Data Issues with New Curve 8900 on ATT

Hi, I just got this Blackberry Curve 8900 yesterday for ATT, and it's my first Blackberry. Everything was working fine up until earlier today when I realized that my data wasn't working properly. The data will work with certain apps, but certain apps with also not connect. My e-mail and BB Messenger also will not connect. The only way for me to get them to work is if I connect to wifi, but other than that on my EDGE the majority won't connect.
Here is a list of apps i've compiled that shows what works with what: 
-Works with Data & WiFi- 
BB Browser
iheartradio
FML
poynt
-Won't Work with Data but will work with WiFi-
BB E-Mail
BB Messenger
BB App World 
Facebook
Twitterberry
Myspace
Google Maps
I went to Manage Connections, and Mobile Network Options and my data is set to on, and i've done muliple battery pulls to no avail. When I turn on my WiFi all my emails and alerts that I missed come rushing in. For example I resent a Service Book to my device and I did not receive that until my WiFi was turned on. My "EDGE" is in capital letters so i'm receiving data.
Can someone please help me solve this frustrating topic? It really is mind boggling.
Thanks!
Stephen B. 

You have a BlackBerry Data plan right? I'm assuming so since it works sometimes
Also if you notice when the Wi-Fi is off, if you go into Manage Connections | Service Status does the BlackBerry Internet Service say it's connected to the Mobile Network? Or if you go into Mobile Network Options can you run a Diagnostics Test and see if it sees that your data is connected?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

  • When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)

    When I open a new tab, an unwanted website opens instead of my desired home page. THIS IS ONLY AN ISSUE WITH NEW TABS; (opening the web browser AND clicking on the home button frings me to my desired home page.)
    I have attached the url of the unwanted site.

    Use this add-on [https://addons.mozilla.org/en-US/firefox/addon/custom-new-tab/ '''Custom new tab'''].

  • How can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    how can i get my ps 3.0 to install on my laptop ? compatibility issues with newer version of windows

    It's hopelessly outdated. It's simply not compatible.
    Mylenium

  • Issues with my Curve 9330

    Let me start by saying I have been searching for an answer to my questions for a while both here and other places and I haven't found much. I am new to the world of Blackberry so forgive me if I screw something up here.
    The first problem that I am having is with email. I have a gmail account and my emails used to delete off the phone when I deleted them from the computer at gmail.com. Now they stay forever and I have to delete them off the phone too. I don't know what happened to cause the issue. I did upgrade to the new OS6 but was having some issues with that too and reverted back to OS5. I did have the email issue with OS6 also but not before I upgraded. The other issue I was having with OS6 was the cursor would just move itself without any input from me. It would always move down and to the right. I did like OS6 for the most part but couldn't deal with the cursor issue and email issue. I thought when I reverted back to OS5 that the email issue would be fixed but it was not. I have tried deleting the account and adding it back and that dont work. I have tried to download the gmail plugin again and I can't download it I get an error. I just don't know what to do with this to fix it. Any help is appreciated.
    Device info
    Your carrier: Sprint
    Model info and OS version (Go to Settings, then Options, then about):9330 v5.0.0.1030
    Add above to you profile if you dont want to type it in all the time.
    Apps and free space
    File free before and after a battery remove/replace. (Go to Settings, then Options, then status): 325093540bytes
    Did a battery pull fix your issue? no
    Apps installed and their version if possible.   (Go to Settings, then Options, then applications):google sync, lookout security, poynt, visible vote, youmail
    BT device model/version (you will have to look at the BT device): don't have one

    Hi neechie1992,
    Welcome to the Support Community!
    Please try connecting your BlackBerry® Curve™ 9330 smartphone to a computer without the battery inserted and trying to reload the BlackBerry® Device Software. Once the software load has already started, reinsert the battery. For further instructions, please see:  How to force the detection of the BlackBerry smartphone using Application Loader. www.blackberry.com/btsc/KB10144
    This process will remove all data from your BlackBerry Curve smartphone. Since it is not detected by your computer, you will not be able to backup your data first, but if you have a previously taken backup file, you can restore your data from that backup.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Address Book and Sync Issues with Verizon Curve

    I got my first BB about a month ago and like it, for the most part.  I have three major issues with it now:
    1.  SYNC   I've downloaded and installed the latest software from pocket mac and my first sync went fine (I have a MacBook Pro running 10.4.11).  Every sync after that has failed.  I've tried the recommended solutions like cleaning out the sync history, re-installing, etc.  I've un-installed and re-installed several times with no change.  The sync begins fine and but never finishes.  One thing that could be a problem is the version - every time I download the software, I've clicked on the newest version, (PocketMacForBlackBerry4.1.25.dmg) but after it installs, it calls itself Version 1.2 (1.4).  Shouldn't it be 4.1?  I know there are issues with older versions, but I can't seem to get 4.1 installed.  
    2.  ADDRESS BOOK    Sinse my first and only sync, I've needed to add a LOT of contacts into my address book manually.  It doesn't work most of the time.  When I add a new contact and save, it won't exit the contact, but pops up this note:  "Address updated externally, changes will be lost and the viewer closed."  The same thing happens if I'm trying to create a new entry or edit an existing entry.  The real crazy part is that many of the numbers I've added show up when they are incoming calls - the name and correct phone number, but when I try to call out on my phone, the contact info will not show.  
    3.  GPS    Not a major deal, but none of the GPS services work.  I use the Google Maps mobile app, but the GPS does not work.  Neither does any of the other software I have installed for GPS.  I have gone into the preferences and enabled the GPS and saved the changes.  The logo even appears on the main screen, it just doesn't work.  *NOTE* I've found that Verizon has disabled the GPS unless you pay for the VZ Navigator service.  Typical Verizon marketing.  Is there any way to bypass Verizon's block?
    Needless to say, I'm not very impressed with Pocket Mac software of the RIM address book utility.  I've read over many of the posts in this forum and see many other frustrated users.  Makes me really think about throwing my money at an iPhone. 
    If anyone has any solutions to my problems/frustrations, I would be VERY grateful.
    thanks for your time,
    -marlowe
    Message Edited by marlowe on 11-19-2008 12:12 PM

    I cannot say I AGREE! any louder.
    This pocketmac people claim in the website to offer "solutions" but they have given me lots of headaches and I too would just go and buy an iphone. The only problem is that AT&T does not work in my house.
    No matter how many tricks I have tried I cannot make my 8330 accept the changes i make in my address book. It is absolutely a killer.
    Some previous user said that bluettoth could help but at any rate that was to over ride the address book with the 8330 data and in my case i was trying to do the opposite. 
    Any help on this would be greatly appreciated!

  • Flickering Issue with RGB Curves in Adobe Premiere CC (2014) version

    I've been an Adobe Premiere user since Premiere 6.5 and have never encountered any serious issues with the software. However in this most recent Creative Cloud update I am have a flickering issue when using RGB Curves, the color correction effect I use most often. When the effect is applied, there seems to be a shift in the shadows between a "crushed" black and a "flat, or faded" black every other frame. I've been using this latest update for about a week and haven't had any other issues aside from this one.
    Unfortunately this is huge issue at the moment due to a deadline I am facing in which RGB Curves has been used as the primary color correction tool on the entire project (multiple episodes). I would simply revert to a previous version of CC but I know that the new updates are never backwards compatible. Since the project has been saved in the CC (2014) update, reverting to previous software versions would be impossible. I am currently exploring exporting the XML from the CC (2014) projects and importing it into a previous version of the software.
    Please let me know if anyone out there is experiencing any similar issues or if there are any suggestions on how to solve this issue. Thanks!

    I am experiencing flickering issues as well. However my issues are with the Fast Color Corrector and the Three Way Color Corrector. It seems as if the color correction tools are causing intermittent flickering on some people's systems.
    Additionally when I converted some old PPCC 7.2.2 projects which had the Three Way Color Corrector applied, some clips in sequences would come up as a green screen in the program monitor. If I turned the TWCC off the footage would display correctly in the program window. If I turn the TWCC back on it would display the green screen again.
    I haven't found a solution to the flickering but to solve the green screen issue I have to remove the effect, then re apply it. I guess for whatever reason, the 2014 version of PP has issues with 7.2.2 projects where the TWCC was applied.
    I'm hoping Adobe will address this soon with an update for the various bugs that have been reported.
    PPCC 2014 8.0.1
    Win 7 Pro

  • Idoc flatfile to IDOC xml issue with new PI7.11 module SAP_XI_IDOC/IDOCFlat

    Hi,
    I am trying to develop a scenario as mentioned in the blog using the new module available in PI7.1,but I am getting this error
    "Error: com.sap.conn.idoc.IDocMetaDataUnavailableException: (3) IDOC_ERROR_METADATA_UNAVAILABLE: The meta data for the IDoc type "ORDERS05" is unavailable."
    I have made every configuration correct and IDOC meta data available in both SAP R3 and PI,but it is still complaning about the meta data does not exist.
    Blog:  http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/13743%3Fpage%3Dlast%26x-order%3Ddate
    did anybody face issue with the new module available "SAP_XI_IDOC/IDOCFlatToXmlConvertor",please help me or give me mre information why I am getting this meta data error.
    Thank you,
    Sri

    Hi Sri,
    To Convert IDOC Flat file into IDOC xml from the given blog, the IDOC flat file should be present in standard format like:
    E2EDK01005                    0000047110815000000000001.........
    E2EDKA1003                    0000047110815000000000002.........
    E2EDKA1003                    0000047110815000000000003..........
    E2EDKA1003                    0000047110815000000000004........
    The Flat file have relationship as IDOC Number "000004711081500000" and segment sequence "0000001".
    If your flat file is not in this formate so i don't think that module is able to convert into IDOC xml. and if your file is already in this format then it may be issue with destinations which are created in NWA.
    Thanks
    Harish

  • ISSUE WITH NEW VERSION OF BLACKBERRY MESSENGER ON DIFFERENT BLACKBERRY PHONES

    Dear Madam / Sirs,
    I would like to seek assistance in resolving an issue with my BLACKBERRY TORCH 9810 I installed the new version of BLACKBERRY MESSENGER on my phone and it does not work on WIFI ONLY MODE.
    For example I traveled to Mexico and Panama and was on a WIFI ZONE with open access and tried to use my BLACKBERRY MESSENGER and it did not work...I tried to deleting the application and installing a previous version but was not possible. The same issue occurs on a different BLACKBERRY phone that it was working perfectly...but after updating to the new version of BLACKBERRY MESSENGER it did not work.
    Please help me resolve this issue.
    Thanks in advance
    Polk Marin
    E-mail: (personal info removed)@yahoo.com

    and what version do you have installed? I dont see this on ver 6.2.0.56
    Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
    Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
    BESAdmin's, please make a signature with your BES environment info.
    SIM Free BlackBerry Unlocking FAQ
    Follow me on Twitter @knottyrope
    Want to thank me? Buy my KnottyRope App here
    BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

  • Graphics/artifacting issues with new mid-2014 15" MacBookPro Retina

    I'm having graphics issues with my new 15" mid-2014 2.8 MacBookPro Retina.  It came with Yosemite.  I keep get glitchy
    artifacting when using Premiere Pro and After Effects (CC 2014), obviously, but then even just while using Finder when AE and PP are closed.
    I've read about it with earlier models, but nothing about the new ones.
    I turned off the Automatic Graphics Switching in Energy Saver and just updated my CUDA NVIDIA driver.  It's still a problem.  Any ideas on what to do next?
    Thanks in advance.

    Remove CUDA and see whether there's an improvement.
    To remove CUDA, triple-click anywhere in the first line below on this page to select it:
    /Library/Frameworks/CUDA.framework
    /Library/LaunchAgents/com.nvidia.CUDASoftwareUpdate.plist
    /Library/PreferencePanes/CUDA Preferences.prefPane
    /System/Library/Extensions/CUDA.kext
    /System/Library/StartupItems/CUDA
    /usr/local/cuda
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Continue with the remaining lines. Some of the items may be absent, in which case you'll get a message that the file couldn't be found. After moving all the above items to the Trash, restart the computer and empty the Trash. Don't try to empty the Trash until you have restarted.
    If you haven't already done so, back up all data before making any changes.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • Dates issue with BAPI_NETWORK_MAINTAIN

    Dear Frens,
         I have issue with dates in the activities and in the header of network while using BAPI_NETWORK_MAINTAIN. I am creating a new network with the deleted activities of an already
    existing network. The network is being created with the activity early_start_Date and finsh dates as
    sy-datum and the network header has early start dates set to sy-datum.
    While passing values to the table parameter I_ACTIVITY of the BAPI , the dates are as available in the
    existing network. But for unknown reason, The newly created network dates are with the today's date.
    Can any one please let me know the possible reason for this.
    Also every time I create a new network with multiple activities the new network is being created without first activity of the set of activities to be created.
    Here also the table parameter I_ACTIVITY has all the activities that are to be created for new network.
    I appreciate your quick response on this.
    Regards
    Priya

    Hi Lakshmi,
      I was able to solve the problem but not by the answer you gave. I had to write a WAIT up to 3 seconds after commit and that updated the table.Thanks anyways
    Regards,
    Dishant

  • Issues with BB Curve 9300

    I am writing to complain about the deterioration in functionality of my Blackberry Curve 9300 over an unacceptably short period of time. I am a UK user and our service provider is T-Mobile. I have been in possession of the phone for a year, and my issues are detailed below.
    1. The phone often freezes whilst in the middle of a task, despite not being overloaded with already open applications, requiring me to reboot the phone by removing the battery.
    2. The battery no longer lasts any longer than 8 hours, despite the fact that I am not a heavy user of applications and do not use the phone for extensive multi-tasking. I have done all that I should to preserve the life of the battery, and I find such a rapid deterioration in battery-life completely unacceptable; it no longer lasts until the evening.
    3. The rubber covering on top of the phone has completely deteriorated to the point of breaking away entirely, leaving the phone incredibly difficult to lock and unlock. I have not done anything to cause such a deterioration except use the button to lock and unlock the phone.
    4. The trackpad often scrolls up without any contact from myself, making the composition of coherent messages almost completely impossible and intensely frustrating. I have not dropped the phone or caused any scratches to the trackpad that would demonstrate that this is my fault, thus I can only assume that the trackpad is faulty.
    5. Often the keyboard will input characters that are accented or completely unrecognisable, again making message composition an incredibly frustrating task. I am not sure what has happened to the phone to cause such a keyboard malfunction, but I believe something to be faulty.
    I am very careful with my phone, I have not dropped it once in the year that I have been in possession of it and I am never careless with the phone. Given the extensive problems I have with the product, as detailed above, I can only assume that these issues similar to issues that I know other Blackberry users have suffered. I have approached T-Mobile about the problems above but was told that these issues were RIM's concern. Any help that you can provide me with in furthering this complaint would be much appreciated, as the phone is incredibly frustrating to use at this point in time.
    Many thanks.

    unpredictagirl wrote:
    I am also having issues with the phone! Since I updated my software 2 weeks ago my app world stopped working and now I cannot download it after deleting it. About a month ago when downloading mp3's it all of a sudden started having format issues even though the music is in the supported format. My photos that were taken with the camera turned to thumbnails that cannot be opened and that is why I decided to update the software in the first place. Since the new software update I now also have a java.lang.error when ever I reboot the phone. I'm frustrated! Anybody with tips as to how I can get these problems sorted please help! I have deleted all third party apps and the error persists.
    Hello,
    You should probably do a clean OS reload
    From a PC, you can install any compatible (e.g., for your exact BB Model Number) OS package to a BB via this procedure:
    http://supportforums.blackberry.com/t5/BlackBerry-​Device-Software/How-To-Reload-Your-Operating-Syste​...
    Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC. You can even use a different carriers OS package by simply inserting, between steps 1 and 2, the deletion, on your PC, of a file named VENDOR.XML. Be sure that you remove, from your PC, any other BB device OS packages as having more than one installed to the PC can cause conflicts with this procedure.
    If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
    KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Issue with new itunes version

    Dear All,
    i have a really big issue with the new itunes version. I loaded it today. Besides that every single view changed...
    So coming to my issues:
    1. my playlists changed to a status of Middle of 2011
    2. the songs which i loaded since that and are already on my hdd are only available in the icloud... means to listen to it or to put it to a playlist, means that i would have to load the songs again.... which in my case means 660 Songs.... downloading again on my hdd (means roundabout additional 9 GB of data) and last but not least paying for the 9 GB download...
    Is there any chance to link the songs in the playlist again on my hdd, i mean they are still there and i already loaded it down ?!?!?!?!?! In the past it was possible
    Hope somebody can help me... and please apple tune back.... itunes is not an easy to use interface anymore... and honestly after having 3 Ipods, 1 Pad and 2 iphones and von itv, i should think about changes... it is already the second time that Itunes completly destroys my playlists and costs me more money.....
    HELP!!!!!!
    Thax in advance
    Masta1701

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Windows Media Player plugin does not install on a fresh install of Firefox 15. This is a real issue with new students.

    I have them go to the correct site:
    plugin download page on Interoperability Bridges.
    My only options are:
    1. Have them move some files over manually; which isn't feasible with students who are technically challenged.
    2. Have them install an earlier version of Firefox. 11 is the last known good version that accepts the WMP install. The problem I am finding with this is even though I tell them not to update before installing WMP somehow they still manage to do it. A lot of times they don't know how to tell me what version of ANY browser they are using.
    Firefox is one of the few browsers that work with our LMS well, but this plug problem is a real issue.
    This only pertains to any student who has never had Firefox on their computer prior to 11.
    Thanks in advance.

    I noticed it after 11, however with 12 students students experienced problems with puzzles in Angel LMS. We had people roll back to 11.
    13 came out and that's when the trouble started. I usually stay in beta so I can get a idea of what's working. Once again I had people roll back to 11.
    I logged into a system here I had not logged into before and did a fresh install of 11 and I was able to recreate the problem myself.
    Getting people on 11 is a little harder this semester because I had to locate the 11 install and send that along with the plugin to new users. The 11 install likes to force the 15 update so they have to get the plugin installed right away. Sometimes the concept is a little much for some people.
    Edit: 12 might have been okay, since we were rolling back anyway. I don't recall any issues with WMP the few weeks students had been using it.
    Edit 2: I do remember trying to search these forums for the issue and someone posted that they had been experiencing the same problems with 12 beta (at the time it was beta) and I think it was explained as being a beta issue and it never went anywhere else.

  • Quality issues with new Mac Mini 09?

    I've been itching to hit the 'buy' button -- but in reading the many postings about the new Mac Mini, I'm seeing lots of issues with the bluetooth ... *wireless signal* ...
    Is there anyone who's not experiencing any problems?
    Sounds like it may be a hardware issue with connections... the last thing I want.
    My other choice is the 2008 Mac Pro which seems trouble free.
    What do you think?
    Thanks.

    There is a general issue/trend with the new Mini. There are plenty of reports in these forums and the news has begun to hit the wider press; I guess this is more important to a company with only 2-3% desktop share than posts to these forums. I went to the Genius Bar on Saturday and they have now lodged an official bug report with Apple. It looks like the Mini cannot pair with more than one HCI device. So if you pair with the mouse first the keyboard won't work and vice-versa. They don't think the Mini hardware is broken but that we will just have to wait for Apple to fix the firmware.
    Where I do agree is that some issues are OS-X 10.5 related and can therefore affect all Macs. The WiFi has issues where it randomly drops, it doesn't seem able to re-connect at all to channels above 13 and only manually to channels below 12. The system resume function is unreliable. All these started when we moved from 10.4 to 10.5 and so far they have not been addressed. One issue is that there does not appear to be a way for users to log bug reports, except when software crashes. However, the bluetooth issues on the Mac do appear real and are either firmware or hardware related.

  • Performance issue with new release

    Dear all,
    11.2 rac with ASM on solaris sparc standard edition.
    Client was using 10.2.0.3 on solaris 10 before and it is working fine.
    after migrating the data to the new 11g instance ,we've a performance
    degradation in the application. application forms 10.1.2.3 .Since we
    are using stanard edition, there are not much options available for
    tuning. the same application when tested with 11gr2 on windows (non-rac)
    is more faster than the current prod and the newly installed ones.
    I scheduled statspack and info from statspack
    Top 5 Timed Events                                                    Avg %Total
    ~~~~~~~~~~~~~~~~~~                                                   wait   Call
    Event                                            Waits    Time (s)   (ms)   Time
    CPU time                                                     2,468          87.0
    Streams AQ: qmn coordinator waiting for s           18         103   5742    3.6
    gc cr block busy                                   295          89    303    3.2
    control file sequential read                   235,472          70      0    2.5
    reliable message                                 8,701          24      3     .9
    Host CPU  (CPUs: 32  Cores: 4  Sockets: 1)
    ~~~~~~~~              Load Average
                          Begin     End      User  System    Idle     WIO     WCPU
                           1.20    1.37      2.43    1.25   96.32    0.00    0.91
    Instance CPU
    ~~~~~~~~~~~~                                       % Time (seconds)
                         Host: Total time (s):                441,564.6
                      Host: Busy CPU time (s):                 16,239.3
                       % of time Host is Busy:       3.7
                 Instance: Total CPU time (s):                  2,682.5
              % of Busy CPU used for Instance:      16.5
            Instance: Total Database time (s):                  3,249.6
      %DB time waiting for CPU (Resource Mgr):       0.0
    Memory Statistics                       Begin          End
    ~~~~~~~~~~~~~~~~~                ------------ ------------
                      Host Mem (MB):     16,256.0     16,256.0
                       SGA use (MB):      4,078.9      4,078.9
                       PGA use (MB):        418.6        415.2
        % Host Mem used for SGA+PGA:         27.7         27.6
              -------------------------------------------------------------Objects are indexes are the same across the environment.stats are updated, but the process is time consuming in the new environment.
    Please let me know how to proceed ?
    Kai

    Kai,
    Please take a look in the sqlnet.ora file on the client computer, you should find it in network/admin directory. In that file, do you see either of these two lines?
    sqlnet.authentication_services = (NONE)
    sqlnet.authentication_services = (NTS)The above might explain why the configuration is fast on a Windows server, but slow when a Solaris server is accessed.
    To Mark's point, execution plans can change between different versions - in fact Oracle Database 11.2.0.2 will perform something called adaptive cursor sharing, where an execution plan (you cannot check this using EXPLAIN PLAN from SQL*Plus) will potentially change as different bind variable values are supplied. However, if the application parses once and then holds the cursor open, the adaptive cursor sharing likely will not happen on future executions within that application - an unfortunate initial parse with unusual bind variable values might trigger a hard parse on 11.2.0.2 (thus possibly changing the execution plan), even when that SQL statement had been previously hard parsed. Randolf Geist recently posted an article related to this topic:
    http://oracle-randolf.blogspot.com/2011/01/adaptive-cursor-sharing.html
    Even with the Standard Edition of Oracle Database you still have a lot of options for troubleshooting this problem. In a 10046 trace file for a session look at the amount of time spent on the SQL*Net events. Do not look at just the summary provided by TKPROF, but look at the raw trace file. Is each SQL*Net related wait for a significant amount of time? If you do see long times for many of the SQL*Net waits, then you should focus your attention to the client, the server's network configuration, and the network hardware.
    On the Standard Edition you can also look at the session level time model statistics and wait events to get a better idea of what is happening in the session. For example, if you have access to a spare Windows client computer you can try a script like the one in this blog article to help you review the time model statistics and dig into the session level time model statistics and wait events for a specific session:
    http://hoopercharles.wordpress.com/2010/02/09/working-with-oracle%e2%80%99s-time-model-data-3/
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

Maybe you are looking for

  • T7900 in the US... really?

    So, I go to www.creative.com. Nothing special, just want to see some 7.1 speakers to buy, and really want the T7900 set. I click on "Speaker Systems"... again, nothing special. I click on "7.1", you know, to see the 7.1 systems available. There are t

  • Does Pages '09 embed font in PDF?

    Well, my subject says it all. Some PDF creators on Windows have the "embed fonts" option. Pages doesn't. However, I don't know if it does it by default when exporting to PDF. Thanks, Manu

  • Gets so slow that I have to pull the battery every single day!

    I have had this issue from day 1 and is driving me crazy. Have to pull out the battery every single day just to be able to free the memory and so that it can run at a descent speed. After taking out the battery, putting it back again and then switchi

  • IPhoto auto upload from Nikon D200 is insanely SLOW

    Ever since I upgraded to Yosemite, iPhoto has become terribly slow. The issue typically surfaces AFTER the pictures download and when iPhoto asks if it should delete the pictures on my camera. I say no. And then I see this "wheel of death" that keeps

  • Cannot open the photoshop editor in Elements 12, Help!!!!!

    I have signed in with my adobe ID and password.  The photoshop editor won't open.  I sign in again.  It takes me in a circle.  I keep signing in, but it won't open.  I have reset my password several times.  It still won't open.  I paid good money for