Data Load error when loading character "u00F3"

We are getting an error when trying to load a characteristic that is defined with the Conversion Routine "ALPHA". I'm looking for advice on how to load this infoobject exactly the way it looks without peforming any checks?
Example:
infoobject: IOZNAME
char 20
Conversion routine: ALPHA
value: Lórenzo

Hi,
That shouldn't be a problem. Plenty of people use ALL_CAPITAL without any problems. But you might want to revisit that when you goto unicode or are pulling over any 1 byte languages like Chinese, etc.
Cheers,
Kedar

Similar Messages

Error when transferring data; communication error when analyzing

Hi,
When I load the data from the SAP CRM source system. Iam getting the following error.
Error when transferring data; communication error when analyzing
Diagnosis
Data Packets or Info Packets are missing in BW, but there were - as far as can be seen - no processing errors in the source system. It is
therefore probable that an error arose in the data transfer.
With the analysis an attempt was made to read the ALE outbox of the source system, which lead to error .
It is possible that no connection exists to the source system.
Procedure
Check the TRFC overview in the source system.
Check the connection of the source system for errors and check the
authorizations and profiles of the remote user in both the BW and
source systems.
Check th ALE outbox of the source system for IDocs that have not been
Can anyone guide me on this.
Thanks in Advance
Varun

ok here's a development..when i logged in the source system to check the job...it says the job defn is incomplete. The description says:
Definition for job ARFC:SYSLOAD1C800CRMREMOTE is incomplete. Job cannot be released
Can anyone give an insight on it.
Any kind of input will be appreciated.
Regards
Varun

APEX bug:9879227 (ORA-01403: no data found error when using validations)

Hi,
We are getting the
ORA-01403: no data found error
when the APEX page has validations AND a tabular form is also present on the page.
I did see a couple of other forum links discussing the issue (bug id: 9879227 ?? ).
But what i want to get a confirmation on is, in which release was this bug really fixed ?
i see the release notes of 4.0.1.00.03 claiming that it is fixed
in the release.
we are on 4.0.1.00.03. is this bug really solved in release 4.0.1.00.03?
are there any known work-arounds ? i tried re-creating the report multiple times, but that did not help.
Any suggestions or work-arounds will greatly help us.
Regards,
Ramakrishnan

Ramakrishnan,
If you are talking about getting no data found when trying to save the report then take a look at the last message in this thread:
{message:id=9971445}
Cheers,
Tyson Jouglet

Data Access Error when Importing a Multi-Load Text File

I am able to upload a file that contains 12 months of data with the following tags (and one line of data as example):
EnterpriseToHFM07-09
Actual
01/31/2007
12
R,N,P
C,A,V,V,V,V,V,V,V,V,V,V,V,V
FR.PADJ_LC,BRREV,372803807,355714043,405412167,414395204,453025792,449832777,524375729,419567061,411230079,469840787,432445947,384835661
After uploading, click on Import and receive a Data Access Error. Log is below. Any input is greatly appreciated.
** Begin FDM Runtime Error Log Entry [2010-12-02 10:13:02] **
ERROR:
Code............................................. -2147217900
Description...................................... Cannot bulk load because the file "\\gsd4w023c\FDMAPPS\FDMT\Inbox\tWmpus54349283242113.tmp" could not be opened. Operating system error code 5(Access is denied.).
BULK INSERT FDMDev1..tWmpus54349283242113 FROM N'\\gsd4w023c\FDMAPPS\FDMT\Inbox\tWmpus54349283242113.tmp' WITH (FORMATFILE = N'\\gsd4w023c\FDMAPPS\FDMT\Inbox\tWmpus54349283242113.fmt',DATAFILETYPE = N'widechar',ROWS_PER_BATCH=2221,TABLOCK)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1112
Thread........................................... 8324
IDENTIFICATION:
User............................................. 12345
Computer Name.................................... GSD980
App Name......................................... FDMT
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLNCLI10
Data Server...................................... FDMDS
Database Name.................................... FDMDev1
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... EnterpriseToHFM07-09
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... Actual
Category ID...................................... 12
Period........................................... Jan - 2007
Period ID........................................ 1/31/2007
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2010-12-02 10:13:02] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error. File=fr_HypEnt_data_2007.DAT
Procedure........................................ clsMPLoader.fMultiImportText
Component........................................ upsWMPLoaderDM
Version.......................................... 1112
Thread........................................... 8324
IDENTIFICATION:
User............................................. mpus54964
Computer Name.................................... GSD400U
App Name......................................... FDMT
Client App....................................... WebClient
CONNECTION:
Provider......................................... SQLNCLI10
Data Server...................................... FDMDS
Database Name.................................... FDMDev1
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... EnterpriseToHFM07-09
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... Actual
Category ID...................................... 12
Period........................................... Jan - 2007
Period ID........................................ 1/31/2007
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... False

Yes.
Please take the time to flag this response as helpful or correct if it helps you address the issue
http://forums.oracle.com/forums/ann.jspa?annID=1184
Edited by: TonyScalese on Dec 2, 2010 11:52 AM

Getting 'No Data found' Error when clicking the edit link to edit a record.

Application Express 4.2.0
Database: oracle 11g
Hi Guys
I am getting an error whenever i try to edit some of my entries by clicking the edit link, i have a composite Primary key attributes of three columns ( Budget Year ('YYYY'), Training Name('VARCHAR') and Emp Code ('VARCHAR')
Some records will load when i click Edit but some wont and return 'ORA-01403: no data found' error.
Any help will be appriciated.
Thanx
MATT

Hi,
Please create example about problem to apex.oracle.com and share developer login details to workspace.
Regards,
Jari

Data target error when opening InfoPackage (not loadable)

Hi,
I have transported my objects from the development environment to QA environment, but now when I try to open one specific InfoPackage (in QA) to schedule a data load to an DSO, I receive the following error:
Data target 'P_USUARIO ' removed from list of loadable targets; not loadable RSM 33
Data target 'P_USUARIO ' is not active or is incorrect; no loading allowed RSM 36
I tried to run RS_TRANSTRU_ACTIVATE_ALL program before realizing that it is not relevant in NW04s and I tried to transport many times again this specific data target with no success.
Any suggestion??
Thanks in advance.
Raphael

Hi:
The program you ran is for Transfer Structure.
The error you are gettign is for an Inactive Update Rule.
If the infopackage is loading several data targets and an update rule is inactive, then, you have take off laoding to that Update Rule in Infopackage.
First, see which Update Rule is Inactive. Look in all the tabs of infopackage and you will find it.
Ram C.

Issue related with the Date Format --- error when activating the DSO

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...
Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..
is there any routine to solve this or i have to go for data selection in info package ......
I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT*
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE*
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT*
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZDUEDAT*
Value '20101402' of characteristic 0DATE is not plausible
Thanks
Baskar
Edited by: tjgnanabaskar on Aug 6, 2010 5:35 PM

Hi Friends..
plz help me to fix the issue ...im getting when activating the DSO...Actually im not getting error when loading the data thru DTP..im facing this issue while activating the DSO..is there any routine to solve this or i have to go for data selection in info package ......I have searched in the forum also..but im not able to fix..plz help
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRMPOSTDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZKITRDT
Value '01/20/20' of characteristic 0DATE is not a number with 000008 spaces
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZMNS_DATE
Value '20101502' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_EXCDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject 0CRM_PRIDAT
Value '31122009' of characteristic 0DATE is not plausible
Error when assigning SID: Action VAL_SID_CONVERT, InfoObject ZCOMPDAT
Value '31122009' of characteristic 0DATE is not plausible
Thanks
Baskar

Page process throwing No data found error when deleting tabular form item

Hi guys,
I am trying to run a page process just before the Tabular form's MRU process and it's throwing a no data found error. Here is my code:
BEGIN
     for i in 1..apex_application.g_f02.count LOOP
          IF apex_application.g_f01(i) is not null THEN
               UPDATE STOCK
                    SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
               WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
               COMMIT;
          END IF;
     END LOOP;
END;Here f01 is the checkbox column and the if-statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
When I click on a checkbox and hit delete button which fires off both this process and then MRU I get the no data found error.
Would be grateful if someone could shed some light on this. Many thanks.
Edited by: taepodong on Jul 1, 2012 7:54 AM

Hi,
>
I am trying to run a page process just before the Tabular form's MRU process and it's throwing a no data found error. Here is my code:
BEGIN
     for i in 1..apex_application.g_f02.count LOOP
          IF apex_application.g_f01(i) is not null THEN
               UPDATE STOCK
                    SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
               WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
               COMMIT;
          END IF;
     END LOOP;
END;Here f01 is the checkbox column and the if-statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.
When I click on a checkbox and hit delete button which fires off both this process and then MRU I get the no data found error.
>
You are iterating on the f02 and checking for f01 not null. That is wrong usage of the the checkbox item. Please see these links . especially the OnSubmit Process examples.
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDDCHAF
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21676/apex_app.htm#AEAPI215
Regards,
PS : This is what you need to understand
>
<b>Note that check boxes displayed using APEX_ITEM.CHECKBOX will only contain values in the APEX_APPLICATION arrays for those rows which are checked. Unlike other items (TEXT, TEXTAREA, and DATE_POPUP) which can contain an entry in the corresponding APEX_APPLICATION array for every row submitted, a check box will only have an entry in the APEX_APPLICATION array if it is selected.</b>
>
Edited by: Prabodh on Jul 2, 2012 9:44 AM

Data Access Error when importing Standard Reports

After installation, when I try to import standard reports, I got a "Data Access Error".
FDM 9.3.1
Oracle 10g
In the fdm.err, I find the following description:
ORA-12899 : too long value for "MYFDMSCHEMA"."TREPORT"."REPORTDESC" (real 152, max 75).
It seems that reports descriptions are too long for my Oracle repository...
Any idea ?
Regards

Yes.
Please take the time to flag this response as helpful or correct if it helps you address the issue
http://forums.oracle.com/forums/ann.jspa?annID=1184
Edited by: TonyScalese on Dec 2, 2010 11:52 AM

Integration Builder - runtime data cache - Error when creating cache list

All,
When I go into the Integration Builder --> Administration --> Runtime tab --> Data Cache
I get a message saying "Error when creating cache list".
All cache areas look ok and I do not see any other error.
Also, RFC INTEGRATION_DIRECTORY_HMI looks good.
Please advise.
Thanks a lot.

Hi,
Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
regards,
ganesh.

Data incompatibility error when working with objets

Hi
I am passing an object to the procedure inside package.
when i am using for loop it's working fine
the code is below
create or replace type emp_obj as
object(empno number(10),
ename varchar2(10),
sal number(10,3));
create or replace type emp_tab is table of emp_obj;
CREATE OR REPLACE PACKAGE emp_obj_pkg
AS
PROCEDURE emp_ins_proc(p_emp_tab IN emp_tab);
END emp_obj_pkg;
CREATE OR REPLACE PACKAGE BODY emp_obj_pkg
AS
PROCEDURE emp_ins_proc(p_emp_tab IN emp_tab)
IS
BEGIN
     FOR i IN 1..p_emp_tab.count
     LOOP
INSERT INTO emp VALUES( p_emp_tab(i).empno,p_emp_tab(i).ename,p_emp_tab(i).sal);
     END LOOP;
END emp_ins_proc;
END emp_obj_pkg;
declare
v_emp_tab emp_tab;
begin
select emp_obj(empno,ename,sal) bulk collect into v_emp_tab from emp;
emp_obj_pkg.emp_ins_proc(v_emp_tab);
end;
when i am trying to use the forall in the package it throwing the error data incompatibility error
the procedure code for the package is
CREATE OR REPLACE PACKAGE BODY emp_obj_pkg
AS
PROCEDURE emp_ins_proc(p_emp_tab IN emp_tab)
IS
BEGIN
     FORALL i IN 1..p_emp_tab.count
INSERT INTO emp VALUES p_emp_tab(i);
END emp_ins_proc;
END emp_obj_pkg;
i got below errors
ERROR
PL/SQL: SQL Statement ignored
PL/SQL: ORA-00932: inconsistent datatypes: expected - got -
pls help me how to do this with for all
Thanks & Regards
Bala Sake

954925 wrote:
when i am trying to use the forall in the package it throwing the error data incompatibility errorThe structure following the VALUE clause need to match the structure of the table being inserted into.
Basic examples of using record structures for inserting data, for object and normal tables.
SQL> create or replace type TEmployee is object(
2          emp_id number,
3          emp_name varchar2(10),
4          dept_id number
5 );
6 /
Type created.
SQL>
SQL> create or replace type TEmployeeTable is table of TEmployee;
2 /
Type created.
SQL>
SQL> create table employees of TEmployee(
2          constraint pk_employees primary key( emp_id )
3 ) organization index;
Table created.
SQL>
SQL> create or replace procedure EmpInsert( empTable TEmployeeTable ) is
2 begin
3          forall i in 1..empTable.Count
4                  insert into employees values empTable(i);
5 end;
6 /
Procedure created.
SQL>
SQL> declare
2          empArray        TEmployeeTable;
3 begin
4          select
5                  TEmployee( empno, ename, deptno )
6          bulk collect into
7                  empArray
8          from    emp;
9
10          EmpInsert( empArray );
11 end;
12 /
PL/SQL procedure successfully completed.
SQL> create table employees(
2          emp_id number primary key,
3          emp_name varchar2(10),
4          dept_id number
5 ) organization index;
Table created.
SQL>
SQL> declare
2          cursor c is select empno, ename, deptno from emp;
3          type TCursorBuffer is table of c%RowType;
4          buffer TCursorBuffer;
5 begin
6          open c;
7          loop
8                  fetch c bulk collect into buffer limit 100;
9
10                  forall i in 1..buffer.Count
11                          insert into employees values buffer(i);
12
13                  exit when c%NotFound;
14          end loop;
15          close c;
16 end;
17 /
PL/SQL procedure successfully completed.
SQL> Of course, these example do not show how one should code when moving data from one table to another (using native SQL only is by far faster and more scalable).
However it does show the basics of inserting a structure via the INSERT call in PL/SQL (as oppose to individual variables) - and this is an important consideration as the resulting code is more robust and requires less keystrokes.

Pasting Data Failed error when linking Excel table

I get an error "data paste failed" when trying to link an Excel table to PowerPivot. I just installed Office 2010 and Powerpivot. Below is a dump from the error box.
============================
Error Message:
============================
The object does not exist or read permissions are needed.
Pasting data failed.
============================
Call Stack:
============================
   at Microsoft.AnalysisServices.Server.Refresh(IMajorObject obj, ObjectExpansion expansion)
   at Microsoft.AnalysisServices.Server.SendRefresh(IMajorObject obj, ObjectExpansion expansion)
   at Microsoft.AnalysisServices.MajorObject.Refresh(Boolean full)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.TryChangeColumnDataTypes(PushedDataInfo pushedDataInfo, PushedDataSource pushedDataSource)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.CreateLinkedTableInternal(CreateTableParameters parameters)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.CreateLinkedTableInternal(CreateTableParameters parameters)
   at Microsoft.AnalysisServices.Modeler.Storage.PushedDataTable.CreateLinkedTable(String tableName, IExcelTableDataReader excelTableReader)
   at Microsoft.AnalysisServices.Modeler.Storage.DataModelingSandbox.CreateLinkedTable(String tableName, IExcelTableDataReader excelTableReader)
   at Microsoft.AnalysisServices.Modeler.ClientWindow.CreateLinkedTable()

Euge,
Is this still an issue?
Thank you!
Ed Price, SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Data network errors when manually switching from 3g to 2g

Hi everyone,
Apologies if this has been posted before but im running out of ideas! - Got my iphone 4 a couple of weeks ago and have noticed a rather irritating problem with it. For some reason, if i manually switch from 3g to 2g the data connection drops.. I get 'cannot activate cellular data network' errors and i have to toggle airplane mode on/off to reset the connection. Is this a network issue? - I live in London and am with Vodafone... Their tech support are useless as all they suggest is resetting the phone or getting it replaced. Its my third handset in 2 weeks and im getting close to calling it a day and sending the phone back to Apple. Anyone out there in a similar situation? - Advice??

Bump
So no-one has suffered this issue? - Not even fellow vodafone uk users?

GTX's receive data is error when the fpga logic resource is 70% used

Hi
My environment is : GTX core: 2.2 ISE: 14.6 FPGA: k732t-2
My GTX ip setting: no 8b10b encoding , no data scrambing ; line rate: 2.5G,
I use the example design code ,just change the data transmitted and the start of the frame.
My data file is attached.
Now I have a problem: when I just used the example design , the recv data is correct.
but when I add other modules to deal with the recv data, the recv data from GTX is wrong. And the wrong data is
AAAA , it is changed to AAEA or other data pattern.
When the line rate is decreased (eg. 1.25G) the recv data is correct though the other modules is attached.
Could anyone help me give some advise ? which causes the phenomenon?

I have already simulated it. The simulation is correct.
And when I download the same bit file , sometimes it worked correct , but sometimes it didn't

Default data adaptor error when deploying a war file in weblogic

Hi All,
Newbie here with a few questions regarding the deployment of OPA 10.1. Really hoping you guys can help...
1) I'm attempting to deploy an unexploded web-determinations.war file on WebLogic. Thanks to this forum I've got past the issues of "rulebase directory not found" etc. However, i'm now faced with an issue which I can't find any info on. Please see below.
3672074 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN com.or
acle.determinations.web.platform.controller.actions.StartSessionAction - Could not instansate defau
lt data adaptor
java.lang.NullPointerException
at java.io.File.<init>(File.java:194)
at com.oracle.determinations.web.platform.plugins.data.XDSDataAdaptor.<init>(XDSDataAdaptor.
java:55)
at com.oracle.determinations.web.platform.controller.actions.StartSessionAction.createInterv
iewSession(StartSessionAction.java:173)
at com.oracle.determinations.web.platform.controller.actions.StartSessionAction.getResource(
StartSessionAction.java:66)
at com.oracle.determinations.web.platform.servlet.WebDeterminationsServlet.doGet(WebDetermin
ationsServlet.java:67)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.
java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.oracle.determinations.web.platform.util.CharsetFilter.doFilter(CharsetFilter.java:46)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletC
ontext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2
140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
I've got the following entry in the application.properties file too...
# Default XDS data adaptor file path
#xds.file.path =data
From what we can see we believe the code is getting a null pointer because of the following method in the WebDeterminationsServletContext class.
public String resolveFullPath(String path)
File f = new File(path);
return f.isAbsolute() ? f.getAbsolutePath() : this.servletContext.getRealPath(path);
We believe the getRealPath(path), highlighted in red, is returning null. Any ideas how we can resolve this?
2) The second issue I'm facing is with regards the plugins.libraries property in the application.properties file. I've got the entry as
plugin.libraries =DataAdaptor.DA;
which should point to our customised data adaptor. However I'm getting the following error.
4242994 [[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN com.or
acle.determinations.web.platform.servlet.WebDeterminationsServletContext - Can not find class: Data
Adaptor.DA
4243025 [[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'] WARN com.or
acle.determinations.interview.engine.local.LocalInterviewEngine - Can not find class: DataAdaptor.D
A
3) Also, does anyone know if it's possible to deploy a web-determinations.war file containing additional internal application code? What we're attempting to do is deliver a single war file which not only holds the web determination code but also all the code for an application which wraps the OWD within it. At present this just isn't working. I'm not sure what the conflict is exactly. The only way i seem to be able to get this working is by deploying the code in two seperate war files.
Any help on these issues would be greaty appreciated.
Thanks,
Taj

(2) is being caused because your data adaptor plugin is not installed properly. The jar that contains your plugin needs to go in the WEB-INF/lib directory and you must specify the fully qualified class name in the plugin.libraries property of the application.properties file.
If you haven't provided a custom data adaptor, Web Determinations will configure and attach the default one for use instead, which is file based. If you are deploying to WebLogic as an unxeploded war, you must configure the directory the default data directory the plugin will uses by specifying an absolute path that your instance of Web Determinations has read/write permissions to in the xds.file.path property of the application.properties file. In your case (1) is basically being caused by (2) since if the your data adaptor was loaded correctly the default one wouldn't load at all.
As for (3) yes it's likely possible, provided you don't have library conflicts. How it's done really depends on what these additional customisations consist of.

Data Load error when loading character "u00F3"

Similar Messages

Maybe you are looking for