Unable to import idoc into PI 7.0 system from SAP r/3 system

Hi Experts,
I am getting an error while importing an Idoc structure from SAP r/3 system. The error says "unable to read Idoc segments". The Idoc has recently undergone changes. When We are looking at the struture of idoc through IDOCSYN table it is showing updated structure in SAP R/3 system but import to SAP XI is failing.
Can you suggest some way to tackle this kind of problem.
regards
Anupam

Hi Francis,
This was indeed an authorization issue. Thank you so much for your valuable suggestion. The user lacked proper authorization to import the idocs.
Hi All,
Thank you for all your support.
Regards
Anupam

Similar Messages

Unable to import IDoc into NWBPM from NWDS

Dear PO Experts,
We are migrating an existing interface
(IDoc<-->PI<-->SOAP using BPM (Multiple sync calls)).
We are un able to import IDoc into NW BPM project as a service Interface. (For BPM we exported IDoc into local system as an external definition and did few modifications to the xsd as per below blog and exported back to PO server as an external definition.Create Service Interface for the same .
http://scn.sap.com/community/process-orchestration/blog/2014/09/24/idoc-to-nw-bpm-scenario#comment-542653 )
We are getting below exception while importing IDoc Service Interface into BPM project.I have attached IDoc WSDL file for your reference.Could you please share your expertise on this issue.
>>>An internal error occurred during: "Importing MOIN models for XSDs and WSDLs...".
java.lang.OutOfMemoryError: Java heap space
at java.util.ArrayList.<init>(ArrayList.java:112)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.initialize
(XSDParticleImpl.java:1271)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.<init>
(XSDParticleImpl.java:1050)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.initialize
(XSDParticleImpl.java:1149)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.<init>
(XSDParticleImpl.java:1039)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.initialize
(XSDParticleImpl.java:1272)
at org.eclipse.xsd.impl.XSDParticleImpl$XSDNFA.<init>
(XSDParticleImpl.java:1060)
at org.eclipse.xsd.impl.XSDParticleImpl.getDFA
(XSDParticleImpl.java:2041)
at org.eclipse.xsd.impl.XSDModelGroupImpl.validateRoot
(XSDModelGroupImpl.java:599)
at org.eclipse.xsd.impl.XSDComplexTypeDefinitionImpl.validate
(XSDComplexTypeDefinitionImpl.java:1408)
at org.eclipse.xsd.impl.XSDConcreteComponentImpl.validate
(XSDConcreteComponentImpl.java:565)
at org.eclipse.xsd.impl.XSDSchemaImpl.validate(XSDSchemaImpl.java:1653)
at com.sap.tc.esmp.tools.core.util.EMFUtils.validate(EMFUtils.java:613)
at
com.sap.tc.esmp.tools.xsd.xml.EmfSchemaImporter.calculateAffectedPartitions(EmfSchemaImporter.java:903)
at
com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.calculateAffectedPartitions(Wsdl1Importer.java:365)
at
com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.resolveImportLink(Wsdl1Importer.java:545)
at
com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.createChainLink(Wsdl1Importer.java:522)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.init
(Wsdl1Importer.java:461)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer$ImportChain.<init>
(Wsdl1Importer.java:337)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer.prepareWsdlImport
(Wsdl1Importer.java:1381)
at com.sap.tc.esmp.tools.wsdl1import.Wsdl1Importer.prepareWsdlImport
(Wsdl1Importer.java:1368)
at com.sap.tc.esmp.tools.facade.Import.prepareWsdlImport
(Import.java:106)
at
com.sap.tc.esmp.tools.editor.jobs.RepositoryMetadataProcessor.doImportFiles(RepositoryMetadataProcessor.java:298)
at
com.sap.tc.esmp.tools.editor.jobs.RepositoryMetadataProcessor.access$300(RepositoryMetadataProcessor.java:52)
at com.sap.tc.esmp.tools.editor.jobs.RepositoryMetadataProcessor$4.run
(RepositoryMetadataProcessor.java:248)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Regards
Venkat

Hi Venkat,
Find the below link.
http://scn.sap.com/community/process-orchestration/blog/2014/11/29/using-idocs-in-nwbpm

Unable to import IDoc into IR

Hi - For no reason i can't import the IDoc into XI.
The problem seems to be that in backend system is a problem. The basis-type and the segments are all released - to me because i released and de-released them. The Idoc was developed in client 010 and i want to import ist from 011 - of course there was some kind of transport!
In WE20 of backend system i am not able to pick this IDoc for Incoming parameter, no idea why.
In XI i am able to import MetaData via IDX2 but i am still not able to import the IDoc!!
can somebody help?! br Jens

Hi,
1 Scenario
This guide deals with all the configurations required to create an IDoc adapter in Exchange Infrastructure
3.0 to send an IDoc from XI to the SAP backend system.
Unlike other types of adapters, the IDoc adapter has dependencies on the XI 3.0 ABAP configurations and
the backend SAP system configurations. Those configurations information will have to be either created
first or retrieved in order to complete the IDoc adapter configuration.
2 Introduction
Configuring IDoc adapter in Exchange Infrastructure 3.0 requires some configuration on the SAP
systems, for both XI and the backend system where the IDoc message is to be sent. These steps, although
simple, are many times missed or mis-configured, causing the delivery of messages to fail.
Since IDoc adapter uses the ABAP stack, instead of J2EE, the configuration requirements are mainly in
ABAP.
Setting up IDoc adapters requires the XI integration server to be able to communicate with the backend
SAP system, and also to make sure that the Logical System Name used when posting IDoc exists on the
backend SAP system.
3 The Step By Step Solution
The basic steps for the IDoc configuration are outline below:
1. Configure SM59 on XI to communicate to SAP backend system.
2. Configure port on XI for IDoc communication.
3. Create or verify the Logical System Name on the SAP backend system.
4. Create or verify business system in XIs System Landscape Directory.
5. Verify the Logical System Name of the business system.
6. Verify or add the Logical System Name for the sender business system.
7. Create/configure the Communication Channel for the IDoc receiver adapter
3.1 Configure SM59 on XI to communicate to SAP backend system.
1. Using transaction SM59, create an RFC destination with Connection Type = 3.
In this example, the RFC destination name is NDVCLNT510.
2. Enter the logon information:
3. Test the connection by clicking on Testing connection and Remote logon.
Both must be successful.
3.2 Configure port on XI for IDoc communication.
4. Go to transaction IDX1 on XI, and create a port. In this example, the Port name is SAPNDV.
     The Port name must be in the form of SAPxxx, where xxx is the system ID of the backend SAP
system.
     The Client must be the client number of the backend SAP system.
     Select the RFC Destination which was created in the previous step.
3.3 Create or verify the Logical System Name on the SAP backend system.
5. Enter transaction SALE on the SAP backend system.
6. Create or verify the Logical System Name. In our example, NDVCLNT510 is verified.
3.4 Create or verify business system in XIs System Landscape Directory.
The business system name for the SAP backend system must contain a valid Logical System Name. This Logical System Name is the one verified or created in the previous step.
7. In the System Landscape Directory, select the SAP backend business system. If one does not exist, then create the business system. Verify the Logical System Name.
3.5 Verify the Logical System Name of the business system.
8. In the Integration Directory, doubleclick on the business system (in our example, it is NDVCLNT510).
Navigate the menu:
Service Adapter Specific Identifiers.
If information is empty or incorrect, then it will have to be synchronized with the content of the System Landscape Directory. Follow the steps below for synchronization.
9. (Optional) Synchronization of the business system in Integration Directory to the business system in System
Landscape Directory.
     Double-click on the business system in the Integration Directory.
     Switch to Edit mode.
     Select menu: Service Adapter-Specific Identifiers
10. (Optional) Within the dialog box, click on the button as indicated below to resynchronize.
11. (Optional) If the expected data from the System Landscape Directory is not updated, then the SLD cache may need to be cleared first.
3.7 Create/configure the Communication Channel for the IDoc receiver adapter.
15. In the Integration Directory, create an IDoc receiver communication channel.
     The RFC Destination is from step 3.1.
     The Port is from step 3.2.
NOTE:
There is no need to create an IDoc sender Communication Channel for XI. Instead, the backend SAP system must be configure to send the IDoc to XI.
4 Appendix
Transaction: IDX2
There are a couple of situation where IDX2 can be useful on the XI system.
1. When we want to test connection between the XI and SAP backend system.
2. When an IDoc has changed, and the meta data stored in XI needs to be update. When an IDoc is sent from the SAP backend system to XI, XI will first check to see if the meta data for the IDoc is already in its persistent cache. If not, then XI will use the configuration in IDX1 to retrieve the IDoc meta data from the backend system. If the
meta is already in cache, then it will NOT do so. Therefore, when an IDoc has changed, it is necessary to manually update the new meta data on XI, or delete it from the cache, so that the latest version can be retrieved. IDX2 is used for this purpose.
Go to transaction IDX2 and click on Create.
Enter the IDoc Type and the Source Port as defined in step #2. Click Continue.If successful, the following will show up. If error occurs, then the IDX1 configurations will need to be re-checked.
Regards
Hemant
Award point if find helpful

I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to customer. Can you please help me on the same?

HI Experts,
I have a scenario. Import IDOC into PI and PI transform IDOC to Excel. Using mail adapter attach that Excel using pi and send to vendor. Can you please help me on the same?
Thanks
SaiSreevastav

Hi Sai,
you can use XSLT or java mapping or adapter module to convert IDOC xml to XLS. Please refer the below blog
Convert incoming XML to Excel or Excel XML – Part 1 - XSLT Way
Convert incoming XML to Excel Sheet Part 2 – Adapter Module way
Convert incoming XML to Excel Sheet
then after converting to Excel, you can use the payloadswap bean in mail adapter
XI: Sender mail adapter - PayloadSwapBean - Step by step
regards,
Harish

Unable to import a vid clip of 267 MB from iphoto (6.0.6) to imovie (6.0.3)

I am unable to import a vid clip of 267 MB from iphoto (6.0.6) to imovie (6.0.3). I tried changing the format from MPEG 1 to MPEG 4 via streamclip 1.8 but when trying to import a window comes up saying "Error during import - the file could not be imported: unknown error". It says this no matter what format I try. (MPEG 1,2,4 and compressing it to a zip. file. (20KBs, 44KBs, 115MBs etc.). Imovie "HELP" says that it should import at least the clip in the MPEG 4 format (115.9 MBs). Any thoughts on this appreciated ---- Toroya

is your converted file playable with Quicktime Player?
rename your converted file in Finder .. avoid any 'special' characters as  ☜ ©, blanks, 'signs' | \ …= dots ] ... just letters...
.. just to mention: iM is a DV-editor.. preferrable, you should work with 'dv-streams' = best quality, no loss, have a look in Streamclip's Export Options ... esp. when working with allready highly compressed material as mpegs ....

Recently, I have been unable to import all of the "songs" or discs from multi-CD operas in itunes to my ipod classic or network hard drive. Only 1 or 2 discs import despite plenty of available space in both devices. Very frustrating! Any suggestions?

Recently, I have been unable to import all of the "songs" or discs from multi-CD operas in itunes to my ipod classic or Seagate network hard drive. Only 1 or 2 discs or 20 or so "songs" out of a total of 40 - 80 import despite plenty of available space in both devices. When I check itunes, each opera disc with all of the "songs" are listed. Very frustrating! Any suggestions?

right click on the songs that do transfer and select create aac version then re sync
Peace, Clyde

Is it possible to read Idocs from SAP R/3 System?

Is it possible to read Idocs from SAP R/3 System? Instead of the aRFC

Unless Hydra emulates ECC sending IDOCS, then you just might want to use the WSMessageListener (http://help.sap.com/saphelp_xmii120/helpdata/en/45/6a86ac88130dece10000000a11466f/frameset.htm) and configure your message processing rules accordingly.

Transporting into a new BW system from a shared dev system

We are currently in the process of setting up a new BW system in the same landscape as our existing one where both boxes will share the same dev system. Our existing one is used by many different applications and has tonnes of shared objects on it. Our new box will only be used for SEM-BCS and thus does not need everything else that the other box contains. Since many objects are dependant on others (attributes and such) I am finding it hard to get transports into the new system. There always seems to be something missing even when I try to just move a single object. I also seem to be having troubles with InfoObject Catalogs where they cannot be moved if the InfoObjects are not there and the InfoObjects a cannot be moved with the Catalogs not there. This is all starting to give me a serious headache.
Has anyone delt with transporting to separate systems from a common development system? What is the best approach to this to ensure we only move what we need to the new system?

The transporting is the same, however there are a lot of dependant objects that also need to be brought into our system. I'm looking for a way to minimize what I need to transport into our new system.
Collecting automatically doesn;t seem to be working for me since it does not collect everything I need and when I add that missing object I then seem to be missing another list of objects. It seems to be a never ending cycle.

Unable to Import objects into ID

Hi All,
For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
Unable to move object. Change lists were not part of the same import
I tried to activate the change list..but no woek.
Could anyone please advice?
BR
Soumya

Have you checked the GUID in SLD in both the systems?
SLD-->Software Components, to check the GUID.
You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
Note: Before deleting SWCV, make sure any other working objects are not there in the same SWCV.
Now, if SWCV & GUID in both systems are same then again:
1. Export the objects from Dev (.tpz file)
2. Imort the same .tpz file to QA system.
Now go to Repository of QA and
1. Tools --> Import Design Objects
2. Tools --> Transfer from system landscape Directory --> Update Application Components.
Select your components and press Finish button.
And finally try to Acitvate your objects.
Regards,
Sarvesh
*****Reward points, if found helpfull.

Unable to import IDoc from ECC to PI 7.1(ESR)

Hi,
I am creating an IDoc to File scenario in PI7.1 . I am trying to import the MATMAS IDoc from ECC to PI 7.1.So under the SWCV -> Imported Objects - > Wizard to import IDod/RFC opens -> I enter the ECC system login details -> But when I expand the IDoc node here,I find no IDoc from ECC ,moreover it throws me an error " component should be attached to some frame or dialog"
Can you please suggest me as what is going wrong.
Thanks,
Venu

Hi all,
I am using PI 7.3
When I Import object and passing parameter like application server, system number, uid and password.
I got this error
Unable to establish connection to R/3 system servertm_TM9_06 (system=00, client=001)
Troubleshooting information:
Is the target system online?
Check the connection data; server name and group fields are case-sensitive
Tips for administrators (see configuration guide for details):
Does the user have sufficient authorization in the target system?
Is the target system configured correctly in etc/services?
See error logs for details
Please help me.

Unable to import IDOC metadata from 4.6C based R/3 system

As part of a project we are trying to import IDOC interface definition into XI3.0 from our 4.6C based R/3 System. I have gone through the pre-requisites mentioned at
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/frameset.htm
One of the OSS notes 672745 in the above pre-requisites talks about applying basis component patch SAPKB46C46. Our current R/3 System is on the basis patch SAPKB46C39. Is there a way to import just the required function modules without applying the whole patch so that we can
continue with the projet ?
cheers.
Ramesh Babu

There is no SM59 RFC destination involved.
Go to SM59 of the XI box and check, the R/3 system for which XI is having RFC destinations.
And before importing, hope you have given R/3 system IP address, client , user id and Password correctly in the Software componenet version.
Is there a workaround for this?. I remember reading in this forum, that there are other ways of importing IDOC message and interface objects as XSD files directly instead of using import wizard.
>> For this you need to download the Idoc Schema from the R/3 system and then import this schema in the External Definition as a xsd type.
But you need to connect to R/3 system and import the Idoc, Because in the directory, you are going to use Idoc itself as an Message Interface. So the xsd used for changing the occurence of the Idoc type, so that you can post mulitiple idocs.
Hope this helps,
Regards,
Moorthy

Unable to Import Idoc from R/3 System.

Hi,
I am facing an error while importing Idoc (SERDAT.SEERDAT01) from 4.6c R/3 system, the errror is "unable to read the segments" and the same Idoc I am able to import successfully from ECC6 system. Please let the solution for the same.
Thanks & Regards,
Pragathi.

check if you have the proper authorizations
From Note: 837595
Authorization object S_RFC
Field name RFC_TYPE value FUGR
Field name RFC_NAME value EDIMEXT, SDTX
Field name ACTVT    value 16
Authorization object S_IDOCDEFT
Field name ACTVT   value 03
Field name EDI_CIM value ' '
Field name EDI_DOC value TXTRAW01
Field name EDI_TCD value WE30
Authorization object S_CTS_ADMI
Field name CTS_ADMFCT value TABL
Authorization object S_TABU_DIS
Field name ACTVT      value 03
Field name DICBERCLS value

Unable to Import metadata into RPD

Hi,
I have installed OBIEE 111.1.1.6 on the sever and OBIEe client tools on my local desktop.
now when i am trying to import metadata into my rpd by connecting to database it shows me the error "Unable to connect"
can you please let me know if i am missing any prerequisties on my local desktop or any settings that i need to actualy srt importing?
Please help me.
Thanks

If the call interface is OCI, enter a full connect string or a net service name from the tnsnames.ora file you set up within the Oracle Business Intelligence environment, in ORACLE_HOME/network/admin.
If you are using a native interface for a different database, enter the name of the database for that system.
If the call interface is ODBC, the data source name field displays a list containing all the User and System DSNs defined for ODBC on the local computer. Select the correct one for the data source to which you want connect.
If it is helpful, please mark as correct or helpful

Unable to import videos into iTunes library

For the past few week I have been unable to import videos from my computer into the iTunes library using either the drag and drop or import file methods. I am using the latest version of iTunes and a second generation iPod touch.
I have tried using file formats: wmv, av1, mpeg & mp.4 but all refuse to load into the library. To test I have changed a file name of a video that was successfully loaded into the library a while ago and this file also refuses to load. I have also used 'Smart FLV Converter' to convert the files to 'MP4 for iPod' and this converted file also cannot be imported. All of the files play OK from the desktop.
Any suggestions as to how to overcomne this problem would be appreciated

I don't know if this helps but my iTunes was crashing everytime I tried to add a file located in the "My videos" folder. I moved the files to "My Music" Folder and had no problems. Seems like a simple/stupid solution but it worked for me. I still don't know why it wasn't allowing me to do it in the first place.

Unable to import jpegs into Library

HI all,
I hoping somenone has come across a similar issue and resolved it. When trying to import my jpegs from both my iphone and my digital camera the import runs but at the end when prompted to keep originals or remove a message box prompts with the folllowing:
Unreadable Files: 26
The following files could not be imported.(the Import failed)
Has anyone had this and resolved it. Its disastrous for me at the moment as i cannot back up all my photos of my new born girl.

TD
Thank you for your response, but unfortunately this did not help as i get the same issue as before - "The following files could not be imported (they may be an unrecognised file type or the files may not contain valid data)"
I now have another problem, where when i now open iPhoto it comes up with this message box:
25 photos were found in the iPhoto library that were not imported. Would you like to import them Yes or No.
if i click yes it tries to import them, shows the above error message again (files could not be imported etc) then creates an album titled recovered photo's with no pictures in it.It also actually downloads the photos to a file on the HD titled " iPhoto Library Recovered Photos"
If i click NO a message box appears stating " these photo's have been placed in folder xx/xx/xx etc titled " iPhoto Library Recovered Photos", so i now have 2 folders with the same pictures, but still unable to import. Plus i cannot stop iPhoto doing the above. every time i open it i get the above message and it creates a new recovered folder.
I am now worse off than when i started.
Help.

Unable to import idoc into PI 7.0 system from SAP r/3 system

Similar Messages

Maybe you are looking for