Data Reflection in ECC table from CRM table

Dear All,
I have two Z tables. One in CRM and the other is in ECC with the same structure.
I want the data to be transferred in ECC table whenever there is a new entry created in CRM table.
For Eg : If I create an entry say XYZ in CRM table either through SM30 or through a upload program then same entry XYZ should be entered in ECC table the moment I save the entry in CRM table.
Please let me know the possible ways to achiev this. Its a bit urgent for me.
Thanks in Advance...
Sachin

Hi Sumit,
Thanks for your valuable inputs.
Actually we are accessing an Application Type CONTDURA in our IPC User Exit, we have overrided the
overwriteScaleBase method of ScaleBaseFormulaAdapter class.
in the mentioned method we are getting the value of CONTDURA application type like this.
also as you mentioned we have already populated this attribute in BADI CRM_COND_COM_BADI.
public BigDecimal overwriteScaleBase(IPricingItemUserExit prItem, IPricingConditionUserExit prCond, IGroupConditionUserExit groupCondition)
        String contractDuration = prItem.getAttributeValue("CONTDURA");
        if(contractDuration != null && !contractDuration.equals(""))
            return new BigDecimal(contractDuration.trim());
        else
            return null;
While debugging we found out that instead of CONTACT DURATION, blank String is returned.
Any idea whats going wrong here or what will be missing from coding as well as configuration side.
Thanks,
Siddharth
Edited by: Siddharth Jain on Mar 20, 2009 12:12 PM

Similar Messages

How to create ECC Quotation from CRM Opportunity?

Hi Experts,
Here I am getting an error like "S::000" while creating ECC Quotation from CRM Opportunity. Here I am enclosing the screen shot, please give me the solution.
Regards
Kishor Kumar.

Hi Kishore,
Please check the below links, there are certain per-requisite steps which are needed for this to work.
https://help.sap.com/saphelp_crm60/helpdata/en/47/45839696581a41e10000000a1553f7/frameset.htm
https://help.sap.com/saphelp_crm60/helpdata/en/47/463fc2b61c1a41e10000000a1553f7/frameset.htm
You can also check the SAP Note : 1078575 - ERP sales transactions in SAP CRM for more details.
Hope this helps.
Regards,
Siraj

Meet a problem of data exchange for sale order from CRM to R3.

Dear Friends:
 I do the data exchange for sale oder from to R3 today , the problem's detail is as follows:
 When i save a sale order in CRM (Version is 5.0) . it can automatically generate a bdoc which bdoc type is BUS_TRANS_MSG. but the bdoc status alway is "Sent to receivers (not all have confirmed)". and the original order in CRM can not be change .it quote that "Document is being distributed - changes are not possible", so i check the order status analysis in detail .it presents two error messages ," Event 'BEFORE_CHANGE', attribute ' FINI': Error code for function module 'CRM_STATUS_BEFORE_COMPLETED_EC' , "Item is not yet completed in OLTP system". so i check the order in R/3 ,it has already been create and without any error messages.
 Would like to tell me how to solve it . thanks your any idear..

Hi Benjamin,
When performing uploads to R/3 from CRM there is a response from the OTLP system that is sent back to the CRM Middleware to confirm that the data records were received and processed correctly.
Here is a checklist you can run through to verfiy that the connections, systems and objects that are needed are all in place:
On R/3 system:
- Check R/3 outbound queue (transaction SMQ1) for any entries that are not reaching CRM.
- Check that all RFC destinations on R/3 are defined correctly and are pointing to CRM
- Check the CRMCONSUM table in R/3 to ensure CRM is registered as a consumer
- Check the CRMRFCPAR table in R/3 to ensure that order objects are valid for exchange between R/3 and CRM
- Check for any short dumps in R/3 (ST22/ST21)
On CRM:
- Are there entries stuck in the inbound queue (SMQ2) with R3AU* names?
- What does the CRM Middleware Trace show (SMWT)? Sometimes this has more detail than the specific BDoc overview (SMW01)
- Check for short dums in CRM (ST22)
Let us know what else you uncover and we can work from there.
Brad

Unable to access ECC transactions from CRM using Transaction Launcher

Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
3)     Is there any other issue and need development specifically related BOR TSTC?
Warm regards and thanks in advance for your time.
Prasad

Hello JC,
Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
Transaction Launcher
Regards,
Ashik

Send data to ECC table through RFC Call function from SAP B1 via b1if

Hi,
I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
Thanks

Solved by my own.

Company code data for custom replicated from CRM

Hi,
I am trying to default the company code data for a BP replicated from CRM as a customer but it is not working.
How should this be done in CRM 7.0, ECC 6.
I am have so far copied function module SAMPLE_INTERFACE_DE_BALE, added my own code and created the entry in table TBE34. But it doesn't work. Is this correct or is there another method?
regards
Tim

This is what we did wen we had a similar requirement...
u2022     In the ECC create a FM u2018Z_USER_EXIT_BEFORE_SEND_TO_MWu2019.
u2022     Register this function module for the CRM0_200 exit user in the ERP system.
a.     Use Transaction SM30, table TPS34, to go to the maintenance of the modules. Here, enter the Z_USER_EXIT_BEFORE_SEND_TO_MWu2019 module for the CRM0_200 process.
b.     Use Transaction SM30, table TBE24, to check whether the application you have selected (Product column in TPS34) is active.
u2022     The FM will be triggered whenever a Sold gets successfully replicated from CRM to ECC system.
a.     Check for the Object Class u2018BUPAu2019.
b.     Check for the Object Name u2018CUSTOMER_MAINu2019.
c.     If yes copy the BP GUID from the BAPIMTCS Structure.
d.     Now call rfc FM ZLSD_BP_EXTRACT_FRM_GUID in CRM to get the BP number and Acc Group for the respective GUID.
e.     Check if the ACC GRP is Z001.
f.     If yes make a BDC call to transaction FD01 and update the Company Code data u2026. Recon. Account     110000
                             Terms Of Payment ZN30
                           for the respective BP
Note: we have recorded a BDC program to create the company code data.
regards,
Sameer Ahamad

Creation of ECC Quote automatically from CRM 7.0 Opportunity

Dear Experts,
I have a unique requuirement of my customer, they want to trigger ECC quote from Crm Opportunity automatically once the status is changed to Create Quote. I have already maintained the neccesssary settings to create ECc quote from Opportunity as a follow up document, but the customer wants it be done automatically. Please guide whether and how it is possible?
Thanks,
Ajai

Hi Ajai,
We can create this using Sales Profile & manually the Sales Guy can create ERP Quotation from CRM opportunity.
Actually I am going to create tge whole process to crate ERP Quotation from CRM Opportunity & not able to see the follow-up ERP Quotation Transactions under CRM Opportunity.
Can u pls help me if u have already created this ?
I got very good link for reference from SAP as below : but still for me its not showing the follow up docs..
http://help.sap.com/saphelp_crm60/helpdata/en/47/45839696581a41e10000000a1553f7/content.htm
Thanks
Umesh.

How to update a Z-table in ECC for the data coming from CRM

Hi Experts,
I need to store the industry code and description from customer master from CRM into a Z-table in ECC.I have checked the BDOC segments is already there in CRM.This Z-table has to be updated each time when the user save the customer master.This Z-table will be non editable in ECC.
Thanks in advance.
Regards,
Sumit

Hello,
Do you synchronize CRM business partner with ECC business partner?
Because in standard industry code & description are replicated between both objects... so I don't really understand what you try to do.
Anyway, if you would like to save some information in a Z table each time a business partner gets replicated into ECC, you can register a function module in table COM_BUPA_CALL_FU on ECC to do the job.
Kind regards,
Nicolas Busson.

Extracting data from ECC tables in BODS

Hello all,
I'm trying to extract data from ECC tables. I have created a data store and imported the necessary tables(FAGLFLEXT) that i will be using. I have used the table in a job as a source and tried to execute the job but i was only able to extract 28 records from the extractor when there are many more records present in the table and also when i view the data in BODS i can only see 28 records.
Plz help me in resolving this. How to extract the whole data?
Thanks in advance.

The table layouts can be found in the [documentation for EPMA|http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip] . If this doesn't work, there are other options to export hierarchies to text files. You can use life cycle management or the [EPMA File Generator|http://docs.oracle.com/cd/E17236_01/epm.1112/epma_file_gen_user/launch.html].
Kyle Goodfriend
http://www.in2hyperion.com
Please make sure you assign your post as answered when an appropriate answer is provided (or helpful when applicable) so others benefit.

How to retrive archived data from ECC table

Hi,
I need extract the data from archived ECC tables to BW.
How can I know that which tables the archived data has been stored in ECC ?
Thanks for your help in advance.
Raj.

Hi Sreenivas,
I know the t-code SARA using we can pull the data. Please let me know by the steps how to pull the archived data in to the data source.
Do I need to create any generic data source or we can pull the data into existing data source.
Please let me know by steps or if you have any document link?
Thanks,
Raj.

Replication of Z table from CRM to R/3 - No mBDoc Created

I need to transfer the contents of a bespoke customer table from CRM into R/3, off the back of delta changes being made to the CRM table. To help us to achieve this we have performed the following steps so far:
1. Created the customer table in both systems.
2. Created a new messaging BDoc in CRM and linked it to the R/3 Site Type.
3. Created a new mapping module in CRM that takes the data from the BDoc and maps it to the BAPI structure.
4. Created a new Adapter Object that links to my BDoc, contains the new customer table as the source table in CRM and contains the mapping Module mentioned above.
5. Created a new Replication Object based on my new BDoc.
6. Created a new Publication and assigned it to the Replication Object.
7. Created a new Subscription and assigned to the Publication and Replication Object. Also assigned it to my R/3 site.
On the R/3 side we have created a mapping module to map the data from the BAPI structure into the equivalent R/3 table. We also have an entry in table CRMSUBTAB.
However when I insert an entry in the customer table in CRM no BDoc is being created. In fact I cannot see anything at all in the system that indicates that it has even tried to capture the change and invoke the Middleware process.
What am I doing wrong?
Do I need anything else (some sort of delta program?) that picks up the parameters from the table update and feed them into my process? The literature that I have found (and it is not much) does not mention anything like this though.
Any help would be greatly appreciated as this is now a very urgent requirement.
Regards
Ian
Edited by: IAN HAWLEY on Aug 21, 2008 9:42 AM

Ian,
I do expected the follow up questions. Check my explanation below and hope it will answer your queries:
1. I assume all of the activities performed to date are still valid to supplement your solution, e.g. the BDoc, Replication Object, Publication and Subscription details?
2. The R/3 to CRM Mapping Module. Is this required to allow messages to be sent back from R/3 to update the BDoc, e.g. a sort of validation to prove that the posting has completed ok?
FM ZMAP_BAPIMTCS_TO_MBDOC in CRM, to map the BAPIMTCS format data and build the BDoc. This BAPIMTCS format is a temporary one and is not the final data format, that is taken to ECC. This function module also takes care of receiving the response message from ECC, once the BDoc data reaches and updates in ECC. If there is any error occured during the updation, it is captured in the error table of the BDoc and the status of BDoc is set to 'Error'. If no error occurs, the status of BDoc is set to 'Confirmed'.
3. The Extractor Module in CRM. Does this get the data out of the table and will it work for deltas?
Yes , It should work for Delta too.The delta load makes use of the same program and flow for Initial load (SMOF_DOWNLOAD)
4. CRMSUBTAB in CRM. I knew that we populated this in R/3, I did not realise we would need it in CRM as I assumed it was R/3 specific.
5. You list the sequences of FM calls at the end. I was confused in the order. As we are initiating data to be sent from CRM to R/3 should some of these be in the reverse order, e.g. ZMAP_MBDOC_TO BAPIMTCS would be called before ZMAPBAPIMTCS_TO_MBOC as would pass data into the BDoc to send it to R/3 before we then received an update message back?
Step 1: Z_EXTRACT_MODULE will be called.( It calles ZPICK_DATA_FROM_CRM). This function module calls the standard function module CRS_SEND_TO_SERVER the one triggers the other function modules
Setp 2: Creat function module ZDATA_TO_BAPIMTCS(missed to mention earlier) in CRM, to map the data in the final internal table to BAPIMTCS format. This format is temporary and will be used to build the BDoc data.
Step 3: Created function module ZMAP_BAPIMTCS_TO_MBDOC in CRM, to map the BAPIMTCS format data and build the BDoc. This BAPIMTCS format is a temporary one and is not the final data format, that is taken to ECC. This function module also takes care of receiving the response message from ECC, once the BDoc data reaches and updates in ECC. If there is any error occured during the updation, it is captured in the error table of the BDoc and the status of BDoc is set to 'Error'. If no error occurs, the status of BDoc is set to 'Confirmed'
Step 4: Created function module ZMAP_MBDOC_TO_BAPIMTCS in CRM, to build the final BAPIMTCS structure from the BDOC. This BAPIMTCS is the final data structure that goes to ECC. The table name, objectkey, relkey that is relevant for the BAPIMTCS, is filled in this function module..
Step 5: Created function module Z_LOAD_PROXY_FINAL in ECC, to receive the data from CRM. The BAPIMTCS data is received and mapped to local internal tables and then updates to custom tables through the function module Z_UPDATE_ECC. The errors if any are captured in this function module and returned back to CRM using the standard function module CRS_SEND_TO_SERVER.
To reduce the load on the interface, at the final stage, it was decided to fetch the data completely in ECC. So the incoming data from CRM is ignored and is fetched completely from ECC tables.
6. Is there a test FM available for the extract, e.g. is CRM_SAMPLE_EXTRACT_MODULE the one to copy?
No, You have to develop this Extractor FM say ZPICK_DATA_FROM_CRM and should be called in Z_EXTRACT_MODULE.
Apologize for any spelling errors, as I too running to meeting.
Update me the status.
Bobby
Edited by: Bobby on Aug 22, 2008 2:13 PM

RFC is to be created in ECC that should fetch the data from CRM

Hi Gurus,
I am facing with a problem in knowing the fields and table to develop an RFC in ABAP.
My exact requirement is :
ABAP : the field PERNR is passed as exporting parameter to RFC and imporitng paramter is an internal table that consists of   PERNR and overpayment status field.
         ABAP                                                                             CRM
Exporting Parameter = PERNR                                  Importing Parameter= ? " Which field should i take as importing field"
Importing Parameter = LT_ITAB                                Exporting Parameter= ? " internal table consisting input field and
overpayment status field "
NOTE : In order to provide a means of progressing overpayments and to provide a statistical analysis of overpayments, RFC is required that combines the information in CRM with that in ECC6 for overpayment details.
Pls Can u Help me by providing table and field name in CRM
Thanks,
Reddy..

Hi Kalpana,
if you want to fetch ecc data to crm you have to create one rfc enabled function module in ecc use that function module in crm.
calling a smart form is different scenario go through this links you can get to know how to call..
**************** - Calling an RFC function module from one system to another
Print an Adobe Form from CRM Web UI - CRM - SCN Wiki
Call a Smartform in webUi
example:
sample code:
clear lv_client.
IF sy-mandt = '110'.
     CONCATENATE 'ECDCLNT' sy-mandt INTO lv_client.
   ELSEIF sy-mandt = '200'.
     CONCATENATE 'ECQCLNT' sy-mandt INTO lv_client.
   ELSEIF sy-mandt = '300'.
     CONCATENATE 'ECPCLNT' sy-mandt INTO lv_client.
endif.
call function 'zfunction_module' destination lv_client
exporting
is_date = lv_date
tables
ot_tab = ot_tab.
Thanks & Regards,
Srinivask

Which ECC table stores shipment # condition type level data?

Hi all:
Here I have a requirement to get freight data at condition type level for each shipment number.
Does anybody know which ECC table/field maintain such data?
Any post would be appreciated and thank you all in advance!
Tim

hi,
this is to infrom you that,
please try these tables:
Tables for Shipping/Delivery document
VTTK : SD Doc: Shipment Header
VTTP - TKNUM: SD Doc : Shipment Item
please check and confirm
i have checked from my end.
regards,
balajia
Edited by: balaji timmampalli achari on Nov 24, 2010 8:17 AM

Error while connecting to ECC tables from Crystal

Hello,
I am trying to create a crystal report on the SAP ECC tables directly, when I try to create a new connection from u201CSAP Table, Cluster, or Functionu201D option in crystal reports 2008 I get this error" Logon Failed. Details: you don't have necessary rights to design reports against the SAP system. please contact your administrator"
Now my question is where are my rights missing, is it on BO side or SAP side, I see that I have access to SAP tables when I try to logon through the SAP logon pad it works, I could see the tables.
Please let me know your thoughts.
Thanks

Hi,
part of the ABAP Transports from the SAP Integration Kit are also specific authorization objects. Take a look at the Installation guide for the SAP Integration Kit in the appendix.
Ingo

How to read internal table data and use to retrive from other table.

Hi all,
 I am trying to generate a report using ooabap.
In this scenario, I retrieved data from one standard table (zcust) and successfully displayed using structure 'i_zcust_final' ( i_zcust_final is similar structure of zcust).
 Now I want to get some other data from other standard table (zpurch) using the data in i_zcust_final. How....???? I am unable to read data from i_zcust_final even i kept in loop.
 I am attaching the code here.. even it too long, please look at the code and suggest me what to do.
code **************************
REPORT ZBAT_OOPS_REPORT1.
TABLES: ZCUST.
 D E F I N I T I O N *****
CLASS BATLANKI_CLS DEFINITION.
PUBLIC SECTION.
DATA : ITAB_ZCUST TYPE STANDARD TABLE OF ZCUST,
 I_ZCUST_FINAL LIKE LINE OF ITAB_ZCUST,
 ITAB_ZCUST1 TYPE STANDARD TABLE OF ZCUST.
TYPES: BEGIN OF IT_ZPURCH,
 CUSTNUM TYPE ZPURCH-CUSTNUM,
 PURC_DOC TYPE ZPURCH-PURC_DOC,
 VENDOR TYPE ZPURCH-VENDOR,
 STATUS TYPE ZPURCH-STATUS,
 PURC_ORG TYPE ZPURCH-PURC_ORG,
 END OF IT_ZPURCH.
DATA : ITAB_ZPURCH TYPE TABLE OF IT_ZPURCH,
 I_ZPURCH_FINAL LIKE LINE OF ITAB_ZPURCH.
METHODS: GET_ZCUST,
 PRINT_ZCUST,
 GET_ZPURCH.
ENDCLASS.
I N I T I A L I Z T I O N *****
 SELECT-OPTIONS:S_CUSNUM FOR ZCUST-CUSTNUM.
INITIALIZATION.
S_CUSNUM-LOW = '0100'.
S_CUSNUM-HIGH = '9999'.
S_CUSNUM-OPTION = 'BT'.
S_CUSNUM-SIGN = 'I'.
APPEND S_CUSNUM.
CLEAR S_CUSNUM.
I M P L E M E N T A T I O N *****
CLASS BATLANKI_CLS IMPLEMENTATION.
METHOD GET_ZCUST.
SELECT * FROM ZCUST
 INTO TABLE ITAB_ZCUST
 WHERE CUSTNUM IN S_CUSNUM.
ENDMETHOD.
METHOD PRINT_ZCUST.
 LOOP AT ITAB_ZCUST INTO I_ZCUST_FINAL.
 WRITE:/ I_ZCUST_FINAL-CUSTNUM,
 I_ZCUST_FINAL-CUSTNAME,
 I_ZCUST_FINAL-CITY,
 I_ZCUST_FINAL-EMAIL.
 ENDLOOP.
ENDMETHOD.
 METHOD GET_ZPURCH.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
SELECT CUSTNUM
 PURC_DOC
 VENDOR
 STATUS
 PURC_ORG
 FROM ZPURCH
 INTO CORRESPONDING FIELDS OF TABLE ITAB_ZPURCH
 WHERE CUSTNUM EQ I_ZCUST_FINAL-CUSTNUM.
ENDLOOP.
 LOOP AT ITAB_ZPURCH INTO I_ZPURCH_FINAL.
 WRITE:/ I_ZPURCH_FINAL-CUSTNUM,
 I_ZPURCH_FINAL-PURC_DOC,
 I_ZPURCH_FINAL-VENDOR,
 I_ZPURCH_FINAL-STATUS,
 I_ZPURCH_FINAL-PURC_ORG.
 ENDLOOP.
ENDMETHOD.
ENDCLASS.
O B J E C T *****
DATA: BATLANKI_OBJ TYPE REF TO BATLANKI_CLS.
START-OF-SELECTION.
CREATE OBJECT BATLANKI_OBJ.
CALL METHOD:
 BATLANKI_OBJ->GET_ZCUST,
 BATLANKI_OBJ->PRINT_ZCUST,
 BATLANKI_OBJ->GET_ZPURCH.
Can anyone suggest me..
Thanks in advance,
Surender.

Hi Surendar..
There is mistake in the Work area specification in this method.
METHOD GET_ZPURCH.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO CORRESPONDING FIELDS OF TABLE ITAB_ZPURCH
WHERE CUSTNUM EQ ITAB_ZCUST1-CUSTNUM.
 "Instead of I_ZCUST_FINAL-CUSTNUM.
ENDLOOP.
LOOP AT ITAB_ZPURCH INTO I_ZPURCH_FINAL.
WRITE:/ I_ZPURCH_FINAL-CUSTNUM,
I_ZPURCH_FINAL-PURC_DOC,
I_ZPURCH_FINAL-VENDOR,
I_ZPURCH_FINAL-STATUS,
I_ZPURCH_FINAL-PURC_ORG.
ENDLOOP.
ENDMETHOD.
Now it should work..
One more thing : From performance point of view you have to Replace that loop using FOR ALL ENTRIES . And avoid CORRESPONDING FIELDS. it will be slow.
This is the code.
LOOP AT ITAB_ZCUST INTO ITAB_ZCUST1.
if ITAB_ZCUST[] IS NOT INITIAL.
SELECT CUSTNUM
PURC_DOC
VENDOR
STATUS
PURC_ORG
FROM ZPURCH
INTO TABLE ITAB_ZPURCH
for all entries in ITAB_ZCUST1
WHERE CUSTNUM EQ ITAB_ZCUST1-CUSTNUM.
 "Instead of I_ZCUST_FINAL-CUSTNUM.
ENDIF.
ENDLOOP.
Reward if Helpful.

Data Reflection in ECC table from CRM table

Similar Messages

Maybe you are looking for