Dazed and Confused

 Hi, I am very confused could someone just please make a suggestion of where to look next, I don't want anyone to do my work for me, I just am lost. My assignment is below with my work.
Display the Product Names of all products that were placed by customers in CA.
• Order the result by Product Name in ascending order.
• Eliminate duplicate rows in the results.
• HINT: Four WHERE clauses. First WHERE clause uses set notation, and sub query. Second WHERE clause set notation and sub query. Third WHERE clause set notation, and sub query. Fourth WHERE clause uses equal for state.
• 10 rows returned.
Here is what I have, I can't seem to get past errors and still come up with 77 rows.
SELECT p.ProductName
FROM Products p
WHERE EXISTS (SELECT p.ProductID
FROM Customers c
INNER JOIN Orders o
ON c.CustomerID = o.CustomerID
WHERE c.Region = 'CA'
AND p.ProductID = p.ProductID)
Thanks
Lea Kinney

 Hi, I am very confused could someone just please make a suggestion of where to look next, I don't want anyone to do my work for me, I just am lost. My assignment is below with my work.
Display the Product Names of all products that were placed by customers in CA.
• Order the result by Product Name in ascending order.
• Eliminate duplicate rows in the results.
• HINT: Four WHERE clauses. First WHERE clause uses set notation, and sub query. Second WHERE clause set notation and sub query. Third WHERE clause set notation, and sub query. Fourth WHERE clause uses equal for state.
• 10 rows returned.
Here is what I have, I can't seem to get past errors and still come up with 77 rows.
SELECT p.ProductName
FROM Products p
WHERE EXISTS (SELECT p.ProductID
FROM Customers c
INNER JOIN Orders o
ON c.CustomerID = o.CustomerID
WHERE c.Region = 'CA'
AND p.ProductID = p.ProductID)
Thanks
Lea Kinney
thank you so much for this. I am in a RDBMS class this is one of the questions. I have been fighting with this almost a day. this is what I had after many different configurations, then I found you.
SELECT ProductName
    FROM Products JOIN Orders ON CustomerID = customerID FROM  OrderDetails AS OD
    WHERE OrderID = (Select Max(ShipRegion) From Orders Where ShipRegion = 'CA')
I started out with one similar to the one you have. then I had this mess. this is my 2nd class on sql. I didn't really like it at first but it kind of grows on you. I really want to build applications and write scripts for virtual grids. Thanks again.
Rick
rollingreenproject.org

Similar Messages

  • Dazed and Confused? In search of an answer...

    I just recently sent my MSI Neo4 K8N Platinum Sli rig to MSI USA because of the free re-energize upgrade offer (cost me $10.30 shipping):
    http://www.msicomputer.com/msiapps/SLICampaign.aspx
    What I got back from MSI USA is a K8N Diamond (significantly labeled K8N Diamond right on the mobo) with a Platinum Sli 3.6 bios preloaded (I also got the bracket and an extra plastic sli clip).
    The bios on the MSI Neo4 K8N Platinum Sli bios is labeled 3.6 but the K8N Diamond bios is labeled 1.6.  SO, now Im dazed and confused and not sure if I should load the 1.6 Diamond bios and use that instead of 3.6 platinum sli bios...or does it make any difference?  

    Quote from: ChakkaSol on 31-August-05, 05:52:14
    ...or does it make any difference?
    Hey Chakka, IMO you should use the 1.6 for the Diamond since it is a Diamond that you have and not a NEO4 Platinum SLI, as for differences, everybody says that they are equal and the same, but...
    Be well....

  • HT5622 How do I change the Apple id against a certain telephone number?  I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

    How do I change the Apple id against a certain telephone number?  I have two iPhones and wish to use a different Apple id for each and confused as to how I do this?

    Create a new Apple ID for the second phone. If you are setting the phones up as new phone enter the ID you want to use on each phone.
    If both phones are already signed in to one Apple ID then use the settings app to change Apple IDs on one phone.
    Settings > iTunes and App Store > tap on the Apple ID > sign out > sign in with alternate Apple ID.
    Note that if you have downloaded apps with the original Apple ID on the phone with the new Apple ID, those apps will still be associated with the old Apple ID and will require the old ID and password in order to update them.

  • My new events no longer show up in Events, since I upgraded to iPhoto 11 at the end of March. The number of events goes up, but they no longer show. The photos are in my photo place all right, but everything is getting every messy and confusing. Help!

    I upgraded to iPhoto 11 from iPhoto 08 at the end of March, 2012. Since then, although all my photos appear in the library,and the number of events tally goes up, no new events show up in Events. My iPhoto is getting very mess and confusing. I have checked preferences, and they are the same as what I always had (one event/day)

    Go into the Event mode and set the View ➙ Sort menu option to By Date, either ascending or descending, and look for the new events at the top or bottom of the list.
    You can view the last import in the Last Import section and then Control (right) click on one of the photos and select Show Event.  That will take you to the event where you can rename it at the top and then check to see where in the list it is placed.
    OT

  • Hi - a new and confusing message when I try to connect my iphone with itunes on my laptop:  "this iphone cannot be used because the Apple Mobile Device Service is not started".  Any idea of my way out of this cul-de-sac??  Brian

    Hi, I'm getting a new and confusing message when I connect my Ipad/phone to my laptop:  "This iphone cannot be used because the Apple Mobile Device Service  is not started" ... any idea, anyone, how I get out of this cul-de-sac.  Brian

    try this http://melchoi.wordpress.com/tag/this-iphone-cannot-be-used-because-the-apple-mo bile-device-service-is-not-started/
    Hope it's gonna help

  • Swamped and confused about products

    Hi guys,
    I am new to Oracle middleware products. After looking at a few articles, I am swamped and confused about those products, WebCenter (WC), Content Server (CS), Universal Content Management (UCM).
    1. WC has a built-in content database, part of Oracle database. CS also stores contents into Oracle database. Then what are differences between two types of content storage? Can I build WebCenter with Content Server as the content storage?
    2. WebCenter provides management functions on content. So does UCM. Users could contribute, review and release contents to web via both. Then what are differences between two types of content management? What more does UMC provide than the built-in content management in WC.
    3. Content Server needs a third-party web server (port:80) to publish its content. WebCenter Suite seems use Oracle HTTP Server (port:7777) to render web pages. Is it possible to integrate those two on one web server? Why is Oracle HTTP Server using a weird port?
    4. JDeveloper has the built-in OC4J container. But how can JDeveloper access or interact with Content Server or WC content database? Site Studio can access Content Server directly but only provides very limited portlet or ajax components. If I want to store web pages, static or dynamic, into WC and/or CS, which tool should I use?
    Can anybody help me with them? Or please point me to the right direction. I really appreciate it.
    thanks,
    Chen

    Plug it in and use the Transfer Purchases function, either from the resulting dialog box or from the File menu. If you need to authorize the computer, choose it from the Store menu.
    (65603)

  • My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

    My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

    Just bought a Nikon d750 and confused about adobe LR4 and PS6 support for the RAW files. I have DNG 8.7 but wondering if LR and PS will import direct soon Thanks for any advice

    Support for the Nikon D750 was introduced in the latest version of LR 5.7 and ACR 8.7 on Novemder 18th 2014.
    Further updates to LR 4 were stopped when LR 5 was released on June 9th 2013. No further updates for bug fixes and new camera support.
    Nada, LR 4 will never support Nikon D750. The Nikon D750 was introduced into the market in September 2014 some 15 months after further development of LR 4 was discontinued.
    You can use the Adobe DNG program (free download for the package) to convert the Nef (raw) files from your Nikon D750 to the Adobe DNG format which will permit you to import those into LR 4. This is the crutch provided by Adobe to allow for the processing of raw files with outdated versions of LR and ACR.
    You can also update the ACR plugin for PS CS6 to version 8.7 which can also work with the raw files from the D750. For direct support in Lightroom you will need to upgrade (paid) to version 5.7.

  • [svn] 3466: Refactored TransformOffset to reduce code and confusion.

    Revision: 3466
    Author: [email protected]
    Date: 2008-10-02 21:13:46 -0700 (Thu, 02 Oct 2008)
    Log Message:
    Refactored TransformOffset to reduce code and confusion.
    UIComponent and GraphicElement now aggregate an AdvancedLayoutFeatures object, which is responsible for computing the
    actual transform based on the layout properties and a CompoundTransform object passed in as a set of offset values.
    Re-enabled updateComplete events when component transform is modified, for mustella tests.
    Review: Glenn, Evtim.
    Modified Paths:
    flex/sdk/trunk/frameworks/halo-manifest.xml
    flex/sdk/trunk/frameworks/mxml-2009-manifest.xml
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/Path.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/UIComponent.as
    flex/sdk/trunk/tools/dependencychecker/frameworkSwcExceptionsList.txt
    Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/AdvancedLayoutFeatures.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/geom/CompoundTransform.as
    Removed Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/core/TransformOffset.as

    As far as creating this code goes, look up the % operator - it returns remainder. You could use it to find whether or not each number was a factor (for example, take all the numbers <= half of the given number - 24 - and perform a loop that uses the % operator to find if the remainder is 0, which would mean that the numbers were a factor), then use the sqrt method on applicable factors to determine if any of them are perfect squares.
    If you were wondering about the term referring to the creation of these factored numbers, I normally hear the process referred to as "factoring radicals" or "simplifying radicals."

  • Found a typo on the song "Time and Confusion" by Anberlin

    I don't know if this is the right place to post this, but hopefully a moderator/admin will see it and report it to someone at Apple. Or, if someone could give me an email to contact someone at Apple about this, that would be helpful.
    I realize it's minor, but the song "Time and Confusion" by Anberlin, on their album Never Take A Friendship Personal, is spelled "Time and Confussion".
    If this could be remedied, that would be nice. Thank you!

    Fill out and submit this form.
    (33931)

  • Infinity order delays and confusion

    Hi,
    I am hoping someone from BT will read this post and urgently get back to me personally with an accurate and honest update on my order. I have spoken to numerous people in the contact centre's who have provided me with no confidence about my order.
    I originally ordered New Phoneline & Infinity on the 14th August to be installed on 6th September. I received a call a few days later saying the 6th wasn't possible and the appointment was now going to be the 10th September.
    I called the team back who had left me a voicemail advising of the change in appointment and confirmed that on the 10th September that both Phone + Infinity would be installed. I was told the delay was due to a line plant availability issue which needed another engineer to deal with, before my order could progress.
    A few days later again, I checked BT.com and it still showed the 6th September activation date and appointment date for both Phone + Infinity, so I called the Contact Centre to see what was happening. I was informed that the Infinity would not be installed on the 10th Sept, as only the Openreach engineer was going to be available on that date.
    I was told that the person who I spoke to about the appointment change to the 10th was wrong and that Phone + Inifinity was never going to be installed on the same day. I was also informed that no appointment was set for the Infinity, so at this stage I was only going to be having phone line on the 10th and the infinity was still to be arranged. I therefore had to choose a later date for the Infinity, so I opted for Tuesday 13th September.
    After this, my bt.com order tracking page showed only the activation days, which are both still showing as 6th September (even as of today) and no appointments are listed at all.
    Today (6th September) I received an SMS saying my phoneline was being activated today, again confusing me as I know (or thought) that there was no appointment for phone line booked for today. Again, another call to the contact centre. This time I was advised my order had actually been cancelled. This annoyed me as you would expect. The agent then went on to confirm with Openreach and came back and retracted his statement and confirmed there was indeed an appointment for the 10th September for my phone line. He wouldn't however confirm my Infinity would be installed on the 13th September.
    I currently have little confidence that my phoneline will be activated on the 10th and have zero confidence that my Inifity will be installed on the 13th September, likewise, I have no confidence that my bill will be correct given I have had SMS's and updates and BT.com still shows the 6th September for activation for both Phone line and the Infinity.
    I would really appreciate it if someone from BT can get in touch with me to clarify exactly what is happening with my order, provide me with assurance as to when I will have a working phone and broadband service and also explain why I have received such a confusing order process.
    Many thanks in advance,
    Stephen

    Hi Stephen,
    I am really sorry for the confusion here.  I can understand that this would start to become annoying given everything you have been told. 
    The SMS message and the bt.com are still working off the original details.  If you have spoken with someone confirming that the dates have changed then this is the most uptodate info and the website and SMS should be ignored.
    I'll be happy to have a look over the order and clear everything up and keep an eye on its progress until its closed.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • HP ENVY 4500 creates its own SSID on my WiFi network causing problems and confusion

    I am finding this problem hard to articulate clearly and I can’t find any information on the internet about why my new HP Envy 4500 printer has set itself up with its own SSID on my WiFi network, but here goes :
    I bought an HP Envy 4500 all in one printer for my daughter’s room in university, which has a WiFi network with WPA security. First I tried to add this printer to the room WiFi using the printer menu, but it gave an error stating that the WPA passkey format was incorrect, when in fact it was the correct password. So instead I had to install the printer using the installation options accessed from the HP website using her laptop.
    This has worked, but it has also set the printer up with its own independent SSID called ‘HP-Setup-45-ENVY 4500 Series’. This separate SSID for the printer is causing some problems and does not seem to have any useful purpose. For example sometimes documents randomly will not print from the laptop, but if you then disconnect the laptop from the room SSID and reconnect it to the printer SSID, the documents will then print, but then you have to reconnect to the room's SSID when done. This is confusing and of course completely unwanted behaviour.
    Does anyone know why this new SSID called ‘HP-Setup-45-ENVY 4500 Series’ has been set up for the printer please? Can I get rid of it so that printer is simply a device connected on the WiFi network in the room please?
    I hope this makes sense as this a very frustrating issue for something that should be completely straightforward.
    Thanks.
    This question was solved.
    View Solution.

    Go into the printer settings and disable Wireless Direct. Done.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Lost and Confused

    I am trying to understand arrays.
    Where do you declare an array?
    I understand that an array is basically a container of like items/objects, but how do I fill the container? How do I get the information into the array? If I don't know the information before hand how do I put it in the array? If I have to be specific and put the information in the array then why do I need an array?
    If I have a main that works, and I have a class that works how do I add an array to make the application hold more than one item and then print out the multiple items?
    In my mind the application should simply use the loop to gather the information then print out the information when the loop reaches it's end.
    All the examples I have found basically show the same thing, just the part of the code that declares the array.
    What the example do not show is how the declaration applies to an application.
    I'm getting nowhere fast, except more confused and frustrated :-(

    petes,
    You helped me work out a problem before :-) If you are not a teacher, you would make an excellent one!
    Turing, I read your link as well!
    I don't know why I can't figure this array part out. It all reads like it should be obvious, but I'm going from bad to worse! I went from 12 errors to 1 error to 22 errors!
    I'm already late on the assignment, that isn't my main objective now. I want to KNOW what I'm doing wrong. It has to be something I can fix. Something I am just not getting.
    //Inventory Program Part 1
    //Inventory enters and displays Part information
    //for product inventory
    *Parts used for testing include Glass Break: part # FG730,
    *Motion Detector: part# Aurora, and W/L Contact: part # 5816.
    *any quantity for units on hand and unit price is appropriate
    *for testing purposes.
    import java.util.Scanner;    // program uses class Scanner
    import java.text.*;
    public class Inventory
    private static void Quit()
             System.out.println("Goodbye");
         System.exit (0);
        // main method begins execution of Java application
         public static void main(String args[])
                     // create Scanner to obtain input from command window
            Scanner input = new Scanner(System.in);
         while(true)// starts loop to test name
                 System.out.print("\nEnter Part Name (stop to quit):  "); // prompt for name
                       part.setName(input.nextLine());   // get name
              if(part.getName().compareToIgnoreCase("stop") == 0)
                     System.out.println("Stop entered, Thank you");
                     Quit();
                     } //end if
            System.out.print("Enter part number for " + part.getName() + ":  ");  // prompt
                       part.setitemNum(input.nextLine());    // read part number from user
            System.out.print("Enter Units on hand: ");    // prompt
                       part.setunits(input.nextDouble());    // read second number from user
         if(part.getunits() <= 0)
                      System.out.println ("Invalid amount, Units on hand worked must be positive");
                      System.out.print("Please enter actual units on hand: ");
                        part.setunits(input.nextDouble());
                      } //end if
         System.out.print("Enter Unit Price: $ ");    // prompt
                       part.setprice(input.nextDouble());    // read third number from user
         if(part.getprice() <= 0)
                      System.out.println ("Invalid amount, Unit Price must be positive");
                      System.out.print("Please enter actual unit price: $ ");
                           part.setprice(input.nextDouble());
                      } //end if
         String fmtStr = "\n%-7s %-10s %12s %12s %12s\n";
         System.out.printf(fmtStr, "Part #", "Part Name",
               "Units On Hand", "Unit Cost", "Total Cost");
          for(int i = 0; i<5; i++)
             part[] Partarray = new part[5];      // allocates memory for 5 strings
             part[0] = "Glass Break"; // initialize first element
             part[1] = "Motion"; // initialize second element
             part[2] = "Keypad"; // etc.
             part[3] = "W/L Contact";
             part[4] = "Contact";
              System.out.println("Element at index 0: " + part[0]);
              System.out.println("Element at index 1: " + part[1]);
              System.out.println("Element at index 2: " + part[2]);
              System.out.println("Element at index 3: " + part[3]);
              System.out.println("Element at index 4: " + part[4]);
         }//end for
            }//end while
        }//end main
    }// end class Inventory
    // Class Part holds Part information
    class Part
       private String name;
       private String itemNum;
       private double units;
       private double price;
       //default constructor
        public Part()
            name = "";
            itemNum = "";
            units = 0;
             price = 0;
        }//end default constructor
         //Parameterized Constructor
        public Part(String name, String itemNum, double units, double price)
             this.name = name;
             this.itemNum = itemNum;
             this.units = units;
             this.price = price;
        }//end constructor
         public void setName(String name) {
             this.name = name;
            String getName()
                return name;
        public void setitemNum ( String itemNum )
            this.itemNum = itemNum;
        public String getitemNum()
         return itemNum;       }
         public void setunits ( double units )
             this.units = units;
         public double getunits()
              return units;
         public void setprice ( double price )
             this.price = price;
         public double getprice()
         return price;
         public double getvalue()
         return (units * price);
    }//end Class PartAnd the original code I started from, which works beautifully......
    //Inventory Program Part 1
    //Program enters and displays part information
    //for product inventory
    import java.util.Scanner;    // program uses class Scanner
    import java.text.*;
    public class Inventory1
    private static void Quit()
            System.out.println("Goodbye");
         System.exit (0);
        // main method begins execution of Java application
        public static void main(String args[])
            Part part = new Part();
            // create Scanner to obtain input from command window
            Scanner input = new Scanner(System.in);
         while(true)// starts loop to test name
                 System.out.print("Enter Part Name (stop to quit):  "); // prompt for name
                       part.setName(input.nextLine());   // get name
                 if(part.getName().compareToIgnoreCase("stop") == 0)
                    System.out.println("Stop entered, Thank you");
                    Quit();
                    } //end if
                    System.out.print("Enter part number for " + part.getName() + ":  ");  // prompt
                     part.setitemNum(input.nextLine());    // read part number from user
                     System.out.print("Enter Units on hand: ");    // prompt
                    part.setunits(input.nextDouble());    // read second number from user
                             if(part.getunits() <= 0)
                                    System.out.println ("Invalid amount, Units on hand worked must be positive");
                                    System.out.print("Please enter actual units on hand: ");
                                    part.setunits(input.nextDouble());
                               } //end if
              System.out.print("Enter Unit Price: $ ");    // prompt
                    part.setprice(input.nextDouble());    // read third number from user
                             if(part.getprice() <= 0)
                                    System.out.println ("Invalid amount, Unit Price must be positive");
                                    System.out.print("Please enter actual unit price: $ ");
                                    part.setprice(input.nextDouble());
                               } //end if
              System.out.printf("\n%s    %s       %.2f    %.2f      %.2f\n", part.getitemNum(), part.getName(), part.getunits(), part.getprice(), part.getvalue());
    input.nextLine();
              }//end while
         }// end method main
    } // end class Inventory
    // Class Part holds Part information
    class Part
       private String name;
       private String itemNum;
       private double units;
       private double price;
       //default constructor
        public Part()
            name = "";
            itemNum = "";
            units = 0;
             price = 0;
        }//end default constructor
        //Parameterized Constructor
        public Part(String name, String itemNum, double units, double price)
            this.name = name;
            this.itemNum = itemNum;
            this.units = units;
             this.price = price;
        }//end constructor
         public void setName(String name) {
            this.name = name;
           String getName()
              return name;
        public void setitemNum ( String itemNum )
            this.itemNum = itemNum;
        public String getitemNum()
              return itemNum;
        public void setunits ( double units )
            this.units = units;
        public double getunits()
              return units;
        public void setprice ( double price )
            this.price = price;
        public double getprice()
              return price;
        public double getvalue()
              return (units * price);
    }//end Class Part

  • I'm new and confused about "connection" things

    I'm new to BlackBerry--I have an 8320 Curve, I'm a small business owner and I'm not connected to a BES. I use the BB Desktop Manager to synchronize with Outlook and to back up my BB and I've done pretty well on most things, but I still have a few things I'm confused about. In this forum, I'll ask my "confusion questions" concerning data options.
    I have a "pay as you go" data plan with AT&T, my provider, because there is virtually no cell reception at my home where I also work. (I'm not using my BB for email since I'm in front of my computer most of the time). I have a home network set up and I've incorporated a router that supports wireless. I've connected a netbook to the wireless network and used it to surf the Internet, so, I know my wireless connection works. I've also managed to create a wireless connection on my BB to this network and on the Home screen, it will display my wireless network's name when I'm here at home, so, I know the device is connected to my network.
    BUT, I don't think I'm actually using my home wireless network...I tried the other day by browsing the Internet and then AT&T told me I incurred data charges--which I thought I shouldn't have if I wasn't using their network. Either I'm wrong about assuming they won't charge me if I use my network or I have something set up incorrectly on my BB...can anyone provide some guidance?
    Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
    Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
    Thanks...and now I'm off to the BB Desktop Manager forum to ask a few questions there!
    Solved!
    Go to Solution.

    Hi and Welcome to the forums!
    I can help you with one or two of your questions:
    ejm1 wrote:
    Next, I don't truly understand what BIS is...I searched through the KB and couldn't find anything that actually defines BIS...could somebody please explain what BIS is?
    BIS is Blackberry Internet Service...a service, hosted by your carrier, that provides a conduit between internet facing email systems (e.g., Yahoo, GMail, etc.) and your BB. Inside of BIS, you create conduits for each of your email providers that you desire to receive OTA email for on your BB. BIS will check your provider on a periodic basis (documented to be every 15 minutes) and only when there is something that needs to come to your BB does it generate any traffic over the carrier network with your BB. BIS is an add-service, only available to those who, from their carrier, contract for The Blackberry Data Plan (as it is usually called) -- a generic data plan is not usually adequate to have access to BIS.
    ejm1 wrote:
    Finally, can somebody please explain the difference between "mobile network" and "wi-fi"? It seems, if I turn off "mobile network" I have no connection at all, including wi-fi. Is that the way things should be? But, I can turn off wi-fi and still get a connection (if I go outside as far from my house as possible and face south <g>).
    Mobile Network is your carriers network...data and/or voice services provided OTA for your BB. WiFi is wireless networking (802.11a/b/g/n) through your home WAP, hotspots, etc. I don't know if turning off Mobile Networ should or should not affect your ability to continue to use WiFi...I would think they are separate, but I don't have a BB model with WiFi.
    I know nothing about the pay-as-you-go programs, but from all you describe, it seems that you may well be using your carrier network at times. You will need to find out (and there are others here who know) how to shut off your carrier network yet leave WiFi running so that you don't incurr the costs of surfing via the carrier network.
    Hope that helps a little!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Iphoto 11 - Duplicates and confusing suffixes on External Edit

    Just a warning. Iphoto 11 has some changes that make it difficult to use an external editor.
    I use iphoto in my photo processing process to edit photo's externally with photoshop CS4. I like iphoto for cropping because it has standard frame sizes and I like its view on the database. I also like iphoto as easy to understand. I also use(d) iphoto because it is easy edit on my mac laptop and then finally import the new iphoto library into aperture when done.
    Iphoto 11 now creates a duplicate file so you will have the original raw and duplicate when you are done, in your iphoto library. It is very confusing because they have the same names and you grab one thinking its the other.
    In addition, I am getting all kinds of errors in transferring files from iphoto to CS4. I think what is happening is that iphoto is saving in tiff but putting a jpg suffix on it and CS4 is seeing it as a corrupt jpeg and won't open.
    Anyway, until apple/adobe coordinate on this, iphoto is not longer easy to use with an external editor.
    You might want to stay in iphoto 9 until they get the bugs out or consider moving to lightroom or aperture if you are a heavy photoshop user.
    If I am wrong, I would appreciated feedback. I have struggled with it for 1/2 a day and given up for now.
    Scott

    YEs - this is very frustrating. I was trying to use CaptureDX2 to edit the Raws - using it as an external editor. But when you open up the external program, iPhoto quickly creates a duplicate image in your library - a view of the browser shows that this thumbnail image in the library points to the original file, in this case the RAW file I was trying to edit. ARGHH. This, obviously, makes a mess of the library (with duplicate thumbnails every time you'd open the file to edit in the external editor. Does anyone have any ideas regarding this?

Maybe you are looking for

  • Simple Button Hit Zone not working

    I am somewhat new to Flash CS4 andt am having a problem making simple buttons in Flash CS4 on a Macintosh: I have made a few buttons with a graphic and can go into them and successfully create the Up, Over and Down stages of the graphic. Then when I

  • Migrating old account to new Macbook Pro

    I got a nice new Macbook Pro (2010 version) with the i7 processor. I had to get a new cable to migrate my information from my old Macbook Pro (2006?)so I performed the migration the next day. The computer ran fine for several days until I rebooted it

  • NOKIA 5530 Xpress Music, Wont Connect To Home Rout...

    I have recently brought a Nokia 5530.. I have a Netgear MIMO WPN824 router with WPA-PSK [TKIP] + WPA2-PSK [AES] security, with password over 20 char.. I have a laptop, Xbox, Iphone and other items connected to the router without a problem. When I fir

  • Create link to document services into VA43

    Hi expert, in various transaction exists a link to document services with toolbox in left corner (trx FB03, ME21N, ...). In SD sales order object don't exist !!! How to create the link in transaction VA41/2/3 and VA01/2/3 ? Thanks Danielsan

  • RRI - Urgent

    Hello Experts ,           My requirement is  - Selecting  any key figure from the main report(A), drill down to the another report(B- RRI) and the correct number of records appear on the Report B.       if i m clicking on Key figure 2 , then I should