Data Type on report is different than Data Source

Hi Everyone
i have createad a simple daily status report  using SQL Server 2008R2 DB & SSRS. My data source is simple table which has  one column & its datatype is date. But when i pull this column on report in preview it shows date & time. 
i just want to show the date not time. So can you please help me with this.
thank you in advance

Hi,
You can also try like this ,
=FormatDateTime(Now, DateFormat.ShortDate)
=CDate(Now).ToString("dd/MM/yyyy")
Also try this link -
http://thavash.wordpress.com/2007/04/10/working-with-dates-in-reporting-services/
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Similar Messages

  • As to the data type of the data type of the difference between two date type of datas

    Hi,
    I have a question about the data type of the difference between two date type of datas.
    There are two date type of datas as:
    SSHIPMENTS.RECEIVEDATETIME
    SSHIPMENTS.PROMISEDATETIME
    I try to use the following SQL Script in Oracle SQL*Plus as:
    SELECT CASE
    WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:00:00.000' THEN 'OnTime'
    WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:30:00.000' THEN '60-89 Minutes'
    ELSE '3+ Hours'
    END
    FROM SSHIPMENTS;
    The error message of "Invalid Number" for the '000 01:30:00.000' happens.
    I don't know if the data type of the interval is wrong.
    Many Thanks,
    Cathy

    SELECT CASE
    WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss')) < '010000' THEN 'OnTime'
    WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss'))< '000 01:30:00.000' THEN '60-89 Minutes'
    ELSE '3+ Hours'
    END
    FROM SSHIPMENTS;
    just try it out..

  • The key columns of the country measure group attribute do not match in either number or data types to the key columns of the source attribute

    I have a country dimension which is used in 5 cubes. Now I want to change 'key column' property of the country attribute. Whenever I do this, I get an error as "The key columns of the country measure group attribute do not match in either number or
    data types to the key columns of the source attribute". I dont understand what this error is about.
    Can someone please help? Thanks in advance.
    -Regards,
    Raj Patil

    sounds like you need to verify your dimensional usage tab to verify the relationships between dim and fact on the measure group. 
    Hi Talktorajpatil,
    As Jon said, you can verify the relationships between dim and fact on the measure group on the dimensional usage tab. Use this section to define how you "join" your measure groups to your dimensions.  There may be a Dimension-Measure Group relationship
    that is defined using the wrong attributes and you'll need to select the correct attributes to link the Dimensions to the measure groups. Here are some similar thread for your reference.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/74203b66-8a71-4681-8e47-8f99cce87b3d/error-on-the-measure-group-which-do-not-match-the-data-type-of-the-key-column?forum=sqlanalysisservices
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2421058d-fd4a-44b8-8c7c-b0b349bbef2d/measure-group-attribute-key-column-does-not-match-source-attribute?forum=sqlanalysisservices
    Hope this helps.
    Regards,
    Charlie Liao
    TechNet Community Support

  • How to edit/change data type on report that was selected by mistake

    Hello there
    I created a report in APEX and one column is giving error because the data type of one column supposed to be a varchar2 but somehow the report was created with a Date data type. I want to change the data type without recreating the whote report. Can someone help? I tried to edit the report but couldn't be able to figure out.
    HELP....

    I found a solution for this, thank you.

  • How to show a Account member (date type) in reports??

    Hi,
    I have a Account member of date type.
    but when I am using that member in reports it is not showing me the date that I have entered in planning web form.
    I have the same member in planning web form and it is showing me proper date.
    Eg: 19/Dec/1985 is showing as 19851219 in report.
    How to display it in proper date format???
    Thanks,
    Sourabh

    I think you might be using Essbase database connection in reports where dates are stored as numbers. You probably need to use Planning database connection on your reports to make date data type show up correctly.

  • How can I read a binary file stream with many data type, as with AcqKnowledge physio binary data file?

    I would like to read in and write physiological data files which were saved by BioPac�s AcqKnowledge 3.8.1 software, in conjunction with their MP150 acquisition system. To start with, I�d like to write a converter from different physiodata file format into the AcqKnowledge binary file format for version 3.5 � 3.7 (including 3.7.3). It will allow us to read different file format into an analysis package which can only read in file written by AcqKnowledge version 3.5 � 3.7 (including 3.7.3).
    I attempted to write a reader following the Application Note AS156 entitled �AcqKnowledge File Format for PC with Windows� (see http://biopac.com/AppNotes/ app156Fi
    leFormat/FileFormat.htm ). Note the link for the Mac File format is very instructive too - it is presented in a different style and might make sense to some people with C library like look (http://biopac.com/AppNotes/ app155macffmt/macff.htm).
    I guess the problem I had was that I could not manage to read all the different byte data stream with File.vi. This is easy in C but I did not get very far in LabView 7.0. Also, I was a little unsure which LabView data types correspond to int, char , short, long, double, byte, RGB and Rect. And, since it is for PC I am also assuming the data to be written as �little endian� integer, and thus I also used byte swap vi.
    Two samples *.acq binary files are attach to this post to the list. Demo.acq is for version 3.7-3.7.2, while SCR_EKGtest1b.acq was recorded and saved with AcqKnowledge 3.8.1, which version number is 41.
    I would be grateful if you someone could explain how to handle such binary file stream with LabView and send an example to i
    llustrate it.
    Many thanks in advance for your help.
    Donat-Pierre
    Attachments:
    Demo.acq ‏248 KB
    SCR_EKG_test1b.acq ‏97 KB

    The reading of double is also straight forward : just use a dble float wired to the type cast node, after inverting the string (indian conversion).
    See the attached example.
    The measure of skin thickness is based on OCT (optical coherent tomography = interferometry) : an optical fiber system send and received light emitted to/back from the skin at a few centimeter distance. A profile of skin structure is then computed from the optical signal.
    CC
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Read_AK_time_info.vi.zip ‏9 KB

  • FieldPoint I/O Data Type versus Fieldpoint I/O Point Data Type

    I have upgrated a project from LV 8.5 version to LV 2011 the Fieldpoint Data Types are different in LV 8.5 it is FieldPoint I/O and in LV 2011 it is Fieldpoint I/O Point. I built the proyect and tried to run it, no errors were present. Now the application can't read or write to the cFP-2100 controller module. In MAX i can see the controller, the modules and the channels both under Data Neighborhood and Remote Systems.
    Setup:
    Controller and Host Drivers: Field Point 6.0.10
    Labview engine 2011
    Here's my cluster in both LV versions

    Hi ulises.uribe.
    According to the Fieldpoint driver readme, you need different versions of the driver for 8.5 to 2011 (The latest version that supports 8.5 is 6.0.8, which doesn´t support LV 2011. Could you confirm that this is the FP driver version that you were using in 8.5 (Fieldpoint 6.0.8).
    You can check if the syntax changed between 6.0.8 and 6.0.10 by creating a constant from one of the fieldpoint VI's and see if the syntax there is the same as the one in LV 8.5. Also, are the VI's that show up in the FP palette the same in both the 8.5 and 2011 versions?
    Finally, you said that you can run your application in 2011 without any errors but it can't communicate with the cFP. Does the program ever throw an error? (Like a timeout error)
    I'll check for more compatibility issues between versions once you confirm which version were you using in LV 8.5.
    Regards.
    Aldo H
    Ingenieria de Aplicaciones

  • Changing data type on a field with populated data

    Hi
    I have a table that has already been populated
    i wish to change the data type of one of the fields from number to varchar2
    this field has the same value you in it throughout
    value = 2005 and i wish to change it to 2005/06
    What is the best way to do this ?
    thanks

    As stated in the user guide, you can change the datatype of a column only when the value of this column is NULL in all existing rows. One workaround (in 10g) would be to add another column, update the new column, drop the old column and rename the new column to the old column's name. Here's an example:
    CREATE TABLE test (col1 NUMBER(8));
    INSERT INTO test VALUES (2005);
    COMMIT;
    ALTER TABLE test add (col2 VARCHAR2(8));
    UPDATE test
       SET col2 = TO_CHAR(col1) || '/06';
    COMMIT;
    ALTER TABLE test DROP (col1);
    ALTER TABLE test RENAME COLUMN col2 TO col1;C.

  • How is a call handled differently than data usage?

    During a hurricane in the fall, my daughter was unable to make calls with her cell phone, but she was able to reach people by texting.  She's on our plan, and has an Android.  I just got an Android.
    I'd like to know how she was able to send and receive text messages, when she couldn't send or receive phone calls, and if texting, email, and internet access are likely to be more available than calling during hurricanes or other serious weather conditions.  My husband and I are looking at communications options, evaluating the cost of our options against the likelihood of being able to call for help if we need it or reassuring loved ones we're all right during hurricanes, ice storms, etc.
    Also, am I right in assuming that if we can't make a phone call, 911 service would also be down?

    Texting is handled through a small data connection via the phone line. I suspect the towers were overloaded with calls, that is why a call could not be made, but a text could occur. Towers can handle thousands of texts as they are just short 2-5k size bursts of info.
    Calls tie up a connection on a tower and if loaded, you can not call out or have someone call you.
    You are correct, if the tower is overloaded or down you can not make a 911 call from that specific location. But a 1/2 mile or more down the road, you may hit another tower and it may work

  • Data in PSA content is different than the data source

    Dear Experts,
    I am using Process chain to update info cube from data source of a z table.  In the process chain, the PSA request request step is having the PSA table number of the correct data source. The info package and the DTP also have the correct data source.
    But after executing the process chain, the info cube is not updated with the required data source. It is updated with data from some other data source which is belonging to a different custom table.
    I have checked the Extraction of the data source in RSA3. This is extracting from correct data source. But when I check PSA contents through process monitor in process chain log for DTP, I found the  PSA content data is different from the data source.
    I am totally confused, how this is possible. Can anybody advise me to troubleshoot and fix this issue.
    Thanks and regards
    Murugesan

    Dear Igor,
    The PSA request is being deleted in a previous step prior to loading the info package.  I can see every time when I run the process  chain, the old request number is deleted and a new request number is created.
    Still the same issue is persisting.
    I also observed one more thing that the second time when we repeat the same process chain, the correct data source data is loaded in the info cube and PSA table. Only during the first time, the PSA table and Info cube  it is not updating with the right data.
    thanks and regards
    Murugesan

  • No data in WEBI report - but plenty of data in the underlying Bex query...

    HI all - I have a problem with my webi queries - which are sometimes breaking...
    We run in the XI 3.1 ans SAP int, kit - SP 2 on both.
    Sometimes af perfectly well functioning webi report suddenly returns no values - stating that the query didn't find anything. However - if I run the bex query with the same selections I get plenty of data. So there is data. Therefore it might be a Int. kit problem - however, when I bulid a new webi report - similar to the first one, with same dimensions etc. but without all the formatting - It runs fine too!!!!
    So it seems like somehow the original webireport has lost the connection to the measueres which it holds - has anyone any idea to what the cause might be and how to fix it?
    By the way - I havre refreshed the Universe and there is nothing to update.
    BR
    Jess

    Hi Ingo - the MDX statement from the MDX trace - does not yield any data - However, if I make a similar selection in the BEX, there i data avaiable - so it might be a problem with the how the MDX statement is generated.
    I've trouble shooted further and my learnings are so far:
    The problem is caused by a combination of 5 dimensions
    If you remove either one of the 5 dimensions - the query returnsdata
    If you add a specific meausure (a restricted bex key figure) - data is also returned - also in the other measures.
    The MDX statement looks like this:
    SELECT  { [Measures].[D6ZWIC1Q7MOA2YCJM1LAPRQNG], [Measures].[D6ZWIC1Q7MPTG70294GIUMJ70], [Measures].[D6ZWIC1Q7NGQDWFMH0MZ7LEP8], [Measures].[D6ZWIC1Q7NI9R53543I7CG78S], [Measures].[D6ZWIC1Q7NWVQXAK7CQUMKQEK], [Measures].[D6ZWIC1Q7NYF45Y2UFM2RFIY4] }  ON COLUMNS , NON EMPTY CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( CROSSJOIN( [0CALMONTH2].[LEVEL01].MEMBERS, [0REPTT].[LEVEL01].MEMBERS ), [0EMPLSGROUP].[LEVEL01].MEMBERS ), [0PAYSCALEAR].[LEVEL01].MEMBERS ), [0ORGUNIT].[LEVEL01].MEMBERS ), [ZBOORGUNT                     ORGEH                         01].[LEVEL00].MEMBERS ) ON ROWS FROM [ZMPHPTGL1/ZDQHPTMN1] SAP VARIABLES [0P_CALMO] INCLUDING [0CALMONTH2].[12] [0P_CALYE] INCLUDING [0CALYEAR].[2009]
    Where all the measures in fact are restricted keyfigures from the Bex query. The dimensions are business content characteristics, as are the variables used.
    The above MDX statement returns nothing - but if you remover either one of the dimensions in the cross joins - the expected data is returned.
    Any ideas to why that happens?
    BR
    Jess

  • Time stamps in reports are different than what is on the record

    We have some users in the UK who have their time setting set to GMT. On our SR form, we have a few date/time fields. The data on the form is correct.. When they run a report with these fields, the time is adjusted by 8 hours, or PST, which is the time zone in our company profile.
    How can we make sure the reports show the correct time based on the users time zone?

    Did you get an answer re this David? Currently a client is having the same issue, trying to run an end of month report with some records entered on the last day of the month not being captured due to this time difference.

  • HTML report looks different than REPORTS PREVIEWER

    I am having a weird problem with my reports. My reports look just fine in the Oralce Reports Developer live previewer. However when I look at the Report Server generated HTML format of the same report, the label on the right side of the page gets truncated. When I change the justification of this label to left justified as opposed to the current setting, then it appears fine. I need this label to be right justified to align with the currency fields below it. Is this an Oracle Bug? Is there something I can do without having to try to layout my report all over again.
    Thanks for any advice in advance.

    Hi
    The output shown on the live previewer will be different then the output generated through server becuase live previewer uses different resolution and fonts. We have not heard of any truncation issue in html output. You nedd to have a proper printer installed which shall be accessible to Report server i.e. if if the Report server owner has the proviledges to print to that printer. Try running Report runtime in batch mode with the same reports to check the Report output. If you can get it right in rwrun60, you will get the same output through Report server also.
    Thanks
    Rohit

  • Flex supported data types - Does Flex support  MSSQL geometry data type. I use WSDL connection.

    I looked at the AMF 3 document but did not find anything there. Connection to the MSSQL database is through WSDL.

    PUSH...

  • Embed via systemFont looks different than via source

    Hello all!
    I'm trying to deal with an odd issue related to embeding fonts... here it is...
    I am embeding some fonts into an swf that is loaded by my main swf.
    I am embeding them like so:
    [Embed(systemFont="Calibri", fontName = "CalibriEmbed", mimeType = "application/x-font", fontWeight = "normal", fontStyle = "normal",
        unicodeRange = "<UNICODE RANGES HERE>",
        advancedAntiAliasing = "true")]
    var Calibri:Class;
    Now when I assign the embeded font to a textfield (via actionscript) like:
    var modifiedFormat:TextFormat;
    modifiedFormat.font = "CalibriEmbed";
    txtField.setTextFormat(modifiedFormat, 0, txtField.text.length);
    The text that is displayed seems to have a different line height than the same text field which has Calibri assigned to it via the properties panel in Flash.  I can somewhat compensate for this by adding some leading to the TextFormat, but that isn't ideal.
    The odd thing is if I embed the font by using source instead of systemFont it works just fine... ie:
    [Embed(source="<PATH>\CALIBRI.TTF", fontName = "CalibriEmbed", mimeType =  "application/x-font", fontWeight = "normal", fontStyle = "normal",
         unicodeRange = "<UNICODE RANGES HERE>",
         advancedAntiAliasing = "true")]
    var Calibri:Class;
    Any ideas why it is doing this?
    Thanks!

    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport in 10.4 & below, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.

Maybe you are looking for