Data Integration Model

Hi all
Actually, we have a pl/sql code that generate a flat file with many "Inserts ..." statements to be loaded from another Oracle database.
That flat file is send througt a link with relative bad performance, but we´re thinking to change and look a better way to do that integration.
We are thinking to use xml. (???)
Any help will be appreciated.
Thanks in advanced.
Oracle 9iR2.

Hi aesecio,
you can get a pretty good peformance using sqlloader. Visit:
http://www.orafaq.com/wiki/SQL*Loader_FAQ
You have just to write the data into a flat file and then mapping it with a control file. Instead of inserting one record by one sql*loader will insert multiple rows with one insert. That's were you will gain the perfomance.
you could also consider to use external tables. Here the link:
http://www.orafaq.com/node/848
Cheers,
David
OCP 9i
http://www.oratoolkit.ch/otn.php

Similar Messages

Reactivating integration models

Hello All,
I deactivated a big sales order integration model in my production system. While trying to reactivate the RIMODAC2 program is taking huge time(30 mins) to complete for 5 part-plant combination. I have around 100K part-plant combinations.
Is there a short cut to reactivate? If there is some alternate program to somehow reactivate the models.Any help will be greatly appreciated.
Anyone ever had such a situation? Any ideas.
Thanks and regards
Sanjeev

Hi Sanjeev,
There is no short cut but I can explain you a way.
First please confirm that only one transaction data integration model was inadvertantly deactivated.
Second - the steps I mention below should be carried out with "care" and after notifying business users suitably as you have to do this when there is mimimal activity in the system.
Broad steps:
1. Stop the CIF Queue by going into /SAPAPO/OM17
2. Activate the sales order integration model
3. There should be queues created inbound to your SCM/APO system (check in SMQ2)
4. Wait till all queues are created for the Sales Order Integration Model and make sure you see the CIF_GEN_EVENT queue (last queue which after going to SCM system returns to R/3 ERP system and marks the Integration Model as active)
5. Delete all the CIF queues for the Sales Order Integration Model except the CIF_GEN_EVENT queue.
6. Start the CIF Queue - the CIF-GEN_EVENT queue should process
7. Confirm that the Integration Model is activated in R/3
8. Run Delta Report (/SAPAPO/CCR) and resolve any differences
Disclaimer: This is not a SAP documented solution.
Hope this helps and works out for you.
Thanks,
Somnath

Activtion of PPM Integration Model does not send any data to APO

Hi all,
When I activate my PPM Integration Model, the activation finishs without any error, but no data is being tranfered to APO.
I do not get any error message to start looking for the problem.
Thanks and regards,
LHM

Hi Luiz,
"no data is being transfered to APO" Which data are you looking for?? I am assuming youa re expecting a PPM to be created in APO.
If so,
1. Do you see any PPm in /sapapo/scc03?
2. Check if the pre reqs. for creating PPM as in [Integration of Production Process Models|http://help.sap.com/saphelp_scm50/helpdata/en/8e/d4ef37e9a4ba6ee10000009b38f842/frameset.htm] are satisfied.
3. make sure to check the inbound APO queue or outbound R/3 queue depending on what you are using.
4. Also not the time of activation and check CFG1 in R/3 to see if you can get any clues.

Issue with CIF Integration model for Transaction data

Hi Gurus,
I have activated the Integration model for PO & PReqs by location wise and i assumed that transaction data is online and we need not to re activate for any new Product / location combination got created in system.
But the issue is that every time a new material got created, we need to deactivate and activate the integration model for Transaction data to get the transaction data into APO.
Is there any way to avoid the following exercise as it is taking very long time for activation.
Please guide me as it is very urgent.
Thanks for help in advance...
Thanks & Regards,
Jagadeesh

I assume 1,60,000 location products are spread around different locations.
Rather than one Integration Model it is better to have multiple Integration Models.
For example: one for each region like North America, one for Europe, one for Asia (assuming you have countries spread across the world). Or create Intgeration Model by Country.
This way you reduce the number of Products in an Integration Model.
It is very important to have manageable set of Integration Models. Let me give an example - you have some problem hence the single Material Master Integration Model is down (inactive). At that time any PP or PDS transfer will not have the Header or COmponent products transferred to APO (in effect PDS/PPM cannot be transferred). If you are creating or converting Planned Orders they will not transfer to R/3 (as Header product is not part of active intgeration model).
But if you have country spefic or region specific Integration Model - only that country is affected not all.
In fact you should have other integration model (like PDS/PPM, Procurement Relationships, Planned / Production Orders, Sales Orders, Stocks) in same manner i.e. either Country(s) specific or group of countries by region. The risk of models getting inactive or taking too much time to activate after regeneration easily outweighs management of more number of Integration Models (compared to one Global integration model per object).
Hope this gives you some direction.
Somnath

EWM CIF Integration Model master data transfer Issue

Hi Gurus,
I am not able to transfer the master data from ERP to EWM.
When I excecute the transaction CFM1 and CFM2 integration model ,the material is not getting transferred.
I am getting the below mentioned Error message.
"Location does not exist for external location 9997, type 1040, and BSG CSSCMDEV"
Please help me in resolving this issue.
Regards
Govind

Hi,
Thanks for the reply
I had created the location 9997 for the location type 1001earlier.
When I tried to delete the location and create new Location for Location type 1040.System is not allowing me to delete.Please let me know how to delete the existing Location.
Regards
Govind

Integration model for transactinoa data

Hi
what is the transaction code to reactivate integration model for the transactional data, let say example, changes in po or sales order after activating the integaration model. which transaction code we have to use reactivate. please any one help me

Hi somnath , Online Transfer of Transaction Data using BTE is activated in R/3 SPRO (should be enabled for ND-APO application)
I think above what u mentioned is cfc9 tansaction code. It is mainly meant for materila master, vendor master , customers. simply menat for master data.But for transacrtional data likoe PO's , SO will not come into picture. Right?
Please clarify me.
Online Transfer of Transaction Data using BTE is activated in R/3 SPRO (should be enabled for ND-APO application).
2) Publication settings (Distribution Definitions) maintained in APO for the locations in SPRO.
Can u tell me the path or transaction code for the above event

PPM Integration Model Activation did not send delta change data

Hi all,
I have an integration model of PPM's. I activated the PPM for the initial transfer.
When I create a new prod. version, I created a new version of the model for PPM, above the previous active one.
When I activated the new version of model, the system tried to send all data.
I supposed that the system would only send the changed data, because the previous model is active.
but the system sent all PPM's
and it takes too long.
Would you please answer why does the system react like that and what must we do?
Mehmet

Hi
In order to check what is occuring, in your ERP system look at Table CIF_PPM_CHANGED, this will tell you the Material, Plant and Prod Vers of your PPM,s. It also has a field CHANGED to tell you if any changes have taken place and a field PROCESS, which should be set to "X" if the change has passed over to APO.
Check the values in your table to see if this has been set. It should only send the delta records where there is a value in CHANGED and PROCESS=" ".
Also check to ensure that people are not changing the Bills of Material or Routings etc, as this will also resend the PPM´s.
Regards
Ian

System copy:integration models altered

Hi SCM experts,
We have APO 4.1 connected to ECC system.Recently the QAS data is refreshed with PRD data and after that all CIF integration model variants in QAS are pointing to PRD system. There are more than 100 integration model variants and changing the logical system mnaualy to QAS client is taking long time.
Is there any standrad report or t.code by means of which we can do a mass maintenance of these integration model variants ?

Hi deeparai,
You can change the name of logical system in ECC table CIF_IMOD. However, the integration models will not become active unless you generate them again (CFM1/2/3).
Hope this helps in reducing manual work.
regards,
biplab

Data Integration differences between 9.4 and 10 ATG's releases

Hi, all.
By browsing 9.4 documentation (http://docs.oracle.com/cd/E26180_01/index.html - ATG Programming Guide) I have found Appendix B: ATG Commerce Database, which lists all database tables.
By browsing same "ATG Programming Guide" on version 10, there is no such chapter describing ATG's data model.
I would like to make an integration by acessing directly ATG's tables like described in version 9.4.
The reason why version 10 documentation is no longer bringing ATG's data model is the need for doing integration tasks using startSQLRepository as the only certified method for data integration? Can I use version 9.4 documentation as a reference for accessing direclty ATG schema's tables?
Thanks

Hi, all.
By browsing 9.4 documentation (http://docs.oracle.com/cd/E26180_01/index.html - ATG Programming Guide) I have found Appendix B: ATG Commerce Database, which lists all database tables.
By browsing same "ATG Programming Guide" on version 10, there is no such chapter describing ATG's data model.
I would like to make an integration by acessing directly ATG's tables like described in version 9.4.
The reason why version 10 documentation is no longer bringing ATG's data model is the need for doing integration tasks using startSQLRepository as the only certified method for data integration? Can I use version 9.4 documentation as a reference for accessing direclty ATG schema's tables?
Thanks

Data Integration from Oracle GL to Hyperion Planning

Hi all,
Can I knw the steps for extarcting the from Oracle GL Tables to Hyperion Planning?
We have installed hyperion 9.3.1 and ODI 10.
Please let me know how will we do this process by using ODI?
Thanks

Hi User##########,
In a nutshell you need to do the following...
1. Create a Project in ODI
2. Define your Source and Target data stores in Topology
3. Import the appropriate Knowledge Modules
4. Reverse Engineer your Source and Target modules to create a model
5. Create an integration to load from your Source (Oracle GL) to your Target (Hyperion Planning -- I actually prefer to load the data directly to Essbase)
I just did this last month. When loading the data I used an Essbase load rule to ensure Essbase knew the column order.
I was also able to load data via ODI from a flat file WITHOUT a load rule but the order of the data in the file was very important. I was also not able to substitute or alter the information in the integration when this was done. So in the end I still needed to have a load rule handy.
I'd recommend reading up on the ODI documentation for this -- some of it is actually quite good. http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_6.htm Check out the "Oracle Data Integrator Adapter for Hyperion xxx" section.
-Chris
P.S. Check out John Goodwin's blog -- there's some neat stuff in there and you'll probably figure out some neat stuff on your own too.

Creating integration model

I have created an integration model using CFM1 & activated in CFM2.
now dont know how to proceed.
is there any document or link to transfer data from R/3 to APO system.
i m new to this field & trying by own.
Thanks in advance.

Best way of creating CIF integration Model
Hai,
Please go through the above thread which can help you for understanding more about the integration models creation.
You have mentioned that you have done CFM1 and CFM2. Can you please inform for which object you have done and what you would like to see in APO?
Giving more details would enable helping you better.
Regards,
Murali.J

How to load an XML schema with Data Integrator ?

Post Author: Kris Van Belle
CA Forum: Data Integration
Is someone having experience with loading data from a regular table into an XML schema ?
What are exactly the steps to undertake ? The DI user manual does not provide that much information...

Post Author: bhofmans
CA Forum: Data Integration
Hi Kris,
In the Designer.pdf there is a chapter called 'nested data' with more information, but you can also check this website with some detailed instructions and examples on how to build a nested relational data model (NRDM).
http://www.consulting-accounting.com/time/servlet/ShowPage?COMPANYID=43&ELEMENTID=161
(Thanks to Werner Daehn for putting this together).

Deleting an Integration Model.

hi Guys
if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data.
thank u
karan
Edited by: karan.sap on Feb 27, 2010 6:36 PM

Hi Karan,
1) if any kind of changes happens in master data in ECC then we transfer that data in SCM,then what happens with that planning data with which we work earlier.
As and when you activate an integration model, a new integration model gets
generated and the earlier one will get deactivated. (provided the model name,
model selection criteria are same). That means the newly changed master data
will get activated to SCM system in which the old change is obsolete.
2) And Deleting an integration model does not mean that the previously selected data in APO is also deleted.what happens of that data
Whenever a new model gets generated, the old model will be there in the system
only and that inactive models needs to be deleted at frequent intervals orelse
it will add inconsistency to the system. This will be done using CFM7 transaction
by selecting inactive models indicator. Whether the old model is deleted or not, but
system always will read and plan as per the newly activated model.
Regards
R. Senthil Mareeswaran.

Manual Reservations Integration Model

Hello All,
In our project, during Go-live we dint had manual reservation Integration Model Activated due to some business reason.
whenver a process order is created in R/3, Reservations for Components appear in R/3 and APO.
Now when the components are good Issued in R/3 during Finished Product Process Order, these dependent reservations are not deleted in APO though the stock is reduced. Upon analysis we found that by activating the Manual Reservation Integration Model , these reservation will be deleted and hence both the R/3 and APO System will be in sync.
Now the Problem is when we are trying to do this manual reservation Integration Model activation through Batch Job , activation is taking a very long time. Upon further analysis we found that for the material-Plant combinations, program tries to search records in table RESB and approximately it takes around 5 minutes for each material -plant combinations. In our integration model we have around 2400 Material-Plant Combinations. CFC3 settings for Reservations are select block size of 1000 and filter block size of 512. R/3 version is 4.7.
Table entries in RESB are close to 3.5 Million with 141 Extends.
So just wanted to check with you guys if anybody has experienced this problem before and what resolutions were put in place to addres this ? Are there any SAP Notes available ? I searched but could not found any.
also what would be the best way to go forward? Some of the options i could think are
1) Run the I.M for selected material-Plant Combinations
2) Run the I.M for generic selection Criteria ( i.e AS IS) during Weekend.
Pls share your opinions.
Regards,
Pawan.

Hello Kenneth,
As i understand from your message that if a final Issue Indicator is unchecked, then those reservations should be present in APO. However i got confused with your below statement
Therefore it is neccessary that reservations with final issue indicator set are available in APO.
I think you might be trying to tell reservations with final issue indicator unchecked ( and not SET) are available in APO.
Regarding Transaction Code MBVR, I have few queries
1) Does this T-CODE MBVR sets the deletion Indicator in Table RESB or does it delete the Reservation permanently from Table.
2) I am not able to locate Completed Items field, which will enable me to delete Reservations. Can you pls let me know the field name.
Pls note that whenever i am trying to delete reservations thorugh t-code MBVR, it gives a message " No Document exists for the Speficied data".
thanks for your assistance,
Pawan.

Staring integration model after activation throws an error

Hello Experts,
I am trying to import Sales Orders from SAP ERP to APO. The integration model is done and the master data like Products and Location are transfeered to APO.
But when I try to transfer the Sales Orders I get an error saying:
Outbound Queue Blocked.
Function/Q/SAPAPO/CIF_ECM_INBOUND
Text: Processing of change number 500000000007 cancelled
Then the dialog box gives the options to goto the: qRFC Monitor, Ignore or Cancel.
The qRFC monitor records theame error.
Kindly let me know how I can solve this and transfer theSales Orders to APO.
Thanks,
Dilip

Dear Tibor,
Thank you for you reply. I will check the authorizations.
After this error I canceled it and went ahead. Then it gave me another error saying Product <> not found.
After getting beyond this error too it gave me about 260 successful messages in the logs. But when I execute the BAPI BAPI_SLSRVAPS_GETLIST2 OR go to the table /SAPAPO/ORDKEY in APO I cant find any Orders.
Can you kindly guide me as to where I am going wrong?
Best Regards,
Dilip

Data Integration Model

Similar Messages

Maybe you are looking for