Data not saving in Custom Infotype

Dear Experts,
I have created a custom infotype, 9003, for this I creates a structure ps9003.
And I have to create a primary key field in my infotype, so I added a field in PA9003 as key field.
Now this key field was not coming in the infotype screen, so I added it using screen painter.
But now when I save the data the data is not saved in this key filed.
Please Suggest.
Warm Regards,
Upendra Agrawal

Hi
As of my knowledge the primary key for the PA infotypes will be MANDT+PAKEY structure.  What is the need of adding the primary key.
- While creating the custom infotype using PM01 screen will be automatically generated for the fields declared in PS structure
- Screen Generation will wipe out the custom written on the fields so this is to be carefully handled.
- if you added the field check logic in PAI & PBO
- Check are you passing the data back to the infotye structure

Similar Messages

  • Data not storing in Custom infotype build with tab strips

    Hi All,
    I have created one custom infotype 9030,
    With screen 2000.
    which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
    where I am doing wrong...please let me know what should be done in this case.
    Regards
    Satish.v

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

  • Manual Layout data not saving to trx cube

    Hello BPS Experts,
    I am trying to load some data using manual planning. I open the layout and enter the values and press save. I do not find any requests / data in the cube.
    case 1) No error / warning
    I do not get any error during the save function in the layout. What could be the possible step I am missing. What could be the root cause..
    case 2) message - No data to be saved
    sometimes i get a message 'No data to be saved'. And that data is not getting saved. What could be the reason of this message.
    Regards,
    BWer
    Message was edited by: BWer

    Hello BWer,
    One of the main reasons for data not saving from a layout into a Trx cube, is if there is no key figure being updated. The value of the key figure being posted should <> 0.
    If you choose the option to display transaction data in your layout, then, only data with key figure values <> 0 will be displayed.
    Sunil

  • Data is not saving in customer subscreen of ME21N

    Hi Friends,
    I have implemented BADI ME_GUI_PO_CUST for adding a tab and subscreen in PO.
    I have also implemented BADI ME_PROCESS_PO_CUST for displaying screen elements.
    Everything is OK except it is not saving in the database through ME21N/ME22N.
    I have added append structure in EKKO, MEPOHEADER and added flag in MEPOHEADERX; tried many things in code but it is not saving.
    Please tell me if i am missing any step...
    Points will be awarded.

    Hi,
    I solved the probelm by mine. We have to create a Z table with the same structure like screen and also with EBELN.
    And save data in internal table TRANSPORT_TO_MODEL and read from internal table if entry saved in TRANSPORT_FROM_MODEL. (ME_GUI_PO_CUST)
    After that in ME_PROCESS_PO_CUST, implement in OPEN method, write code for selecting from Z table.
    Write code in POST method for saving in that Z table.
    Do not forget for all these excersies we have to use function module that will reside in same function group where the subscreen resides.
    Good i should give pat on my shoulder.
    Regards
    Krishnendu

  • Candidate Profile - External Candidates- Data not saving

    HI All,
    I have a developed a custom Web Dynpro application and added it to the Candidate Profile.
    This Custom Webdynpro application is updating a custom infotype.
    When I run the candidate profile application for external candidates, it does not save data in the custom infotypes but it is working(saving) fine for internal candidates.
    Also I noted that there the standard Education infotype updating the standard infotype is saving data and working fine even for external candidate.
    Can anyone help me on this?
    Is it Infotype Authorization issue?
    Thanks,
    Shilpa.

    Hey Nicole,
    Can it be some infotype level authorizations that we need to maintain.
    Because the standard application for education, updating infotype 5104 is working fine for both internal and external candidate.
    But my custom application updating the custom infotype(9XXX) is working fine(i.e. saving data) for internal candidate but not for external candidate.
    Thanks,
    Shilpa.

  • Record not appearing in custom infotype without selecting the period.

    Hi All,
    I have created a HR Custom Infotype for Medical Examination. Whenever i create a record for a particular employee and again i click on the Display button for the same employee, a message is diplayed "No data stored for Medical Examination details in the selected period". And when i select the ALL radio-button in the period selection area,only then the record is displayed. Why is it so that manually i need to select the ALL radiobutton to display the record? It is not so for other infotypes. Is there any solution for this, i mean can we change some settings to resolve this issue?
    Thanks in advance,
    Arpita Raizada.

    In PA20/30 we have period from and to dates on screen. If any date is entered on these screens then data from infotype is displayed based on these dates.
    If your record doesn't overlap/falls with these entered dates then system displays the message. Changes the period dates accordingly and system will display the records valid as of entered date.
    Regards,
    Ramnivas

  • Data not saved in database

    hi,
         i'v a prob. that once i create quation through va21 then it create and saved data.
    now when i create sales order through va01  then it show data saved and gave the sales order no.
    but when i 'm going to change it then message comes order not in data base.
    when i saw the data in table like vbak/ vbap then i found no data.
    what is the prob.
    pl. help me.
    mukesh

    Hi Mukesh,
    May be the data is not saved at all. Use TCODE SM12 and SM13 to check if there are entries for the corresponding table under processing
    Regards

  • Response data not saved in PDF

    Dear All,
    I created an interactive form with a web service. I filled in the form and sent all the datas in SAP through the web service.
    All worked properly except that I have a return message from SAP. This message is binded in my form as response field.
    I saw my message in the form when the WS is finished but I saved the PDF on my PC.
    When I look at my PDF later, the return message is disappeared, it is not saved in my PDF as all the other fields.
    Thanks to help me
    Kind regards
    Véronique.

    Dear all,
    Can someone help me ?
    All the other data are saved in the document. But I think that it is because the return message is not keyed but is only a answer in the web service, the PDF can't save it ?
    If I change the field (add some character after the return value from SAP) and I save, the value is kept.
    Could someone tell me how to do ?
    My button is an Execute one with the data connection on my web service.
    If I re-merge data, all the fields become empty except the response return message. Even in this case, the message is not saved in the PDF.
    It is important !
    Thanks
    Kind regards
    Véronique

  • Hierarchy Data not saved after Hierarchy Load

    Hi Gurus,
    I am facing a problem with the hierarchy data load in SAP BPC NW 7.5 SP06. I have already used /CPMB/IMPORT_IOBJ_MASTER & /CPMB/IMPORT_IOBJ_HIER once to load the data from BI to BPC and it worked fine that time.
    Now I have made some changes in the Hierarchy at the BI side. When I run the package link list, the /CPMB/IMPORT_IOBJ_MASTER chain runs fine and the master data, description for Attribute and Hierarchies are loaded perfectly. But whn the /CPMB/IMPORT_IOBJ_HIER is run, the changes are not saved in the BPC Member sheet. I have manually make the changes in the member sheet and Process the Dimension.
    Can we process the Dimension explicitly after the Hierarchy load again?
    Does anyone have an idea about this?
    Any help is appreciated.
    Thanks,
    Abhishek

    Abhishek,
    Double check whether  /CPMB/IMPORT_IOBJ_MASTER is bringing all the ID's,Texts and Hierarchy Nodes. If required drop the data from dimesion member sheet and load it again.
    Double check the Hierarchy and level setup while running /CPMB/IMPORT_IOBJ_HIER.
    (when we are in SP05, it was not bringing the multiple Hierarchies, now we are in SP07 loading multiple hierarchies but not the TEXT fo the Id's some inconsistency)
    Thanks

  • Not to Update custom infotype

    Hi Expert,
    I have one custom FM which is used to update the custom infotype but my requirement is when it get fail it should not update
    the infotype but it is updating.Befor this FM we are performing operation i. e MASSN  07,08, .
    This requirement is based on contract renewal when contract is not renewed it should not update custom infotype bue it is
    updating when contract is not renewed through the above FM.
    please give me some idea so that custom infotype should not get updated when contract is not renewed.But it is
    updating the infotype what should i put to not update the infotype when contract is not renewal.
    Below is my listed code.
        IF lv_action =  '09' OR lv_action = '07' OR lv_action = '08' AND lv_cr_renewal = ''.
        CALL FUNCTION 'ZF_HCM_ALM_ABSENCE_DATA'
            EXPORTING
              i_pernr                 = lv_pernr
              i_effective_date        = lv_date
              i_updation              = 'X'
    TABLES
      T_ABSENCE_DATA          =
          t_return                = lt_return_absence
    Regards,
    Md
    Edited by: MdAddu on Jun 26, 2011 9:33 AM
    Edited by: MdAddu on Jun 26, 2011 9:52 AM

    Hi,
    Write the code as :
    IF ( lv_action = '09'  OR lv_action = '07' OR lv_action = '08' )
      AND lv_cr_renewal = ''.     "-- contract renewed ...
    CALL FUNCTION 'ZF_HCM_ALM_ABSENCE_DATA'
    EXPORTING
    i_pernr = lv_pernr
    i_effective_date = lv_date
    i_updation = 'X'
    TABLES
    T_ABSENCE_DATA =
    t_return = lt_return_absence
    Regards,
    Srini.

  • Data not saving in flowable form

    Hi,
    I have created a form where there are flowable and positioned parts. In the attachment section, data entered into Attachment A (flowable) seems to save, but after saving, closing and re-opening, the data has not saved.  The data entered into Attachment B and the rest of the form does save.
    Can I send the file to someone to have a look?
    Thanks.

    Please send your form to [email protected]
    I will try to look into the issue..
    Nith

  • Last Dunning Data not generated for customer account

    Hi Gurus,
    I have run the Dunning for a customer, it was successfully data generated to the customer account and able to see dunning history until 1st  and 2nd runs, but 3rd and final dunned but no data generated for the particular customer.
    In this time i find few other line items are additioned to the previous line item.
    The 3rd dunning days are already exceeded the grace days, but not data generated because of additional items are not eligible for dun this time they have good enough time as grace days.
    So this is caused, and no data generated to the for the respective line item which has to get the data for it's 3rd dun.
    When i run for some future time 3rd dunning was successfully got and data updated, for additional items also got dunned 1st reminder this time because they are also eligible this time..
    In my dunning procedure i have selected for always dun for all intervals and print line items for last dun.
    Your inputs are highly appreciated.
    Thanks in advance, points are avails.
    Thanks,
    Vyas

    Hi
    Any Updates on this ..
    Thanks in advance,
    Vyas

  • File- XI- IDoc: Idoc header data not saved correctly

    Hi guys!
    I have a very strange problem:
    I have a file to xi to IDoc scenario. Everything seems to be fine, IDoc is created in target system, but with strange error: <MESCOD>XX</MESCOD> segment is not written in IDoc header segment. This segment is available in message sent to ECC (after mapping), so there is no problem with ommiting the segment in mapping. But it's not saved. 
    This scenario worx fine in QA, but not in PRO.
    Any ideas, what to look at?
    Thanx  a lot! Olian

    Hi,
    check the IDoc which was in PROD. and see the ibound status and actual reason .
    depending upon the actual status you can resolve the issue.
    Chilla

  • Text fields are not displayed for custom infotypes in Adhoc query

    We have developed a custom infotype , which we had incldued in the adhoc query.  when we generate output , it is showng codes instead of text . In the output filed , it is hwoing only vaue and Vale and text is diabled.
    please let me know , how to add text in the out filed filed
    thanks
    rajaram B bhat

    HI
    But in the out put filed , when  i click on the output filed , i am get three drop downs , only text , only value and valu & text.
    Only value is enabled and other two ate disabled.
    How to enable the othet two , i.e text only and value & text
    thanks & regards
    Rajaram B Bhat

  • Custom tab data not saving in ME22N w/ BAdI ME_PROCESS_PO_CUST

    Hello all,
    I have implemented BAdis ME_PROCESS_PO_CUST & ME_GUI_PO_CUST and created a custom tab at the header level in ME21N/ME22N. I have fields such as Delivery Date and Ex Factory Date in my tab.
    We are able to put data in these fields and have that data populate their respective fields in the Purchase Order.
    Our users would like to be able to run ME22N and select certain line items and have only those items changed with the data from the custom fields. 
    So, my question is how do I handle line selection in the context of these BAdIs?  Is there a way to know which lines have been selected and then only change the data in those items?
    I have looked in Class CL_PO_ITEM_HANDLE_MM for an attribute or method that might help but I haven't found anything as of yet. 
    I have found that the field MEPO1211-TCSELFLAG is set when a line is selected in ME22N.  However, I haven't found a way to work with it.  It doesn't get passed to any of the methods in the BAdIs, as far as I know. 
    January 27, 2012  **************
    We were able to capture the lines selected by using code from method mass_change in Include LMEGUICJK, Function Group MEGUI.  The lines are in the lt_models table. 
    So, now my issue is getting data to save in ME22N.  When I put data in my custom tabs and select a line, the data gets changed on the screen but does not save.  It does work when I make a change in another field, like changing the description for instance.  I'm using the set_changed method in Process_Header from ME_PROCESS_PO_CUST but it doesn't work. 
    I'm getting the idea that I'm the first ABAP developer to try this...
    Thanks for any help.
    Kind Regards,
    Chris
    Edited by: Chris  Mowl on Jan 11, 2012 10:33 AM
    Edited by: Chris  Mowl on Jan 11, 2012 4:24 PM
    Edited by: Chris  Mowl on Jan 27, 2012 10:57 AM
    Edited by: Chris  Mowl on Jan 27, 2012 2:00 PM

    Hi,
    Checkout the below link :
    <link to blacklisted site removed by moderator>
    Shailaja Ainala.
    Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

Maybe you are looking for