Database 9201 & 9iAS 10222 on Solaris

Dear all,
We have Oracle EE 9.2.0.1 installed on Solaris 9. In another ORACLE_HOME on the same server , I am installing 9iAS 1.0.2.2.2. As per Metalink (issue 378799) , I have applied the JDBC patch and modified the O7_DICTIONARY_ACCESSIBILITY to TRUE.
The problem is that when launching the Portal installer , the first step is to connect to the origin database (the 9.2.0.1) which uses JDBC style connection, this is not working at all.
Note , the JDK 1.1.8 is used when luanching the Portal configuration assistant.
Any help?

I saw a reference on metalink about a patch. But, I do not know if it is the same patch that you have already installed.

Similar Messages

Diff between Oracle 9i database and 9ias application server.

Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

Hi,
Your question is the answer. Oracle9i Database manages all your eBusiness data and Oracle9iAS runs all your eBusiness
applications. In a 3 tier architecture, Oracle9i Database fits in the Database tier where as Oracle9iAS fits in the middle
tier. Oracle9iAS provides an infrastructure to run different types of applications(J2EE thru OC4J, Forms applns, Portal
based applns, Wireless applns etc..)
Cheers !
-- Rajesh
Can any one brief in detail the difference between Oracle 9i database and 9ias application server.

I want to know the ways of connecting 9iAS to Database and clients to database through 9iAS as middleware.

My question was about the necessity of implementing OID or any other version of LDAP.
We have a new 9iAS and 8.1.7 database implementation and i have a doubt about their networking architecture.
I want to know the ways of connecting 9iAS to Database and clients to database through 9iAS as middleware. We are debating if OID is compulsory or if we can go ahead with this implementation with out OID.
Can you please help me and provide me couple of implementation designs(i.e connecting clients to database through 9iAS). It would be great if any one can provide me the implementation's with and with out OID.
-Thanks

Hi ,
For all delta and full DTP loads you can get information in table RSICCONT .Check table RSMONICDP this will give you detail information .Here you will get all the information with timestamp and request id .
Hope these tables will serve your purpose .
Regards,
Jaya

How can I create a Standby Database going from AIX to Solaris

Hello All,
I need to create a read-only replica of my Oracle 9i database on AIX to a 9i or greater database on Solaris. The replica must recieve the changes to the master database on an interval. The standard DataGuard solution does not support mixed operating systems.
Is there another way to create the replica? I would prefer not to create triggers on the master tables.
Your input is appreciated.
Thanks

Hi,
If you just wants to have replication, try materialised view. Hope this will work.
Regards
Jomo

Prerequisite check of database instance installation failed on Solaris

Dear All,
Please provide your valuable suggestions in resolving the below issue
We are installing the SAP NW 7.4 EP as distributed installation
Application server on RHEL 6 and Oracle database on Solaris 11(SPARC).
We have installed the SCS instance on RHEL with out any issues.
While running prerequisite check of database installation on solaris we are getting below errors.
"Atleast 500MB of free disk space are required for an diagnostic agent installation"
                 and
"could not evaluate condition obsolete kernel parameters"
In the sapinstdev_log file we are getting below lines.
TRACE
Found 0 MB of free space on /dev
TRACE
Prerequisite Checker performing checks: Condition hardware::disk_space from package ::j2ee_smd_inst evaluated to PRCCondEvalResult.FALSE. Message: 'At least 500 MB of free disk space are required for an Diagnostics Agent installation. Found 0 GB.'.
We have tried to increase space for /dev which is not possible in Solaris (As per the OS team).please find the below reference link.
/dev and the /devices Namespace (System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle S…
The/dev file system is loopback-mounted into the zone using a read-only mount.
Please find the file system created for database instance installation.
Filesystem             Size   Used Available Capacity Mounted on
rpool/ROOT/solaris      29G   973M        28G     4%    /
/dev                     0K     0K         0K     0%    /dev
rpool/ROOT/solaris/var
                        29G    49M        28G     1%    /var
proc                     0K     0K         0K     0%    /proc
ctfs                     0K     0K         0K     0%    /system/contract
mnttab                   0K     0K         0K     0%    /etc/mnttab
objfs                    0K     0K         0K     0%    /system/object
swap                    30G   1.5G        29G     5%    /system/volatile
sharefs                  0K     0K         0K     0%    /etc/dfs/sharetab
fd                       0K     0K         0K     0%    /dev/fd
swap                    30G   1.5G        29G     5%    /tmp
rpool/VARSHARE          29G    40K        28G     1%    /var/share
h2hpool1/Dump           40G   9.2G        31G    23%    /Dump
rpool/export            29G    32K        28G     1%    /export
rpool/export/home       29G    32K        28G     1%    /export/home
rpool/export/home/admin
                        29G    34K        28G     1%    /export/home/admin
h2hpool1               244G    31K       235G     1%    /h2hpool1
h2hpool1/oracle        180G    36K       180G     1%    /oracle
h2hpool1/oracle/EPD    180G    44K       180G     1%    /oracle/EPD
h2hpool1/oracle/EPD/112_64
                        10G    31K        10G     1%    /oracle/EPD/112_64
h2hpool1/oracle/EPD/mirrlogA
                       1.0G    31K       1.0G     1%    /oracle/EPD/mirrlogA
h2hpool1/oracle/EPD/mirrlogB
                       1.0G    31K       1.0G     1%    /oracle/EPD/mirrlogB
h2hpool1/oracle/EPD/oraarch
                        20G    31K        20G     1%    /oracle/EPD/oraarch
h2hpool1/oracle/EPD/origlogA
                       1.0G    31K       1.0G     1%    /oracle/EPD/origlogA
h2hpool1/oracle/EPD/origlogB
                       1.0G    31K       1.0G     1%    /oracle/EPD/origlogB
h2hpool1/oracle/EPD/sapdata1
                        30G    31K        30G     1%    /oracle/EPD/sapdata1
h2hpool1/oracle/EPD/sapdata2
                        30G    31K        30G     1%    /oracle/EPD/sapdata2
h2hpool1/oracle/EPD/sapdata3
                        30G    31K        30G     1%    /oracle/EPD/sapdata3
h2hpool1/oracle/EPD/sapdata4
                        30G    31K        30G     1%    /oracle/EPD/sapdata4
h2hpool1/oracle/EPD/sapreorg
                       2.0G    31K       2.0G     1%    /oracle/EPD/sapreorg
h2hpool1/oracle/client
                       1.0G    31K       1.0G     1%    /oracle/client
h2hpool1/oracle/stage
                       5.0G    31K       5.0G     1%    /oracle/stage/112_64
rpool                   29G    31K        28G     1%    /rpool
h2hpool1/sapmnt         20G    31K        20G     1%    /sapmnt
h2hpool1/usr            20G    31K        20G     1%    /usr/sap

Hi Praveen,
It looks to be more permission issue rather than space issue. Ensure the file system where you copied the DVD has full permission.
Check the installation logs for more details on which other file system needs full permission and work accordingly.
Regards,
Deepak Kori

Installing Oracle 9i Database and 9iAS on the same machine

I have read conflicting comments about this. Will Oracle 9i and 9iAS work if installed on the same server ?
I have seen a note before that the ORACLE_HOME will conflict if done.
However, for 8i it has been stated "the OAS does not seem to conflict with the Oracle 8i database, so select the default ORACLE_HOME to install".
Can you give me the diffinitive answer for 9i for this.
Many Thanks

I performed the installation and used a different Oracle_Home and had no issues. Now configuring Portal was another story...

9iAS for Sun Solaris Intel?

Will 9iAS be available for Sun Solaris Intel?
Thanks,
Shane

Shane,
Due to bandwidth/space limitations, there are no plans at this time to put the Intel Solaris version of 9iAS onto OTN.
That said, the Intel Solaris version of 9i AS will be available through the following channels:
1) Ordering directly from the oracle store at store.oracle.com, or via your local Oracle representative.
2) If you have a previous version of iAS for intel solaris (with a support contract), you could request an upgrade via Oracle Worldwide support, and they will send you the software.
Best Regards,
Harry
null

How to migrate Single instance database on RAC. OS - Solaris Sparc

Dear Team,
We are planning to migrate our single instance databases on multi instance environment which is RAC on Solaris 10 sparc server.
Will you please help for migration steps and database feasibility for the same.
Oracle database version - 11.2.0.1
OS - Solaris 10 sparc
Thanks in advance.

Hi,
You can also look at this link which caters for 11gR1 as well though title say 10g,
How to Convert 10g Single-Instance database to 10g RAC using Manual Conversion procedure (Doc ID 747457.1)
HTH,
Pradeep

Which http server shall I use, 9i database or 9ias

Shall I keep the apache http which followed the database, or should I delete it and install the one that comes with 9ias. The only thing i know is that i cant have both.....
please help !!!!
Sindre

I you have 9ias up and running I should suggest that you use the Apache of 9ias because then you could also use the other products of 9ias like forms&reports listener, discoverer, wireless, J2EE, ...
You don't have to deinstall the Apache of the database,just set the service on "manual".

Installing 9iAS on Sun Solaris 5.7

Hi,
I am trying to install 9ias on SunOS 5.7. We have a 8i database up and running
on the boxalready. During the 9ias installation, we entered a separate
oracle_home, for a new instance we created. After, a dialog box poped up and
asked me to open another terminal and login as root to run root.sh in that
terminal- what I want to know is what will this root.sh script do to my
existing(original)oracle_home, environment variables, .profile etc.?
Your help is much appreciated.
null

You can read the root.sh script in your 9iAS home (copy below). Make sure that when root is logged in the ORACLE_HOME gets set properly so the CHMODs etc act in the correct directories.
John H.
#!/bin/sh
# the following commands need to run as root after installing
# the OEM Agent. They take care of fresh installs as well as
# in-place upgrades from earlier versions.
RMF="/bin/rm -f"
CHOWN="/bin/chown"
CHMOD="/bin/chmod"
TEST="/bin/test"
ECHO="/bin/echo"
ORACLE_HOME=/Apps/oracle/9iAS
ORACLE_OWNER=oracle
# change owner and permissions of the dbsnmp executable
$CHOWN root $ORACLE_HOME/bin/dbsnmp
$CHMOD 6750 $ORACLE_HOME/bin/dbsnmp
# remove all previously created log and trace files
$RMF $ORACLE_HOME/network/trace/dbsnmp*.trc
$RMF $ORACLE_HOME/network/trace/oratcl*.trc
$RMF $ORACLE_HOME/network/log/dbsnmp*.log
$RMF $ORACLE_HOME/network/log/nmiconf.log
$RMF $ORACLE_HOME/bin/dbsnmp0
$RMF $ORACLE_HOME/bin/oemevent0
$RMF $ORACLE_HOME/bin/oratclsh0
# remove previously created pkgIndex.tc file
$RMF $ORACLE_HOME/network/agent/library/pkgIndex.tcl
# remove previously created snmp_ro.ora file
$RMF $ORACLE_HOME/network/admin/snmp_ro.ora
$RMF $TNS_ADMIN/snmp_ro.ora
# adjust owner of snmp_rw.ora
if $TEST -f $ORACLE_HOME/network/admin/snmp_rw.ora
then
$CHOWN $ORACLE_OWNER $ORACLE_HOME/network/admin/snmp_rw.ora
$CHMOD 660 $ORACLE_HOME/network/admin/snmp_rw.ora
fi
if $TEST -f $TNS_ADMIN/snmp_rw.ora
then
$CHOWN $ORACLE_OWNER $TNS_ADMIN/snmp_rw.ora
$CHMOD 660 $TNS_ADMIN/snmp_rw.ora
fi
# adjust owner of the agent queues and other associated files
$CHOWN $ORACLE_OWNER $ORACLE_HOME/network/agent/*
$CHMOD 770 $ORACLE_HOME/network/agent/*
$CHMOD 750 $ORACLE_HOME/network/agent/jobs
$CHMOD 750 $ORACLE_HOME/network/agent/events
$CHMOD 750 $ORACLE_HOME/network/agent/config
$CHMOD 750 $ORACLE_HOME/network/agent/library
$CHMOD 750 $ORACLE_HOME/network/agent/tcl
$CHMOD 750 $ORACLE_HOME/network/agent/mibs
$CHMOD 750 $ORACLE_HOME/network/agent/jobs
$CHMOD 777 $ORACLE_HOME/network/agent/jobout
$ECHO "IMPORTANT NOTE: Please delete any log and trace files previously"
$ECHO " created by the Oracle Enterprise Manager Intelligent"
$ECHO " Agent. These files may be found in the directories"
$ECHO " you use for storing other Net8 log and trace files."
$ECHO " If such files exist, the OEM IA may not restart."
null

9ias 10222 and Portal 30985

I'm running 9ias r1 and Portal. I'm trying to tweak it so that when a user changes their password, the user cannot use the previously used password. So when a user changes their password, they have to use a password that is different than the one they used previous to the current. Does anybody have any ideas for me?

I'm not aware of a publicly available portlet for Oracle9iAS email as of yet.

SAP Oracle database 11.2 migrating from Solaris to RedHat Linux (x86_64)

What is SAP guidance on database migration ? What is the best approach ?
I heard person who does migration has to be certified by SAP.

Jun He wrote:
Thank you for prompt response. When you say "heterogenous system copy" does not support it, do you mean SAP does not support the converted system or just the process itself ?
>
> Actually I am discussing with SAP about generating a system copy to send over to SAP and they said that Data Pump is an option they can accept. If Datapump is accepted by SAP internally, I would think after migration SAP should support datapump-migrated system.
Hi Jun,
I didn't said that SAP will not support your system, after the migration by Oracle data pump. I noted that OS/DB migration is performed by heterogenous system copy with the migration key.
Under this circumstance, if they accept to support you during the migration process with data pump, there's no problem. As I noted that previously, technically it is possible to migrate the system by using data pump, but I didn't requested that kind of support to SAP. I've been surprized to hear that they will support migration with Oracle data pump method. This is my own assestment.
Will they support you, if you face with a problem during the migration with data pump? Or some other problems you may be face after you go to productive, because of this migration?
>> When you say "heterogenous system copy" does not support it, do you mean SAP does not support the converted system or just the process itself ?
I mean that SAP does not support just process itself and the problem you face because of this migration.
Best regards,
Orkun Gedik
Edited by: Orkun Gedik on Jun 29, 2011 11:11 PM

How to install 9i Database (Rel2) & 9iAS (Rel2) both on the same box

Can anyone tell me what should be the right way to install both the Oracle9i rel2 Database and Oracle9iAS rel on the same box. I need to do this for demo reasons. I am aware of the performance issues involved.
TIA
Rob Zoeteweij

Can anyone tell me what should be the right way to install both the Oracle9i rel2 Database and Oracle9iAS rel on the same box. I need to do this for demo reasons. I am aware of the performance issues involved.
TIA
Rob Zoeteweij Rob,
The following is the recommended order of installations for Customer Database (backend DB), Oracle9iAS and Oracle9iAS Infrastructure:
Step 1: Install and configure customer database.
Step 2: Install and configure Oracle9iAS Infrastructure. (apply patches if necessary)
Step 3: Install and configure Oracle9iAS middle tier installation.
Step 4: Perform appropriate post install steps to configure middle tier components with the customer database.
HTH,
Ashesh Parekh
Oracle9iAS Product Management

Oracle database software on Intel based Solaris

Hi all,
Any idea regarding Oracle 8i/9i software on Intel based Solaris.
Can I use Oracle 8i Sparc Software for Intel based Solaris?
Thanks

HI Kandi,
Apparently due to a lack of demand, Oracle software on Solaris Intel is being phased out. Unfortunately, you can't use Solaris Sparc releases on Intel platforms.
regards,
Stewart

Database for 9iAS v2 Question

Has anyone tried to do the install of the Linux version (middle tier piece) with the 9i database on a 2000 box?
Want to keep the 3 pieces seperate (usually easier that way)....or will I have to install the database (portal repository, etc) on the same box as the middle-tier?
Thanks in advance
Dennis

Pavana,
Thanks for the info.
Here is what I am working on for my v2 installation:
Infrastructure machine (SuSE Linux) is up and running with patches installed.
Second machine has Win2k and a 9.0.1.1 database installed (planning on using this for the portal,
unified messaging, etc)....(customer database per the docs).
Third machine (SuSE Linux) is going to be the middle-tier box for v2.
Is this setup going to work ok, or will I have problems with the database version on the Win2k box? There are no patches specifically for the database on the Middle Tier install but.....
I can always install the 'customer database' on the Middle Tier box if I have to but would prefer to keep all seperate, much cleaner. If I do have to install the database on the Middle Tier box, are there any patches that have to be applied to that Home in addition to the 9iASv2 Home?
Thanks,
Dennis

Database 9201 & 9iAS 10222 on Solaris

Similar Messages

Maybe you are looking for