DSO upload and no data in Active data table

Hi Experts,
I have a strange problem.I have loaded data to DSO from DS in BI7. It has the further uplaod to cube.I have activated the DSO and it went sucessfull and had Request ID generated. It has added and transfer records available like 150000 records as I have done full upload. strangly I cannot see any data in Active data table.
Pls advise how can I check the data I am doing some mistake.I have data mart status for this DSO. the deletion of the DSO and reloading could that create the data not visible in DSO even after activation
Pls advise.
Tati

Hi,
I believe this got something to do with the display setting.. After displaying the data, get into the settings menu and look for Layout option --> display --> see if there is any default setting applied.. change this setting to something else.. create a setting with all the columns dragged & dropped.. These are the options you can try..
If this did not resolve.. please try displaying the data from SE16 transaction and post us the results..
Thanks,
Naren

Similar Messages

Error activating of new data to active data in DSO?

hi friends,
in DSO i want move data from new data to active data , i selected request num and trying to activate, i am getting error, how can i solve it.
Activation of Data / 24.07.2007 / 18:56:08
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Resource error. No batch process available. Process terminated
Preprocessing and Postprocessing / 24.07.2007 / 19
Activation of M records from DataStore object DSO_ANI terminated
ple let me know how can i solve
regards
suneel.

Hi Suneel,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri.

Problem in Activating from New data to Active data in DSO

Hi All,
For my DSO I am fetcdhing some fields from other DSO table , through END Routine ,. After running the DTP , I am getting data for the fileds which i am fetching through routine in New data Table.
After Activating the New data table to Active data table I cant able to see my data.
ie in Active data table there is no data for the fields which i am fetching through end routine after activating the request . One more thing my request is activated sucessfully.
it shows ready for reporting.
Please help me on this................................

Hi ,
After unchecking the checkboxes mentioned in my previous post and still if you dont find data in active table then I think the problem might be because of Database Statistics not being up-to-date for your ODS tables which causes a delay in data load completion process. You can try refreshing the Database Statistics of your ODS both tables and indexes (active data table, change log table and new data table). This probably may resolve your problem.
Srikanth.

BT activation date confirmed and changed 4 times! ...

Back in November last year I had placed an order to move my services (phone and BT infinity 2 at the time) to my new home (new build) and asked for an activation date of 22 December. At the time I paid for line rental for onw year in advance, which I now regret.
Shortly thereafter I started receiving messages and calls from BT stating that my services activation would be delayed and a date of Jan 26 2015 was eventually confirmed. As this date approached, I then got a message that the activation date had actually moved to May 22! Convinced it was an error of some sort (it also appeared on my account information online), I called BT and was assured that it would be much earlier than that but that they could not confirm when at the time. I called again later and it was eventually revealed to me that my current order was not progressing and they would open another.So, I had another order created with a potential activation date of Jan 30, but I was assured that they would try to fast track it. This was around Jan 15.
Time went by and I eventually received calls/messages/emails stating that a Jan 26 date was indeed confirmed for an engineer visit. The 26th came and nobody showed up. I called the next day, and the staff were apologetic about the situation and explained that it was an Openreach issue and that some work was still ongoing to get my services activated. I replied as I had before that many people in my street already had phone and broadband so surely the area was covered (the online coverage checker states that I can get BT infinity 2...). In the end a date of Jan 29 was again confirmed and I asked specifically if they were sure they could make it this time - I was assured that it would be the last slippage.
Sadly, it was not to be. Just yesterday I received a call saying that my service was again delayed and as such I would have to choose another activation date - the earliest offered being Feb 5. The reasons were again to do with Openreach not fulfilling their end of the bargain, and the fact that I was in a "bronze" zone. I replied that I was loosing count of how many times my activation date had been moved and re-confirmed, but was again assured that this would be the last time...
So now, I wait for Feb 5. I am considering cancelling my services with BT altogether but unsure of whether I would get my line rental saver payment back if I do so.
If a mod checks this and is willing to help, I would very appreciative. Thank you.

Hi estrolas3,
Thanks for posting and welcome to the forum, I'm sorry about the delay activating your line. Please use the 'contact the mods' link in my forum profile to send in your details and we'll check the order. You can find the link by clicking on my username.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Activation date 2 days ago and still no broadband

Hi Everyone
I ordered broadband on an existing bt phone line on 17th June and was given an activation date for 3 weeks later. My activation date was Monday and 2 days later I am still without a connection. The website tracker syas that "Your Broadband order is in hand with a member of our team, if there are any issues we will contact you. Please continue to check online for further updates" The Indian call centre promised me a call back as they needed to contact 'their supplier'. 24 hours on from that phone call and this hasnt happened. Would a mod be able to give me their contact details so they can look into this to find out what the delay is and how long the process might take. Working from home means I need a continuity of internet provision moving from one supplier to the next.
Thanks in advance
John

Just finished a live chat session as the promised returned phonecall never materialized. The operator said that "The reason for the delay is regarding the ground work for the cables to be connected from the exchange". How can this be the case when it's BT broadband coming through an already installed BT phone line that has been carrying broadband from another provider. It's not BT infinity as that hasnt rolled out to this part of Bristol yet. In the live chat he said that I should have broadband by 13th July, which is a whole working week after the promised start date.

Error while activating data loaded into DataStore Object in BI 7.0

Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...

Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri.

Buffer busy waits on UNDO data in Active Dataguard

Oracle Version: 11.1.0.7.0
Active Dataguard
Statspack has been configured for Active Dataguard on Primary database.
We got an spike of Buffer busy waits for about 5 min in Active Dataguard, this was causing worse Application SQL's response time during this 5 min window.
Below is what i got from statspack report for one hour
Snapshot       Snap Id     Snap Time      Sessions Curs/Sess Comment
~~~~~~~~    ---------- ------------------ -------- --------- -------------------
Begin Snap:      18611 21-Feb-13 22:00:02      236       2.2
End Snap:      18613 21-Feb-13 23:00:02      237       2.1
   Elapsed:               60.00 (mins)
Top 5 Timed Events                                                    Avg %Total
~~~~~~~~~~~~~~~~~~                                                   wait   Call
Event                                            Waits    Time (s)   (ms)   Time
buffer busy waits                                2,359       2,133    904   76.2
reliable message                                 7,210         179     25    6.4
parallel recovery control message reply          8,831         109     12    3.9
CPU time                                                       100           3.6
latch free                                          13          85   6574    3.1
Host CPU (CPUs: 16)
~~~~~~~~              Load Average
                      Begin     End      User System    Idle     WIO     WCPU
                       1.07    0.82      0.68    0.39   98.88    0.00Since this is 11g version I was able to drill down on the segment on which buffer busy waits were occurring by using v$active_session_history on Active Dataguard.
SQL> select count(*),p1,p2 from v$active_session_history where event='buffer busy waits' and sample_time between to_date('21-FEB-2013 21:55:00','DD-MON-YYYY HH24:MI:SS') and to_date('21-FEB-2013 22:09:00','DD-MON-YYYY HH24:MI:SS') group by p1,p2
COUNT(*)         P1         P2
      2136          3      99405
        17          3       7293
SQL> select owner,segment_name,segment_type from dba_extents where file_id = 3 and 99405 between block_id AND block_id + blocks - 1
OWNER                          SEGMENT_NAME              SEGMENT_TYPE
SYS                            _SYSSMU14_1303827994$     TYPE2 UNDO
SQL> select owner,segment_name,segment_type from dba_extents where file_id = 3 and 7293 between block_id AND block_id + blocks - 1;
OWNER                          SEGMENT_NAME              SEGMENT_TYPE
SYS                            _SYSSMU11_1303827994$     TYPE2 UNDOThought to check the SQL_ID which were waiting on this buffer busy waits.
SQL> select count(*),sql_id,session_state from v$active_session_history where event='buffer busy waits' and sample_time between to_date('21-FEB-2013 21:55:00','DD-MON-YYYY HH24:MI:SS') and to_date('21-FEB-2013 22:09:00','DD-MON-YYYY HH24:MI:SS') group by sql_id,session_state order by 1;
COUNT(*) SQL_ID        SESSION_STATE
         1 cvypjyh0mm56x WAITING
         1 02dtz82as4y42 WAITING
         1 80gz2r4hx1wrj WAITING
         2 6tfk1t4mwt7hu WAITING
         9 0q63qhsbqmpf0 WAITING
        12 0jgnx96ur0bmb WAITING
        12 7pguapqcc6372 WAITING
        14 4t6hqk5r2zbqs WAITING
        18 1qwt0qkd59xj3 WAITING
        23 5phgg8btvhh6p WAITING
        23 banp2v6yttym7 WAITING
        30 a1kdmb1x084yh WAITING
        30 8hxuagk22f8jz WAITING
        30 9r0nysyp360hn WAITING
        31 cackx62yu477k WAITING
        32 40zxqg1qrdvuh WAITING
        32 0jqrd56ds1rbm WAITING
        32 7009zmuhvac54 WAITING
        38 1jb37ryn1c871 WAITING
        60 aum74caa623rs WAITING
        63 cr8mv0wawhak9 WAITING
        63 3xgk3vsh3nm08 WAITING
        86 3k9cq3jv0c3rg WAITING
        95 0sy9vjuutgwqu WAITING
       122 bhn2kk76wpg12 WAITING
       134 4pkfqgyt7rh34 WAITING
       139 1sbzsw7y88c7t WAITING
       146 92y0ha2nqd6zj WAITING
       163 djjqcp1sg2twb WAITING
       173 arxq6au12zazw WAITING
       256 fa0gzxmgyyxj2 WAITING
       282 2f17qywcgu751 WAITINGSo top 10 sql_id's were on tables TAB1 and TAB2 under schemas SCHEMA1 to SCHEMA8.
Checked DML's occurred on Primary using dba_tab_modifications view since last stats job ran on these was about 10 hours ago from when the issue occurred on Active Dataguard.
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES from dba_tab_modifications where TABLE_NAME='TAB1' order by 3;
TABLE_OWNER               TABLE_NAME              INSERTS    UPDATES    DELETES
SCHEMA1                    TAB1                     4448          0       3728
SCHEMA2                    TAB1                     4547          0       4022
SCHEMA3                    TAB1                     4612          0       4152
SCHEMA4                    TAB1                     4628          0       3940
SCHEMA5                    TAB1                     4719          0       4258
SCHEMA6                    TAB1                     4809          0       4292
SCHEMA7                    TAB1                     4853          0       4356
SCHEMA8                    TAB1                     5049          0       4536
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES from dba_tab_modifications where TABLE_NAME='TAB2' order by 3;
TABLE_OWNER               TABLE_NAME                  INSERTS    UPDATES    DELETES
SCHEMA1                    TAB2                        25546          0      26360
SCHEMA2                    TAB2                        26728          0      27565
SCHEMA3                    TAB2                        27403          0      27763
SCHEMA4                    TAB2                        27500          0      28149
SCHEMA5                    TAB2                        28408          0      30440
SCHEMA6                    TAB2                        30453          0      31906
SCHEMA7                    TAB2                        31469          0      31988
SCHEMA8                    TAB2                        32875          0      34670 But confused about Why there could sudden spike of demand on UNDO data in Active Data Guard ? Could any one please shed some lights on finding the reason for this issue ?

But confused about Why there could sudden spike of demand on UNDO data in Active Data Guard ? Could any one please shed some lights on finding the reason for this issue ?It's been interesting, The job runs only on ADG?
Even it is only reporting purposes, Which runs only select statements. Are you sure that issue is only because of this job?
Moreover am interested to know, How you able to monitor at the same time? Using EM?
What all are the jobs ran on primary at the same time?
Then, is it possible to run the job on primary and see whats the response?
I suggest you to run the same job again on standby and see the ET of the job and also gather the statspack to check whether you got same buffer busy waits or not.
What storage you are using for primary and standby? In terms of I/O and performance all are same?
You got chance to take statspack even on primary database?
What are the parameters differ in primary and standby?
Also check this note, Heresome work around provided.
*Resolving Intense and "Random" Buffer Busy Wait Performance Problems [ID 155971.1]*

Goldengate from physical standby with Active data guard or from logical standby - which is better?

Hi,
We have Oracle 11.2.0.4 and are currently using Active Data Guard on a physical standby. My boss wants me to use Goldengate
to replicate several schema from Oracle to SqlSserver. She doesn't want to touch the Primary, which is in production. Would it be better
to setup a Logical standby for Goldendate to use, in addition to the Physical standby? Or will it be sufficient to use the Physical standby?
The application tables don't all have primary keys. I'm trying to decide if the Logical standby adds another layer of complexity or would
introduce delays in getting the data from Oracle to Sqlserver.
Thanks in advance,

Hi,
In this case I recommend you to use physical standby + Golden gate with ALO mode. You might have sligthly more trouble in logical standby. it means you might have more trouble at Goldengate's extract side.
You said
The application tables don't all have primary keys.
so you have to add keycols on replicat side.
I recommend you to add an index which should consist of keycols columns. it will be necessary for replicat performance.
Best Regards

Activation date pushed back twice

Hello,
I recently moved into a new flat and told BT 4 weeks in advance that I will be moving and I was told the line would be activated on the 27th of June. That day passed and only the phone line was activated. I called up and was then told that there was an issue with activating Infinity broadband so they gave me another activation date which is today. Today I called just to check if everything was fine and after about an hour of waiting in queues I was told that the order got "lost in the system" and that a new activation date has been set for the 16th of July.
Is this normal? How many times can they push back the activation date? Im considering cancelling my contract as it's becoming more and more frustrating. Can I cancel my contract if they haven't provided me with the full service?
I depend on the internet as I work from home and I've pushing back deadlines as I can't work properly without it. I already spent £80 on topping up mobile data and I just can't afford to keep working like this.
Has anyone had a similar experience? Can anyone give me some advice?

activation is by openreach who own the lines so regardless of ISP apart from cable you will need openreach to install/activate your connection.
as this is a residential line and is not supposed to be used for business purposes albeit many use it for checking business email and casual business use. there is therefore no consideration about loss of business. did you consider a business line which would give you a better level of service guarantee
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Uploading and downloading files in webdynpro java

how to upload and download xl files in webdynpro java application .

Hi ,
Refer these links they maybe helpful to you
You can check this sampple example from SDN
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40db4a53-41a9-2910-d4a2-9c28283f6658
Uploading and Downloading Files In Web Dynpro Java
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00062266-3aa9-2910-d485-f1088c3a4d71
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/202a850a-58e0-2910-eeb3-bfc3e081257f
http://help.sap.com/saphelp_nw04/helpdata/en/43/85b27dc9af2679e10000000a1553f7/content.htm
Uploading and Downloading Files In Web Dynpro Tables
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0e10426-77ca-2910-7eb5-d7d8982cb83f
Some more links regarding Uploading and DownLoading Files
Uploading and downloading files
Upload and Download file through RFC called by java
Regards,
Saleem

Problem in uploading data from psa to active data and change log dso.

hi experts
my data from psa is coming to new data dso but not to active data and change log dso. can you please help me out...

Uday,
Please select the request from Manage screen of DSO and click on Activate, pop-up comes again select the request and click on Start. ( If it is Standard DSO ).
In case of Write optimized DSO you need not to activate it.
Regards,
Ramkumar.

HT1386 I was connected to my desktop to upload pictures but I tune activated and sucked up all my phone data and notes. I don't have I tune account, how can i get back those data??

My I phone was connected to my desktop to upload pictures, magically I tune activated and synced all my phone data and notes. I don't have Itune account.

This happened because you had not disabled automatic syncing in iTunes (so your phone synced when you connected it to your computer). If you haven't synced again since this happened you may be able to restore your phone to the backup created at the beginning of the sync process to recover your data. (If you have synced again the backup is already overwritten and your data is lost). To do this do the following:
Without connecting your phone, open iTunes on your computer and go to Preferences. On the Devices tab check "Prevent...from syncing automatically".
Now connect your phone and import your photos if you haven't already done so (see http://support.apple.com/kb/HT4083).
Now open iTunes and right-click on the name of your phone on the left side and select Transfer Purchases (to transfer any recent purchases to your iTunes library prior to restore from backup).
Right-click on the name of your phone again and select Restore from Backup, choose your most recent backup to restore from.
When complete, you can go back to iTunes>Preferences>Devices and re-enable automatic syncing.

Error while activating data from new table of DSO to active table

HI,
while activating data from new table of DSO to active table i am getting
error message as "Error occurred while deciding partition number".
Plz any idea hoe to resolve this one.
thanks & regards
KPS MOORTHY

Hi
You are trying to update/upload the Records which are already been there in the DSO Active Data Table which has the partition.
Try to see the Record Nos already been activated and update/upload with selective, if possible.
You can trace the changes at Change log table for the same.
Hope it helps
Edited by: Aduri on Jan 21, 2009 10:38 AM

Activating data in DSO got dump SAPSQL_EMPTY_TABNAME after BW system copy

Hi all,
We had an issue after system copy.
After a system copy the data in the standard DSOs(all of them) cannot be activated. The DOSs themselves are active, the transformations are active but if one attempts to load data and activate u2013 it does not work. The job terminates with shortdump SAPSQL_EMPTY_TABNAME.
Found the issue is caused by u201Cmore than one versionu201D of the change log.
We tried the Program RSAR_RSTSODS_CHANGELOG_VRS but it didn't work.
We had the solution like this:
After activating the DSO itself(the object) using RSDG_ODSO_ACTIVATE the issue disappears and the data can be activated. Issue also disappears. BUT Drawback: Activating the DSO causes the transformations to deactivate.Then we used the program RSDG_TRFN_ACTIVATE to activate all transformations. And then the issue disappeared.
Want to know what the root cause for this. From some SDN threads, mentioned BDLS job in the post refresh steps are not correctly done during system copy may cause this issue. How did the BDLS run wrongly cause this issue? And what is the exact correct way? We ran BDLS for each source systems inlcuding the target refreshed BW system itself by the default selection - conversion of Client-Dependent and Client-Independent Tables; because we used database copy
for the system refresh.
We also restored all source systems in RSA1 inlcuding the refreshed BW system own in the post-refresh steps.
Thank you very much for your information and suggestion.
Heming

Hi Arun, as you say two change log tables it´s strange. In fact in my opinion it´s not right but the problem is that the second change log table appears after executing std SAP report RSDG_ODSO_ACTIVATE in order to be able to activate the DSO. So the solution provided by SAP it works but i´m not sure if the right one. Besides this the original change log table is full of data while the second one is empty... for new loads which are gonna a be filled by the activation process ? I suppose the second one... will this have some impact with the data stored in the first one... not in theory but.... i do not feel confortable with the consequences of this report.
And the most important, it seems that the reason why the DSO and the change log table had problems is due to a some problems or missing steps after executing the BDLS after BW system refresh but nobody can confirm this point...
So, i´ve been able to solve the issue but now i have two change log tables for the same DSO.
Anybody has the same situation after executing the above mentioned SAP std report ?
Regards,
Joaquin Casas Baca-Castex

DSO upload and no data in Active data table

Similar Messages

Maybe you are looking for