversion Input" (32). The identified component returned an error from the ProcessInput method. The error is specific
to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error Error: 2013-09-25 15:16:31.35 Code:
0xC02020C4 Source: Data Flow Task Excel Source [1] Description: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020. End Error Error: 2013-09-25 15:16:31.36 Code: 0xC0047038
Source: Data Flow Task SSIS.Pipeline Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Excel Source" (1) returned error code 0xC02020C4. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 3:10:23 PM Finished: 3:16:38 PM Elapsed: 374.184 seconds. The package execution failed. The step failed.
Kindly help me to debug this

Possible cause of error: Source has more characters than what is allowed by the conversion.
i.e. Conversion allows DT_STR(50) (50 characters) but a source record has more than 50 characters for that column.
Possible solution: increase the conversion character limit if possible. Or, under Error Outputs > Truncation > switch from Fail Component to Redirect Row or Ignore failure (you will then have to decide what you wish to do for such issue). Or, make
sure the source can not violate this character limit.

No data found error message in bi report

Hi All,
I have a RTF template in that i need to generate a blank page and display a message as "NO DATA FOUND" when query is not returning any rows, i tried using as below :
IF_NO_DATA
******* NO DATA FOUND *******
END_IF_NO_DATA
Under no data i wrote like below :
<?if:count(G_LATE=0?> but still i am not able to get the error message in my page.please help me on this
Thanks

>
Total Posts: 153
Total Questions: 72 (58 unresolved)
>
no one can't help you?
>
IF_NO_DATA
******* NO DATA FOUND *******
END_IF_NO_DATA
Under no data i wrote like below :
<?if:count(G_LATE=0?> but still i am not able to get the error message in my page.please help me on this
>
did you see No Data Found ?
your logic can be
<?if:count(G_LATE=0)?>
******* NO DATA FOUND *******
<?end if?>

How to avoid 'duplicate data record' error message when loading master data

Dear Experts
We have a custom extractor on table CSKS called ZCOSTCENTER_ATTR. The settings of this datasource are the same as the settings of 0COSTCENTER_ATTR. The problem is that when loading to BW it seems that validity (DATEFROM and DATETO) is not taken into account. If there is a cost center with several entries having different validity, I get this duplicate data record error. There is no error when loading 0COSTCENTER_ATTR.
Enhancing 0COSTCENTER_ATTR to have one datasource instead of two is not an option.
I know that you can set ignore duplicates in the infopackage, but that is not a nice solution. 0COSTCENTER_ATTR can run without this!
Is there a trick you know to tell the system that the date fields are also part of the key??
Thank you for your help
Peter

Alessandro - ZCOSTCENTER_ATTR is loading 0COSTCENTER, just like 0COSTCENTER_ATTR.
Siggi - I don't have the error message described in the note.
"There are duplicates of the data record 2 & with the key 'NO010000122077 &' for characteristic 0COSTCENTER &."
In PSA the records are marked red with the same message (MSG no 191).
As you see the key does not contain the date when the record is valid. How do I add it? How is it working for 0COSTCENTER_ATTR with the same records? Is it done on the R/3 or on the BW side?
Thanks
Peter

Microsoft Exchange and Outlook "requesting data.. error message.

I have a customer experiencing problems with their Microsoft Exchange and Outlook clients running across a newly installed ATM WAN. I have a 3 MB IMA circuit at the host as well as the remote. On a frequest basis the clients will get the requesting data from Exchange server error message. Any suggestions on what might be causing this problem?

Exchange server was original designed as a LAN application, thus the RPC protocol. Since you are running across a slow WAN (latency is not LAN like) you can only adjust/eliminate the message via the Registry, or better yet a Group Policy;
http://support.microsoft.com/default.aspx?scid=kb;en-us;293650
The messages become more prevalent with large number of users, slow hardware, and with Outlook 2003. The move to RPC over HTTP (2003 Exchange and Outlook 2003) might reduce chatter.

Dynamic data in error message-Urgent

Hi All,
Can amyone help me out with the API or syntax to be used if the error message has some dynamic input.
e.g. if the error message has to be :
u201CMA of type " + ma_type + "cannot be created from Rfx you are trying to create. No such master data maintainedu201D
Where ma_type is dynamic / parameter.
If we create a Error message as LR (exception), in that case how to pass this parameter?
The syntax I use is :
Doc.createApplicationException(null, u201Crfx¬.masterdata.erroru201D);
But could not figure out how to pass the parameter. Your help will be appreciated.
Thanks,
Srikanth Emani

Hi Srikanth,
You could use the setMessageModifiers on the ApplicationException class for this. This method takes an object array as the input parameter which is basically the array of values you want displayed as part of your error message on the UI.
In your localized resource, you could define your parameter as shown in the example below.
Master Agreement ID with Expiration Date u2026..
During runtime, the , , etc. in the localized resource will be replaced with the values passed to the object array.
Hope this helps.
Vikram

LVS show's no data and error message 1010

I have installel LVS at 3 customers with the instruction.
After now 2 day I have at 2 customers in all reports "no data".
At 1 customer the LVS viewer has a error message: "Error #1010"
LVS service ist started, AddOn is installed and Starttyp "Obligatorisch".
Edited by: Martin Essig on Apr 14, 2011 10:58 AM

Hi Maria,
LVS-Database:
TempAllEventsInfo and tempAllSMOInfo are empty.
The only tables with data are: FormLicenseTypes and LVSConfig
LVS service is running all time. The reports are generatet every day at 22:00.
ReportClasses.xml File:
<?xml version="1.0" encoding="utf-8" ?>
- <Report>
- <Scheduled>
<reportClass name="LVSArchive.dll" path="" order="1" timeSpan="11:00:00" />
<reportClass name="LVSReportSMOInfo.dll" path="" order="2" timeSpan="11:00:00" />
<reportClass name="LVSReportSMOServerInfo.dll" path="" order="3" timeSpan="11:00:00" />
<reportClass name="LVSReportEventInfo.dll" path="" order="4" timeSpan="11:00:00" />
<reportClass name="LVSReportDayFormUsage.dll" path="" order="5" timeSpan="11:00:00" />
<reportClass name="LVSReportLicenseInfoPerMachine.dll" path="" order="6" timeSpan="11:00:00" />
<reportClass name="LVSReportLicenseInfo.dll" path="" order="7" timeSpan="11:00:00" />
<reportClass name="LVSReportCumLicenseInfo.dll" path="" order="8" timeSpan="11:00:00" />
<reportClass name="LVSReportFile.dll" path="" order="9" timeSpan="11:00:00" />
<reportClass name="LVSReportArchive.dll" path="" order="10" timeSpan="11:00:00" />
</Scheduled>
</Report>
I have an ReportsOutput here:
C:\Programme\SAP\SAP Business One LVS\Reports Output
But no ReportsOutput here:
C:\Programme\SAP\SAP Business One LVS\LV Service
Data in csv-Files:
Info,
nodata
Data in txt-Files:
LVS Reports results 19.04.2011
Summary License Requirement Report
Usage Date From Usage Date To Number of Licenses Required Required License Type
Concurrent Access Report
Database Peak Access Date/Time Total Users
Regards,
Martin.

Date conversion error

I'm trying to calculate the dif between two dates and display it on the report. I have a table that i'm pulling my date from which is Audit_log_dim.AU_time tabl, and in that table the format of the date is 1/14/2009. I am using the current date function to pull the current date, and that format is the same. I created a formula that would subtract the MAX(Audit_log_dim.AU_time) - CURRENT_DATE. This formula is giving me an error. Please see the error below. Can somebody tell me what I am doing wrong?
!http://i49.tinypic.com/22bzwz.jpg!

Vishwam wrote:
Hi user1671409,
if i understood correct , at dashboard level '@{AsOnDate}" will be returning something other than 'RRRR-MM-DD' format.
Can you please post the error message.
Regards
VishwamHi Vishwam,
please find the error im getting in the dashboard.
Error codes:OPR4ONWY U9IM8TAC OI2DL65P
*state:HY000 code:[nQS Error: 10058] A general error has occured [nQS Error: 17001]Oracle Error code:1830 message:ORA-01830 :date format picture ends before converting entire input string at OCI call OCIStmtExecute.*

Data Conversion Error Message

Similar Messages

Maybe you are looking for