DBIF_RSQL_SQL_ERROR which are related to BW ods Activation
Hi friends,
I dont know whether this is the right thread i am posting or not. But technical people can definately help me.
Recently we have upgraded patch from SP 22 to SP 25 for BI 7.0. From that time onwards i am facing issues like anything.
Here is the impact.
1. Data loads not triggering for process Chains as per schedules. we are running emegency chains manually. We have raised an issue to SAP, waiting for reply.
Short Dumps:
b)
DBIF_REPO_SQL_ERROR
Short text
SQL error 3114 occurred when accessing program "SAPLRS_EXCEPTION " part "LOAD".
What happened?
The system is no longer linked to an ORACLE instance.
No further operations can be performed on the database.
Error analysis
The system attempted to access an ORACLE instance to which
it is no longer linked.
This situation may arise because the ORACLE instance
has been stopped due to an error or an external operation.
How to correct the error
Database error text........: "ORA-03114: not connected to ORACLE"
Triggering SQL statement...: "SAPLRS_EXCEPTION "
The current status of the ORACLE instance cannot be determined.
It may be still inactive or the database administrator may have
restarted it.
In any case, all systems that have accessed the ORACLE instance
must be restarted after the ORACLE instance has been restarted.
If you were working on a central system, inform
your system administrator.
If you were working on an external local system, inform
the person responsible for this system.
If you were working on your own local system, restart
the system yourself.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_REPO_SQL_ERROR" " "
"SAPLRRMS" or "LRRMSU14"
"RRMS_EXCEPTION_HANDLING"
c)
DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
How to correct the error
Database error text........: "ORA-03135: connection lost contact"
Internal call code.........: "[RSQL/RDUP/TADIR ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLSDI0" or "LSDI0U01"
"TRINT_TADIR_UPDATE"
2. Especially ODS activation (through process chains) failing in every process Chain. if you run maual activation , then its ok.
All Batch are got struck when accessing table TADIR. Dump C which is mensioned above impact is very high on the system.
Anyone know about to resolve the above dumps, Please help me.
If you want to analyze more detailed level, please let me know
Thanks in Advance.
Venkat
Hi Mark,
Please gothrough below details.
Filename......: sqlnet.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10 # Name..........:
Date..........:
@(#) $Id: //bc/640-2/src/ins/SAPINST/impl/tpls/ora/ind/SQLNET.ORA#4 $ ################
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
NAME.DEFAULT_ZONE = WORLD
SQLNET.EXPIRE_TIME = 0
TCP.NODELAY=YES
TADIR file got struck during this stament:
Last SQL statement
SELECT
/*+
FIRST_ROWS (1)
FROM
"TADIR"
WHERE
"PGMID" = :A0 AND "OBJECT" = :A1 AND "OBJ_NAME" = :A2
FOR UPDATE
Database Number Time (usec) Recs.
Direct Read 1,017 172,733 232
Sequential Read 1,815 471729 10,454
Insert 20 31,223 306
Update 25 9,621 17
Delete 25 115,827 291
Sources 3,069,427 (Bytes)
RSQL 2,265,032 (Bytes)
Commit 0
DB Procedure Calls 0 0
Thanks and reagards
Venkat
Similar Messages
-
Migrating the SAP-Scripts to smartforma which are related to Finance(FI)
Hi,
Do we can migrate the SAP-Scripts to Smartform which are related to Finance(FI) & those SAP-Scripts are called by a standard print program (RFFOUS_C)
Urgent answer need please!!!
Thanks,Hello,
Yes you can migrate script to smartform there are different ways to migrate.
Use program SF_MIGRATE..
to migrate from scripts to smartforms.
Reward if helpful.
Viswam. -
Find activitys which are related to an opportuntiy
Hello Experts
I can related an acctivity with a Opportunity.
I want to select this information from the sysmtem. In which tabels i find the information?
How can i finde the activitys which are related to an opportuntiy?
Regards,
SvenHello Vellory,
You can query the table CRMD_LINK for retrieving the follow up document. But, here you will run into a little bit confusion as to select which one.
So, a much better and cleaner approach would be to use the Function Module - CRM_ORDER_READ. Using this FM you can very easily retrieve all the following and preceding documents in the Export Tables Parameter ET_DOC_FLOW. From here you can again call the CRM_ORDER_READ to get the additional details for each one order document.
You can even execute the Report CRM_ORDER_READ in SE38 Tcode to have a feel of the actual FM.
Hope this will help.
Thanks,
Samantak. -
Unction modules which are related to transaction code (XD01 & VL01N)
hi expects,
can any body give me the function modules which are related to transaction code (XD01 & VL01N).please help meHi Santosh,
FM related to XD01 are :
QPL1_INSPECTION_LOT_CREATE - for creating Inspection Lots
BAPI_INSPECTIONPLAN_CREATE - for creating Inspection Points
FM related to VL01N are :
these are used for creating delivery
WS_DELIVERY_UPDATE
BAPI_OUTB_DELIVERY_CREATE
BAPI_OUTB_DELIVERY_SAVEREPLICA
BAPI_OUTB_DELIVERY_CONFIRM_DEC
BAPI_OUTB_DELIVERY_SPLIT_DEC
SHP_VL10_DELIVERY_CREATE
Reagrds,
Sunil -
Which are the most popular reports in SAP BI for Purchasing and Sales
Hi Experts,
I'm looking to work on one completed BI content flow.
I wanted to work on 1 report from each module to activate the relevant objects.
Can anyone please let me know which reports in Purchasing and Sales are frequently used in SAP BI.
ThanksHi,
Please check table - RSRREPDIR
Report names which are related to purchasing - 0PUR_C0N_Q00Y, N and Y indicates number.
same for sales report names - 0SD_C0N_Q00Y .
Query tech names - 0PUR_C01_Q0021
Thanks -
Active Directory cross forest trust which are deployed in separate subscription
Hi All,
I know that this is not Azure forum, but I have a question related to Active Directory, Appreciate your understanding and letting me know your concerns about AD cross forest between two subscriptions of Azure.
We have two separate subscriptions of Windows Azure under one Global Account, previously these two subscriptions are treated as a separate company and they are having separate forest and separate domain, these two companies does not have any site to
site VPN with each other over the wan, but these two companies are having site to site connection with Azure for their own subscription respectively.
Additional domain controller for both subscriptions are deployed in Azure in order to authenticate those servers which are already deployed in Azure
Due to some reasons these companies are merging together and due to some reasons they want to have cross forest trusts between these two companies. As we do not have any WAN connection between these two companies the questions has been raised that can we
do a cross forest trust between two Active Directories because these two are deployed in Azure and both companies active directories are deployed in Azure.
Can we achieve this and how we can achieve this, I know that we can expose servers in Azure over the internet by creating endpoints and allow ACL in order to get connection from specific public IPs.
My question is can we achieve this, does it supported from Microsoft. if yes then is there any thing we have to consider before deploying it.
Thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft LyncNo, i am not using Windows Azure Active Directory at all, i have deployed additional domain controllers from each forest on each subscription.
For example in subscription 1 we have additional domain controller of forest 1 and in subscription 2 we have additional domain controller of forest 2.
Thanks
If answer is helpful, please hit the green arrow on the left, or mark as answer. Salahuddin | Blogs:http://salahuddinkhatri.wordpress.com | MCITP Microsoft Lync -
How to findout Which are the User Exist had been activated for T.Code
Hi Everybody,
-->I want to know, what are the user exits have been activated or used for a particular t.code.
--> I will give a small example it will be give clear idea on my question.
-->For my client, they used lot of user exist and screen exist in the sales order screen,how to find out them. Is their any easy way to find out which are user exist had been acitviated for a particular template.
Regards,
MadhanIf you mean how to see a user list with the T-Code they are using.
Then you can just use T-Code SM04.
It will give all the information about those user.
Or If you mean User Exists.
then please use this link
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
Thanks,
Sugauli
Edited by: Sugauli on Dec 11, 2008 9:20 PM -
Suppliers which are active and not being involved for a long time
Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
ThanksHi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman -
Create relation between two blocks which are based on different procedure
Hiii
How to create relation between two blocks which are based on different stored procedures in Oracle form??
Pradhyumn Sharmahiii,
I selected the common key deptno in both procedure.
I created a relation between both procedure. but when i compile the form it give an error in ON-CHECK-DELETE-MASTER. My procedure are
==================================
PACKAGE emp_pkg AS
TYPE emprec IS RECORD(
empno asg_emp.empno%type,
ename asg_emp.ename%type,
job asg_emp.job%type,
sal asg_emp.sal%type,
deptno asg_emp.deptno%type);
TYPE emptab IS TABLE OF emprec INDEX BY BINARY_INTEGER;
PROCEDURE empquery(block_data IN OUT emptab, p_deptno IN NUMBER);
end;
====================================
PACKAGE dept_rec IS
type rec is record(dname asg_dept.dname%type,
loc asg_dept.loc%type,
deptno asg_dept.deptno%type);
type deptrec is table of rec index by binary_integer;
PROCEDURE dept_rec1(block1 in out deptrec);
END;
===================================
In ON-CHECK-DELETE-MASTER
CURSOR BLOCK9_cur IS
SELECT 1 FROM dept_rec.dept_rec1 d
WHERE d.DEPTNO = :BLOCK6.DEPTNO;
identifier dept_rec.dept_rec1 must be declared.
Regards
Pradhyumn -
Join 2 tables which are not related with any primary-foriegn key constraint
Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.
How can i write the select query for this condition?
Thanks
SwapnaHi, Swapna,
user11018268 wrote:
Hello,
How to join 2 tables which are not related with any primary key foreign key constraint.
Ex.Consider Table A has 5 columns->A_ID,A_Name,A_Address,A_City,A_Pin(Total 10 rows)
Table B has 5 columns->B_ID,B_Name,B_Adress,B_City,B_City(Total 30 rows)
Both the table are entirely different,but there can be some names of Table A which may come in Table B also,if the name,address and city is also same.That means same person in both the table.I think you want a UNION, not a join.
If you have 10 rows in table_a, and 30 rows in table_b, then
SELECT A_ID, A_Name, A_Address, A_City, A_Pin
FROM table_a
UNION
SELECT B_ID, B_Name, B_Adress, B_City, B_City
FROM table_b
ORDER BY 2, 4
;will produce up to 40 rows; 40 if there are no duplicates. (UNION implies DISTINCT.)
The corresponding column types should be similar, if not exactly the same.
There's no problem if A_Name is VARCHAR2 (50) and B_Name is CHAR (30).
However, there will be a problem if A_ID is a NUMBER and B_ID is a TIMESTAMP.
You must have the same number of columns in all branches of the UNION.
If you want an ORDER BY clause, put it at the very end, after the last branch of the UNION.
You can use positional notation (where 2 means the 2nd column) like I did, or you can use names from the first prong of the UNION (such as A_Name).
From both the table i want the data,which i need to use in curosr to display finally as "Address Label".
So finally i want total number of distinct records(distinct data of Table A which is not in B+all the data of table B) to come under Address Label.I'm not sure what your mean about "Address Label".
Whenever you have a question, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables, and the exact results (formatted) that you want from that data.
You can concatenate all 5 columns into one VARCHAR2 column, if you want to.
You'll probably want to use RPAD (or simillar functions) to make the output line up nicely.
If any of the columns are not strings, use TO_CHAR to make string versions of them.
For example:
SELECT TO_CHAR (A_ID, '9999999')
|| ' ' -- leave a little space between the left-justified a_id and the right-justified a_name
|| RPAD (A_Name, 25)
|| RPAD (A_Address, 50)
...Edited by: Frank Kulash on Nov 14, 2009 10:11 AM -
I cannot reactivate my e-reader with my existing Adobe ID and password which are both correct. I alwayss get the message "activation server error, Code: E_AUTH_NOT_READY" What kind of problem is this and what is most important, how can I solve it quickly. I am on holiday and want to read. Thanks for speedy reply.
Yes, actually I talk about Digital editions. Do you know how to solve the problem as described in my first mail for Digital Editions? Thanks for your kind assistance.
-
Which are the quires has been build by using this ODS.
Hi,
Please some one tell me how to find out The any ODS has been using in which are the queries .
Or which are the quires has been build by using this ODS.
Thanks,
GALHi GAL BI,
You check in the meta data repository, you can get the list of queries build on that particular DSO.
The table RSRREPDIR (directory of all queries) - it will display the queries developed on the top of IC and MP.
If you want to know particular query where it is used click on where used list it will display .
Regards
KP -
Anyone any advice on how to stop my mail "activity" from continuously caching? is this a problem? I have had inbox issues recently that are not resolved yet but I am not sure if they are related.
Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results. -
Which are the Related tables in Service Tax
Hi,
Which are the Related tables in Service Tax
Regards,
SivaHi
i am not pretty sure of the tables..but better check the config for it in service tax at extended withholding tax type
regards
shibu -
Sp_who2 -need only active sessions from users which are not the background sessions
Hello,
sp_who2 -need only active sessions from users which are not the background sessions
Please assist.
Best regards,
VishalIts better to use DMV's to view only active sessions from users (spid>50) as mentioned by Shanky.
You can do that using sp_who2 but it requires a bit of programming to list only user sessions.
SELECT
S.SESSION_ID,
S.STATUS,
S.HOST_NAME,
C.CLIENT_NET_ADDRESS,
CASE WHEN S.LOGIN_NAME = S.ORIGINAL_LOGIN_NAME THEN S.LOGIN_NAME ELSE S.LOGIN_NAME END LOGIN_NAME,
S.PROGRAM_NAME,
C.CONNECT_TIME,
S.LOGIN_TIME,
CASE S.TRANSACTION_ISOLATION_LEVEL
WHEN 0 THEN 'UNSPECIFIED'
WHEN 1 THEN 'READUNCOMITTED'
WHEN 2 THEN 'READCOMMITTED'
WHEN 3 THEN 'REPEATABLE'
WHEN 4 THEN 'SERIALIZABLE'
WHEN 5 THEN 'SNAPSHOT'
ELSE CAST(S.TRANSACTION_ISOLATION_LEVEL AS VARCHAR(32))
END AS TRANSACTION_ISOLATION_LEVEL_NAME,
S.LAST_SUCCESSFUL_LOGON,
S.LAST_UNSUCCESSFUL_LOGON,
S.UNSUCCESSFUL_LOGONS,
S.CPU_TIME AS CPU_TIME_MS,
S.MEMORY_USAGE AS MEMORY_USAGE_PAGES,
S.ROW_COUNT,
S.PREV_ERROR,
S.LAST_REQUEST_START_TIME,
S.LAST_REQUEST_END_TIME,
C.NET_TRANSPORT,
C.PROTOCOL_TYPE,
S.LANGUAGE,
S.DATE_FORMAT,
ST.TEXT AS QUERY_TEXT
FROM
SYS.DM_EXEC_SESSIONS S
FULL OUTER JOIN SYS.DM_EXEC_CONNECTIONS C ON C.SESSION_ID = S.SESSION_ID
CROSS APPLY SYS.DM_EXEC_SQL_TEXT(C.MOST_RECENT_SQL_HANDLE) ST
WHERE
S.SESSION_ID IS NULL
OR S.SESSION_ID > 50
ORDER BY
S.SESSION_ID
-Prashanth
Maybe you are looking for
-
everytime i click on the view in itunes button/link on the itunes website so that i can download apps, nothing happens. I accendentally clicked on the button other than open itunes and now i cant fix it
-
Error while Running "Tax Credit Upload" Request Set in Payroll
Hi Friends, Firstly, wishing you all a happy New year. I am having an issue with a process, we have received a file from Irish Revenue which is a file with .tfa extension having the Tax details. While uploading the file using the "Tax Credit Upload"
-
E-Recruiting: CP-S relationship missing?
Hi all, I'm working on E-Recruiting 6 and in the IMG documentation I read in the section "BAdI: Inbound Processing HR Master Data" that "The Central Person (object type CP) is assigned to the position instead of the Person (object type P)". Also in t
-
Can import TIFF files but not see or work with images
I previously used Aperture 2 with no problems. I have scanned a large number (hundreds) of negatives using SilverFast current version 6.6.2r2 using a Plustek OpticFilm 7500i scanner. These files are saved as .tif and are all approx 55 MB in size. I w
-
Why did itunes 11 crash?
Why did itunes crash?