DBA TOOLS not included in EHP1

Hi!
After unpacking the EHP1 for Solution Manager kernel archives, I've noticed that DBA Tools files were not included.
Is that correct?
If so, what version of DBA Tools I should use?
These are the kernel archives selected (and already downloaded) by MOPZ:
SAPEXE_23-10005984.SAR
SAPEXEDB_23-10005987.SAR
I thought there should be an archive named like DBATL7*.SAR as well.
Thanks in advance for any help or tip.
Paulo

> Is that correct?
yes
> If so, what version of DBA Tools I should use?
The brtools to be used are dependent on the database version. Since you most likely use Oracle 10g you need to download the brtools package in the kernel directory of 7.00 (not 7.01).
Markus

Similar Messages

Why Tools list does not include the widget "Arrange documents"?

Why in the Configurator’s Tools list was not included the widget “Arrange documents” from Photoshop’s Menu Bar? It would be great to find N-up view buttons in the Configurator’s Tools list in future.

Abufarzana, this is a user to user forum and noone from Apple is here to address your request. However, if you wish, you can submit your suggestion to the Apple feedback site at the following link: http://www.apple.com/contact/feedback.html

Open-vm-tools/official vmware tools not installing.

I'm trying to install the latest offical vmware tools (16/9/2013) and open-vm-tools but both seem to always fail. I tried some of the patches listed on the wiki, but nothing got me anywhere. The big thing I'm trying to accomplish is to be able to use vmhgfs but, I'd like to have all the tools if possible. Here is what I did.
Open Vm Tools
#[root@localhost] - [14-01-01 18:09:33] - [/home/toxicarrow/Documents/firewall] - [R:0]
pacman -S open-vm-tools open-vm-tools-dkms
resolving dependencies...
looking for inter-conflicts...
Packages (2): open-vm-tools-5:2013.09.16-5 open-vm-tools-dkms-5:2013.09.16-5
Total Installed Size: 8.21 MiB
:: Proceed with installation? [Y/n]
(2/2) checking keys in keyring [#####################################################################################################################] 100%
(2/2) checking package integrity [#####################################################################################################################] 100%
(2/2) loading package files [#####################################################################################################################] 100%
(2/2) checking for file conflicts [#####################################################################################################################] 100%
(2/2) checking available disk space [#####################################################################################################################] 100%
(1/2) installing open-vm-tools [#####################################################################################################################] 100%
>>>
>>> You can mount VMware Shared Folders via:
>>> mount -t vmhgfs .host:/ /mnt/hgfs
>>>
>>> or by adding this line to /etc/fstab:
>>> .host:/ /mnt/hgfs vmhgfs defaults 0 0
>>>
Optional dependencies for open-vm-tools
gtkmm [installed]
libnotify [installed]
libxtst [installed]
fuse [installed]
libsm [installed]
open-vm-tools-modules: for linux kernel
open-vm-tools-dkms: for linux-lts and other kernels [pending]
netctl: suspend-resume network state [installed]
networkmanager: suspend-resume network state
(2/2) installing open-vm-tools-dkms [#####################################################################################################################] 100%
>>> Enable building of open-vm-tools modules:
>>> $ dkms add open-vm-tools/2013.09.16
>>>
>>> Enabling vmxnet driver in /usr/lib/modprobe.d/open-vm-tools-modules.conf
>>> (this will disable pcnet32 driver)
>>>
>>> If vmxnet driver doesn't handle your NIC, you have to manually
>>> disable loading of pcnet32 driver
>>>
#[root@localhost] - [14-01-01 18:09:47] - [/home/toxicarrow/Documents/firewall] - [R:0]
pacman -S open-vm-tools-modules
warning: open-vm-tools-dkms-5:2013.09.16-5 is up to date -- reinstalling
resolving dependencies...
looking for inter-conflicts...
Packages (1): open-vm-tools-dkms-5:2013.09.16-5
Total Installed Size: 5.57 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [#####################################################################################################################] 100%
(1/1) checking package integrity [#####################################################################################################################] 100%
(1/1) loading package files [#####################################################################################################################] 100%
(1/1) checking for file conflicts [#####################################################################################################################] 100%
(1/1) checking available disk space [#####################################################################################################################] 100%
(1/1) reinstalling open-vm-tools-dkms [#####################################################################################################################] 100%
>>> Enable building of open-vm-tools modules:
>>> $ dkms add open-vm-tools/2013.09.16
>>>
#[root@localhost] - [14-01-01 18:10:14] - [/home/toxicarrow/Documents/firewall] - [R:0]
dkms install -m open-vm-tools -v 2013.04.16 -k $(uname -r)
Error! Could not find module source directory.
Directory: /usr/src/open-vm-tools-2013.04.16 does not exist.
#[root@localhost] - [14-01-01 18:13:14] - [/home/toxicarrow/Documents/firewall] - [R:2]
dkms install -m open-vm-tools -v 2013.09.16 -k $(uname -r)
Kernel preparation unnecessary for this kernel. Skipping...
Building module:
cleaning build area....
make KERNELRELEASE=3.12.6-1-ARCH VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmblock; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmci; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmhgfs; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmsync; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vmxnet; make VM_UNAME=3.12.6-1-ARCH MODULEBUILDDIR=/var/lib/dkms/open-vm-tools/2013.09.16/build -C vsock........
Error! Build of vmblock.ko failed for: 3.12.6-1-ARCH (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
#[root@localhost] - [14-01-01 18:13:45] - [/home/toxicarrow/Documents/firewall] - [R:7]
Official Tools
Before patches
#[root@localhost] - [14-01-02 2:40:49] - [/home/toxicarrow/vmware/vmware-tools-distrib] - [R:32]
./vmware-install.pl
A previous installation of VMware Tools has been detected.
The previous installation was made by the tar installer (version 4).
Keeping the tar4 installer database format.
You have a version of VMware Tools installed. Continuing this install will
first uninstall the currently installed version. Do you wish to continue?
(yes/no) [yes]
Uninstalling the tar installation of VMware Tools.
Stopping services for VMware Tools
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
VM communication interface socket family: done
VM communication interface: done
Stopping Thinprint services in the virtual machine:
Stopping Virtual Printing daemon: done
The removal of VMware Tools 9.6.1 build-1378637 for Linux completed
successfully.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/init.d]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 9.6.1 build-1378637 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Initializing...
Making sure services for VMware Tools are stopped.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
VM communication interface socket family: done
VM communication interface: done
Stopping Thinprint services in the virtual machine:
Stopping Virtual Printing daemon: done
sh: : command not found
sh: : command not found
Before you can compile modules, you need to have the following installed...
make
gcc
kernel headers of the running kernel
Searching for GCC...
Detected GCC binary at "/bin/gcc".
The path "/bin/gcc" appears to be a valid path to the gcc binary.
Would you like to change it? [no]
Searching for a valid kernel header path...
Detected the kernel headers at "/lib/modules/3.12.6-1-ARCH/build/include".
The path "/lib/modules/3.12.6-1-ARCH/build/include" appears to be a valid path
to the 3.12.6-1-ARCH kernel headers.
Would you like to change it? [no]
make: Entering directory '/tmp/modconfig-lyoMIO/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-lyoMIO/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-lyoMIO/vmci-only/driverLog.o
LD [M] /tmp/modconfig-lyoMIO/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-lyoMIO/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-lyoMIO/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-lyoMIO/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-lyoMIO/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-lyoMIO/vmci-only'
make: Entering directory '/tmp/modconfig-VlEWPD/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-VlEWPD/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-VlEWPD/vmci-only/driverLog.o
LD [M] /tmp/modconfig-VlEWPD/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-VlEWPD/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-VlEWPD/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-VlEWPD/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-VlEWPD/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-VlEWPD/vmci-only'
make: Entering directory '/tmp/modconfig-VlEWPD/vsock-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/af_vsock.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/vsockAddr.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/notifyQState.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/util.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/stats.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/linux/notify.o
CC [M] /tmp/modconfig-VlEWPD/vsock-only/driverLog.o
LD [M] /tmp/modconfig-VlEWPD/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-VlEWPD/vsock-only/vsock.mod.o
LD [M] /tmp/modconfig-VlEWPD/vsock-only/vsock.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-VlEWPD/vsock-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-VlEWPD/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory '/tmp/modconfig-VlEWPD/vsock-only'
The module vmxnet3 from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module pvscsi from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module vmmemctl from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
make: Entering directory '/tmp/modconfig-C1YUSD/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-C1YUSD/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-C1YUSD/vmci-only/driverLog.o
LD [M] /tmp/modconfig-C1YUSD/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-C1YUSD/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-C1YUSD/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-C1YUSD/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-C1YUSD/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-C1YUSD/vmci-only'
make: Entering directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/message.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/request.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/link.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/module.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/file.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/super.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/page.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/inode.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-C1YUSD/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-C1YUSD/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-C1YUSD/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-C1YUSD/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory '/tmp/modconfig-C1YUSD/vmhgfs-only'
The vmxnet driver is no longer supported on kernels 3.3 and greater. Please
upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
NOTICE: It appears your system does not have the required fuse packages
installed. The VMware blocking filesystem requires the fuse packages and its
libraries to function properly. Please install the fuse or fuse-utils package
using your systems package management utility and re-run this script in order
to enable the VMware blocking filesystem.
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. This feature can be
enabled/disabled by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Detected X server version 1.14.5
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Warning: This script could not find mkinitrd or update-initramfs and cannot
remake the initrd file!
Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
VM communication interface: done
VM communication interface socket family: failed
Guest filesystem driver: failed
Mounting HGFS shares: failed
VMware User Agent: done
Guest operating system daemon: done
Unable to start services for VMware Tools
Execution aborted.
After patches
#[root@localhost] - [14-01-02 2:44:39] - [/home/toxicarrow/vmware] - [R:0]
git clone https://github.com/rasa/vmware-tools-patches.git
Cloning into 'vmware-tools-patches'...
remote: Reusing existing pack: 134, done.
remote: Total 134 (delta 0), reused 0 (delta 0)
Receiving objects: 100% (134/134), 22.06 KiB | 0 bytes/s, done.
Resolving deltas: 100% (74/74), done.
Checking connectivity... done.
#[root@localhost] - [14-01-02 2:44:55] - [/home/toxicarrow/vmware] - [R:0]
ls
= VMwareTools-9.6.1-1378637.tar.gz manifest.txt* run_upgrader.sh vmware-tools-distrib/ vmware-tools-patches/ vmware-tools-upgrader-32* vmware-tools-upgrader-64*
#[root@localhost] - [14-01-02 2:44:57] - [/home/toxicarrow/vmware] - [R:0]
cp VMwareTools-9.6.1-1378637.tar.gz vmware-tools-patches
#[root@localhost] - [14-01-02 2:45:13] - [/home/toxicarrow/vmware] - [R:0]
cd vmware-tools-patches
#[root@localhost] - [14-01-02 2:45:17] - [/home/toxicarrow/vmware/vmware-tools-patches] - [R:0]
ls
LICENSE VMwareTools-9.6.1-1378637.tar.gz patch-module.sh* patches/ untar-and-patch-and-compile.sh*
README.md download-patches.sh* patch-modules.sh* untar-all-and-patch.sh* untar-and-patch.sh*
#[root@localhost] - [14-01-02 2:45:18] - [/home/toxicarrow/vmware/vmware-tools-patches] - [R:0]
./untar-and-patch-and-compile.sh
=== Patching ./VMwareTools-9.6.1-1378637.tar.gz ...
--- Applying vmci/vmware9.k3.8rc4.patch ...
patching file linux/driver.c
Hunk #1 FAILED at 124.
Hunk #2 FAILED at 1750.
Hunk #3 FAILED at 1978.
3 out of 3 hunks FAILED -- saving rejects to file linux/driver.c.rej
--- Applying vmhgfs/vmhgfs-uid-gid-kernel-3.12-tools-9.6.1.patch ...
patching file file.c
patching file filesystem.c
patching file fsutil.c
patching file inode.c
Hunk #1 succeeded at 514 (offset -3 lines).
Hunk #2 succeeded at 617 (offset -3 lines).
Hunk #3 succeeded at 1216 (offset -3 lines).
patching file shared/compat_cred.h
--- Applying vmhgfs/vmhgfs-d_count-kernel-3.11-tools-9.6.0.patch ...
patching file inode.c
Hunk #1 succeeded at 31 with fuzz 1.
Hunk #2 FAILED at 1893.
Hunk #3 FAILED at 1946.
2 out of 3 hunks FAILED -- saving rejects to file inode.c.rej
--- Applying vmhgfs/vmware9.compat_mm.patch ...
patching file shared/compat_mm.h
Hunk #1 FAILED at 91.
Hunk #2 FAILED at 100.
2 out of 2 hunks FAILED -- saving rejects to file shared/compat_mm.h.rej
--- Applying vmhgfs/patch_inode.c.patch ...
patching file inode.c
Hunk #1 FAILED at 1798.
Hunk #2 FAILED at 1818.
2 out of 2 hunks FAILED -- saving rejects to file inode.c.rej
--- Applying vmblock/vmblock.3.11.patch ...
patching file linux/file.c
--- Applying vmblock/vmblock.3.10.patch ...
patching file linux/control.c
Creating a new VMware Tools installer database using the tar4 format.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/init.d]
What is the directory that contains the init scripts?
[/etc/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 9.6.1 build-1378637 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Initializing...
Making sure services for VMware Tools are stopped.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: done
Unmounting HGFS shares: done
Guest filesystem driver: done
Stopping Thinprint services in the virtual machine:
Stopping Virtual Printing daemon: done
sh: : command not found
sh: : command not found
make: Entering directory '/tmp/modconfig-HrsGw6/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-HrsGw6/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-HrsGw6/vmci-only/driverLog.o
LD [M] /tmp/modconfig-HrsGw6/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-HrsGw6/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-HrsGw6/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-HrsGw6/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-HrsGw6/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-HrsGw6/vmci-only'
make: Entering directory '/tmp/modconfig-pVUBEq/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-pVUBEq/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-pVUBEq/vmci-only/driverLog.o
LD [M] /tmp/modconfig-pVUBEq/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-pVUBEq/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-pVUBEq/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-pVUBEq/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-pVUBEq/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-pVUBEq/vmci-only'
make: Entering directory '/tmp/modconfig-pVUBEq/vsock-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/af_vsock.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/vsockAddr.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/notifyQState.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/util.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/stats.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/linux/notify.o
CC [M] /tmp/modconfig-pVUBEq/vsock-only/driverLog.o
LD [M] /tmp/modconfig-pVUBEq/vsock-only/vsock.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-pVUBEq/vsock-only/vsock.mod.o
LD [M] /tmp/modconfig-pVUBEq/vsock-only/vsock.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-pVUBEq/vsock-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-pVUBEq/vsock-only'
cp -f vsock.ko ./../vsock.o
make: Leaving directory '/tmp/modconfig-pVUBEq/vsock-only'
The module vmxnet3 from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module pvscsi from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The module vmmemctl from this package is not supported for kernels >= 3.10.
Please enable this module in your kernel. You may also have to enable
HYPERVISOR_GUEST.
The VMware Host-Guest Filesystem allows for shared folders between the host OS
and the guest OS in a Fusion or Workstation virtual environment. Do you wish
to enable this feature? [yes]
make: Entering directory '/tmp/modconfig-ukgHfB/vmci-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-ukgHfB/vmci-only/linux/driver.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/linux/vmciKernelIf.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciDriver.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciResource.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciContext.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciDatagram.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciHashtable.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciEvent.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciQueuePair.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciDoorbell.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciQPair.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/common/vmciRoute.o
CC [M] /tmp/modconfig-ukgHfB/vmci-only/driverLog.o
LD [M] /tmp/modconfig-ukgHfB/vmci-only/vmci.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-ukgHfB/vmci-only/vmci.mod.o
LD [M] /tmp/modconfig-ukgHfB/vmci-only/vmci.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-ukgHfB/vmci-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-ukgHfB/vmci-only'
cp -f vmci.ko ./../vmci.o
make: Leaving directory '/tmp/modconfig-ukgHfB/vmci-only'
make: Entering directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
Using 2.6.x kernel build system.
/bin/make -C /lib/modules/3.12.6-1-ARCH/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= modules
make[1]: Entering directory '/usr/src/linux-3.12.6-1-ARCH'
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/backdoorGcc64.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/message.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/request.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/filesystem.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/cpName.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/dentry.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/rpcout.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/hgfsUtil.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/stubs.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/hgfsEscape.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/link.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/transport.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/module.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/file.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/super.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/vmci.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/bdhandler.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/dir.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/fsutil.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/cpNameLinux.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/hgfsBd.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/page.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/backdoor.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/inode.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/cpNameLite.o
CC [M] /tmp/modconfig-ukgHfB/vmhgfs-only/kernelStubsLinux.o
LD [M] /tmp/modconfig-ukgHfB/vmhgfs-only/vmhgfs.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/modconfig-ukgHfB/vmhgfs-only/vmhgfs.mod.o
LD [M] /tmp/modconfig-ukgHfB/vmhgfs-only/vmhgfs.ko
make[1]: Leaving directory '/usr/src/linux-3.12.6-1-ARCH'
/bin/make -C $PWD SRCROOT=$PWD/. \
MODULEBUILDDIR= postbuild
make[1]: Entering directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
make[1]: 'postbuild' is up to date.
make[1]: Leaving directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
cp -f vmhgfs.ko ./../vmhgfs.o
make: Leaving directory '/tmp/modconfig-ukgHfB/vmhgfs-only'
The vmxnet driver is no longer supported on kernels 3.3 and greater. Please
upgrade to a newer virtual NIC. (e.g., vmxnet3 or e1000e)
The vmblock enables dragging or copying files between host and guest in a
Fusion or Workstation virtual environment. Do you wish to enable this feature?
[yes]
NOTICE: It appears your system does not have the required fuse packages
installed. The VMware blocking filesystem requires the fuse packages and its
libraries to function properly. Please install the fuse or fuse-utils package
using your systems package management utility and re-run this script in order
to enable the VMware blocking filesystem.
VMware automatic kernel modules enables automatic building and installation of
VMware kernel modules at boot that are not already present. This feature can be
enabled/disabled by re-running vmware-config-tools.pl.
Would you like to enable VMware automatic kernel modules?
[no]
Detected X server version 1.14.5
Distribution provided drivers for Xorg X server are used.
Skipping X configuration because X drivers are not included.
Warning: This script could not find mkinitrd or update-initramfs and cannot
remake the initrd file!
Checking acpi hot plug done
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: done
VM communication interface: done
VM communication interface socket family: failed
Guest filesystem driver: failed
Mounting HGFS shares: failed
Guest operating system daemon: done
Unable to start services for VMware Tools
Execution aborted.
#[root@localhost] - [14-01-02 2:46:53] - [/home/toxicarrow/vmware/vmware-tools-patches] - [R:0]
Any idea what I should be doing?

I have the same problem on ESXI 5.5 for over a month now, tried the patches, tried the LTS kernel which others say results in an immediate result without patches, nothing seems to work and nobody seems to be able to offer a solution.
Did you make any progress ??
Error! Build of vmblock.ko failed for: 3.10.25-1-lts (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/open-vm-tools/2013.09.16/build/ for more information.
make[2]: *** No rule to make target '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/linux/inode', needed by '/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock/vmblock.o'. Stop.
Makefile:1224: recipe for target '_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock' failed
make[1]: *** [_module_/var/lib/dkms/open-vm-tools/2013.09.16/build/vmblock] Error 2
make[1]: Leaving directory '/usr/src/linux-3.10.25-1-lts'
Makefile:120: recipe for target 'vmblock.ko' failed
Last edited by crankshaft (2014-01-10 11:32:32)

The content menu in my Acrobat X Standard does not include the "multimedia" selection??

What am I missing? The Adobe Classroom In A Book clearly refers to it...

Hi,
I am sorry to hear that you're having trouble in locating 'Multimedia' tools in Acrobat.
Acrobat X Standard does not include most of the interactive object tools. You need to use Acrobat X Pro for those features. Kindly check the comparison matrix at:
http://www.adobe.com/products/acrobat/matrix.html
~Sandeep V.

Where Can I Find Components And Footprints Not Included In The Circuit Design Suite Databases?

One of the most common questions asked by users of the Multisim and Ultiboard suite is about finding components. From time to time you may come across the need of a particular component or footprint (lanbdpattern) that is not included in the master databases. So where can you look for these components? There are multiple places to begin your search, both 3rd party and from NI that are free and readily accessible:
One of the long-standing free resources is the Kittmaster's Component Database which is maintained by Kittmaster (Chris) one of our proven active veterans of this board as well as a Beta Tester of the Circuit Design Suite. You will find a vast collection of already built parts in Multisim and Ultiboard formats that have been submitted by users like you that have register on kittmaster's database and that actively upload custom component creations. I encourage you to register and share.
NI has recently created the Circuit Design Community in response to requests from users around the world. The Circuit Design Community aims to provide an open resource for designers that need or would like to share Multisim components, Ultiboard footprints, sample design files and other documents that are of use for the design community. The basic difference between the Circuit Design Community and this Circuit Design Discussion Forum is that the Community is tailored for document and file sharing, whereas the Forum is designed with problem solving, tip sharing and general support questions in mind. Again, I encourage you not only to search, but also to share any components you may have created that are useful for other designers.
Most manufacturers that offer SPICE or PSPICE models in their websites would typically allow you to download them free of charge, in most cases accepting a license agreement. The first step is to identify who the manufacture of the part you are looking for is, as well as cross-reference manufacturers. Then search in their corresponding websites for the product folder or design resources section. If you find SPICE or PSPICE models you can easily import those when creating a new component, remember that Multisim is highly compatible with PSPICE models, and every new release adds more compatibility. If you cannot find the model, it does not hurts to call or email the manufacture and ask directly if they have such models, in many cases they are not advertised in the web.
Last, but not least, use your favourite internet search engine and see if anyone out there has posted or worked on a similar model.
Thank you for using the support resources and I hope that these options fulfill most of the component searches that you may need to do.
Message Edited by nestor on 04-14-2009 02:52 PM
Nestor
National Instruments

You can have a look at some established projects that are using similar tools - where do they put the application files etc.
There are things like XDG_CONFIG_HOME, XDG_DATA_HOME etc. http://standards.freedesktop.org/basedi … atest.html

Search results do not include "sponsored links"

Hi Team,
Search results do not include "sponsored links" (delivered by sponsored links index) nor "related terms" (not sure where/how these are configured
Thanks
Chandu

You may also have to create an allow exception to keep this cookie.
In case you are using "Clear history when Firefox closes":
*do not clear the Cookies
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception.

Project librarys not included in WAR file with deployment (WEB-INF/lib)

Using JDeveloper 9.0.5.2
Project Libraries are not included in WEB-INF/lib when deploying. Although the files are selected in the deployment file at 'Contributors'. Within the 'filter' the .jar files are missing.
To solve it i have to register again (i have already made the librarys project library's) the files within Tools->ManageLibrarys as user library's.
The other workaround is to make the library's System Library's within the project.
In my opinion it is a bug that you must include the project librarys as user librarys within the 'LibraryManager'

Unfortunately no, the issue with output folder being ignored occurs only with example apps bundled with Workshop product.
You can try the following workaround:
- In Workshop, Project > Properties - Java Build Path, switch to Source tab - "Remove the source folder listing" - Click OK and dismiss Properties window.
- Project > Properties - Java Build Path > Source Tab, add the same source folder entry - Click OK
- Export as WAR
With this you should see the class files bundled under output directory structure (Ex: WEB-INF/classes).

HomeSite not included in CS3 Web Premium?

I recently purchased CS3 Web Premium for PC and was surprised
to find that HomeSite is not included in the software. Is this
correct, or is there someplace I can download a copy of it? I was
under the impression that HomeSite was included in the CS3 suites,
or at least included with Dreamweaver (which is part of CS3 Web
Premium). Any info is appreciated.

Well, what a drag. I like Dreamweaver for some things, but
for doing web dev when you are coding stuff yourself I think
HomeSite is one of the cleanest code gen tools I ever came accross.
I like it because it seems to mangle your own written code the
least of any tool when used back and forth from "source code" to
"design" modes.

My privacy option does not include "custom settings"and i am not able to block cookies.

To set Firefox to block cookies from all websites:
At the top of the Firefox window, click on the Firefox button (Tools menu in Windows XP) and then click Options
Select the Privacy panel.
' Set Firefox will: to Use custom settings for history.
Remove the check mark from Accept cookies from sites.
Click OK to close the Options window
"Set Firefox will: to Use custom settings for history" is not included in my privacy panel

Do you see the set Firefox will line?
Next to that text you see a clickable button and if you click that button then a drop down list with further choices will open.
See:
*https://support.mozilla.com/kb/Options%20window%20-%20Privacy%20panel

SJWS SP3 - Not including some jars from war file

I have a problem when deploying my application using the new Java Web Server SP3 that when my application is deployed my weblogic.jar and j2ee.jar are not included in the classpath that is created.
I have turned on finest detail logging and it does not say why these jar files are not being included in the path.
They are in the war files lib dir just like all the other jars(about 14 of them).
The only way I can get the app to run under SJWS is to add these other two files manualy to the classpath in the server.xml file.
This app runs fine under JRun 4.0 with no issues.
Why is this server dropping these jars and not even telling me it did it? What can I do to make it include these files in the proper classpath?
Thx

Here are the log entries.
finer: WebappLoader[/vc]: WEB3107: Deploy WAR /WEB-INF/lib/weblogic.jar to
C:\Sun\WebServer6.1\https-mis-lt-23974.corporate\webapps\XXXXXXX\WEB-INF\lib\weblogic.jar
finer: WebappLoader[/vc]: WEB3107: Deploy JAR /WEB-INF/lib/j2ee.jar to
C:\Sun\WebServer6.1\https-mis-lt-23974.corporate\webapps\XXXXXXX\WEB-INF\lib\j2ee.jarAs you can see it see's the two jar files from my WAR file.
But when I try and run the app, have a look at the CLASSPATH it created. The two jar's are missing. WHY??????????????
info: for host 127.0.0.1 trying to GET /vc/login/jsp/login_redirect.jsp, service
-j2ee reports: WEB2798: [] ServletContext.log(): WEB4077: Classpath from the ser
vlet context is:
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/NetComponents.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/aseclient.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/client.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/dbswing.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/dx.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xxx-xxxxtags.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xxx-xxxxxtags.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/internetbeans.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jbcl.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jcert.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/jnet.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/log4j.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/regexp.jar;
C:/Sun/WebServer6.1/https-mis-lt-23974.corporate/webapps/XXXXXXX/WEB-INF/lib/xerces.jar;
/C:/Sun/WebServer6.1/bin/https/jar/webserv-rt.jar;/C:/j2sdk1.4.2_04/lib/tools.jar;
/C:/Sun/WebServer6.1/bin/https/jar/webserv-ext.jar;
/C:/Sun/WebServer6.1/bin/https/jar/webserv-jstl.jar;
/C:/Sun/WebServer6.1/bin/https/jar/ktsearch.jar;
/C:/app/XXXXXXX/;
/C:/j2sdk1.4.2_04/jre/lib/ext/dnsns.jar;
/C:/j2sdk1.4.2_04/jre/lib/ext/ldapsec.jar;
/C:/j2sdk1.4.2_04/jre/lib/ext/localedata.jar;
/C:/j2sdk1.4.2_04/jre/lib/ext/sunjce_provider.jar

Importing Photos and NOT including Metadata at the same time

Hello
I know you can export a photo and marking the check box to NOT INCLUDE metadata, but can you import the same way.
Thanks

Aperture does not allow to modify EXIF tags. You will need other tools for doing that. If you know hot to use the Terminal, you can modify EXIF tags with exiftool, see:
Modifying EXIF tags of Originals Using exiftool: camera, lens, gps

Live paint bucket not including all lines

I'm creating a map with different shaded regions and have tried several times but the Live Paint tool is not including all the lines. There is a large area that is showing up as a single region, and all the other lines included in that area that should be designating different smaller regions seem to be ignored. am I doing something wrong? Thanks to all responders.
Leslie

Double Click the Live Paint tool when the dialog shows up check paint strokes which is off by default

Elements 10 backup from XP - restore to W7 - restore does not include any duplicated pics

Hi, hope someone can help?
I am a new user to Elements10 and originally installed it onto an XP desktop.    I have since upgraded the desktop to Windows7 and want to transfer my images and elements catalog. I have performed a full backup of my catalog from the XP os, via the backup process in Elements (which says successful) and performed a restore onto the W7 desktop retaining the original folder structure (also via Elements).
Despite doing this several times, I always get error messages saying the restore cannot restore a selection of .xml files, but if I continue with the backup it finally says "successful".
However when I compare the number of restored images, with the originals, it appears I am over 700 files short!       A bit of investigation indicates that the restore is not restoring any duplicate images (those with identical file names but in different folders), but only restores one copy of the image.    I can't check all 700 files individually, but can someone confirm if this expected behaviour, so that I can stop worrying that I have lost 700+ images?
Thanks
Steve

stevew218 a écrit:
Ah... as per my 1st post, I am a new user to Elements.    Apologies, I have been approaching this from the wrong direction!   I have checked back on my original XP disk and Elements catalog, and it appears that when I set up the original catalog against my existing pics it did not include any duplicate files, therefore the Backup\Restore is correct, it is the original cataloging of my pictures that did not work as expected.     Do I have to do anything specific to get the catalog to include duplicate file names?
Sorry for the misdirection
Steve
Steve,
The basic rule of database management is to forbid duplicates.
In the case of the Organizer, that would mean changing one of the two above criteria (date daken or file size in kB). That would be possible outside of the Organizer by using external tools, but the problem is that you don't know which files are concerned...
Now that you have restored your catalog in your new catalog, a theoretical solution would be to get back to the old catalog, and use the organizer to delete all the files in the catalog. The remaining ones would be the duplicates. Creating a new empy catalog and importing the remaining files would recover all duplicates. You could then restore on the new PC.
There are still two problems:
- You can't delete a big number of files at the same time? You'd have to delete by small batches
- You'll have all your duplicates in your new PC, but you still won't be able to include them in the main catalog even you have now a special catalog with only the duplicates.
So, the final question may be : why do you want to keep duplicates? You can examine the duplicates catalog and see if they are really necessary. Maybe you can live with two different catalogs.

Mouse drag, hand tool not working at all!

So I've installed Photoshop CC 2014 and Illustrator CC 2014 on my computer, started a new file but only found that any action that includes mouse dragging - creating shapes, hand tool, pen tool - do not work at all, everything just do not respond, when creating a shape it will treat it as if I have clicked once (which pops out the create rectangle window for size input..), the same situation happens to Photoshop as well (perhaps all Adobe CC software). I've been trying everything that have been suggested on the forum (some from the links below): removing all other software at the background (spotify, 1password, etc). Also I've tried with using different sets of keyboard and mouse, either wired and wireless, still no luck. One situation that finally works is that all software work perfectly fine in safe mode, then I rebooted back to normal mode, try killing any background process that was not running in safe mode, still...not working at all...
References:
(Illustrator CS6) Spacebar stops working seemingly randomly
Spacebar Shortcut: Hand Tool Not Showing and Not Working
Illustrator gets stuck on hand tool
My computer specs:
Windows 7 Pro 64-bit
Intel Core i3-4130 3.4Ghz
4GB RAM

wecon,
You could try to reinstall using the full three step way:
Uninstall, run the Cleaner Tool, and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Soundbooth CS4 - Output audio FLV does not include cues! ????

Hello folks,
I am in a bit of a pickle and hopefully someone can enlighten me.
I own Soundbooth CS4 and I was hoping to use this tool to create audio FLV files with embedded cues (aka markers).
To my great disappointment, the flash audio files I created do NOT include the embedded cues. Is this a known fault?
I was about to create a purchase requisition for Soundbooth CS5 but for some inexplicable reason, Adobe choose not to allow FLV output from the trial version. So there is no way for me to test the latest version from my work.
Can anyone explain to me how to create .flv audio files with embedded cues (aka markers) with Soundbooth CS4 and CS5? Is it possible?
My goal is to replace the flakey Moyea FLV editor Ultimate. Is this going to be possible?
Thank you

The following help file specifically states that one can indeed embed cue points within a saved .flv file.
http://help.adobe.com/en_US/Soundbooth/2.0/WSA5A1DDFB-6BE2-4486-BE0C-A10CEEF119ADa.html
This does not work for me in Soundbooth CS4 and I am unable to test CS5.

DBA TOOLS not included in EHP1

Similar Messages

Maybe you are looking for