Data load from SAP ECC to SAP BI

Hello Gurus and Experts
                 I am new to BI and I m almost struggling to find a step by step process in loading data from SAP ECC to SAP BI through generic extractors from VBAK. The Problem is I can create an Infopackage for full update and loaded the records.(Lets say Upto this step 100 records are moved to PSA)
Then I create a sale order in ECC which is a new record that has to be transfered as delta record.
Now my questions are:
Am I correct if I moved the initial records into PSA with Full Mode InfoPackage?
Should I create another infopackage for delta records with Delta Mode or to change the update mode of the infopackage created earlier for Full Update mode?
Should I create a new infopackage every time to load the delta records?
Does separate DTP has to be created for Full and Delta updates?
Please dont be frustrated if my questions are pointless or childish
I would be glad if someone demonstrate the solutions in steps
Thanks in Advance
Karthik

Hi Ram,
       I have followed all the steps mentioned by you, yet something is lagging in my end.
Let me lists the steps done by me and please correct me if i am wrong anywhere.
1. RSO2 in ECC..
2. Created DS with short, med and long names in SD application component for VBAK with all the fields unchecked in hide selection except document number, time of document, document date, net
value of the document and document currency.
3. mentioned a numeric pointer as Document number for delta and used new status for changed records.
3. saved the datasource. checked the newly created ds using the tcode RSA3.
4. Replicated the datasource under SD Application Component in BI and Activated it
6. Performed Transformations
7.  created an Info Package with FULL UPDATE and executed. I got 6898 records in my PSA
6. Created DTP with DELTA. Saved and Executed it. Got 6898 records in my DSO
7. Created Info Package with INIT WITHOUT DATA TRANSFER and scheduled it.
8. Switched over to ECC and added a sale order
9. Created an InfoPackage with DELTA UPDATE and Scheduled it.
-----I didnt receive any records in my PSA
10. performed DTP.
---- I didnt received any new records in my DSO as my delta run is not working..
PS: I am using WO DSO
Please correct me if i am wrong anywhere
Thanks in advance
Karthik

Similar Messages

  • Hiearchy data loading from flat file to sap bw

    Hi experts,
    I am new to this can plz help me in sloving this sceniro.
    I have a sceniro like this can u tell me the procedure and hiearchy flat file structure
    To develop a data model in SAP BW to analyze sales
    MASTER DATA STRONG ENTITIES
    Create characteristics for following strong master data entities
    Customer
    Outlet
    Sales Office
    Sales Region
    Sales Representative
    Material
    Use Calendar Day and Calendar Month as time characteristics
    MASTER DATA WEEK ENTITIES
    Create attributes for following week master data entities
    Customer Name
    Customer Location
    Material Name
    Material Group
    ADDITIONAL MASTER DATA (HIEARCHIEY)
    Create a hierarchy where sales offices are assigned to sales regions
    and sales representatives are assigned to sales offices
    KEYFIGURES
    Quantity
    Price
    Tax %
    Sales Revenue
    DATA LOADING STARTEGY
    Load all master and transaction data using flat files.
    Thankq in advance
    Edited by: subbaraju on Dec 23, 2009 6:42 PM

    Hi arun
    Can u send me in detail the procedure how to slove the above sceniro.
    That is how many flat files we need to create. (cust f.f, mat f.f, heri f.f, trx f.f) i dont know wheather  it right r not.
    For tax and sales revenue wht are the formula we need to submit.
    and which one we need to take as master data key for hiearchery.
    Thanks in advance
    Edited by: subbaraju on Dec 24, 2009 7:05 PM

  • Extraction from SAP ECC to SAP BI

    What are the steps for Extraction from SAP ECC to SAP BI? Thanks.

    Hi,
    we have two types of extractions 1) Application specific 2)cross application
    under applicatin specific -->we have customer genenrated and business content extractions
    under customer generated means LIS, CO-PA, FI-SL(i.e no ready made data source in business content so we have to generate datasource)
    Business content means there is ready made business content datasource so we can use it
    LIS,LO --> when ever we go for extracting logistics informatin
    LO steps
    http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
    LO Cockpit (Use transaction LBWE)
    /people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
    https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/21406 [original link is broken] [original link is broken]
    /people/sap.user72/blog/2005/09/05/sap-bw-and-business-content-datasources-in-pursuit-of-the-origins
    To understand LO extraction go through these weblogs by Roberto
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
    under cross Applicaion
    Generic extraction-->table, view, infoset query, function module
    Generic extractors are of 3 types:
    1. Based on table/view
    2. Based on Infoset Query
    3. Based on Function module
    GenericSteps
    Log on sap R/3.
    Step 1. create a table or view for generic extraction in se11.
    Step 2. Goto  t-code RSO2
    Step 3. Here u have to decide whether to extract transaction data or master data attributes or texts.
    Step 4. suppose if u have opted for transaction data,then give name in the column ex:ztd_m(data source name)
    Step 5. select create button,this will take u to another screen.
    Step 6. Here u have to decide from which application component u r extacting data.Ex: SD,MM,..
    Step 7. in this screen u have to fill short disciption,medium,long( these r mandatory).
    Step 8. then U have to Table name or view name which u have created in se11.
    Step 9. I f u want to maintain generic delta then u can select generic delta in top left hand side corner.
    Step 10. in next screen u have to give some field which is primary key.
    step 11. here u to specify whether time stamp or cal day or numeric pointer depending on u r requirement.
    step 12. then u have to specify  whether new status for changed records or additive delta.
            If u choose additive delta ,then u have to load data to infocube or ods object.
            If u choose new status for changed records, then u to load data  to ods object only.
    Step 13. then save it.
    Step 14. then logon to sap bw ,then replicate the data source then as usuall.
    COPA
    CO-PA--> for financial info
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/COPA/COPA.pdf
    You can browse forum for more detailed info..
    Regards,
    B

  • "An IdocException occurred" while posting Idocs from SAP ECC to SAP PI AEX

    Hi all,
    While sending Idocs from SAP ECC to SAP PI 7.4 AEX, we are experiencing this issue at SAP ECC-SM58
    Only a particular Idoc type is having this issue.
    Below are the checks done before posting this query:
    1. Pushed other Idocs from the SAP ECC to PI and all were getting exchanged successfully.
    2. Reloaded the meta data in PI for  the particular Idoc type in issue.
    3. Checked the RFC destinations in SAP ECC, RFC connection test is also working fine.
    4. Unicode option enabled in the SAP ECC RFC destination pointing to PI-AEX
    5. Restarted the inboundRA service in PI AEX.
    Is there anything still missing. What could be root cause of this issue.
    If anyone has encountered it before, pleases share the resolution.
    Thank you
    Younus

    Hi Amit,
    Thanks for the reply. Log viewer doesn't provide much help on the error.
    The error desc says
    "JRA]serverExceptionOccurred. Server XI_IDOC_DEFAULT_SID, Managed_Application_Thread_58, connectionId=5-ip address|sapgw20|XI_IDOC_DEFAULT_SID, Exception: com.sap.conn.jco.JCoException: (104) JCO_ERROR_SYSTEM_FAILURE: An IDocException occurred"
    regards,
    Younus

  • Data Extraction from MS-BI to SAP-BI

    Hi All,
    We have a requirement for data extraction from MS-BI to SAP-BI. In MS-BI cube they have same fact table and dimension table. This fact table is linked with dimension key. I want to know how to extract the data from the MS-BI cube to SAP-BI.
    Can we go with DB connect or Info spoke. Which will be the best option?? Let me know the steps also.
    And also how to find out the dimension table in SAP-BI cube??
    Pls let me know.
    Regards
    Sathiya

    Hi,
    a few years ago I used the DB-connect to extract data from siebel. Nowadays I think you can easily use UD-connect.
    regards
    Siggi

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • Error is data loading from 3rd party source system with DBCONNECT

    Hi,
    We have just finished an upgrade of SAP BW 3.10 to SAP NW 7.0 EHP1.
    After the upgrade, we are facing a problem with data loads from a third party Oracle source system using DBConnect.
    The connection is working OK and we can see the tables in the source system. But we cannot load the data.
    The error in the monitor is as follows:
    'Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.'
    But, unfortunately, the error message has no further information.
    If we look at the job log in sm37, the job finished with the following log -                                                                               
    27.10.2009 12:14:19 Job started                                                                                00           516          S 
    27.10.2009 12:14:19 Step 001 started (program RSBATCH1, variant &0000000000119, user ID RXSAHA)                    00           550          S 
    27.10.2009 12:14:23 Start InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG                                              RSM1          797          S 
    27.10.2009 12:14:24 Element NOAUTHORITYCHECK is not available in the container                                     OL           356          S 
    27.10.2009 12:14:24 InfoPackage ZPAK_4FMNJ2ZHNNXC6HT3A2TYAAFXG created request REQU_4FMXSQ6TLSK5CYLXPBOGKF31G     RSM1          796          S 
    27.10.2009 12:14:24 Job finished                                                                                00           517          S 
    In a BW 3.10 system, there is no  message related to element NOAUTHORITYCHECK. So, I am wondering if this is something new in NW 7.0.
    Thanks in advance,
    Rajib

    There will be three things to get the errors like this
    1.RFC CONNECTION FAILED
    2.CHECK THE SOURCE SYSTEM
    3.CHECK IT OUT WITH Oracle Consultants WEATHER THEY ARE FILLING UP THE LOADS.TELL THEM TO STOP
    4.CHECK I DOC PROCESSING
    5.FINALLY MEMORY ISSUES.
    6.CATCH THE DATA SOURCE FIRST CHANGE IT AND THEN ACTIVATE AND RUN THE LOAD
    7.LAST IS MEMORY ISSUE.
    and also Check the RFC connection in SM59 If  it is ok then
    check the SAP note : 692195 for authorization
    Santosh

  • How we can automate the data loading from BI-BPC

    Dear  Guru's
    Thanks for watching this thread,my question is
                  How we can load the data from BI7.0 to BPC.My environment is SAP-BI 7.0 and BPC is 7.5 MS version and 2008SQL.
    How we can automate the data loading from  BI- BPC Ms version.Is manual flat file load is mandatory in ms version.
    Thanks in Advance,
    Srinivasan.

    Here are some options
    1) Use standars packages and schedule them :
        A) Openhub masterdata file into a flat file/ BPC App server  and Schedule the package - Import Master Data from a Data File and  other relevent packages.
    2 ) Using Custom Tasks in Custom Packages ( SSIS)
    Procedure
    From the Microsoft SQL Server Business Intelligence Developer Studio, open the Microsoft SSIS folder.
    Create a new package, or select an existing package to modify.
    Choose  Task  Register Custom Task .
    In the Task Location field, browse for the target .dll file.
    Note
    By default, the .dll files are stored in BPC/Websrvr/bin.
    End of the note.
    Enter a task description, select an appropriate icon, then click OK.
    Drag the icon to the designer window. Enter data as required.
    Save the package.

  • Data loading from flat file to cube using bw3.5

    Hi Experts,
                       Kindly give  me the detailed steps with screens  about Data loading from flat file to cube using bw3.5
           ...............Please

    Hi ,
    Procedure
    You are in the Data Warehousing Workbench in the DataSource tree.
           1.      Select the application components in which you want to create the DataSource and choose Create DataSource.
           2.      On the next screen, enter a technical name for the DataSource, select the type of DataSource and choose Copy.
    The DataSource maintenance screen appears.
           3.      Go to the General tab page.
                                a.      Enter descriptions for the DataSource (short, medium, long).
                                b.      As required, specify whether the DataSource builds an initial non-cumulative and can return duplicate data records within a request.
                                c.      Specify whether you want to generate the PSA for the DataSource in the character format. If the PSA is not typed it is not generated in a typed structure but is generated with character-like fields of type CHAR only.
    Use this option if conversion during loading causes problems, for example, because there is no appropriate conversion routine, or if the source cannot guarantee that data is loaded with the correct data type.
    In this case, after you have activated the DataSource you can load data into the PSA and correct it there.
           4.      Go to the Extraction tab page.
                                a.      Define the delta process for the DataSource.
                                b.      Specify whether you want the DataSource to support direct access to data.
                                c.      Real-time data acquisition is not supported for data transfer from files.
                                d.      Select the adapter for the data transfer. You can load text files or binary files from your local work station or from the application server.
    Text-type files only contain characters that can be displayed and read as text. CSV and ASCII files are examples of text files. For CSV files you have to specify a character that separates the individual field values. In BI, you have to specify this separator character and an escape character which specifies this character as a component of the value if required. After specifying these characters, you have to use them in the file. ASCII files contain data in a specified length. The defined field length in the file must be the same as the assigned field in BI.
    Binary files contain data in the form of Bytes. A file of this type can contain any type of Byte value, including Bytes that cannot be displayed or read as text. In this case, the field values in the file have to be the same as the internal format of the assigned field in BI.
    Choose Properties if you want to display the general adapter properties.
                                e.      Select the path to the file that you want to load or enter the name of the file directly, for example C:/Daten/US/Kosten97.csv.
    You can also create a routine that determines the name of your file. If you do not create a routine to determine the name of the file, the system reads the file name directly from the File Name field.
                                  f.      Depending on the adapter and the file to be loaded, make further settings.
    ■       For binary files:
    Specify the character record settings for the data that you want to transfer.
    ■       Text-type files:
    Specify how many rows in your file are header rows and can therefore be ignored when the data is transferred.
    Specify the character record settings for the data that you want to transfer.
    For ASCII files:
    If you are loading data from an ASCII file, the data is requested with a fixed data record length.
    For CSV files:
    If you are loading data from an Excel CSV file, specify the data separator and the escape character.
    Specify the separator that your file uses to divide the fields in the Data Separator field.
    If the data separator character is a part of the value, the file indicates this by enclosing the value in particular start and end characters. Enter these start and end characters in the Escape Charactersfield.
    You chose the; character as the data separator. However, your file contains the value 12;45 for a field. If you set u201C as the escape character, the value in the file must be u201C12;45u201D so that 12;45 is loaded into BI. The complete value that you want to transfer has to be enclosed by the escape characters.
    If the escape characters do not enclose the value but are used within the value, the system interprets the escape characters as a normal part of the value. If you have specified u201C as the escape character, the value 12u201D45 is transferred as 12u201D45 and 12u201D45u201D is transferred as 12u201D45u201D.
    In a text editor (for example, Notepad) check the data separator and the escape character currently being used in the file. These depend on the country version of the file you used.
    Note that if you do not specify an escape character, the space character is interpreted as the escape character. We recommend that you use a different character as the escape character.
    If you select the Hex indicator, you can specify the data separator and the escape character in hexadecimal format. When you enter a character for the data separator and the escape character, these are displayed as hexadecimal code after the entries have been checked. A two character entry for a data separator or an escape sign is always interpreted as a hexadecimal entry.
                                g.      Make the settings for the number format (thousand separator and character used to represent a decimal point), as required.
                                h.      Make the settings for currency conversion, as required.
                                  i.      Make any further settings that are dependent on your selection, as required.
           5.      Go to the Proposal tab page.
    This tab page is only relevant for CSV files. For files in different formats, define the field list on the Fields tab page.
    Here you create a proposal for the field list of the DataSource based on the sample data from your CSV file.
                                a.      Specify the number of data records that you want to load and choose Upload Sample Data.
    The data is displayed in the upper area of the tab page in the format of your file.
    The system displays the proposal for the field list in the lower area of the tab page.
                                b.      In the table of proposed fields, use Copy to Field List to select the fields you want to copy to the field list of the DataSource. All fields are selected by default.
           6.      Go to the Fields tab page.
    Here you edit the fields that you transferred to the field list of the DataSource from the Proposal tab page. If you did not transfer the field list from a proposal, you can define the fields of the DataSource here.
                                a.      To define a field, choose Insert Row and specify a field name.
                                b.      Under Transfer, specify the decision-relevant DataSource fields that you want to be available for extraction and transferred to BI.
                                c.      Instead of generating a proposal for the field list, you can enter InfoObjects to define the fields of the DataSource. Under Template InfoObject, specify InfoObjects for the fields in BI. This allows you to transfer the technical properties of the InfoObjects into the DataSource field.
    Entering InfoObjects here does not equate to assigning them to DataSource fields. Assignments are made in the transformation. When you define the transformation, the system proposes the InfoObjects you entered here as InfoObjects that you might want to assign to a field.
                                d.      Change the data type of the field if required.
                                e.      Specify the key fields of the DataSource.
    These fields are generated as a secondary index in the PSA. This is important in ensuring good performance for data transfer process selections, in particular with semantic grouping.
                                  f.      Specify whether lowercase is supported.
                                g.      Specify whether the source provides the data in the internal or external format.
                                h.      If you choose the external format, ensure that the output length of the field (external length) is correct. Change the entries, as required.
                                  i.      If required, specify a conversion routine that converts data from an external format into an internal format.
                                  j.      Select the fields that you want to be able to set selection criteria for when scheduling a data request using an InfoPackage. Data for this type of field is transferred in accordance with the selection criteria specified in the InfoPackage.
                                k.      Choose the selection options (such as EQ, BT) that you want to be available for selection in the InfoPackage.
                                  l.      Under Field Type, specify whether the data to be selected is language-dependent or time-dependent, as required.
           7.      Check, save and activate the DataSource.
           8.      Go to the Preview tab page.
    If you select Read Preview Data, the number of data records you specified in your field selection is displayed in a preview.
    This function allows you to check whether the data formats and data are correct.
    For More Info:  http://help.sap.com/saphelp_nw70/helpdata/EN/43/01ed2fe3811a77e10000000a422035/content.htm

  • SAP ECC TO SAP SNC System

    Hi Experts,
    I have a Scenario like SAP ECC to SAP SNC (ASYNC).
    The problem was,  in the SXMB_MONI in the ACK Status it was showing one Question mark (with green colour). and also in the Outbound status, it was not showing any flag.
    what is the error at here but it was (ASYNC scenario) why it was expecting the ACKnowledgement.
    Thanks in Adavnce,
    Ram.

    Gangadhara,
    In PI/XI with SNC scenarios SAP provides default content such as Message Interfaces, Data Types and mappings.
    Take a look at this link, I think it can help you: [http://help.sap.com/esoa_scm_snc2007/helpdata/en/index.htm]
    Gabriela

  • Data loading from DSO to Cube

    Hi,
    I have a question,
    In book TBW10 i read about the data load from DSO to InfoCube
    " We feed the change log data to the InfoCube, 10, -10, and 30 add to the correct 30 value"
    My question is cube already have 10 value, if we are sending 10, -10 and 30 Values(delta), the total should be 40 instead of 30.
    Please some one explaine me.
    Thanks

    No, it will not be 40.
    It ll be 30 only.
    Since cube already has 10, so before image ll nullify it by sending -10 and then the correct value in after immage ll be added as 30.
    so it ll be like this 10-10+30 = 30.
    Thank-You.
    Regards,
    Vinod

  • How to find the data loaded from r/3 to bw

    hi
    how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild  and table the data is comming from . plz help
    thanks in advance to u all

    Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
    So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
    As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
    Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
    Good job
    GFV

  • Number of parallel process definition during data load from R/3 to BI

    Dear Friends,
    We are using Bi7.00. We have a requirement in which i should increase the number of parallel process during data load from R/3 to BI.  I want to modify this for a particular data source and check.Can experts provide helpful answers for the following question.
    1) When load is taking place or have taken place, where can we see how many parallel process that particular load has taken.
    2) Where should i change the setting for the number of parallel process for data load (from R/3 to BI) and not within BI.
    3) How system works and what will be net result of increasing or decreasing the number of parallel process.
    Expecting Experts help.
    Regards,
    M.M

    Dear Des Gallagher,
    Thank you very much for the useful information provided. The following was my observation.
    From the posts in this forum, i was given to understand that the setting for specific data source can be done in the infopackage and DTP level, i carried out the same and found that there is no change in the load, i.e., system by default takes only one parallel process even though i maintained 6.
    Can you kindly explain about the above mentioned point. i.e.,
    1) Even though the value is maintained in the infopackage level , will system consider it or not. -> if not then from which transaction system is able to derive the 1 parallel process.
    Actually we wanted to increase the package size but we failed because i could not understand what values have to be maintained  -> can you explain in detail
    Can you calrify my doubt and provide solution?
    Regards,
    M.M

  • Data load from R3 is slow and gives rfc connection error

    Hi all, is there any debug capabilties available on BI 7.0 when it comes to debug data load from R3 using rfc connection ( aleremote and bwiremote users )
    any ideas where can I look for solution.
    thanks.

    Hi,
    Check the connection between the R/3 and BW.
    or It may be the network problem contact system admin or basis people.
    thanks,
    dru

  • Summing up key figure in Cube - data load from ODS

    Hello Gurus,
    I am doing a data load from ODS to cube.
    The records in ODS are at line-item level, and all needs to be summed up at header level. There is only one key-figure. ODS has header and line-item fields.
    I am loading only header field data ( and not the item-field data) from ODS to Cube.
    I am expecting only-one record in cube ( for all the item-level records) with all the key-figures summed up. But couldn't see that.
    Can anyone please explain how to achieve it.
    I promise to reward points.
    =====
    Example to elaborate my point.
    In ODS
    Header-field  item-field   quantity
    123                301          10
    123                302           20
    123                303           30
    Expected record in Cube
    Header-field       Quantity
       123                    60  
    ====================
    Regards,
    Pramod.

    Hello Oscar and Paolo.
    Thanks for the reply. I am using BW 7.0
    Paolo suggested:
    >>If you don't add item number to cube and put quantity as adition in update rules >>from ODS to cube it works.
    I did that still I get 3 records in cube.
    Oscar Suggested:
    >>What kind of aggregate do you have for your key figure in update rules (update >>or no change)?
    It is "summation". And it cannot be changed. (Or at least I do not know how to change it.)
    There are other dimensions in the cube - which corresponds to the field(s) in ODS.
    But, I just mentioned these two (i.e. header and item-level) for simplicity.
    Can you please help?
    Thank you.
    Pramod.

Maybe you are looking for

  • How do I get an SCXI-1121 to turn on its output analog voltage?

    I don't know if this is operator error or a hardware problem. I have never used an SCXI-1121 before to provide power to an instrument. The incoming signal on the 1121 responds like a champ when I drive the instrument from an external power supply, in

  • Using cache just for some classes

    Hi, I'd like to use datastore cache just for some persistent objects. The cache should be active just for some objects and disabled for some other objects. The only one way I found is the following: I defined the default cache time-out to 0 millisecs

  • Problem with cl_abap_char_utilities= horizontal_tab in Unicode system

    Hello Experts, My code in 4.7 system was, *DATA: gf_tab TYPE x VALUE '9'.   CONCATENATE '[bc^bd128]' gp_user gf_tab gp_pw '[/]'   INTO        gf_anmeldung.   WRITE:  30  gf_anmeldung.* The output will be printed to a barcode printer and we get the ba

  • Simple question about a browser?

    Sorry that I'm so uninformed but could someone tell me what to do when something says: "Copy and paste into your browser." I don't know where to paste it to. It doesn't go in the URL line. Can you help?

  • Dialoguer avec un instrument sous teststand en utilisant le driver.dll

    Bonjour à tous, Alors dans un précédent post j'ai essayé de récupérer le pas IVI SpecAn sous teststand----> Pas possible Donc nouvelle solution : Je veux dialoguer avec mon analyseur de spectre sous teststand           - Configuer sous le MAX GPIB0::