Data loading to Infocube from SAP R/3 System
Hello Friends,
I started load in BW four days back in background. Initially i could able to see the load running in SM50 t.code. This load has 28 data packets. Out of 28, five data packets are successfully updated data to the cube, Remaining data packets are not through yet and in yellow colour. Now there is no job running in background in SM50 and i didn't find any runtime error in ST22.Source system is SAP R/3.The data is related to Employee HR Position.
Could anyone plz throw some light on this.Thanks in advance. Your responose will be appreciated.
Regards,
Sreekanth
Hi,
for this u have to chk the luw entries in SM58 of R/3....
if there are some entries ur load won't be successful...
and also chk these all
1) wht in the details of extraction is ur data selction ended?
2) after that chk in sm58 there shuld be no entire there...
3) still ur load is in yellow, u can maually change the status to RED and goto each data packet and right click and select manual update...this takes soemtime to turn into green...
do the same for all packets in yellow and then after the whole packets r green u can change the status from red to back to technical status..
rgds,
Similar Messages
-
Data Loading into Infocube from ECC.
Hi,
Can someone help me with the list of steps to be followed for loading data into infocube using Data trasnformation process. Steps to be perfomed in the system.
Also please share any links on various methods of loading data into infocube from ECC.
Thanks!The steps would be *** foloows:-
1) Create the info-objects.
2) Create the infocube. If you a Planning area and the cube is a replica of the PA you can use /SAPAPO/TS_PAREA_TO_ICUBE to create the infocube.
3) You create a source system as a file system.
4) You create the datasource with the relevant fields.
5) You create a transformation for the cube using the datasource you created in step 4.
6) Last step would be to create DTP. When you create the DTP, on the first screen, check the checkbox for "Do not load data from PSA". This will give you additional fields to enter the file path. When this DTP is created and generated, goto the last tab of the DTP to execute.
This will help you to directly pull the data from the file and load it into the cube.
You can also create a Process chain to automate this process.
Hope this helps.
Let me know in case of any more information. -
Master Data Load to APO from SAP MDM through SAP PI
Hi SDners,
This is a Parts Master Data Solution for one of the Largest Auto Manufacturer where SAP MDM will be the central hub of all the Global and Local attributes of Parts . The subscribing system is SAP SCM APO . Please advice if there is any possibility of direct integration between APO -MDM through PI. Does PI has the standard IDOC types to communicate with APO.
Also does APO has some RFC/BAPI to do master data load for Product Master /n/sapapo/mat1
Thanks,
PrabuddhaHi,
Check the LUWs in SM58 in source system and then execute it. Else check in BD87 and push the IDocs manually in ECC.
Thanks
Reddy
Edited by: Surendra Reddy on Feb 24, 2009 10:59 AM -
Loading attached documents from SAP R/3 system to BW/BI system
Dear Experts,
In SAP R/3 system, I created generic datasource to extract sales activities which are entered with transaction code VC01N. In SAP R/3 system, it is possible to attach documents (like word, Excel, pdf) to the sales activity. I need to upload these documents to SAP BW system as document to sales activity master data. I couldn't find where these attached documents are stored in SAP R/3 system. How can I find these documents?
If I find these documents, I will be able upload these to BW using "How to Mass Upload Documents to BW" document.
Thanks,
Ozgur YavuzkaraHi Girish,
I don't understand your question completely. Is your question related to the Internet Transaction Server? If it is a Web Dynpro question, I can move this thread to the Web Dynpro forum. What do you think?
- Henning -
Export data from SAP Document Management System to File System(FileStore)
Hi,
We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
Thanks,
NileshI'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.
-
How to load master data from SAP R/3 system like Customer master, materioal master , vendor master.............
Hi Bramha,
Check ...........
Re: master data loading in BI 7.0
/message/4708129#4708129 [original link is broken]
Re: Master data loading.
Regards,
Vijay. -
I need to load an InfoCube from an InfoSet - Is this possible in 2004s?
Greetings,
<b>This question looks long, but it's really not. I'm just trying to give a lot of detail about the screens that I am seeing. Anyway, here goes:</b>
I am in 2004s. I want to load an InfoCube from an InfoSet. I know that an InfoSet is just a view and does not physically store data, but recent documentation published by SAP seems to indicate that this is
possible in 2004s (There is a document called "Developer Guide - 2004s" that says the following:
"InfoSets are an additional, easily manageable data source for generic data extraction. They allow you to use logical databases of all SAP applications, table
joins, and further datasets as data sources for BI". )
So... that led me to believe an InfoSet could load an InfoCube. In other words, the InfoSet would be the source and the InfoCube would be the target. I am in RSA1, and I right-click on the cube that I want to be the target. I select the "Create Transformation" option from the context menu. In the "Create Transformation" screen that pops up, I enter "InfoCube" in the target object type field and the name of the InfoCube in the target name field. I enter "InfoSet" in the source object type field and the name of the InfoSet in the source name field.
I get a pop-up that says "Cannot generate proposal". I click the green arrow, and then I get an error message
that says "Transformation does not exist (see long text)".
When I click on the error message, I get the following information in the Performance Assistant:
"Transformation does not exist (see long text)
Message no. RSTRAN010
Diagnosis
The transformation specified by transformation ID , source and target , does not exist.
System Response
The system terminates processing."
Any help would be much appreciated! It seems like it must be possible to use an InfoSet as a source in a data load, or else it would not be an option in the "Create Transformation" screen. ????
I've also tried right-clicking on the cube and selecting "Create Data Transfer Process". I enter the same information on this screen: the types and names of the source and target. Then I get a pop-up that says "Source and target have not been linked with a transformationDo you want to generate a default transformation?". There are two buttons I can click: one labeled "Yes" and one labeled "Abbrechen". I choose "Yes", because I have no idea what "Abbrechen" means.
Then I get the same pop-up from before: "Cannot generate proposal". I hit the green arrow, and I'm back in the
"Create Data Transfer Process" screen. So... I'm stuck in an infinite loop of screens that I can't get out of.
If someone could help, I would be grateful! THANK YOU VERY MUCH!Thank you so much, Ram! I REALLY APPRECIATE YOUR HELP!
I am wondering if it possible to manually create a node in RSA6 for the InfoSet. I tried it by doing the following:
I went to RSA6 and clicked on the white icon for "Create Node". I then entered the number "8", followed by the name of the InfoSet. (I entered an "8", because all our DataSources seem to start with an "8". I'm not sure why.)
The DataSource now shows up, but when I double-click on it, nothing happens. When I select it in the hierarchy and then click the icons for "Display" or "Change" or "Check", I just get an error message that says, "You have not selected any DataSources."
Also, do you know where I can get my hands on the white paper?
Thanks again!
Regards,
Sarah-Jane -
How to extract Inventory data from SAP R/3 system
Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?
Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK -
How to extract the data into Excel / PDF from SAP
Hi,
We have spool number of a report output.
We want to extract the data into Excel / PDF from SAP directly...
Plz guide...Hi ,
Please check this [Thread|HOW TO DOWNLOAD SAP OUTPUT TO EXCEL FILE;. Hope your problem will be solved.
You can check [this also.|http://wiki.sdn.sap.com/wiki/display/sandbox/ToConvertSpoolDataintoPDFandExcelFormatandSenditinto+Mail]
Thanks,
Abhijit -
Data Flow from SAP Source (ECC) system to SAP BI system
Hi All,
I wanted to know how data will be flown from SAP Source system to SAP BI system.Data flow should include
1) Data will be flown by using the IDOCs?
2) What all are the interfaces involved while data is transferring?
3) What will happen exactly, if you execute the PSA?.
If you have any info on this, could you please post here....I
Regards,
K.Krishna Chaitanya.Hi Krishna,
Please go through this article :
"http://www.trinay.com/C6747810-561C-4ED6-B85C-8F32CF901602/FinalDownload/DownloadId-C2EB7035A229BFC0BB16C09174241DC8/C6747810-561C-4ED6-B85C-8F32CF901602/SAP%20BW%20Extraction.pdf".
Hope this answers all the mentioned questions.
Regards,
Sarika -
Connection from SAP to our systems involving 2 saprouters
connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table -
Tools available to extract documents from SAP document management system
Hi ,
Can anybody provide some valid information on
Tools available to extract the documents and their associated meta data from SAP Document Management system and DIR (Document Information Record) to non SAP document management sysyem ?
Thanks..Hi,
On ALE / EDI interface, you can use Message DOCMAS for triggering the outbound IDocs, you can use Program: RBDSEDOC
For ALE / EDI Configuration, you can refer the book by Arvand Nagpal which is a step by step guide.
Hope this helps.
Best Regards, Murugesh AS -
Unable to import idoc into PI 7.0 system from SAP r/3 system
Hi Experts,
I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
AnupamHi Francis,
This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
Thank you for all your support.
Regards
Anupam -
Is it possible to read Idocs from SAP R/3 System?
Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC
Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.
-
Error while loading data to an Infocube from 0EC_PCA_1 extractor
Hi,
I am trying to load data to the infocube form the extarctor 0EC_PCA_1(Profit centre:Transaction Data on Acounts).It is giving the following error.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Please provide your inputs.
Thanks in advance!!!Hi,
The following is the total error message.
Extraction (messages): Errors occurred
Error occurred in the data selection
Error 4 when starting the extraction program
Errors in source system
The data extraction is terminated.
Thanks,
Bhagyarekha.
Maybe you are looking for
-
External monitor works only works when laptop screen displays
Hi there, I just connected a different (newer, but not brand new) external monitor to my T61. When I toggle screens (fn-f7) the external display gets no signal in the 'external display only' position, but displays beautifully in the 'both' position.
-
OAF newbie here. I'm trying to extend the Quick Update page of the Supplier form, exact page is /oracle/apps/pos/supplier/webui/QuickUpdatePG. Here's what I did: 1. Copied all files/folders from $JAVA_TOP/oracle/apps/pos to C:\jdevR12_1_1\jdevhome\jd
-
Blog post on deploying mapviewer in websphere
For those who may be interested, LJ's recent blog post describes how to deploy mapviewer (11.1.1.5) on websphere 7. http://oraclemaps.blogspot.com/2011/07/deploying-mapviewer-on-ibm-websphere-7.html
-
UWL workitem error - java.lang.IndexOutofBoundsException
Any alternative solutions/workaround are welcome. 1. e.g. make the UWL refresh faster. 2.Current Delta Cache validity period or iview is disable for UWL. 3.We encountered the below UWL bugs @ EP 7.0 SPS9, Patched JTECHF level 11 and JTECHS level 12.
-
SAaving as AVI an importing into organizer is working well. Saving as mpeg and importing into library crashes PE8. Any help? I feel like I'm fighting an uphill battle with this program rather than enjoying it like I'm supposed to.