Database dependences with collaboration or infra ?

hello, this is the situation
We have the database 10g on a linux server (#1),
on another server (#2) we have:
-a collaboration suite installation working fine since 2005
-Oracle Infraestructure
-Oracle IAS
Now we bought a third server(#3), and installed a new database 11g to migrate our data from 10g, application works fine with 11g. there is no problem.
Our goal is to clean the first server to install a weblogic server.
but the PROBLEM is that when the first server with the old database is down (we turned it off) the collaboration suite does NOT START. especifically the email proceses.
so until we start this database, the email and rtc proceces starts good.
it looks like there is something in collaboration suite that is connected with this database, and we need to know that and if we can redirect this to the new 11g.
any idea?
thanks in advance.

toga wrote:
hello, this is the situation
We have the database 10g on a linux server (#1),
on another server (#2) we have:
-a collaboration suite installation working fine since 2005
-Oracle Infraestructure
-Oracle IAS
Now we bought a third server(#3), and installed a new database 11g to migrate our data from 10g, application works fine with 11g. there is no problem.
Our goal is to clean the first server to install a weblogic server.
but the PROBLEM is that when the first server with the old database is down (we turned it off) the collaboration suite does NOT START. especifically the email proceses.
so until we start this database, the email and rtc proceces starts good.
it looks like there is something in collaboration suite that is connected with this database, and we need to know that and if we can redirect this to the new 11g.
any idea?
change collaboration suite

Similar Messages

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

Database selection with invalid cursor !

hi experts,
When execute SAP BW processchar, it occur some system error: (sm21)
Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed).
this error occur when apply bw support package 19.
sap notes 1118584 Solution is: Import Support Package 17 . but my support package is 19.
how can i solve this error?
thanks,
xwu.

I am only assuming things, but it might be worth to look closely if you were experiencing an ORA- error during the execution. This could have caused a rollback and thus closed the cursor. Please check the job log, the workprocess trace (dev_wX file) and the system log SM21 and ST22 as well.
Besides that check the oracle alertlog and the usertrace destination.
Best regards, Michael

Database selection with invalid cursor with MaxDB database

Hi Experts,
I encountered the this error:
"Database selection with invalid cursor
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed)."
We are using bw support package 19 early this month. Previously is working fine but this problem occured from the last 2 days.
We are using MaxDB database.
Really appreciate any speedy responds.

Hi,
We finally resolved the issue.
The solution:
We check the RFC connection test in SM59. There are connection error.
There is an error that related J2EE_ADMIN user.
SO we reset the J2EE_ADMIN id in SU01.
The problem goes away.
Many thanks

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

Database selection with Invalid Cursor error in RSDRI_INFOPROV_READ

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

Hi Everyone.
I am using RSDRI_INFOPROV_READ Function module for reading data from a multiprovider.
Logic of the code is as following
while <more data>
CALL RSDRI_INFOPROV_READ reading data in E_T_DATA
Append lines of E_T_DATA to EO_T_DATA.
If total lines of data in EO_T_DATA > 200000
<save EO_T_DATA in a file using GUI_DOWNLOAD>
<clear EO_T_DATA>
EndIF
EndWhile.
As soon as number of record exceed 200000 first file is saved, but after that next data call results in error.
Error says "Database selection with invalid cursor".
I suspect that this because of call to FM GUI_DOWNLOAD. While calling this FM after RSDRI_INFOPROV_READ causes system to commit and again the cursor is tried to open in next call casuing it to fail.
But it is imperative for me to save data in file at regular intervals as data volume is huge.
Any pointers in this direction will be helpful.

How can I use an Express database build with RAA in Express Objects???

Hello, everybody!
I have installed Express Server and Client on my computer. I've build an Express database With Relational Access Manager mapping data from an Oracle database.
Now I want to use this express database in Oracle Express Objects.
I understand that an express database build with understand can be used by defining a connection to Express Server and using the option Relational Access Manager Connection.
But, I didn't understand the settings of this option. I open the settings window and there it is :
- the MASTER DATABASE Box where I have to write the name of the CUBE from the express database build with understand?
- the RDC File Box : what do I have to write here? I've read the HELP but I didn't understood. There is no file with the RDC extension in my computer.
Thank you for your help!
Anca.
[email protected]

you can extend it, very easly, with an Airport Express.
once you connect the AExpress, on the App Airport Utility, in Wireless tab choose to "Extent a Network", you will be able to select your Network enter your Network Password and it is done
i have 2 AExpress to extend my signal and also to Airplay to Remote Speakers and works perfectly
good luck

Using database link with a dynamic SQL in Forms 5

I have a Form 5 application where a database link is specified in a client version of dynamic SQL. The function that the application is designed to perform is to access data in a table in a remote database and use it to populate another table in a local database with the same structure as the source table. Dynamic SQL is used because the name of the table can only be resolved during run time.
The problem is that it gives error with code 'ORA-03113' and text 'End-of-file on communication channel' when you try to run it.
Is it not possible to use a database link with a dynamic SQL? What can I do to overcome the problem ?

Try to create a local view based ao the remote table and use the view.

Lync 2013 Error - Certificate could not be published in the database associated with User Services Cluster

Hi Lync gurus,
I have a weird issue:
Just installed a Lync Standard 2013.
Everything works except I keep getting this error in Log: every 30 minute or so.
First an Error: Event 47067
A server did not respond to HTTP request
Server lyncserver.domain.local did not respond to HTTP request PublishCertRequest targeted at
https://lyncserver.domain.local:444/LiveServer/UserPinService.
Cause: Server might be down or the network path between servers might not be properly configured.
Resolution:
Please ensure that the server can be connected on the target port using telnet and then re-try.
Then I get a Warning: Event 47068
GetAndPublish web service failed.
Certificate could not be published in the database associated with User Services Cluster [lyncserver.domain.local ]. Request Details - Entity: [[email protected]], Device Id: [6BB30A3E-2923-553A-8E5F-0B2FB2CEA330], Authenticated User: [sip:[email protected]].
Additional Context: [Publish_Failure: OtherFailure;HttpNoResponse:"lyncserver.domain.local "]
Cause: This could be due to network connectivity issues with the remote server, or because the database is down.
Resolution:
Please ensure that the user services is reachable and the database is up and running.
Thanks for any help

Please check you can telnet port 443 and port 444 on Lync Front End Serve from client.
Try to regenerate a new certificate for Lync Front End Server.
Check all the services on Lync Front End Server are started.
Check the option “Enable all purposes for this certificate” is checked for the trusted root CA certificate.
For the detailed steps:
Run MMC--Add\Remove Snap-ins--certificates--Local Computer--Trusted Root Certificate Authorities--Certificates, find the Root CA certificate you installed--Properties--General, check the "Enable all purposes for this certificate".
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to select value from database view with * in wher clause

Hi ,
I ahve a database view with some fields.
Now my requirement is to serach a single row on the basis of process type.
Process type can have values like ZBA,ZBC,ZBD,ZBE or similarly anything starting with ZB.
Now i know that starting two letters will be ZB , but dont knwo the last letter.
So how should i use select query for the same?
Should i use like operator for the same?
regards
PG

hi,
u can use character '%'.sample code like this
SELECT reltype
             instid_a
             catid_a
             instid_b
             FROM /dbm/ord_docflow
             INTO TABLE it_link
             FOR ALL ENTRIES IN it_pnwtyh
             WHERE instid_a = it_pnwtyh-instid_a AND
             instid_b LIKE 'QMSM%' AND
             typeid_a = 'BUS2400' AND
             typeid_b = 'BUS2400' AND
             catid_a   = 'BO' AND
             catid_b   = 'BO' AND
             reltype   = 'VONA'.
this is similar to using* while we fetch values from table.in the above code only i no QMSM rest values not sure,so used QMSM%

Rollback in database adapter with delete polling strategy

Hi All,
We have designed a database adapter with "Delete the Rows That Were Read" after read strategy with auto-retry attempts as 5. In BPEL process, where we are receiving the DB records, we are throwing a rollback fault in case of any fault.
Database adapter polling is being re-tried 5 times in case of faults but the data is being deleted from the tables after 5 retries. Is this is the expected behavior of DB adapter? Doesn't the rollback fault rollback the complete transaction and leave the failed data back in the tables?
Can any one provide more information on this polling strategy after the number of auto-retries are completed?.
Thanks.
-Pavan

You need to include your bpel process in the same DB adapter transaction
Use the following properties in the bpel component to do this
<property name="bpel.config.transaction" type="xs:string" many="false">requiresNew</property>
<property name="bpel.config.oneWayDeliveryPolicy" type="xs:string"
many="false">sync</property>
Make sure the connection factory that you are using in the DB adapter is XA transaction enabled

FOD schema installation with tutorial Database Development with JDeveloper

I followed the instruction online at http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html to install FOD schema. Errors displayed when call "run ant target -> buildall" were below:
populateImages:
[java] 2010-9-26 14:56:01 oracle.as.jmx.framework.LoggerHelper log
[java] SEVERE: Error initializing the JMX FRamework SPI "oracle.as.jmx.framework.standardmbeans.spi.JMXFrameworkProviderImpl"
[java] java.lang.reflect.InvocationTargetException
[java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[java]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[java]      at java.lang.reflect.Method.invoke(Method.java:597)
[java]      at oracle.as.jmx.framework.PortableMBeanFactory.initializeSPI(PortableMBeanFactory.java:1895)
[java]      at oracle.as.jmx.framework.PortableMBeanFactory.initializePlatformSPI(PortableMBeanFactory.java:1851)
[java]      at oracle.as.jmx.framework.PortableMBeanFactory.init(PortableMBeanFactory.java:1831)
[java]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:207)
[java]      at oracle.as.jmx.framework.PortableMBeanFactory.<init>(PortableMBeanFactory.java:215)
[java]      at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
[java]      at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
[java]      at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
[java]      at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
[java]      at java.lang.Class.newInstance0(Class.java:355)
[java]      at java.lang.Class.newInstance(Class.java:308)
[java]      at oracle.mds.core.MDSInstance.lookupMBeanServer(MDSInstance.java:2061)
[java]      at oracle.mds.core.MDSInstance.checkMDSDeployStatus(MDSInstance.java:950)
[java]      at oracle.mds.core.MDSInstance.<init>(MDSInstance.java:1692)
[java]      at oracle.mds.core.MDSInstance.<init>(MDSInstance.java:1666)
[java]      at oracle.mds.core.MDSInstance.findAndStoreMDSInstance(MDSInstance.java:1962)
[java]      at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:507)
[java]      at oracle.mds.core.MDSInstance.getOrCreateInstance(MDSInstance.java:470)
[java]      at oracle.adf.share.config.ADFMDSConfig.getDefaultMDSInstance(ADFMDSConfig.java:436)
[java]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[java]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
But still got message - "BUILD SUCCESSFUL" at the end. Does anyone know how to solve this problem?
My intention of performing FOD schema installation was to follow the tutorial "Database Development with JDeveloper" at http://st-curriculum.oracle.com/obe/jdev/obe11jdev/ps1/databasedevelopment/obe_%20databasedevmt.htm. But I stopped at the last topic "Creating and Debugging PL/SQL Objects in the Database" ->"Running a SQL Script to Create an Object Type" when trying to create a object using script on the page.
This is the script:
------------------------------------------------start
REM
REM Create object ORDER_ITEMS_REC
REM
CREATE or REPLACE type ORDER_ITEMS_REC as object
ORDER_ID NUMBER(15),
LINE_ITEM_ID NUMBER(3),
PRODUCT_ID NUMBER(15),
QUANTITY NUMBER(6),
UNIT_PRICE NUMBER(8,2),
CREATED_BY VARCHAR2(60),
CREATION_DATE DATE,
LAST_UPDATED_BY VARCHAR2(60),
LAST_UPDATE_DATE DATE,
OBJECT_VERSION_ID NUMBER(15)
show errors;
--------------------------------------------------end
and the error message I got was
------------------------------------------------start
Error report:
ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
------------------------------------------------end
I was wandering whether the error of FOD installation could cause the error of the tutorial?
Any response will be appreciated.

1. you dont have to insall Oracle database at the BO machine side, you just need any database to hold the BO repository.
2. you cant connect directly using BO, only Crystal reports can connect directly to R3 database, you need to have a BW in between.
extract your data into the BW, and let BO connect to BW using the BO integration kit for SAP solutions.
3. no you dont have to have 3 different machines, using one BO machine you connect to them all, but you may need build a BO environment, (Development, Production servers)
good luck

Database development with jdeveloper

Hi
Thank you for reading my post
is it possible to use Jdeveloper to develop Mysql databases ?
how i use its diagram <> database capabilities to forward a diagram to a mysql database ?
thanks

Hi,
For information on how connect MySQl to JDev, look in the Help for 'Working with Non-Oracle Databases' under 'Using Application Development Tools | Database Tools'.
And for Modeling Database Development with JDeveloper, you can find this tutorial useful :
http://www.oracle.com/technology/obe/obe1013jdev/dbdevelopment/obe_%20dbasedevmt.htm
Regards,
Sunil..

Error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2

Hello
I have set up the Demo appliance landscape for the openSAP course "Introduction to SAP Fiori UX", on AWS.
The frontend machine is OK, but the configuration and startup of the server machine has failed for some reason. When logging in with ssh to the server, this message is presented:
The Appliance Agent detected an error and terminated.
When asked, please provide the file /tmp/applianceagent_20141002-145658.tar.bz2.
Note that a restrictive iptables based firewall is still active.
I have attached the file (had to add .txt to the name to circumvent file type restrictions).
I noticed that the appliancedeploy.log ended with these lines:
Start database Execute /usr/sap/hostctrl/exe/sapcontrol -nr 02 -function StartWait 3600 20
02.10.2014 13:56:58
Start
OK
02.10.2014 14:56:58
StartWait
FAIL: Timeout
error in /tmp/applianceagent/scripts/Database.sh: Start database failed with exit code 2
Notice the 1 hour jump in time, and then the timeout error message.
Do any of you have any idea what could be causing this, and how to fix it?
Please let me know if you need any further information.
Best regards,
Bo

Hi Hannes.
Trying to create and activate a new instance (version 5 of the Fiori appliance), I first got this message in the CAL instance overview list:
Instance Operation Failed
Operation Start failed on step Start start VAs with message: Start failed for VM SAP Server due to Amazon Web Services issue : AMAZON : The snapshot 'snap-c779ff64' does not exist.
Then I terminated the instance and tried over again. And this time the deployment worked - I have a running server, which responds to the SAP GUI, and shows the Fiori web page.
Thanks a lot for your quick help.
Best regards,
Bo

Database dependences with collaboration or infra ?

Similar Messages

Maybe you are looking for