Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.

Hi,
While transferring the data of equipements from R3 to CRM, we want to transfer the status of the equipement (data element J_STACT).
I am using IF_EX_CRM_DATAEXCHG_BADI~CRM_DATAEXCH_R3D_MBDOC_FILL to update the status before transferring the data to CRM.
Here I am getting status of equipment from R3. Now how do I update the status in ct_bus_trans_msg.
I need to update ct_bus_trans_msg-ORDPRP_OBJL_I_D-IOBJECT_ID.
Thank you.

Hi,
Internal table ct_bus_trans_msg have several segments.
These segments are similar to Bdoc meaasge.
There is segment called STATUS_H. You need to populate this segment with status form R/3.
Please reward points if useful
Murali

Similar Messages

Data transfer from BW to CRM using infospoke.

Dear All,
I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
Can someone help here ?
Thanks,
Mukund.

Dear All,
I need to move data from BW to CRM box. I have created an info-spoke for business partner and need to move 3 attributes of business partner into three fields of business partner master data in CRM.
These three fields are added in the BUT000 table. I have tried the RFC destination option in infospoke but somehow, i am not able to figure out how to move data from the info-object of business partner in BW to a table in CRM.
Can someone help here ?
Thanks,
Mukund.

Data updated from R3 to CRM via middleware

Hello all,
I have a scenario where a material updated in R3 is automitically updated in CRM through middleware. The problem is that in the data there is a field, sales organization, which is not being sent correctly to CRM. I need to find the source of this data in R3. Can anyone guide me where do I start?

B926 is the containing sales organisation.
Regards
Shashi

Can we download employee data from ECC to CRM using standard middleware?

HI,
Can we download employee data from ECC to CRM using standard middleware? If yes pl give me the procedure.(not using HR ALE/IDOC)
Thanks,
Regards,
PV

Standard replication for employee to CRM is using ALE.
BDoc send information for CRM for other business partner. If you want to use BDOC message for send employee to CRM, you should build your own BDOC message that read HCC Table and send this information to CRM.
However send this information using ALE is not difficult. Why don't you wan to use ALE?
Regards,
Lyda

Material Updates from ECC to CRM

Hi Experts,
We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
Regards
Charitha

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Transferring of nmaterial from ECC to CRM using middleware tool (R3AC1)

Hello Forum,
I need to transfer material from ECC to CRM where MARA-MTART = 'ZAWA'
In CRM MARA table do not exist.
I need help in transferring data from ECC to CRM using R3AC1 .
This transaction is not in ECC but it is in CRM.
Thanks & Regards
Lovleen

Hello Lovleen,
In transaction R3AC1 you can define the filters for the adapter object MATERIAL.
THen you can do an initial load for this object via txn. R3AS which'll download materials from ECC to CRM.
Thnx.

Customer master data updation from one system to another system

HI Experts,
I have an issue with customer master data updation from one system to another system. And here only one field is not updating properly from one system to another system. and we found this is through idoc , but we don't find field in any segment.
and the field is called ADDR1_DATA-HOME_CITY.
and this will displayed as different city in address column.
but as per the notes given in help , it is by program , form through only passing. but not able to trace and as per my analysis ADRC table , ADRNR had this field HOME CITY.
And this is for some customers updating wrong one from one system to another system , and for some customers field itself not updating in address column.
please can you suggest any one. here are screenshot for your reference.

that is not enough, it was enough in times before 40b release, but this was in the last century
Please read OSS note 384462 - Master data and addresses
it explains what you have to do for ALE

Upload data from excel to crm using BDOC possible or not

Hi all,
I need to upload data from excel to crm(opportunity management) .is it possible using bdoc or not. Please provide the list of methods to upload data from EXCEL and also provide the best method for this scenario .

BDocs are used to transfer data from one SAP system to another like from CRM to ECC or R3.
If u want to upload data from excel to CRM, this can be done with the help of idocs and not bdocs (method 1 - using LSMW).
Take help of a crm technical consultant and define lsmw projects. The project will take care of field mapping and conversion. Once that is done, 4 steps need to be done.
1. Read data
2. Convert data
3. Generate idocs
4. Post idocs
Once the posting of idocs happen error-free, the data will be available in crm system.
Another method will be using transaction SECATT.
Here u can define test scripts and record what all activities are done in a transaction. Then define ur test configs which will contain the excel sheet data and then upload the data.
Reward with points if this helps.

Unable to delete data files from my Ipod if used as data storage...

Hello everybody
I bought months ago an Ipod Nano 8GB. I've got an issue when i use it as disk storage i'm not able to sort out. I've checked all the topics but i cannot find any solution.
Example: I use the Ipod with the option "Manually manage music and videos". I put audio and video files on my Ipod through Itunes, then i put also some files on my Ipod as normal data files through my Mac Finder (Easy, i drag VLC, JPG files etc. from folders to my Ipod). The Ipod/Itunes summary page shows (Correctly) the capacity column colored in blue (Audio), video (Purple) and orange (Data). No probs when i transfer data files to another computer.
Problem: when i delete the data files from my Ipod (Through finder) the orange column doesn't disappear (I have no problems if i delete audio/video files via Itunes) and although i've actually deleted all the files if i try to add some other data or videos/music files to my Ipod, Itunes says that there is no space available in my device. It's very strange, i check and double check all the options but eventually i have to restore my Ipod all the times and (Pretty annoying) add all my files again.
It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
It'd be great if someone can help me out as it's very important for me to be able to use my Ipod as disk storage, thanks a lot!

It seems that although i sent my files to the trash bin, Itunes (Fully updated) doesn't recognize the change.
Empty it from the Finder menu or by control-clicking it in the Dock.
(44613)

Problem in data transfer from BW to CRM

Dear Guys,
I am facing one problem when i am tranfering the data from BW to CRM system (using Analysis Process Designer).
When i am transfering data from standard ODS, data has changed properly.
But in custom ODS, data has not changed.
In both part, upto aggregation data has come.
Any thing i have missed out in custom ODS.
Please anybody give inputs.......
Thanks in advance.
Regards,
Vivek.V

Hi Vivek,
There is no special process for this cube load. Just check the job log and check for any short dump in R/3 while running the extractor.
I checked the datasource help link for this cube but there is nothing special mentioned:
http://help.sap.com/saphelp_nw04/helpdata/en/da/f7bc3961d4f339e10000000a114084/content.htm
Bye
Dinesh

Changes are not updated from ECC to CRM How to debug

Hi,
QCs 1140049726 and 1140047459 were updated in P20 system to remove the WBS. This was done per normal P20 process and instructions. P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
CSP still shows these QCs as having a WBS assigned to them. This is incorrect. It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
How to proceed with it. How to debug from ECC to CRM.
Prem.

Hello Prem,
Could you please have a look at SAP note 656823?
This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
Hope this could be helpful.
Best regards,
Maggie

How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

System Status Vs User Status updates from ECC to CRM

Hi Frnds,
    Am facing a problem in Status Management , We have ECC as Backend , When ever we save the order in CRM it is Relicated to ECC thrgh CRM Middleware.
   (I) I have created User Status 'Z' Status Profile in CRM and Assigned that Profile to Status Triggering Business Transaction and to the Transaction Type.
          I have assigned this Status to INProcess and Released , with my 'Z' Status.
I have Maintained the Same User Status Profile in ECC also.
My questions are
1) How can i Maintain the System Status with User Status in ECC (For example in CRM we maintain thrgh Business Transaction ,last field in Status Profile.) ?
2)When ever i change the status in ECC that Status as to be update in the CRM?
        But here Order in CRM is not updated , For example , if i change the status to "COMPLETED" in ECC ,the Status "COMPLETED" is not triggered in CRM.
        Here i need write a BadI or is there any Config settings that i need to Mainatain ??? or anything different approach ??
   Helpful Answer will be Rewarded with Points .
Thanks in Advance
Reagards
Ram

Hello Charitha,
In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
for your RFC destination (ECC).
This would prevent any automatic data flow for this object from R/3 to CRM.
Hope this helps!
Best Regards,
Shanthala Kudva.

Data Flow from BIW to CRM

Hi all,
It is possible to get all data from BIW to CRM.
Scenario: all transaction and master data is maintaining in the external system and all data extracted in to the BIW for reporting can we take data in to CRM server to perform certain activities in CRM.
If possible what setting i have to do in CRM.
Thanks and regards
Apoorva Asthana

HI
using APD we can extracting You must create an analysis process for a data mining method to train a data mining model. The purpose of training a model using historic data is to allow the model to learn from the historic data. The training result can then be used for a prediction or in the operational system. You can create a training process for the data mining methods:
You can transfer the values determined in the SAP BW to SAP CRM and place these values in attributes u2013 essentially business partner attributes in the Analysis Process Designer
pls go through this link
http://help.sap.com/saphelp_nw04/helpdata/EN/6e/86833ceb3d062de10000000a114027/content.htm
thx
vijender

DATA TRANSLATION FROM GAAP TO IFRS USING BFC STARTER KIT

Dear All,
1.Does the Starter Pack provide data translation from GAAP to IFRS especially when the underlying GL is a non-SAP GL?
2.What are the specific u201CAutomated controls, business rules and calculationsu201D that are performed in the starter kit as stated in the presentation?
3.For banks not using SAP ERP, what combination of SAP solution will you advise that they take and why, if they must beat the January 1, 2012 deadline.
4. Where SAP GL is in place, what relevance will the IFRS Starter pack provide?
5. Can't I just build a universe in BOBJ to do the data translation from GAAP to IFRS and display the report in the IFRS format?
Thanks for your advice

Hi and sorry for the late answer.
You may find answers to your questions in the paper about "IFRS adoption in consolidated statements with BOFC".[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/30effe30-6c44-2d10-c48a-fb26102b0bf6]
Be aware that BOFC is a consolidation product, it doesn't cover the same areas as the GL.
Regards
JF
Would you need further information, or real-time update on all new IFRS/XBRL assets for SAP BusinessObjects solutions I would recommend you join the following social media:
- Facebook http://www.facebook.com/sapifrs
- Twitter http://twitter.com/SAP_IFRS_XBRL
- LinkedIn http://www.linkedin.com/groups?mostPopular=&gid=1851849

Data updation from R3 to CRM using CRM_DATAEXCHG_BADI.

Similar Messages

Maybe you are looking for