Data refresh activity

Hi,
Can any one help me out to check when was the last  datarefresh activity was done  to a system for eg to xxx system client 210.
Thanks in advance,
Regards,
Veena BJ
Edited by: Veena B.J on Mar 10, 2010 10:36 AM

Hi,
You can check SCC3 logs (Client Copy/Transport Logs) for all clients in your xxx system.
Regards,
Bhavik G. Shroff

Similar Messages

  • External Data Refresh Failed. We cannot locate a server to load the workbook Data Model. ThisWorkBookDataModel

    Hi All,
    I have been trying to fix this for days now. I have tried solutions in many articles but to no avail. So while the error message is something you may have seen may times, I just can't find a solution in my case.
    This is the error:
    And in text just in case the image isn't viewable:
    "External Data Refresh Failed. We cannot locate a server to load the workbook Data Model. We were unable to refresh one or more data connections in this workbook. The following connections failed to refresh: ThisWorkBookDataModel."
    What is worse is I have checked the ULS (SharePoint Trace Logs), the Event Viewer Logs and the OWA Logs and I cannot find a specific error that would help pin point the problem.
    Excel Workbook
    So what am I doing? I have an Excel 2013 workbook and I create an "SQL Server" connection to the AdventureWorksDW database, add a pivot table and a pivot chart, test in in Excel and all works fine.
    I save the Excel workbook to SharePoint 2013 and then select "Data" then "Refresh All Connections" and then I get the error in the picture above.
    Even more puzzling is I have another Excel workbook that also has pivot tables and pivot charts in the AdventureWorksDW2012Multidimensional cube database in "SQL Analysis Services" and this works fine. Hmmm.
    My Environment
    My environment is Windows 2008 R2 Server, SharePoint 2013 with the April Service Pack1 and a separate server with OWA2013 SP1. It has an SQL Server 2008 R2 database which has been upgraded to SQL Server 2012.
    Data Model Settings
    In Excel Services this is set to my server name which is "server-name". As I do not have instances all I can enter is the server name. As this works everywhere else including the workbook outside of SharePoint I do not think this is the problem.
    But I could be wrong.
    Unattended Account
    I have set this up for the PowerPivot Services App and Excel Services App.
    ODC Connections in Excel
    I have tried all 3 authentication modes, Windows, Secure Store ID and "None" which is the unattended account. I have not tried the other connection types, should I?
    Not in WOPI
    I am not in WOPI mode.
    AD Accounts
    I have added permissions in the SharePoint Services and SQL Server, and as they work in Excel outside of SharePoint, I do not think it is a permissions issue. I could be wrong of course, but the problem is in one of SharePoint, OWA, AD,
    SQL Server, Excel, and Windows Server.
    Isolate the Error
    Below is a list of errors I think are relevant but they do not tell me much. The SharePoint logs are not really giving me an error that tells me what to do and where to do it, or even why it cannot refresh, (perhaps not noticeable by the untrained eye).
    Problem with SQL Server Not Analysis Services
    So my cube database in analysis services works fine in SharePoint/OWA but not the databases in sql server. This is my best clue but I have no idea what it means. Why would it work with an Analysis Services connection but not an "SQL Server" connection?
    It Works Outside of SharePoint
    If I run the excel worksheet outside of SharePoint all works fine. When inside OWA this is where the refresh error occurs.
    Errors from Event Viewer on SharePoint Server using ULS Viewer
    "Failed to create an external connection or execute a query. Provider message: There are no servers available or actively being initialized., ConnectionName: , Workbook:"
    "Refresh failed for 'ThisWorkbookDataModel' in the workbook 'http://server...'. [Session: 1.V22.26itT0lx8piNFeqtuGVhN214.5.en-US5.en-US36.98c0e158-9113-46e9-850e-edda81d9ed1c1.A1.N User: 0#.w|ad\testuser1]"
    And an error in the ULS under the "Data Model" category:
    "--> Check Deployment Mode (server-name): Fail (Expected: SharePoint, Actual: Multidimensional)."
    This last error, as it turned out, defined the problem concisely, although I was yet to work out what it meant in some detail.

    I finally solved this myself (or should I say with the help of several key articles).
    The refresh did not work because the database was not in "SharePoint Mode". Yes, SQL Server has modes, 3 of them in fact.
    If you installed SharePoint to the default SQL instance which would be called <servername> then you cannot use this default instance for Excel 2013 workbooks in OWA 2013 because the refresh only works if the database is in SharePoint mode.
    So what are these 3 modes? The Deployment Mode property in the msmdsrv.ini file has them as:
    0 = Multidimensional mode (the default whenever you install SQL Server normally)
    1 = PowerPivot for SharePoint mode
    2 = Tabular mode mode
    How do you know what mode you are in? That's easy, open SQL Studio Manager and connect to all your SQL database engine instances (ignore Analysis Services or SSRS as they are not database engines). If you only have the default instance then that is almost
    definately in Multidimensional mode which is the default and what SharePoint installs its databases to.
    You must have an instance called <servername>\POWERPIVOT. This instance is the "sharepoint mode" needed, and the default instance name when you install an SQL instance in this mode.
    If you don't see <servername>\POWERPIVOT in SQL server then you are not in "sharepoint mode". It is more accurate to say, you do not have an instance that is in sharepoint mode. This is because you cannot simply switch modes on an SQL server.
    You have to install a new instance in the required mode, thats the only way.
    That's easy enough. Load up the SQL Server setup CD and run setup. Install a brand new instance and select "SQL Server PowerPivot for SharePoint" when you get there in the wizard.
    Now you will have the default instance that stores all the SharePoint databases and that is in mode 0, and a new instance called <servername>\POWERPIVOT that is in mode 1. The "<servername>\POWERPIVOT" instance connection is what you
    will use for Excel 2013 when rendering in OWA 2013.
    You also need to ensure OWA 2013 is not in WOPI mode for Excel worksheets. See the last link below for more information about WOPI.
    Next you should go to the Excel Service App in CA and click Data Model Settings and add the <servername>\POWERPIVOT instance.
    Then you have to either turn off the firewall on the SQL server machine, or create an inbound rule on the Windows firewall to open the TCP port for the <servername>\POWERPIVOT instance:
    1. Start Task Manager and then click Services to get the PID of the MSOLAP$InstanceName.
    2. Run netstat –ao –p TCP from the command line to view the TCP port information for that PID.
    Finally, you can now create Excel 2013 workbooks that run in OWA without refresh errors, as long as you are connecting to the <servername>\POWERPIVOT instance. Hooray.
    REFERENCES
    Look for the string "There are no servers available or actively being initialized" in this article:
    http://blogs.msdn.com/b/analysisservices/archive/2012/08/02/verifying-the-excel-services-configuration-for-powerpivot-in-sharepoint-2013.aspx
    Determine the server mode:
    http://msdn.microsoft.com/en-au/library/gg471594(v=sql.110).aspx
    Install the SharePoint PowerPivot instance (aka SharePoint mode)
    http://msdn.microsoft.com/en-au/library/eec38696-5e26-46fa-bc83-aa776f470ce8(v=sql.110)
    Open the port for the new SQL instance:
    http://msdn.microsoft.com/en-us/library/ms174937(v=sql.110).aspx
    Turn Off WOPI for Excel OWA
    http://blogs.technet.com/b/excel_services__powerpivot_for_sharepoint_support_blog/archive/2013/01/31/powerpivot-for-sharepoint-browser-refresh-fails-data-refresh-not-supported-in-office-web-apps.aspx

  • Schema Refresh activity

    Hi Gurus,
    I am doing a schema refresh activity from Production db to Test db.
    In PRODUCTION, I have a schema called LMS which has default tablespace as LMS and temporary TEMP.
    In TEST schema is LMSTEST and it;s default tablespace and temporary tablespace is LMSTEST and TEMP respectively.
    But;there is also a tablespace called LMS in TEST database.
    I have dropped the user from TEST
    created a user with same name
    given default and temporary tablespace as LMSTEST and TEMP
    given default roles to that users
    given system privileges as well...
    My poblem is while importing,my data is getting inserted into LMS where as it should go in LMSTEST as i made it default tablespace. Why it has happpened?????
    I have also made quota zero on LMS in TEST database ,but still the data is getting inserted into LMS in tablespace and not in LMSTEST tablespace.....
    Edited by: user13299764 on Aug 4, 2010 2:51 AM

    In export/import utility the data to the target database goes to the same tablespace while doing import as it was in the source database tablespace.In your case LMS tablespace.so follow the below steps.
    1.Either assign LMS as default tablespace to LMSTEST user.
    or
    2.After the import is over move all tables to the LMSTEST tablespace and rebuild the index on LMSTEST tablespace.
    or
    3.Take export using datapump and while import use remap_tablespace option.

  • Problem in Activating from  New data to Active data in DSO

    Hi All,
    For   my DSO I am fetcdhing some fields from other DSO table ,    through END Routine ,. After  running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
    After Activating the New data table to Active data table I cant able to see my data.
    ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
    it shows ready for reporting.
    Please help me on this................................

    Hi ,
    After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be  because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
    Srikanth.

  • EvDRE: Refresh Active Sheet (for VBA)

    Is there a routine I can use that's the equivalent to:
    Right-click, EVDRE: Exand & Refresh...Active Sheet
    I'm aware of the VBA routines like MNU_eTOOLS_EXPANDANDREFRESH and MNU_eTOOLS_EXPAND, and MNU_eTOOLS_REFRESH---but did not find any documentation on this calling this.
    Edited by: Allison Jones on Mar 17, 2008 8:50 PM

    Those may be internal calls to the addin that are accidently exposed.  You should not call anything that isn't documented.  All the MNU commands are documented in the eTools help file I referenced earlier.  Choose, [eTools] > [BPC for Office help] then search on [MNU] and choose [BPC menu commands].
    You can either assign the macro to a form button or call them in a VBA routine as Joost mentioned.  If the goal is to just call the macro, the button works fine.  The only reason to call them from VBA is if you need to string together multiple operations in a single process.  Then you'd write your own macro and assign it to a button.
    The function that is equal to Expand and refresh on a report template would be MNU_ETOOLS_EXPANDANDREFRESH.  This does both an expand of dynamic members and a data refresh.  If you just need to update the data, MNU_ETOOLS_REFRESH is all that's needed.

  • Number of users logged in during cube refresh activity

    I am using Hyperion 11.1.2.1 and running  Planning cube refresh activity using \Hyperion\Planning\bin\CubeRefresh.cmd.
    Is there any way to find out total number of users logged in into a particular Planning Application during Cube refresh activity running for that application ?

    I don't think Planning repository has information about sessions.
    Let us know if you succeed.
    I was not talking about Essbase as in "Essbase", all users that are performing an activity in Planning (data refresh, data load, run business rule) will show up in EAS sessions so if you run the maxl display session against Planning application it'll give you all users.
    Now OP, you can perform a search for "line count windows cmd" will give you ideas on how to count the lines and that count is going to be the numbers of users (well it is not the number of users, but number of sessions)
    ORA-00001: Unique constraint violated: Count lines in multiple files using Windows command prompt
    Regards
    Celvin

  • DSO upload and no data in Active data table

    Hi Experts,
    I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
    Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
    Pls advise.
    Tati

    Hi,
    I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
    If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
    Thanks,
    Naren

  • Excel Services 2013 Bug - Automatic or Periodic Data Refreshes Doesnt Update

    All,
    I have heard from other colleagues that there is a problem with SP2013 Excel Services Automatic Refresh.  Specifically, when you set the data connection properties to
    Refresh data when opening a file, no error is generated upon open, but it DOES NOT refresh the spreadsheet with new data.
    Manual Refresh First.  What I did to test this was configure an AS tabular model with AdventureWorksDW as the data source.  Loaded the AdventureWorks Tabular project.  Created an ODC pointing to the resulting cube instance.
    (Made all of the required Excel Services configurations.) Then pointed a workbook to this data source to populate a Pivot Table.  Saved it to SharePoint in a trusted location.  ODC saved to SharePoint in a trusted data connection library.  Finally,
    I configured the connection properties to NOT Refresh data when opening the file.  Saved it.  Go to my in browser Excel Services file, and click
    Data | Refresh All Connections.  WORKS!  Great. 
    Next up: Automatic Data Refresh.  I made a copy of the same workbook.  Connected to the same data connection file.  Went into the properties of the connection on the copied workbook and checked
    Refresh data when opening the file.  Saved.  Updated relational data in database.  Reprocessed the tabular model.  Re-opened the Automatic refresh workbook.  Numbers stay the same.
    I've tried also setting Refresh every setting on
    Usage tab of Connection Properties dialog to low number.  No change.  Tried reducing the Excel Services External Data Cache Lifetime auto refresh setting to 10 seconds.  Nothing, no change.  Nothing seems to work to get Auto refresh
    working.  Manual refresh works great.  Has anyone else seen this bug?  Is there a hot fix?  Anyone know if there is something else to try?
    UPDATE: In the ULS log, what we see if the following line:
    BaseWorkbook.PrepareConnectionsAsync: Refresh skipped. Could not find the data connection name - defaulting to previous state. sessionId=..., dataconnection=
    Note: the dataconnection value at the end is empty.

    Hi,
    Thank you for your question. I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience. Thank you for your understanding and support.
    Thanks,
    Linda Li
    Linda Li
    TechNet Community Support

  • How scheduling the data refresh for a published Excel workbook - SharePoint 2013

    Hi,
    I've implemented an Excel workbook that connects to a SSAS Tabular data source and I've published it on SharePoint.
    Now, how can I implement a scheduled data refresh if it is possible?
    Thanks

    Hi pscorca,
    If  my understanding is correct , you want to implement a scheduled data refresh on SharePoint 2013 and the data is from a SSAS Tabular data source.
    Below are some articles for you to take a look:
    Data Sources Supported (SSAS Tabular)
    http://technet.microsoft.com/en-us/library/gg492165.aspx
    Get data from Analysis Services
    http://office.microsoft.com/en-in/excel-help/get-data-from-analysis-services-HA102837073.aspx
    PowerPivot Data Refresh with SharePoint 2013 and SQL Server 2012 SP1 (Analysis Services)
    http://technet.microsoft.com/en-us/library/jj879294.aspx
    Refreshing PowerPivot Data in SharePoint 2013
    http://blogs.msdn.com/b/analysisservices/archive/2012/12/21/refreshing-powerpivot-data-in-sharepoint-2013.aspx
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Data Refresh Error: We cannot locate a server to load the workbook Data Model.

    Hello,
    Recently I have developed a PowerBI Report using Excel Workbook with external data source. It refreshes successfully for some days and then starts throwing error on every scheduled refresh as "We cannot locate a server to load the workbook Data
    Model." 
    The workaround solution is to restart the application server which has SQL Server Power Pivot Services Installed which will again work for some more days and again start throwing error.
    So, I am looking for permanent fix for it.
    Following are additional details about our SP Farm:
    No. of front end servers: 2, Application servers:2, DB servers 2 with windows fail over cluster.
    PowerPivot Server is installed and configured from App 2 server.
    Error Log from event viewer:
    Unable to load custom data source provider type: Microsoft.PerformancePoint.Scorecards.DataSourceProviders.AdomdDataSourceProvider, Microsoft.PerformancePoint.Scorecards.DataSourceProviders.Standard, Version=15.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c
    System.IO.FileNotFoundException: Could not load file or assembly 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified.
    File name: 'Microsoft.AnalysisServices.AdomdClient, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91'
       at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMarkHandle stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName, ObjectHandleOnStack type)
       at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean loadTypeFromPartialName)
       at System.Type.GetType(String typeName, Boolean throwOnError)
       at Microsoft.PerformancePoint.Scorecards.Server.PmServer.InitializeCustomDataSourceProviders()
    PerformancePoint Services error code 10107.
    Thanks,
    Ibrahim

    Hi ibrahim,
    Please try to do the following steps:
    1. Install "1033\x64\SQLSERVER2008_ASADOMD10.msi" from
    http://www.microsoft.com/en-us/download/details.aspx?id=26728
    2. In the Application Management section of the Central Administration home page, click Manage service applications.
    On the Manage Service Applications page, click the Excel Services service application that you want to configure.
    On the Manage Excel Services page, click Data Model.Click Add Server.
    In the Server Name box, type the name of the Analysis Services instance that you want to add.
    3. Check the thread below:
    https://social.technet.microsoft.com/Forums/en-US/ecc18319-88d8-4dd0-bafd-fa0d2edceffb/external-data-refresh-failed-we-cannot-locate-a-server-to-load-the-workbook-data-model?forum=sharepointadmin
    More information:
    https://timpanariuovidiu.wordpress.com/2013/02/14/71/
    https://support.microsoft.com/kb/2769345?wa=wsignin1.0
    Thanks,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Dennis Guo
    TechNet Community Support

  • Data refresh of Excel file on Sharepoint 2013 Online (E3)

    Is it possible to refresh data in an Excel PowerPivot model from external data (SQL Server 2012) on the
    SharePoint 2013 Online solution that comes with the Office365 E3 plan?
    I need to either have the Excel file itself on the public facing website with data refresh there, or possibly have the Excel file in a private Business Intelligence Center subsite and then publish webparts or whatever on the public site, as long as the charts
    are refreshed and publicly viewable. I've found a lot of conflicting info on this.
    Re
    D

    Currently, when a workbook that contains a Data Model is published to a library in Office 365, data refresh is unavailable.
    However, you can use a PowerShell script to configure a workaround.
    donwload this white paper for workaround:
    http://technet.microsoft.com/en-us/library/jj992650.aspx
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Data refresh in background for an Excel workbook published on a SharePoint 2013 site

    Hi,
    I've created a site to publish some Excel workbooks on a SharePoint 2013 farm with Excel Services.
    I'd like to run in background the data refresh against the cube connected to Excel, so when the end user will open the workbook he already will see the updated data without any waiting times.
    How can I solve this issue, please?
    Keep attention: I don't talk about PowerPivot for SharePoint.
    Thanks

    did you try to use the
    unattended service account for authentication to external data, in order to refresh the excel data?
    Check this technet: http://technet.microsoft.com/en-us/library/hh525344.aspx
    more options over here:
    http://technet.microsoft.com/en-us/library/ff191191.aspx
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Power Query/Data Management Gateway data refresh not working

    Pretty new to o365/Power BI, but here's what I've got going on (hopefully someone can help me out):
    I created a data management gateway and data source.  The data source says it's online in the PowerBI admin center, and it seems to be working correctly.  I can open Excel 2013 on my desktop (logging in as my trial o365 account which has Power
    BI associated with it) and connect to the data source via Power Query using the oData option.  I make sure to import the data into the model, and then open up the PowerPivot window and create a simple pivot table using the data in the model.
    that all works just great.  The problem comes when I upload the workbook and try to update it.  I've tried a few different ways.
    1. When I try to manually refresh the workbook by opening it in my o365 site and going to data-->refresh I get the following error:
          An error occurred while working on the Data Model in the workbook. Please try again.
          We were unable to refresh one or more data connections in this workbook.
          The following connections failed to refresh:
          Connection: Power Query - dbo_DimProductCategory
          Error: Out of line object 'DataSource', referring to ID(s) 'a75593f3-c34d-4f83-9458-49aa2cece164', has been specified but has not been used.
          The following system error occurred: Class not registered
          The provider 'Microsoft.Mashup.OleDb.1' is not registered.
          Power Query - dbo_DimProductCategory
    2. When I go into Power BI and go to "Schedule Data Refresh" for the workbook, I get the following error:
          Sorry, the data connections in this report aren’t supported for Scheduled Refresh.
          Technical Details â–¼
          Correlation ID: B3CE4B10-2137-E593-6FCF-189B73465190
          Date and Time: 03/31/2014 06:20:39 PM (UTC)
    Any help would be greatly appreciated.  If you need additional information, I'd be happy to provide it.

    Hey Guy,
    Thanks for the reply.
    The "data source type" of the data source in Power BI is "SQL Server" (there was only that and Oracle available to select from)
    The "data source type" that Power Query is using in Excel is "From oData Feed"....which is using the Power BI data source....which is using the data management gateway.
    A few follow up questions if you have a second
    1. Do you know when PowerQuery data refresh will be supported? (just a general idea....weeks, months, next year?)
    2. Is there any other way to connect to (and be able to refresh) PowerBI data sources referencing "on prem" data via the data management gateway?  I tried using the oData feed URL in non-PowerQuery areas of excel (excel data tab, PowerPivot directly)
    but it didn't work.  If there's some other way to connect to and refresh on prem data, i'm all ears :D 
    Really appreciate your help, thanks for taking the time.

  • PowerPivot Data Refresh Fails - We cannot locate a server to load the workbook Data Model

    Hello,
    I have installed sql01\PowerPivot instance of Analysis services on my existing SQL Server and configured it per Configure Power Pivot for SharePoint 2013
    http://technet.microsoft.com/en-us/library/dn456880(v=office.15).aspx . I did not install a second Database Engine on the server.
    I created an Excel 2013 workbook using the Excel 2013 PowerPivot add-in and saved it to my SharePoint BI Center Document library.
    When I try to refresh my workbook, I get 2 errors in the SharePoint log.
    http://support.microsoft.com/kb/2756665?wa=wsignin1.0 indicates the sproc is deprecated, but that does not help me fix the issue.
    Log errors:
    Following error occured while trying to execute a sql query: System.Data.SqlClient.SqlException (0x80131904):
    Could not find stored procedure 'DataRefresh.GetSchedule'.
    EXCEPTION: NoAvailableStreamingServerException: We cannot locate a server to load the workbook Data Model.
    macrel

    Hi Marcel,
    Based on my research, it seems that you have Microsoft SQL Server 2012 PowerPivot for SharePoint 2013 add-in installed on a computer. When you perform a data refresh operation on some PowerPivot workbooks in Microsoft SharePoint 2013, you receive two error
    message.
    As to the first error, this issue occurs because the Custom Properties on the Excel workbook are not correctly cleared before you set a new serialized schedule. This causes an extra custom property to remain after you set the new schedule. Therefore, the
    new schedule fails. To fix this issue, please
    install Cumulative Update 9 for SQL Server 2012 SP1.
    As to the second error, please
    running a repair using PowerPivot configuration wizard for SharePoint 2013. For more information about Troubleshooting PowerPivot Data Refresh, please see: 
    http://social.technet.microsoft.com/wiki/contents/articles/troubleshooting-powerpivot-data-refresh.aspx
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Scheduled Data Refresh fails with 400 error

    I've setup a PowerPivot Model, connected 1.5 Million rows (57MB file) rendered the data in a powerpivot table and uploaded it to an PowerBI enabled BI site in O365.
    Report renders online
    Q&A works too
    Configured data management gateway
    Connected DMG to PowerBI
    Configure data source with the same Connection String
    Set credentials for data source with Status OK (only can do this step from a domain joined computer which I find odd)
    Enabled Data Refresh on the Report with status OK (i.e. it found the corresponding data connection on the gateway)
    Tried to manually refresh the data.... no luck. keeps on failing with the following error message
    Failure Correlation ID: c1dcf840-e0c8-45d6-9720-b4d2c9695b5a
    Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation was canceled.;transfer service job status is invalid Response status code does not indicate success:
    400 (Bad Request).. The current operation was cancelled because another operation in the transaction failed.
    Everything seems properly configured. lots of green ticks whenever I set things up. But manual refresh keeps on failing.

    I've reduced the query down to 100,000 records and now I'm getting
    Sorry, something went wrong. Please try again. Correlation ID: 7e498494-95d0-4dff-84ed-ead169a5617e
    The DMG is not even registering the attempt in the event logs.
    Before at least I managed to get this:
    Microsoft.DataTransfer.Common.Shared.HybridDeliveryException: The Data Transfer Service has encountered a fatal error when performing the data upload. ---> Microsoft.WindowsAzure.Storage.StorageException: The client could not finish the operation within
    specified timeout. ---> System.TimeoutException: The client could not finish the operation within specified timeout.
       --- End of inner exception stack trace ---
       at Microsoft.WindowsAzure.Storage.Core.Util.StorageAsyncResult`1.End()
       at Microsoft.DataTransfer.ClientLibrary.BlobUploadTask.PutBlockCallback(IAsyncResult asyncResult)
       --- End of inner exception stack trace ---
       at Microsoft.DataTransfer.ClientLibrary.BlobBinarySink.Write(IEnumerable`1 streams)
       at Microsoft.DataTransfer.ClientLibrary.BinaryTransfer.Run()
       at Microsoft.DataTransfer.TransferTask.TransferRuntimeTask.Execute()
       at Microsoft.DataTransfer.TaskHosting.ThreadTaskWorker.RunTask()
    Job ID: edd0fec1-789a-4487-a371-6aafbd8aaffa
    Task ID: b71f8b48-b4ff-43f5-8dc5-6aefd390c0fe
    Queue ID: a41a0d92-8327-458a-80e0-2cf3065dd705
    Log ID: TaskExecutionFailed
    So far my analysis is:
    1.5M rows = won't even start pushing data and will timeout very early in the process
    300,000 rows = will get past the initial timeout (probably the query identifying how much data needs to move), just to crash on the second timeout (actually pushing the data to the cloud).

Maybe you are looking for

  • CS3 Standard - Has stopped working

    I have just begun receiving error messages,"Adobe[Program]CS3 has stopped working..A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. This happens when I try to open Illus

  • Oracle Report in Apex

    Dear all, I have existing jsp report that was developed with Oracle Report. Is it possible to reuse the report in Apex?. If so how? Thanks. Regards, Kueh.

  • Want to print a dark line as seperator in table row  for each loop

    Hi, I have a collection of data I have to print it in a table but condition is it should print a dark line as separator in table for each loop & also have to print a dark line in the end of table. means Some thing like below Table Headings Data1 Data

  • Facebook and Twitter status buttons in notification center?

    Hi Apple community, I was messing around on my ipad mini with iOS 7 today and noticed that I cannot update my Facebook and Twitter status from notification center. Does anyone know how to turn this feature back on or if it was done away with iOS 7 al

  • Thread 1 cannot allocate new log, sequence 1258

    Hello buddies, I am receiving this message and not sure on how to fix it. Please guide me. Fri Jul 30 22:00:17 2010 Thread 1 advanced to log sequence 1256 (LGWR switch) Current log# 2 seq# 1256 mem# 0: F:\maindb\LOG_02.DBF Fri Jul 30 22:00:36 2010 Th