Data value changes not always reflected in .jsp code

For example, I can change the data value of an output text field, run the project and find that the new value is not always what shows up. I get the old value instead. I have to then go into the .jsp code and modify the value= property to get the new text to display. The new value, however, was being displayed in the designer window. I can also change a form name or some other component ID and the .jsp code may still contain references to the old name as well as the new name. This causes runtime exceptions. I am new to Java programming . Anyone know what I am doing wrong? I am using the 30-day eval version of Creator. I have tried the referesh, build only , etc., but still run into problems.

Hi,
Could you please list some steps in case there's a bug
and include the jsp source.
Also, I suggest you to get the latest updates.
Choose Tools->Update Center
John
JSC QA

Similar Messages

NB550D - battery icon does not always reflect the proper balance of time

I have just recently purchased an NB550D and I must say that at the outset I am very happy with it. It does tend to be a bit slow but I can live with that.
My problem however is that the battery icon does not always reflect the proper balance of time. For instance after a full charge it may show 9 hours remaining but after a shutdown and restart it will may show 75% and 3 hours remaining. If I shut down and restart it may show 75% and 6 hours remaining
When I first started the unit I allowed it to fully discharge (through use) three times as was suggested by the salesman at the store but quite candidly it doesn't seem to have made one scrap of difference!
Any advice will be appreciated.
Regards

Remaining time is not credible value of the battery state - it depends on actual duty of processor and the program wich estimates this sometimes shows wrong that time or corrects this after a while. Percentage of charge of battery is much better factor to use!
But in case your battery loses from 95% to 75% after restart indictates that's something wrong with the battery or program... In my NB550D after restart (pause for 1 day) the battery loses only 2-3% .

How to tackle the dataflow problem when Value Change event always triggers after another GUI event

We know that Value change event always triggers after another GUI event. Eg, the user modifies string control, the user clicks on a boolean control. Then event boolean clicked is triggered before event string control value change.
Now suppose somehow the GUI event that must happen to subsequently trigger the Value change event can potentially affect the data that Value change event is supposed to work on. How can we tackle this problem ?
For example, in a mockup application that the grand purpose is to have user entered values in a textbox logged to a file (no missing information is accepted, and there is a boolean to determine how the information is logged).
There are 2 controls, boolean A when clicked (mouse down) will load random number in text box B. Text box B is designed with event structure VALUE change which saves whatever values user enters into text box B to a log file.
There are 3 problems when instead of clicking anywhere on the front panel after modifying text box B, the user ends up clicking on boolean control A.
1. Event mouse down on Boolean control A will execute first, modifying text box B content before the user entered values in B get saved.
2. The value of boolean A can potentially affect how textbox B is loggged.
3. The value of boolean A affects how the file is logged and this is indeterminate. Somehow when running this VI with no Highlighting, the textbox B Value change event executes -before- boolean A value is updated (F to T). When running this VI with Highlighting, the boolean A value is updated (F to T) (because we click on it) -before- textbox B value change event occurs. Why is it like this ?
Now the situation I made up seems non-sense, but I believe it resembles one way or another a problem that you might run into. How would you solve this problem elegantly ?

You can set the string control to "update while typing".
Are you sure appending the log to itself is reasonable? Wouldn't it grow without bounds if the users keeps entering strings or pressing the ingore button?
Why isn't the "constant" a diagram constant instead of a control. Is the user allowed to change it?
To reset just write empty strings or a false to local variables of the controls (renit to defaults" seems a bit heavy handed).
All you probably need is a single event case for "ignore:value change" and "String" value changed", no need for the local variable..
Also add a stop button and an event for it.
You don't need the timeout event.

Fiscal year change not yet made for company code

1. We have opened new company and enter data from FY 2009. All posting has happened properly, but when we are trying to see report S_ALR_87011963 we are facing following problem.
We have already check everything on SDN and followed, but our problem still exists.
Table T093C is showing as FY 2009 year and also same in OB52, OAAQ is showing 2008 as closed year. We have run AJRW for 2009 and it runs successfully.
error -
Fiscal year change not yet made for company code ABCD
Message no. AB059
Diagnosis
You have not yet carried out a fiscal year change for company code ABCD, although the current system date is in the new fiscal year.
Procedure
Carry out the fiscal year change for company code ABCD.
2. We are running AFAB in any mode we get following error.
Only an unplanned posting run is possible in this fiscal year.
Message no. AA693
Diagnosis
You have already posted in fiscal years that come after 2009. This means that you can only post in the last posting period 012 in fiscal year 2009. Or you can post to a special period, if one is set up. Since you have not posted yet in this fiscal year, you must specify that the depreciation posting run is unplanned.
Procedure
Please check the fiscal year entered. If you are certain you want to post to fiscal year 012, you must start the depreciation posting run in the last posting period (or in the special period). Be sure to indicate that this posting run is unplanned, since it falls outside of the normal posting cycle.

Hi Experts,
I am not making a new post regarding this but I hope you can help me answer.
I am experiencing the same issue as the one posted originally and here are my data.
1. Running the same asset report
2. System is currently in FY 2013
3. OAAQ shows FY 2012
4. SE16N > T03C shows FY2013
I have tried running AJRW again but I am getting the same error in the asset report. I hope someone out there can help.
Thanks,
Josef

Fiscal year change not yet made for co. code

hi,
while viewing the asset balance report, system is throwing 'fiscal year change not yet made for co. code'. However in T.code AJAB, system is showing no error in log. While executing in background & checking in sm37, in spool the system showing 'dep. not done completely for an asset'. However, the asset is AUC & in master data the dep. key is 0000.
Kindly help me out as it is very critical because user cannot able to post it.
Regards,
surendra

Hi
Even though you finished the AJRW, you need to change the Date of Legacy Data Transfer in this view
V_T093C_08 (Please use SE11 transaction code -
select view radial button and give this view V_T093C_08 and select display -
execute accordingly ex: 31/12/2008 for 2009 )
Let me know for any issues
Regards,
Suresh

New field in ODS - data value does not flow after activation

Hi,
We have an ODS with some data in it. Now i added a new key figure to the ODS and changed the transfer and update rules accordingly.
The value for this key figure appears in the PSA and the ODS table *40 (before activation table), but after activation the value does not flow to the activated ODS table *00.
Any idea why this is happening?
Pl let me know.
Regards,
Pradhiba

Hi Pratibha
I did not found anything wrong with key figure 0OI_WRBTR in BW system.
Please check the contents of active table in *00 table using SE16 and also using tcode LISTCUBE.
I hope you are not selecting wrong key figure while looking at active data of ODS.
Regards
Pradip

Date value is not loading

hi,
i am using filelayout to load the date from csv file to staging tables.csv file contains data like emplid,firstname,lastname,compnaycode,joining date etc..
the problem what i am facing is all fields are loadin except that joining date.i dont know why its not loading.plz help me in this
thank in advance
ragards
karthik

Date is always a problem in application engine. You need to convert date to PeopleSoft date format using %DateOut and %DateIn functions etc. Try using those functions when you are loading date values from CSV file to peoplesoft tables.
Jayaprakash Tedla

Reg: View changes not getting reflected

Hello All,
I made some view changes like field mapping for the Family Dependents view.
I Created the Activity and deployed using NWDI but the changes are not getting reflected.
Please assist me in resolving the issue.
What might have gone wrong? and how to solve the problem.
Thanks in advance for the time.
Regards,
Pramod

The issue is with the activities queued up in TCS Deployer.
Rerun the TCS deployer and the issue is solved.
Thanks,
Pramod

Event Structure's value change, not detecting changes when tabbing thru array of clusters

Hi! I have an array of clusters (int, int, string, int) control, and want to detecting changes made to the it. I used the Event Structure's value change case on the array, it works excellent except that it'll only detect the changes when you click out of the element or press the enter key (the one by the numbers, not carriage return). I want it to detect the changes when I tab thru the cluster or array too, but I can't figure it out... Does anyone have any ideas?
Thanks!

mfitzsimons wrote:
altenbach
Tried Value Change with my example done in 7.1 and it doesn't trgger an event. That is why I suggested Mouse Down.
Curious. I did a few minor edits in 8.0 before saving as 7.1, but the simple value change event got triggered just fine when the value vas terminated with a tab in 7.1. Every time. Strange....
Are you on 7.1 or 7.1.1? Maybe there's a difference (I am using 7.1.1).
LabVIEW Champion . Do more with less code and in less time .

STDMES field in EDI _DC40 value is not getting reflected in SAP R/3

Hi All,
We have a EDI to IDOC scenario.
In message mapping we are hardcoding EDI_DC40\STDMES = 812 in message mapping and in sxmb_moni in PI we can see this value getting populated in xml message but at SAP end in we02 it is blank.
Value is not getting populated in SAP.
Could you please provide inputs on this?
Thanks in Advance
Best Regards,
Harleen Kaur Chadha

Hi Harleen,
Please check Note SAP Note Number: 1331571 : IDoc adapter: Value STDMES is ignored
Regards,
Vikrant

URGENT PLEASE HELP!!! jsp changes not geeting reflected

Hello all,
I am very new to java/jsp.
I have a jsp file, which was working till I made changes . I made changes to it like changing the title. I complied it, and compiled with no errors. I deployed it in a remote server . cleared the cache of the server and bounced it. When I test it it doesn't reflect my changes.
please provide some suggestions .. what should i do..
thanks in advance.

I understand that it should be able to detect the change and recompile . but still the problem persists... Try using a complete refresh in the browser (ctrl+F5) so that it reloads everything.
It determines if a JSP needs to be recompiled by looking at the date/time of the jsp.
Make sure that the time of the JSP is recent, otherwise it doesn't bother to recompile it. Can occur if the server machine and your own machine have different times set.
What server are you using? What version?
Where are you putting the JSP file?

Master Data Attribute is not getting reflected in the Cube?

Hi All,
I have loaded the data from ODS to the cubes for customer master and it contains a lot of navigational attributes
for instance :
master data for customer in development is
customer customer group 5(nav attributes) Customer pricing group
1001 HAW IE
And hence when i load the customer 1001 from the ods to the cubes i can see the customer contains navigtional attributes for customer pricing group but CUSTOMER GROUP5 doesnt gets displayed in the cube.
I check the master data it contains the values for customer group. How to Rectify this issue?
Pls advise me!!
Thanks
Pooja

hi all,
I have explicity clicked on the navigational attributes in the cube i can see the values for the other navigational attributes being displayed in the cube for customer master but then only one navigational attribute is not getting displayed.
For instance
customer, customer gp2, customer grp5
100, nr, nv
only customer grp5 is not getting displayed which has values in the master data but then customer grp2 along with customer is getting displayed.
Thanks
Pooja

Points on axis of a XY Graph: programatically changing not always working

I have a minor issue:
Users can view data in my app, and in the academic world its usually appreicated if you have divided your X and Y axis in 6-7 points max.
So I use the appropriate property nodes for start of range, increment, minimum and maximum value. I dont need a minor increment.
However, Labview is still going its own way showing about 20 points on the Y axis!! To make it worse, sometimes it works, sometimes not.
Now I figured there must be a specific order in which I should execute the property node or do something else to make it work better.
Im on LV2010 btw. Thanks

Can you post your code for us to look at?
Tim
Johnson Controls
Holland Michigan

Data values do not save

Hi,
When I input data in a data form and save it, the message "The data has been saved" is displayed but the values disappear from the data form and are not stored in Essbase.
What might be the reason?
I am on Planning 9.3.1.
Thanks

Hi,
This has been covered a few times recently.
Have a read of these
Problem saving data on form
Data not getting saved from forms
Cheers
John
http://john-goodwin.blogspot.com/

Posting Date in 2LIS_04_P_ARBPL not always filled

Who knows a solution to the following issue:
The posting date (BUDAT) is used for assigning production order data (work center view) extracted with 2LIS_04_P_ARBPL to reporting periods in BW reporting.
When testing the extraction with 2LIS_04_P_ARBPL, the field "BUDAT" is only rarely filled. (AFRU-BUDAT is filled for the concerned orders). Therefore period reporting is not possible.
What could be the reason for the missing BUDAT, i.e. when does the extract structure MC04P_0ARB provide a posting date? What are the conditions which need to be fulfilled in ECC system before extraction?
Any hint for resolving the issue will be appreciated!
Edited by: Elisabeth Liberda on Oct 9, 2008 2:39 PM

Hi,
Most of the times data won't fill in the base tables, because the reason is, at the time of data entrry by users, there are certain conditions , so until and un less all that conditions fullfill, then only all feilds will fill in the base tables. I faced the same problem for 2lis_04_p_matnr datasource, I'm not getting Batch, so I enhaced teh datasource. So better add ZZ feild to datasource and enhace the ds based on AFUM table (Based on the process order)
Thanks
Reddy

Data value changes not always reflected in .jsp code

Similar Messages

Maybe you are looking for