Dbx rtc shared memory check
Hi!
There are two programs (server + client ) which are interconnected via shared mem.
When Im trying to check client program with dbx( -C and check -access ), server is always dumping core in protocol classes of shmem and client is hanging on handshaking procedure. Is there is any way to disable DBX RTC(access checks ) to put traps or mark somehow the shared memory which is used by client program ?
Hi Leonard!
Threre is the problem with sources and stuff for server binary - it is "third side" software with no syms at all. so the core file is quite useless.
Ive found out the way to run correctly with server and mem access check - it is all about servers parameters about places(addr + page size rounding) of shmem and also Ive figured out another problem - there is an errors in server logs for semaphors and shmem lock calls. It looks like dbx is trapping whole mmap area from client.
Im still on investigation so I will post any usefull results here.
btw, skippatch is working quite strange actually...
Here is an example:
%dbx -C ./some_binary
(dbx)modules > ./loaded_modules
do some preparation stuff with output files so the file should looks like this( Ive ran with sed ):
rtc skippatch wait3.o
rtc skippatch wait4.o
rtc skippatch waitid.o
rtc skippatch waitpid.o
rtc skippatch walkstack.o
(dbx)check -access
(dbx) <copy/paste prepared file >
(dbx)run
theoretically, RTC should not work at all just because generated and pasted file contains all objects and librarys which is used by target binary.
but actually, RTC is patching and working as usual.
ps. 5.10 Generic_138888-01 sun4u sparc SUNW,Netra-T12 with dbx 7.7 ( from sunstudio 12.1 ).
pps. Ive read your short HOWTO about DBX RTC usage from the blog - very useful! Tommorow I will try to go with LD_AUDIT option.
Similar Messages
-
Issue in enabling dbx rtc for memory leak analysis
Any help on this is highly appreciated ...
Following is the issue:
pass@odcsmoke1> dbx -C xfer
changes (topic)
The major new features of this release relative to 6.1 are:
o The dbx environment variable "rtc_use_traps" has been removed.
Traps are used automatically as long as the hardware is UltraSparc.
o There is now some basic support for looking at core files from
different versions of Solaris. See `help core mismatch' for details.
o Stepping to a specific function support. See `help step to' for details.
o Fortran intrinsics support on Intel has been removed.
o Dbx automatically translates some old dbxenv variables to their new
names. See `help dbxenv' for details.
o The default command-line editing mode is now emacs. See "How do I enable
command-line editing?" in FAQ for details (`help FAQ').
o Two new collector commands have been implemented: `pause' and `resume'.
See `help collector' for details.
o The collector enable_once command has been removed.
o The collector store command has been extended to include experiment groups.
See also `help changes61'
To suppress this message, add the following line to your .dbxrc file:
dbxenv suppress_startup_message 6.2
Reading xfer
Reading ld.so.1
Reading librtc.so
Reading libm.so.1
Reading libnsl.so.1
Reading libresolv.so.2
Reading libc.so.1
Reading libgen.so.1
Reading libdl.so.1
Reading librt.so.1
Reading libpthread.so.1
Reading libthread.so.1
Reading libsocket.so.1
Reading libxfermain.so
Reading libpass.so
Reading libarsapic.so
Reading libarsrecordc.so
Reading libiaconfig.so
Reading libarsconfig.so
Reading libclientsock.so
Reading libaio.so.1
Reading libmd5.so.1
detected a multithreaded program
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) check -all
access checking - ON
memuse checking - ON
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) check -leaks
leaks checking - ON
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) stop in main
More than one identifier 'main'.
Select one of the following:
0) Cancel
1) `xfer`xfer.c`main
2) `libxfermain.so`xfer.c`main
a) All
1(2) stop in main
-d ecpix.conf -g y -P n <
Running: xfer -f rbi_1.cfg -d ecpix.conf -g y -P n
(process id 33)
dbx: warning: A threaded program is not initializing libthread first!
*/opt/SUNWspro/WS6U2/lib/dbxruntime/librtc.so came before it.*
dbx: warning: A threaded program is not initializing libthread first!
/lib/libc.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libnsl.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libsocket.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libresolv.so.2 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libgen.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libaio.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/libmd5.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/lib/librt.so.1 came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libpass.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libclientsock.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libarsrecordc.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libiaconfig.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libarsapic.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libarsconfig.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/lib/sparc-sun-solaris2.8/libxfermain.so came before it.
dbx: warning: A threaded program is not initializing libthread first!
/usr/pass/etc/xfer came before it.
stopped in main at line 461 in file "xfer.c"
461 CHAR *Etc_Dir="/usr/pass/etc/";
(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx) showmemuse
dbx: warning: check -leaks/-memuse must be issued before the run command for showmemuse to be used(/opt/SUNWspro/bin/../WS6U2/bin/sparcv9/dbx)
pass@odcsmoke1> uname -a
SunOS odcsmoke1 5.10 Generic_118822-30 sun4u sparc SUNW,Sun-Fire-V250Andrew is right, dbx 6.2 is very old; technically, it is supported on Solaris 10, but as you can see for yourself, there are issues to be fixed.
Only limited support is available for this version, so if you have a support contract, please report this problem through the support channel. Better yet (and in case if you don't have support contract), upgrade to a more modern version. Since you are on Solaris 10, I'd recommend latest version of Sun Studio - 12 update 1; it is free for all uses and can be downloaded from here: http://developers.sun.com/sunstudio/downloads/.
Should you have any questions about the upgrade, please post it here. -
Dbx: Unable to run with memory checking enabled
When I try to debug any program using memory checking, I get the following error:
RTC: Enabling Error Checking...
t@1 (l@1) signal SEGV (no mapping at the fault address ) in __rtc_mutex_unlock at 0xfffffd7ff3534949
0xfffffd7ff3534949: __rtc_mutex_unlock+0x0159: call *%r8d
dbx: Stopped within call to '__rtc_suppress_always'. Starting new command interpreter
Versions:
Solaris: SunOS 5.10 Generic_118844-20 ( amd64 )
CC: Sun C++ 5.8 Patch 121018-02 2006/04/08
dbx: 7.5 Patch 12166-02 2006/05/30This segv problem (bug 6431531) has been fixed in SunStudio Express 2. SSX2 can be downloaded from:
http://developers.sun.com/prodtech/cc/downloads/express.jsp -
Runtime memory checking - freezes program from the start
We'd very much like to use Forte to check a program for memory leaks. When it runs from the GUI invocation it seems to freeze up during init'ing. I discovered "bcheck", and tried it as well (See below), but once again it seems not to be talking to the proc it's intended to, and nor does the log show anything, so it seems to freeze as well.
Any clues on how we move on from here?
bash-2.03$ bcheck -all -o l.log longlife -port=20020 &
[4] 23702
bash-2.03$ Reading longlife
Reading ld.so.1
Reading librtc.so
Reading libretriever.so
Reading libdl.so.1
Reading libsocket.so.1
Reading libnsl.so.1
Reading libpthread.so.1
Reading libCrun.so.1
Reading libm.so.1
Reading libw.so.1
Reading libthread.so.1
Reading libc.so.1
Reading libz.so.1
Reading libmp.so.2
Reading libc_psr.so.1
detected a multithreaded program
access checking - ON
memuse checking - ON
Running: longlife -port=20020
(process id 23714)I am seeing something similar, trying to debug a multithreaded app.
Reading libsocket.so.1
Reading libnsl.so.1
Reading libdl.so.1
Reading librt.so.1
Reading libpthread.so.1
Reading libresolv.so.2
Reading libc.so.1
Reading libCrun.so.1
Reading libmp.so.2
Reading libaio.so.1
Reading libw.so.1
Reading libc_psr.so.1
Reading libthread.so.1
detected a multithreaded program
(/opt/SUNWspro/bin/../WS6U1/bin/sparcv9/dbx) check -access
access checking - ON
(/opt/SUNWspro/bin/../WS6U1/bin/sparcv9/dbx) run
Running: <>
(process id 24424)
RTC: Enabling Error Checking...
And it just sits there.truss -p 24419
write(9, "\0\0\0\0\0\0\003", 8) (sleeping...)
pstack 24419
24419: /opt/SUNWspro/bin/../WS6U1/bin/sparcv9/dbx -C /tmp/awz/bin/nsd8x
ffffffff7e5a1f40 write (9, 1010e79a0, 8)
00000001001e18f8 __1cEPCmdKflush_help6M_v_ (1010e6990, 3, 0, 0, 0, 0) + 19c
00000001001e1640 __1cEPCmdFflush6M_i_ (1010e6990, 3, 400000000, 0, 0, ffffffff7fffdc51) + 2c
00000001001e66d8 __1cFPcsPDEwait6MpnDLwp__b_ (10054516b, 100543ae8, 1010e6990, 0, 0, 0) + 110
00000001001f69b0 __1cEProcEwait6M_v_ (1005f5fd0, 1, 54ac00, 54aef4, 100000000, 0) + c4
00000001001fdaec __1cEProcCgo6MpnEVCpu_nGProcGo_b_v_ (0, ffffffffffffffff, 3, 0, 1005f5fd0, 1012121d0) + 500
00000001001056a8 __1cHCallMgrEcall6MpnMActiveEntity_pnDFun_pnICallArgs_pnHRetRegs_I_b_ (100547278, 100998df7, 0, 1005f5fd0, 0, 0) + 658
000000010021da8c __1cIRtcMgr_tIcallproc6MpnDFun_pnICallArgs_pnHRetRegs_b_b_ (0, 0, 100628610, 1006280c0, 101210f30, 101211130) + 31c
000000010021de14 __1cIRtcMgr_tNcheck_uncheck6MLLb_v_ (1005f6ea0, 1858c0, 80, 0, 0, 0) + 184
000000010021aa2c __1cIRtcMgr_tWinit_uncheck_func_list6M_v_ (10062ee20, 1, 0, ab4, 1005f26f0, 1005519ab) + 29c
0000000100214404 __1cIRtcMgr_tPrtc_new_process6M_v_ (10111d190, 1005141f8, 0, 100551922, 50430001, 4c455645) + 72c
0000000100212c54 ???????? (1005f5fd0, 10111cf50, 0, 10111cf50, 1, 0)
00000001000ec138 __1cSActionList_execute6FpnEList4nGAction___pnEProc_pnHHandler_pnJEventInst_nHLevel_e__v_ (100b2ecc0, 1005f5fd0, 101121be0, 10111cf50, 1, 54494400) + 4c
0000000100188d84 __1cHHandlerSdecision_procedure6MpnEProc__v_ (101121be0, 1005f5fd0, 54ac00, 54aef4, 100000000, 101122693) + 168
000000010020a9e0 __1cKRecognizerHtrigger6M_v_ (101121be0, 10111cf50, fe92e7a0, 10051e438, 0, 101122690) + 138
000000010020afb0 __1cKRecognizerIdispatch6F_v_ (1005e8940, 100866ef0, 0, 1010e7a40, 101122080, 0) + 6c
00000001001fc9cc __1cEProcNvcpu_dispatch6MpnEVCpu__b_ (101122080, 1005141f8, 100866ef0, 0, 0, ffffffff7fffe821) + 37c
00000001001fcadc __1cEProcQpervcpu_dispatch6MpnEVCpu__v_ (564400, 5646d0, 100000000, 0, 0, 0) + ac
00000001001fd364 __1cEProcQgeneric_dispatch6MpnEVCpu__b_ (1005f5fd0, ffffffffffffffff, 0, 1010e7a40, 0, 100547d7f) + 18c
00000001001fdb4c __1cEProcCgo6MpnEVCpu_nGProcGo_b_v_ (0, ffffffffffffffff, 1, 1, 1, 5dec00) + 560
00000001001a3f48 __1cGdo_run6FbnHLevel_e__i_ (5d3400, 0, 1, 514000, 5141f8, 100000000) + 538
00000001002bdec0 ???????? (0, 1002c4508, 100575f8f, 1, 1005fb098, 1005fb050)
00000001002bcb2c __1cHexecute6FpnGInterp_pnCop_i_i_ (2, 101087df0, 0, 0, 5f63625f, 64697370) + 228
00000001002a934c __1cFshell6FpnGInterp_pnGSource__i_ (1000df06c, 1005748a0, 0, 1005fb2d0, 1005fb2c8, 1) + 5b0
00000001000e48fc __1cNmain_cmd_loop6FpnGInterp__v_ (1005fb050, 530f80, 1, 0, 0, ffffffff7ffff0d0) + fc
00000001000e5cb4 main (1, 0, 1, 504800, 504918, 100000000) + db8
00000001000db2bc _start (0, 0, 0, 0, 0, 0) + 17c
I am too lazy to run this through dem. -
Disp+work stop because of shared memory?
Hello Gurus, I have an SAP server that will not start. It was running previously, but after a parameter update and an instance restart, I cannot get the dispatcher running.
System is Windows 2012 Server, MSSQL 2008 R2, 16 Core 132 GB RAM.
I believe it is related to shared memory overlapping somehow, but I am not sure how to resolve or investigate. I have had issues previously with memory overlap halting SAP servers with Diagnostics Agents, but this server is not currently running any DAA. It is running SAPRouter and some SAP Web Dispatcher instances.
I will include my trace files below:
Please help!
DEV_W0:
trc file: "dev_w0", trc level: 1, release: "721"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 7210
M patchlevel 0
M patchno 100
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
M pid 7668
M
M kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7668) [dpxxdisp.c 1376]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 42864 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000000200050, size: 7174832)
M DpShMCreate: allocated sys_adm at 0000000000200060
M DpShMCreate: allocated wp_adm_list at 00000000002030B0
M DpShMCreate: allocated wp_adm at 00000000002032A0
M DpShMCreate: allocated tm_adm_list at 000000000020DA20
M DpShMCreate: allocated tm_adm at 000000000020DA70
M DpShMCreate: allocated wp_ca_adm at 0000000000750980
M DpShMCreate: allocated appc_ca_adm at 0000000000760390
M DpShMCreate: allocated comm_adm at 000000000076FDA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000008C1C40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 00000000008C1CF0
M DpShMCreate: allocated j2ee_adm at 00000000008C1D30
M DpShMCreate: allocated ca_info at 00000000008C2CB0
M DpShMCreate: allocated wall_adm at 00000000008C2D40
M DpCommAttachTable: attached comm table (header=000000000076FDA0/ft=000000000076FDB0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Fri May 16 01:23:14 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Fri May 16 01:23:15 2014
M ThInit: running on host SAPERP
M
M Fri May 16 01:23:16 2014
M calling db_connect ...
B Loading DB library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' is "721.02", patchlevel (0.44)
C Callback functions for dynamic profile parameter registered
C Thread ID:4168
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 100
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 44
C Last MSSQL DBSL patchcomment DBSL support for Microsoft ODBC Driver 11 for SQL Server (1816426)
C ODBC Driver chosen: SQL Server Native Client 11.0 native
C lpc:(local) connection used on SAPERP
C lpc:(local) connection used on SAPERP
C Driver: sqlncli11.dll Driver release: 11.00.3000
C GetDbRelease: 11.00.3339.00
C GetDbRelease: Got DB release numbers (11,0,3339,0)
B Connection 0 opened (DBSL handle 0)
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I
I Fri May 16 01:23:17 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000018030050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDAB0050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018470050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020480050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000020730050, size: 787488)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000020800050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 31056 bytes (50 server) at 0000000000910050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B
B Fri May 16 01:23:18 2014
B db_con_shm_ini: WP_ID = 0, WP_CNT = 19, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000027280160, size: 90000000, end: 000000002C854BE0)
B dbtbxbuf: Buffer TABLP (addr: 000000002C860160, size: 20480000, end: 000000002DBE8160)
B dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000011BE0050
B dbsync[db_syinit]: Buffer synchronisation started with
B sync_concept = SEQ_NR
B sendon = 1
B bufreftime = 120
B max_gap_wait_time = 60
B ddlog_del_time = 60
B last_counter = 702514
B oldest_gap = (2147483647,00000000000000)
B time_of_last_sync = 20140516012317
B MySysId = 'SAPERP 00'
B dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B semkey = 35
B shmkey = 54
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_SHM]: buffer ESM installed with
B semkey = 56
B shmkey = 65
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_CUA]: buffer CUA installed with
B semkey = 30
B shmkey = 47
B wp_n = 19
B sclass = 10
B block_length = 512
B max_objects = 1500
B max_obj_size = 626016
B pref_obj_size = 0
B est_large_obj_size = 98304
B free_vec_lg = 193
B hash_vec_size = 3001
B buffer_l = 3072000
B max_blocks = 4892
B free_blocks = 4892
B mutex_n = 3001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_OTR]: buffer OTR installed with
B semkey = 55
B shmkey = 64
B wp_n = 19
B sclass = 13
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 20480
B free_vec_lg = 81
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M rdisp/thwpsf_critical_path : -1 -> 0
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000034052380
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000382B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000382B06A0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 23104kb, dir_size: 22312kb.
A Attached to PXA (address 000007FFEDAE0050, size 300000K, 1 fragments of 276896K )
A PXA allocated (address 000007FFEDAE0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|272|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ATRA: pfclock execution time = 0
A abap/force_local_update_task=0
A ABAP ShmAdm attached (addr=000007DFDF142000 leng=20955136 end=000007DFE053E000)
A >> Shm MMADM area (addr=000007DFDF639B80 leng=242240 end=000007DFDF674DC0)
A >> Shm MMDAT area (addr=000007DFDF675000 leng=15503360 end=000007DFE053E000)
A RFC Destination> destination SAPERP_PRD_00 host SAPERP system PRD systnr 0 (SAPERP_PRD_00)
A RFC Options> H=SAPERP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
H HTTP> Parameter icf/ssocookie_mandatory set to 0
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:721.02]):
B max_blocking_factor = 50, min_blocking_factor = 5,
B max_in_blocking_factor = 255, min_in_blocking_factor = 10,
B max_union_blocking_factor = 50, min_union_blocking_factor = 5,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0
M ThrCreateShObjects allocated 39514 bytes at 0000000011C00050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 500000
Y ztta/diag_ara 250000
N SsfSapSecin: getenv(SECUDIR)=="E:\usr\sap\PRD\DVEBMGS00/sec"
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is E:\usr\sap\PRD\DVEBMGS00\exe\sapcrypto.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="E:\usr\sap\PRD\DVEBMGS00/sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPCRYPTOLIB 5.5.5C pl32 (Apr 2 2011) MT-safe
N =================================================
N
N Fri May 16 01:23:20 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 721, [7210.0.100.20020600]
W ITS Plugin: Int.version, [34]
W ITS Plugin: Feature set: [31]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N SPNegoInit: SPNego disabled ("spnego/enable" not set to 1)
N VSI: WP init in ABAP VM completed with rc=0
E EnqLockTableSizeCalculate: session quota = 100%
E EnqLockTableAttach2: attach to lock table (size = 33554432)
E EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE
E EnqId_Initialize: local EnqId initialization o.k.
M
M Fri May 16 01:23:40 2014
M *** ERROR => ThPlgConnectToIcm: IcmReadAck failed (-8, ni_rc=-6) [thxxplg.c 5172]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11348]
M
M Info for wp 0
M
M pid = 7668
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7668) [dpnttool.c 339]
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 4924
kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4924) [dpxxdisp.c 1314]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Fri May 16 01:23:12 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPERP_PRD_00 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000005460050, size: 7174832)
DpShMCreate: allocated sys_adm at 0000000005460060
DpShMCreate: allocated wp_adm_list at 00000000054630B0
DpShMCreate: allocated wp_adm at 00000000054632A0
DpShMCreate: allocated tm_adm_list at 000000000546DA20
DpShMCreate: allocated tm_adm at 000000000546DA70
DpShMCreate: allocated wp_ca_adm at 00000000059B0980
DpShMCreate: allocated appc_ca_adm at 00000000059C0390
DpShMCreate: allocated comm_adm at 00000000059CFDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000005B21C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000005B21CF0
DpShMCreate: allocated j2ee_adm at 0000000005B21D30
DpShMCreate: allocated ca_info at 0000000005B22CB0
DpShMCreate: allocated wall_adm at 0000000005B22D40
DpCommAttachTable: attached comm table (header=00000000059CFDA0/ft=00000000059CFDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
Fri May 16 01:23:13 2014
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 134981MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 134984MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 33745 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1700]
Fri May 16 01:23:40 2014
***LOG Q0K=> DpMsAttach, mscon ( SAPERP) [dpxxdisp.c 12667]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
*** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 19121]
Fri May 16 01:24:20 2014
*** ERROR => DpHdlDeadWp: W0 (pid 7668) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W1 (pid 7456) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W2 (pid 8096) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W3 (pid 4376) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W4 (pid 3000) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W5 (pid 3520) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W6 (pid 7024) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W7 (pid 6172) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W8 (pid 6576) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W9 (pid 7756) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W10 (pid 624) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W11 (pid 7468) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W12 (pid 1176) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W13 (pid 6812) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W14 (pid 6968) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W15 (pid 5036) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W16 (pid 5576) died (severity=0, status=0) [dpxxwp.c 1729]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:30 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri May 16 07:24:30 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Fri May 16 07:24:30 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 1 | 33 | 2000 | 43 | 42 |
+------+--------+--------+--------+------------+------------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 1 | 1 | 2000 | 1 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 40
wake_evt_udp_now 0
wake events total 40, udp 5 ( 12%), shm 35 ( 87%)
since last update total 40, udp 5 ( 12%), shm 35 ( 87%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.055556 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.056 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.011111 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.011 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Fri May 16 07:24:30 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 01:23:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Fri May 16 07:24:30 2014
=============================
Slots: 1000, Used: 2, Max: 46
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
| 546 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:35 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPERP_PRD_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SAPERP_PRD_00 ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 41)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (7752) (SOFT_KILL)
DpHalt: stop icman
killing process (5940) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1440 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1440 (pos=3)
SiSelNRemove: removed sock 1440
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/3)
NiICloseHandle: shutdown and close hdl 25/sock 1440
NiBufIClose: clear extension for hdl 25
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1400225080/234000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:7752 HANDLE:1300)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:36 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:7752 HANDLE:1300 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:44 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:5940 HANDLE:1296 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPERP_PRD_00 , sapsysnr= 0, hostname=SAPERP
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 000007F7B2BB1470
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Fri May 16 01:24:45 2014
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13064]
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAPERP / 3900)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 1400 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 1400 (pos=2)
SiSelNRemove: removed sock 1400
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=7
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 44)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 1400
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SAPERP / 3900)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4924) [dpxxdisp.c 11574]
DpHalt: Good Bye .....
SAPSTARTSRV
trc file: "sapstartsrv.log", trc level: 0, release: "721"
pid 6196
[Thr 6528] Fri May 16 00:38:09 2014
SAP HA Trace: SAP Microsoft Cluster library '721, patch 100, changelist 1397439' initialized
CCMS agent initialization for instance type ABAP: return code 0.
CCMS agent start: return code 0.
Initializing SAPControl Webservice
Starting AutoRestart thread
AutoRestart thread started, version check is enabled
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port \\.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
\sapadmin is starting SAP System at 2014/05/16 0:38:18
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 0:49:10
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is starting SAP System at 2014/05/16 0:50:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 1:21:22
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\prdadm is starting SAP System at 2014/05/16 1:23:04
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]Hi Alwina, here is the DEV_ICM trace:
From this trace, it appears that it is listening to 65000?
Netstat shows that the system is listening to 127.0.0.1:65000 .
Other SAP ports show listening on 0:0:0:0:xxxx , is ICM listening on 127 a problem?
trc file: "dev_icm", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 43
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 5940
[Thr 1812] Fri May 16 01:23:13 2014
[Thr 1812] Parameter system/type has value: "ABAP"
[Thr 1812] started security log to file ./dev_icm_sec
[Thr 1812] ICM running on:
[Thr 1812] MtxInit: 30001 0 2
[Thr 1812] ***LOG IM1=> IcmInit, Startup (ICM&SAPERP.CORP.CANSEL.CA&5940&) [icxxman.c 1934]
[Thr 1812] IcmInit: listening to admin port: 65000
[Thr 1812] DpSysAdmExtCreate: ABAP is active
[Thr 1812] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
[Thr 1812] DpIPCInit2: read dp-profile-values from sys_adm_ext
[Thr 1812] DpShMCreate: sizeof(wp_adm) 42864 (2256)
[Thr 1812] DpShMCreate: sizeof(tm_adm) 5517056 (27448)
[Thr 1812] DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
[Thr 1812] DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
[Thr 1812] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
[Thr 1812] DpShMCreate: sizeof(comm_adm) 1384080 (2744)
[Thr 1812] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
[Thr 1812] DpShMCreate: sizeof(slock_adm) 0 (296)
[Thr 1812] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
[Thr 1812] DpShMCreate: sizeof(file_adm) 0 (80)
[Thr 1812] DpShMCreate: sizeof(vmc_adm) 0 (2160)
[Thr 1812] DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
[Thr 1812] DpShMCreate: sizeof(gw_adm) 48
[Thr 1812] DpShMCreate: sizeof(j2ee_adm) 3952
[Thr 1812] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000022F0050, size: 7174832)
[Thr 1812] DpShMCreate: allocated sys_adm at 00000000022F0060
[Thr 1812] DpShMCreate: allocated wp_adm_list at 00000000022F30B0
[Thr 1812] DpShMCreate: allocated wp_adm at 00000000022F32A0
[Thr 1812] DpShMCreate: allocated tm_adm_list at 00000000022FDA20
[Thr 1812] DpShMCreate: allocated tm_adm at 00000000022FDA70
[Thr 1812] DpShMCreate: allocated wp_ca_adm at 0000000002840980
[Thr 1812] DpShMCreate: allocated appc_ca_adm at 0000000002850390
[Thr 1812] DpShMCreate: allocated comm_adm at 000000000285FDA0
[Thr 1812] DpShMCreate: system runs without slock table
[Thr 1812] DpShMCreate: system runs without file table
[Thr 1812] DpShMCreate: allocated vmc_adm_list at 00000000029B1C40
[Thr 1812] DpShMCreate: system runs without vmc_adm
[Thr 1812] DpShMCreate: allocated gw_adm at 00000000029B1CF0
[Thr 1812] DpShMCreate: allocated j2ee_adm at 00000000029B1D30
[Thr 1812] DpShMCreate: allocated ca_info at 00000000029B2CB0
[Thr 1812] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
[Thr 1812] MPI: dynamic quotas disabled.
[Thr 1812] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 1812] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
[Thr 1812] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
[Thr 1812] Fri May 16 01:23:14 2014
[Thr 1812] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
[Thr 1812] IcmCreateWorkerThreads: created worker thread 0
[Thr 1812] IcmCreateWorkerThreads: created worker thread 1
[Thr 1812] IcmCreateWorkerThreads: created worker thread 2
[Thr 6912] IcmProxyWatchDog: proxy watchdog started
[Thr 1812] IcmCreateWorkerThreads: created worker thread 3
[Thr 1812] IcmCreateWorkerThreads: created worker thread 4
[Thr 1812] IcmCreateWorkerThreads: created worker thread 5
[Thr 1812] IcmCreateWorkerThreads: created worker thread 6
[Thr 1812] IcmCreateWorkerThreads: created worker thread 7
[Thr 1812] IcmCreateWorkerThreads: created worker thread 8
[Thr 1812] IcmCreateWorkerThreads: created worker thread 9
[Thr 4024] IcmMpiWatchDogThread: MPI watchdog started
[Thr 4400] IcmWatchDogThread: watchdog started
[Thr 6524] HttpISubHandlerAdd: Added handler HttpFileAccessHandler(000000000C2E2750), slot=0, flags=4098) for /sap/public/icmandir/, active: 1, table 000000000C2E24C0
[Thr 6524] ISC: created 400 MB disk cache.
[Thr 6524] ISC: created 50 MB memory cache.
[Thr 6524] HttpISubHandlerAdd: Added handler HttpCacheHandler(000000000C3EB4B0), slot=1, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/icmadmin.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAdminHandler(000000000C461480), slot=2, flags=36869) for /sap/admin, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpModHandler(000000000C461570), slot=3, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] CsiInit(): Initializing the Content Scan Interface
[Thr 6524] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 6524] CsiInit(): CSA_LIB = "E:\usr\sap\PRD\DVEBMGS00\exe\sapcsa.dll"
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAuthHandler(000000000C4615F0), slot=4, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpSAPR3Handler(000000000C4AFAE0), slot=5, flags=1052677) for /, active: 1, table 000000000C2E24C0
[Thr 6524] Started service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 6524] Started service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 6524] Fri May 16 01:23:18 2014
[Thr 6524] IcmNetCheck: network check passed without detecting problems
[Thr 4268] Fri May 16 01:23:24 2014
[Thr 4268] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/ITS.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 8156] Fri May 16 01:24:14 2014
[Thr 8156] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c 481]
[Thr 5948] Fri May 16 01:24:24 2014
[Thr 5948] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c 2598]
[Thr 6912] Fri May 16 01:24:44 2014
[Thr 6912] IcmProxyWatchDog: Shutdown request received
[Thr 4400] IcmWatchDogThread: Shutdown request received
[Thr 6912] *** IcmProxyWatchDog: exit thread ***
[Thr 4024] *** IcmMpiWatchDogThread: exit thread ***
[Thr 4400] *** IcmWatchDogThread: exit thread ***
[Thr 1812] IcmLoop: Shutdown request received
[Thr 1812] Deactivated service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Deactivated service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] Removed service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Removed service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] *** ICM shutdown completed (pid: 5940) *** -
Is XML Publisher causing shared memory problem..?
Hi Experts,
Since this week, many of the Requisition/PO are erroring out with the below errors or similar to these errors:
- ORA-04031: unable to allocate 15504 bytes of shared memorny ("sharedpool","PO_REQAPPROVAL_INIT1APPS","PL/SQL MPCODE","BAMIMA: Bam Buffer")
ORA-06508: PL/SQL: could not find program unit being called.
-Error Name WFENG_COMMIT_INSIDE
3146: Commit happened in activity/function
'CREATE_AND_APPROVE_DOC:LAUNCH_PO_APPROVAL/PO_AUTOCREATE_DOC.LAUNCH_PO_APPROVAL'
Process Error: ORA-06508: PL/SQL: could not find program unit being called
Few days back we were getting heap memory error for one of the XML Publisher report.
I heard that XML Publisher requires lot of memory for sources/features,So I want to know whether XML Publisher can be one of the cause for memory problem to occur or this shared memory is not related with XML Publisher sources at all.
Please advice.
Many thanks..
Suman
Edited by: suman.g on 25-Nov-2009 04:03Hi Robert,
Thanks for your quick reply...
Apps version: 11.5.10.2
database version: 9.2.0.8.0
As I am a beginner in this so dont know much about this.. Can you please guide me on this.
DBAs has increased the shared memory and problem has resolved but here I am more concrened whether the XML Publisher was or can be one od the cause for shared memory problem. Is there any way to check that or this occurs randomly and we can not check this.
Please advice something. -
Multiple Users Accessing Shared Memory
I created a shared memory enabled class, and it works great for a simple scenario. But, it's currently not sufficient for my needs. Here's an example of what I'm trying to accomplish, and the events happen in this order!
User 1 writes data XXX to shared memory.
User 2 writes data YYY to shared memory.
User 1 reads from shared memory and I want him to get his data (XXX).
User 2 reads from shared memory and I obviously want him to get his YYY.
I do have a key I can use to differentiate my data but I don't know how to incorporate that in my process.
Is the solution to write a table, rather than my current simple structure, to my shared memory? But if I do this how do I clean off the "used" row after it is read?
Or is the solution to use some sort of instance of my class and reference the appropriate instance on each read?
Here's my write:
data: lo_shared_area type ref to z_cl_rdn_shared_area,
lo_root type ref to z_cl_rdn_memory.
****get a pointer to the Shared Area
lo_shared_area = z_cl_rdn_shared_area=>attach_for_write( ).
****Create an instance of our root
create object lo_root area handle lo_shared_area.
****Set the Initial value for our message
lo_root->set_ptwy( ps_ptwy ).
****Set the root back into the Area
lo_shared_area->set_root( lo_root ).
****Commit and detatch
lo_shared_area->detach_commit( ).
Here's my read:
data: lo_shared_area type ref to z_cl_rdn_shared_area,
lo_root type ref to z_cl_rdn_memory.
lo_shared_area = z_cl_rdn_shared_area=>attach_for_read( ).
lo_root = lo_shared_area->root.
try.
ls_ptwy = lo_root->get_ptwy( ).
catch cx_root.
clear ls_ptwy.
endtry.
lo_shared_area->detach( ).
Thanks,
MikeHello,
Clearing shared memory will crash SAP ie cleanipc.
Need to increase memory parameters
Check notes...
146289 Parameter Recommendations for 64-Bit SAP Kernel
146528 "Configuration of R/3 on hosts with much RAM".
regards,
John Feely -
ORA-27101: shared memory realm does not exist after kernel upgrade
Hi,
I have installed ECC 6.0 on windows 32 bit. After I upgraded the kernel, the database can't be started as well as SAP. When I checked the logs, the error ORA-27101: shared memory realm does not exist was encountered.
M calling db_connect ...
C Prepending E:\usr\sap\ERP\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
B ***LOG BV3=> severe db error 1034 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1034 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
Please help.
Thanks.
Regards.Hi. First restart the server, then start the LISTENER, and repeat startsap again. Check if messages repeated. Regards.
-
hi
in BW PRD while executing a report we are getting an error
error message " AN EXCEPTION WITH TYPE CX_SY_EXPORT_NO_SHARED_MEMORY OCCURED, NO SPACE LEFT IN SHARED MEMORY"
Edited by: sarat chandra bomma reddy on Apr 1, 2008 8:45 AMAt OS level run :
sappfpar check pf=<instance profile name>
and correct the values mentioned in the instance profile as suggested in the error list.
or you need to increase the Shared pool size in the DB profile. -
Error message: ORA-27125: unable to create shared memory segment Linux-x86_
Hi,
I am doing an installtion of SAP Netweaver 2004s SR3 on SusE Linux 11/Oracle 10.2
But i am facing the follow issue in Create Database phase of SAPInst.
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step :Caught ESAPinstException in Modulecall: ORA-27125: unable to create shared memory segment Linux-x86_64 Error: 1: Operation not permitted Disconnected
Please help me to resolve the issue.
Thanks,
NishithaHi Ratnajit,
I am too facing the same error but my ORACLE is not starting,
Here are my results of following command:
cat /etc/sysctl.conf
# created by /sapmnt/pss-linux/scripts/sysctl.pl on Wed Oct 23 22:55:01 CEST 2013
fs.inotify.max_user_watches = 65536
kernel.randomize_va_space = 0
##kernel.sem = 1250 256000 100 8192
kernel.sysrq = 1
net.ipv4.conf.all.promote_secondaries = 1
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.default.promote_secondaries = 1
net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.neigh.default.gc_thresh1 = 256
net.ipv4.neigh.default.gc_thresh2 = 1024
net.ipv4.neigh.default.gc_thresh3 = 4096
net.ipv6.neigh.default.gc_thresh1 = 256
net.ipv6.neigh.default.gc_thresh2 = 1024
net.ipv6.neigh.default.gc_thresh3 = 4096
vm.max_map_count = 2000000
# Modified for SAP on 2013-10-24 07:14:17 UTC
#kernel.shmall = 2097152
kernel.shmall = 16515072
# Modified for SAP on 2013-10-24 07:14:17 UTC
#kernel.shmmax = 2147483648
kernel.shmmax = 67645734912
kernel.shmmni = 4096
# semaphores: semmsl, semmns, semopm, semmni
kernel.sem = 250 32000 100 128
fs.file-max = 65536
net.ipv4.ip_local_port_range = 1024 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
And here is mine Limit.conf File
cat /etc/security/limits.conf
#<domain> <type> <item> <value>
#* soft core 0
#* hard rss 10000
#@student hard nproc 20
#@faculty soft nproc 20
#@faculty hard nproc 50
#ftp hard nproc 0
#@student - maxlogins 4
# Added for SAP on 2012-03-14 10:38:15 UTC
#@sapsys soft nofile 32800
#@sapsys hard nofile 32800
#@sdba soft nofile 32800
#@sdba hard nofile 32800
#@dba soft nofile 32800
#@dba hard nofile 32800
# End of file
# Added for SAP on 2013-10-24
# soft nproc 2047
# hard nproc 16384
# soft nofile 1024
# hard nofile 65536
@sapsys soft nofile 131072
@sapsys hard nofile 131072
@sdba soft nproc 131072
@sdba hard nproc 131072
@dba soft core unlimited
@dba hard core unlimited
soft memlock 50000000
hard memlock 50000000
Here is mine cat /proc/meminfo
MemTotal: 33015980 kB
MemFree: 29890028 kB
Buffers: 82588 kB
Cached: 1451480 kB
SwapCached: 0 kB
Active: 1920304 kB
Inactive: 749188 kB
Active(anon): 1136212 kB
Inactive(anon): 39128 kB
Active(file): 784092 kB
Inactive(file): 710060 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 33553404 kB
SwapFree: 33553404 kB
Dirty: 1888 kB
Writeback: 0 kB
AnonPages: 1135436 kB
Mapped: 161144 kB
Shmem: 39928 kB
Slab: 84096 kB
SReclaimable: 44400 kB
SUnreclaim: 39696 kB
KernelStack: 2840 kB
PageTables: 10544 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 50061392 kB
Committed_AS: 1364300 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 342156 kB
VmallocChunk: 34359386308 kB
HardwareCorrupted: 0 kB
AnonHugePages: 622592 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 67584 kB
DirectMap2M: 33486848 kB
Please let me know where i am going wrong.
Wat thing basically u check on /proc/meminfo command
Regards,
Dipak -
Tried to set up shared memory more than once?
Hi all,
Im getting a pop up error on 10.7.3.. It pops up very fast and is almost impossible to read.
Having checked the console, this is the error..
01/04/2012 13:59:12.457 com.apple.launchd.peruser.501: (com.facebook.videochat.'MyName'.updater[486]) Tried to setup shared memory more than once
(Ive edited out my name from the string..)
Can anyone tell me how to fix this?
Thanks!I think this is a bug in some facebook-related software you have installed.
Maybe update facebook stuff. -
Oracle Error 'ORA-27102: out of memory' - Shared memory parameters correct.
Advice please!
We’ve recently shut down our Oracle test server in order to increase file system capacity. When we rebooted some of the databases wouldn’t start up. It started the first 4 instances and then errored out saying “ORA-27102: out of memory“.
I’m pretty sure it’s nothing to do with the file system because we actually reverted back to the old file system and the databases still wouldn’t start. I think it’s more likely that something’s gone awry whilst the databases were actually running, and the problem has only manifested itself once we stopped and restarted them.
I have researched the error and forud this artical and similar: http://var-adm.blogspot.co.uk/2013/04/adjust-solaris-10-shared-memory-to.html
Everything suggests that Oracle is trying to create a larger shared memory segment than is allowed. The thing is, we’ve never changed our shared memory settings, and one minute it was working, the next it isn’t. To confirm this I checked the shared memory, which is as follows:
sswift4# prctl -n project.max-shm-memory $$
process: 926: bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 7.64GB - deny -
system 16.0EB max deny -
As suggested in the above article, I checked the alert log and found the ‘WARNING: EINVAL’ message which is as follows:
WARNING: EINVAL creating segment of size 0x000000005e002000
Converting this to decimal, it’s trying to create something of 1.5 GB, well within the shared memory settings, which suggests that this isn’t the problem.
We are running Oracle 10g and 11g on Solaris 10 Sparc. The error does not seem to be instance specific, we have 8 instances on this box all with SGA max of 2000m. The server has 32GB of memory available.
Any advice would be helpful.
Thanks in advance.
DebsThanks for your quick responses - we have now resolved the issue.
The shared memory value was set on the command line but not saved.
Therefore once we rebooted it lost the configuration. this has been altered by our UNIX admin and all DBs have started without issue.
Thanks
Debs -
I am getting the following warning for my SSIS08 package:
Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I did check Warning in SSIS 2008 , but didn't find any solution.
The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
Thanks,
SonalI am getting the following warning for my SSIS08 package:
Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
I did check
Warning in SSIS 2008 , but didn't find any solution.
The package processes data and executes fine , but why do I see this warning? When I run this package on my machine, I see no such warning, it's only when I deploy it to our DEV SSIS server, I get this warning.
Thanks,
Sonal
You have to include the account you use to execute the package in the performance counters group.
SSIS Tasks Components Scripts Services | http://www.cozyroc.com/
Could you tell me where is "performance counters" group, I can not find it.
Thanks ! -
How do I remove a DB from shared memory in Solaris 10?
I'm having trouble removing an in-memory database placed in shared memory. I set SHM key and cache size, and then open an environment with flags: DB_CREATE | DB_SYSTEM_MEM | DB_INIT_MPOOL | DB_INIT_LOG | DB_INIT_LOCK | DB_INIT_TXN. I also set the flag DB_TXN_NOSYNC on the DbEnv. At the end, after closing all Db and DbEnv handles, I create a new DbEnv instance and call DbEnv::remove. That's when things get weird.
If I have the force flag set to 0, then it throws an exception saying "DbEnv::remove: Device busy". The shared memory segments do not get removed in this case (checking with `ipcs -bom`).
When the force flag is set to zero, the shared memory is released but the program crashes saying "Db::close: BDB0087 DB_RUNRECOVERY: Fatal error, run database recovery".
What am I doing wrong?This is curious, since a simple program similar to what is described is known to work. I've modified the standard sample program examples/cxx/EnvExample.cpp C++ to use an in-memory database, DB_SYSTEM_MEM, and DB_TXN_NOSYNC. The "Device busy" symptom occurs if the close of the environment handle is bypassed. I have not been able to reproduce the DB_RUNRECOVERY error.
How does the program's use of Berkeley DB different from what is provided in EnvExample.cpp?
Is it possible to send me the relevant portions of it?
Regards,
Charles Koester
Oracle Berkeley DB -
RTC: Enabling Error Checking SEGV
I can't get memuse checking to run in dbx:
dbx -V
Sun Dbx Debugger 7.6 SunOS_i386 Patch 124873-06 2008/08/20
Running: testXmlLight
(process id 18996)
Reading rtcapihook.so
Reading libdl.so.1
Reading rtcaudit.so
Reading libmapmalloc.so.1
Reading libgen.so.1
Reading rtcboot.so
Reading librtc.so
RTC: Enabling Error Checking...
t@1 (l@1) signal SEGV (no mapping at the fault address) in __rtc_fatal_error_impl at 0xf3111e76
0xf3111e76: __rtc_fatal_error_impl+0x00f6: movl $0x00000001,0x00000000(%eax)
dbx: Stopped within call to '__rtc_init'. Starting new command interpreter
dbx: Call to '__rtc_init' terminated. Going back to previous command interpreter
dbx: internal warning: librtc initialization failed
dbx: librtc.so and dbx version mismatch; Error checking disabled
Check your installation of librtc.so.
alloc internal error: empty Block list in afree!
dbx: internal error: signal SIGABRT (sent by lwp_kill())The environment looks clean:
set | grep LD
OLDPWD=/home/ian
more /etc/release
Solaris Express Community Edition snv_101 X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 20 October 2008
The test application as a simple hello world. I get the same failure for all targets.
(dbx) where
=>[1] lwpkill(0x1, 0x6, 0xffffff02dec204c0, 0xfffffd7fff143cde, 0x12, 0x0), at 0xfffffd7fff14337a
[2] thr_kill(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff1379bd
[3] raise(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff0e6591
[4] abort(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff0bcba1
[5] 0x54f72b(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x54f72b
[6] __sighndlr(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff13a166
[7] call_user_handler(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff12d4df
[8] sigacthandler(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff12d6ee
---- called from signal handler with signal 6 (SIGABRT) ------
[9] lwpkill(0x1, 0x6, 0xffffff02dec204c0, 0x5, 0x0, 0x20), at 0xfffffd7fff14337a
[10] thr_kill(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff1379bd
[11] raise(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff0e6591
[12] abort(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0xfffffd7fff0bcb25
[13] afree(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x710087
[14] set_prompt_field(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x70c2bd
[15] pdksh_pprompt(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x715234
[16] MyServantDbx::cleanup_cmd(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x5dc91d
[17] MyServantDbx::ksh_cmd(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x5dcb0b
[18] ServantDbx::decode_ksh_cmd(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x734659
[19] Dispatcher::dispatch(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x749e17
[20] Messenger::handle_message_help(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x746a38
[21] Messenger::handle_message(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x7467ad
[22] Servant::cb_message(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x73c122
[23] CBInfo::dispatch(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x737c10
[24] Notifier::invoke(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x737ff0
[25] NotifierDirect::dispatch_help(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x7386b2
[26] NotifierPoll::dispatch(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x738ec9
[27] NotifierDirect::loop(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x7387d5
[28] 0x5da61f(0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xfffffd7fffdff380, 0xfffffd7fff0bdca0, 0x0, 0x99ddc0, 0xa00b60, 0xa00b60, 0x40, 0x0, 0xfffffd7fffdff4c0, 0x712a18, 0x99e000, 0x99dfc0, 0x9a8fb0, 0xfffffd7fffdff420), at 0x5da61f
[29] 0x714cfa(0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x99e000, 0x99dfc0), at 0x714cfa
[30] yylex(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x712a18
[31] yyparse(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x710830
[32] compile(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x712798
[33] pdksh_shell(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x70d7eb
[34] main_cmd_loop(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x552f0c
[35] main(0x0, 0x0, 0x0, 0x0, 0x0, 0x0), at 0x553895
(dbx)
Maybe you are looking for
-
How can I delete an email not in my address book but remembered by Mail?
If I type the name of a friend eg "Sam" into the address line, I expect it to pull the "Sam" from my address book. But mail remembers emails for "Sam" that I don't want to use, in its history. Can I delete them one by one, or all at once?
-
We use the ALE process to create Purchase Orders automaticaly from Sales orders. The standard function module assigned to the Business Object BUS2032 in SWETYPV for ALECREATE is PUR_ORDER_CREATE_VIA_SD_EVNT SAP creates a PR and then converts it into
-
How Can I add special characters?
Hi, How can I add specisl characters like arrows to the clips... Thanks for help...
-
New Bluetooth Keyboard Not Working with iMac 2005
I just purchased a refurbished 2009 wireless Mac keyboard for my computer at work to replace the old outdated one. However, when I try getting it to connect I encounter a problem. While its being picked up by the bluetooth just fine, it tells me that
-
Can't open Editor at all- using PSE 8 on XP
I tried to install actions from Pioneer Woman's site. Everything went fine, but the actions weren't there when it was all said and done. I did it all again, still no luck. Now Editor won't open at all (even though the computer claims that it is ru