Data transfer between 2 views with context nodes

Hi all,
I'm working for the moment in CRM 7 with the BSP WD Component Workbench.
I have a small exercice (just to learn more about the webclient ect) and I have some problems.
I created 2 views:
- Worklist (List with all workflow items available for user)
- Workflow (When choosing a workflow item in the worklist, the workflow will be executed, or whatever...)
Now, I have a internal table with all workflow data and when I click on one workflow item, I want to give this data (from one record) from my internal table in a Context node tot the seconde view.
But how?? I realy don't know.
Can someone help me with this?
I created a custom controller
Should I use model nodes or value nodes?
what next? How can I fill this nodes with the data?
Any examples?
Thx!
Hans

Hi Hans,
Check out this link.
[Reading Attributes from different context nodes in the same view;
Regards,
Sijo

Similar Messages

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Error 33172 occurred at Read & Write data transfer between two or more PF2010 controller

Hi,i need to do data transfer between two or more FP2010 controller.e.g. FP2010(A) & FP2010(B).
FP2010(A) need to transfer the measurement (from its I/O module) to FP2010(B) to do the data analysis.These data transfer should be synchronous btw two controller to prevent data lost.
From the vi used in the attachment,i encountered some problems at:
(1) Error 33172 occurred while publishing the data.Can i create and publish data under different item name?
(2) How to synchronies the read & write btw contorller?
All controller are communicating with each other directly without the need of a host computer to link them together
Is there any other method to do fast data transfer betwe
en controller?

Hi YongNei,
You were succesful in omiting enough information to make it very difficult to answer!
Please post your example.
Please tell us what version of LV-RT you are using.
Please define what you concider "fast data transfer".
Have you concidered mapping the FP tags of FP2010(A) to FP2010(B) and vise versa?
WHat exactly has to be syncronized?
If you have something that is close to working, share that.
Well, that as far as I can go with the info you have provided. Depending on the details, what you are asking could be anything from trivial to impossible with the currently available technology. I just can't say.
It would probably be a good idea to start over with a fresh question (sorry) because not many people are going to know what a a "
PF2010" is and I can not guarentee that I will be able to get back to you personally until next week-end.
Trying to help you get an answer,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Generic Java class for working with Context Nodes

Hi,all
I would like to write generic Java class for working with Context Nodes:
populating node,
add element to node,
update node element,
remove node element
Any ideas how can I do it?

Hi,Armin
Thanks for your answer.
I have many nodes with the same structure,but different data.
I don't want to work with each one of them individually.
This is the main reason.
Regards,
Michael
Any ideas?

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

How to set value from one view to other view's context node attr b4 save

HI all,
My requirement is as below:
There are two views in component BP_CONT.
BP_CONT/ContactDetails    IMPL class
BP_CONT/SalesEmployee   SALESEMPLOYEE    STRUCT.SALESEMPLOYEE
I want to set value from first view to second view's context node's attribute.
i get Sales Employee BP number in ContactDetails view, from here i want to set that value in to STRUCT.SALESEMPLOYEE
of second view in the same component.
please send me code snippet for doing the same.
Thanks in advance.
seema

Hi Seema
You can access the fields from different views by either using custom controllers or by using component controllers, in your case you can access the Sales employee BP number from the Component controller.
first access the component controller as below in BP_CONT/SalesEmployee (in do_prepare_output method) or in (specific setter method)
lv_compcontroller type ref to CL_BP_CONT_BSPWDCOMPONENT_IMPL,
lv_partner type ref to cl_crm_bol_entity,
lv_role type string,
lv_partner_no type string.
lv_employee TYPE REF TO if_bol_bo_property_access,
lv_compcontroller = me->COMP_CONTROLLER.
lv_partner ?= lv_compcontroller ->typed_context->-partner->collection_wrapper->get_current( ).
lv_role = lv_partner->get_property( iv_attr_name = 'BP_ROLE' )
IF LV_ROLE = 'SALESEMPLOYEE'
lv_partner_no ?= lv_current->get_property( iv_attr_name = 'BP_NUMBER' ).
endif.
now set the value
lv_employee ?= me->typed_context->salesemployee->collection_wrapper->get_current( )
CHECK lv_employee IS BOUND.
    lv_employee->set_property( iv_attr_name = 'SALESEMPLOYEE' iv_value = lv_partner_no )
Thanks & Regards
Raj

Data transfer between SAP & Java and Vice versa using IDOC Process

Dear Experts,
        We are working on one of the good requirement related to data transfer between SAP and Java software. Client requirement is, they want to transfer the data in both the ways (from SAP --> Java and Vice versa also).
In detail is, after sales order creation using one custom program loading plan details will be calculated. Once loading dates are confirmed then, user will release the sales document to transfer the data from SAP to Java using "Outbound IDOC processing". Similarly in that JAVA software some shipment details will be performed, once completed from JAVA software again details needs to be pumped back to SAP as "Inbound IDOC Processing".
For this fields are already identified from external software SAP and we are looking for the same to perform the steps in SAP.
At this stage, I need your expert opinion / feedback how to go about at this stage.
Meaning,
                 1. What are the customizing steps needs to be done in SAP..?
                 2. How to trigger the :Outbound IDOC process" once the documents are "Released" from custom transaction
                 3. How to create the link between SAP and JAVA to transfer the data between these 2 software
                 4. How to trigger the "Inbound IDOC Process" from JAVA software to SAP and how to store the data in SAP
Experts, please give your feedback in terms of reply or by sending the step by step process to fulfill this client requirement.
Thanks for your cooperation.
Regards,
Ramesh

Maybe too many open questions in the same document.
Maybe you should repost a more specific question in a technical forum.
This looks like a small project where you already know what you want, maybe you should contract a technical specialist so he proceeds to the implementation!

Is it possible to bind the elments with context node dynamically?

Hi All,
Is it possible to dynamically bind elements with context nodes?
In other words, at runtime, can we change the binding of an Inputfield to another context. Or a table to programmatically bind to another table?
Regards,
urbashi

hi urbashi.......
      it is possible..
       you should first pass the id of he ui element and then bind it.
       for ex:
         if there is an input field, you can get the attribute that is bound, using cl_wd_input_field->bound_value.
         if you want to set an attribute, use cl_wd_input_field->bind_value.
         the first one will give an idea of how a valueshould be given.
---regards,
   alex b justin

Data transfer between 2 table views

Dear Gurus
Here is my scenario.
I need to transfer data between 2 table views (Both these table views are having only column). These 2 tables are present in separate views (under same viewset).
Now initially I need to display some data in one of the tables when I display the screen for the first time (this I was able to achieve). Now if I double-click on any row of this table, I need to move the data present in that particular row to a different table present in the same screen.
Here is what I have achieved.
1) When I click on any row, I was able to capture the row index and the corresponding data in that row.
I put some code in the method EH_ONSELECT (present in the event handler) to get this working.
Now my question is
How can I move this captured data into a different table view?
I tried investigating on some of the methods such as do_prepare_output. But I am left with no clue on what coding needs to be done here.
Any help will be greatly appreciated.
Thanks
Raj

Hi Raj,
You can write the code in methods like DO_PREPARE_OUTPUT, but need to take adequate care of perfrormance as this method gets triggered for all server events.
If you can identify any other method on the second view at an instance when you select rows on view1..
that too is fine.
You can get the selected entries from a context node collection wrapper method...
DATA: lr_marked_line TYPE REF TO if_bol_bo_col.
* Get the lines selected by the user
lr_marked_line = me->typed_context->productcategory->collection_wrapper->get_marked( ).
You can do a work around this way too...create an internal table attribute in the IMPL class of Custom Controller...Update it with the selceted rows in view1.
Populate view2 with the values in this table by accessing them from Custom Controller.
Code can be in DO_PREPARE_OUTPUT or some method that triggers at the point you select values in first row.
Regards,
Masood Imrani S.

Data transfer between OSX 10.9 and WIN 7 stops

Hello,
Unfortunately, I have a problem with the data sharing through SMB.
I can connect easily to my Mac and see shared folders or data. But in attempting to copy files from Mac to Win 7 PC there is an error. The data transfer is terminated after a while. The file used in the test is an MKV with the size of 1.34 GB.
The Mac is accessed from a Win 7 PC with administrator privileges. The systems are connected via Wi-Fi 802.11 n.
The exchange of data between OSX in use of SMB or AFP works without any problems.
Maybe someone has a solution or a tip for me.
regards

Hi ip0wn,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Please click on the link for more details and troubleshooting steps:
Mac OS X: How to connect to Windows File Sharing (SMB)
http://support.apple.com/kb/HT1568
Cheers,
- Judy

Data moving between Oracle 10g with CLOB fields

Hi all,
I have a trouble in migrate data between Oracle 10g with different platform. The worst thing is that I don't have a DBA account for the DB importing data. I think I can't use IMP or IMPDP in this way. So I seek help from sql developer, but it seems having another problem with CLOB data moving.
Re: EA2 : SQL Developer 1.5 : export data CLOB columns
in the thread, I found someone wrote this:
- SQL Developer v1.5 EA2 - exports first 4000 chars (which is anyway too small for me, because my CLOBs are larger - if they were smaller, I would have made them VARCHAR2s instead!).
I would like to ask:
1, What SQL Developer v1.5 EA2 is? Is it the Data Modeling one?
2, How to export table data with CLOB with SQL Developer v1.5 EA2? Since 4000 chars is enough for me to use.
OR any other method to export CLOB but not IMP / IMPDP ?
Now I am using the spool of sqlplus to export CLOB.
Many thanks,

1. The EAs are Early Adapters, betas, so you should expect the same behaviour from the latest 1.5.4 production release.
2. Exports can be done with the Database Export tool, through the table's context menu in the navigator tree or the result grid's context menu.
Have fun,
K.

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

How to bind UI Element with Context Node Attribute Element

Hi,
I'm building my view dynamically in the wdDoModifyView method.
Is it possible to bind a "TextView" element to a specific element of an attribute node?
Scenario:
Node_Employees
|
+- Attribute_Code
|
+- Attribute_Name
Node Contents:
Employees
|
+- Code: 1, Name: Employee 1
|
+- Code: 2, Name: Employee 2
|
+- Code: 3, Name: Employee 3
I need to do something like binding a TextView UI element to the "Name" attribute of the element #2, what would result to show "Employee 2" on my view.
How can I do this?
Thanks in advance,
Geraldo.

Hi Saravanan,
First I populate the context node and it won't change during view's lifecycle. After that, I build my view and bind the TextView UI elements to the node context attributes elements.
If the node has 10 elements, I will build 10 TextView UI elements and bind them to each attribute element.
Regards,
Geraldo Brígido.

Data Transfer Between HR and Erec

Hi all,
We are using having 2 backend systems 1 for HR other than Erec and another one for erec.
Now we have setup the ALE data transfer using Message type HRMD_ABA.
In erec we have only ERECRUIT Component deployed in backend,no EA HR or SAP HR component deployed.
MEaning no PA* tables.
Now when Transfer personnel number(HR!001-A008 with Position) to erec box,it says no pernr exist.
Howver i cannot tranfer the pernr from ECC to Erec as we dont have PA* tables in Erec.
Can you share me the object types that are transferred from ECC to EREc and EREC and ECC.
What are the components to be deployed in backend Erec box.
In Portal for requistions application which should backend(System Object) and for recruiter and recruitment admin applications which should be the backend system(System Object).
Thanks,
Nachy

Hi ,
1) First get your users created with roles in your Erec system
Example recruiter ,Manager ,Recruitment Admin
2) Get your Structure created in your HR back end system .
3)Make sure you maintain your basic Infotypes with 0105 miantained (System user name /Email id )
Assign the user to 0105 subtype 0001
4)ALE that you have setup first move Org structure moved
next move the person (Pers no ) .
ALE chose the insert mode and goto WE10 if yoru IDOCS are clean without errors .
Make sure all the personal data including address ,postal code is all maintained .
Let me knwo if it helps
Regards
Santosh

Best way to data transfer between Database & XML & Display to end user

Hi,
What is the best mothod to insert the data into tables from XML and viceversa. Also I need to display the data to the end user, with the provision to edit the data.
Thanks in advance

If you want to edit and store the data completely in XML then you could do the following:
1) Register the XML schema and specify a default table.
2) Connect to the XDB repository and store your documents using FTP or WebDAV. Make sure they reference the registered schema in the instance header. This should load the underlying XMLTYPE table you specified as the default table.
3) Connect to the repository with a WebDAV-aware XML editor.
And if you want to take this a little further, then you could also do the following:
4) Create a relational view on top of your XML table using code similar to below.
CREATE OR REPLACE VIEW "ACT_LIST" ("NAME", "CITE", "SORT", "JURISDICTION", "LOCATION") AS
SELECT
ExtractValue(OBJECT_VALUE, '/act/act_version/name[1]') Name
, ExtractValue(OBJECT_VALUE, '/act/act_version/cite[1]') Cite
, ExtractValue(OBJECT_VALUE, '/act/act_version/name[1]/@sort') Sort
, ExtractValue(OBJECT_VALUE, '/act/@juris') Jurisdiction
, b.ANY_PATH Location
FROM
ACTS a
, RESOURCE_VIEW b
WHERE
Ref(a) = ExtractValue(b.RES, '/Resource/XMLRef')
5) Put that into an application (e.g. APEX) as a report.
6) Link from the report to the XML editor and pass the location of the document in the repository. Or you can use an embedded WYSIWYG XML editor so that they edit the document inside the application and the whole thing is fairly seamless for the user.
Hope this helps.

Data transfer between 2 views with context nodes

Similar Messages

Maybe you are looking for