"Dead stock" report
Hi,
We want to convert some LIS-reports, like "dead stock" and "Inventory turnover" to a BW report. I have activated InfoCube 0IC_C03.
Does anybody have experience to create a "Dead stock" report in BW(Dead stock is the part of your warehouse stock that has not been used for a certain period of time.)? Which info cube is used?
Regards,
Wim
Hi,
I Hope, Slow moving materials (0IC_MC01) Multi provider will help you.
http://help.sap.com/saphelp_bw32/helpdata/en/40/cb051118bd3549a9e39958561fdf8e/frameset.htm
Re: How to display Fat/Medium/Slow moving materials in Query
With rgds,
Anil Kumar Sharma .P
Kindly Assign the points,If it give you some light
Message was edited by: Anil Kumar Sharma
Similar Messages
-
Dead Stock Report Analysis in MC50
Hi expert
i am trying to work om Dead Stock Report. i had Run a Tcode MC50, in the report i have fine following
MAterial No----
10000
Current Stock----
6,215.327 KG
Average Stock----
6,215.327 KG
Dead Stock----
6,215.327 KG
Dead Stock Value----- 17,533,120.07 INR
Percentage----
1.95 %
*** Percentage.-------18.80 %
i want to verify all that above , data ic showing correct or not
i have check in material master, i am getting
Moving price -
254.93
Total stock -
1115.463
Total Value----
284364.78
in MMBE total Stock is showing is 6597
regard
nabilhi,
MB51 or mmbe
sans. -
Dead stock report - tables regarding
hi ,
i need the name of the table and the key field which used to take the dead stock report.
i.e. 6 months non moving materials list i want with stock values.
kindly forward your suggestions.
GiriHi ,
The tcode which you have provided is useful.....but i require the table and the field which required to generate the report....
My purpose is : basiscally i am generating the list off materials which is not consumed for more than six months..... )
do we have any table which stores data in the following format required by me ...
Materialno,plant,stock,last_consumed_date...
For your information -we can get this information from Goods received table and calculate it.... but this is a time consuming process.... that is why i am looking for a materialwise last consumption date.
looking forward to your suggestions further -
Slow Moving/Dead Stock Report
Hi Guys
BEsides T.COdes MC46 and MC50 what other reports that are available on SAP to give the same information and also their Current Stock Balances
VishnuHi,
Why do you need other reports?
What is it that these reports cannot provide?
If we can know what you want from the report we can perhaps suggest options. But these two reports are designed to provide the information relating to slow / dead stock and so they should be very useful?
Steve B -
Good day to all.
We use the MC50 report to identify obsolete stock. We use a one plant system with various storage locations dispersed throughout the geographical area of our company. The problem we have is that the MC50 report as input parameters requires the plant and cannot be run per storage location, thus identifying obsolete stock per such location.
We are considering a customization but have been advised that the development will require extensive development as result of the main program having several includes which contain SAP standard function modules.
We are attempting to establish if there are other SAP users who encountered the same scenario and if so if there is not perhaps a simplified solution to extract the obsolete stock report per storage location as opposed to plant level.
Best Regards
Mike Olwagen
Manager SAP Solution Support
City Power Johannesburg (Pty) LtdHi,
In this regard to my understanding, we may use BI reports to extract the Dead Stock per storage location.
The Plant having the SLoc data can be pooled in the BI Interface, wherein selection criteria will be there to select respective SLoc having the Dead Stocks. The tables can be customized according to the requirement of the user in BI reports.
Regards,
Dhrubajit -
Dead stock or slow moving items reports
tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharmapls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma -
what is the logic of dead stock report that is MC50,
what is the logic of slow moving stock report that is MC46,
and do we have any standard report for fast moving stock as well ?Hi Rahul
Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
Dead stock is the part of your warehouse stock that has not been used for a certain period of time
for further details pls refer
link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
T code :MC44 for fast moving stocks
Thnx and Regards
Vikrant -
Hi Expert
Please Help Me ......
I think dead stock is non-moving for time of period but I don't understand MC50
when I run MC50 in period of time 02/01/2008 - 09/04/2008.
I find stock movements for material :
Posting Date GR GI Stock level
26.12.2007 2 1 1
04.01.2008 2 1 2
07.01.2008 3 1 4
29.02.2008 0 2 2
03.04.2008 10 0 12
09.04.2008 0 0 12
I don't know why 's dead stock for time of period have transaction movement ????
Thank.Hi,
Dead stock is the minimum stock maintained for the period you analyse.
If you keep change the period range the Dead Stock value may also keep change, because the min. stock qty. for each period range might have changes.
If a material was not used for 1 year ( ex: qty. 100), if you run the dead stock report for any of the last 12 months , system will show the same value...
Hope it is clear.
Thanks,
Kumar Arcot -
Report on Dead stock and Slow moving stock
Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
DevaHi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB -
Stock Analysis : Dead Stock : More than 60 Days.- Report
Dear SAPians
Good Evening
I need a SAP report i want to know if there is a SAP standard report i dontr want to have a Z-Report. My requirement is
<b>Stock Analysis : Dead Stock : More than 60 Days.</b>Required Fields are
<b>Item code Description S.Loc Qty Value.</b>
Pls ssuggest me .
Thank You
with regards
Moosa Anis
+91 9922 577 477 / +91 99608 47444MC50 or MB5M use for dead stock
-
Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
RangHi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle -
HI..
i m an abaper...
i hv to show dead stock and dead stock value in a report for a given period of time here i m using table mbew but in this table only the current stock is given so how will i show it for a period of time suppose from july to dec..should i add some logic for it or can i use another table....how do u calculate dead stock and dead stock value for a given period of time....plz help me
nullHi
please check this:
http://help.sap.com/saphelp_46c/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
click on Document Evaluation: Overview
regards
Srinivas -
hi all
can we have std report in sap for mat no , stock type ,qty in a plant
laxmnDear Laxman,
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME2O SC Stock Monitoring (Vendor)
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Regards,
Naveen. -
Dear all
In transaction MC50 ,Key figure dead stock ,
for a particular matrial for a period of 13.12.2008 to 13.03.2009
it is giving GR,GI and stock level posting datewise say on 13.03.2009,stock is 25
In what angle system is giving analysis?
Please explain me the use of MC50Dear GB,
1. If you run MC50 for current date it will show you current stock as a dead stock. System considers all stock lying in system as dead as it is not used.
2. If you run the report for previous period, system will dynamically calculates the stock by considering all receipts and issues.
Nilesh -
Closing stock report with GRPO
Hai all
Please help me to write this query,
For example
I have query to take closing stock report ,but my requirement is ,i want split up for Closing stock and closingvalue
like, if i have 40 closing stock means i want details how 40 is arrived
for example i run closing stock report as on 2009-03-31
means i want this format
Itemcode ClosingStock Closing value
ITM001 40 460
ITM002 20 210.......
ItemCode GRPOno. VendorCode quantity Rate GRPO Date
ITM001 10001 V0001 10 10 2009-02-01
ITM001 10002 V0002 20 11 2009-03-15
ITM001 10003 V0003 10 14 2009-03-31
ITM002 10021 V0011 10 10 2009-02-11
ITM002 10022 V0015 10 11 2009-03-14Hai Jeyakanthan A
I want small change in your query
SELECT T0.ItemCode,T0.TransType, SUM(T0.InQty)-SUM(T0.OutQty) AS 'Closing Stock',SUM(T0.OpenValue) as 'Balance' FROM OINM T0
*where docdate <= '[%0]'*
GROUP BY T0.ItemCode,T0.TransType
Having
T0.TransType = 20 ORDER BY T0.ItemCode,T0.TransType
I tried this query for taking closing stock for given date, its giving me correct result
SELECT T0.ItemCode, T0.Ref1, T0.CardCode, T0.InQty, T0.Price, T0.DocDate FROM OINM T0 WHERE T0.TransType = 20 AND
(T0.DocDate >= '[%0]' AND
T0.DocDate <= '[%1]') ORDER BY T0.ItemCode, T0.Ref1, T0.CardCode, T0.InQty, T0.Price, T0.DocDate
In this query i want only the GRPO no,date,price.... for closing stock quantity
Edited by: Prasanna s on May 14, 2009 12:39 PM
Maybe you are looking for
-
Can't download driver from this website
I was trying to download Thinkpad X61s driver but the dialog box gave error messae everytime on every borowser. Please help!!! Thanks,
-
Latest Bootcamp drivers (June 2010) comatible with Windows XP 54 Bit?
Hi I am planning on updating my existing BootCamp partition to windows Xp 64 Bit edition on my MacBook Pro so it uses all my 4 gigs of RAM but I was wandering if the latest drivers would be compatible with it because in the description of the latest
-
[Solved] Decrypt files securely inside lxc container.
Hi, this is my first question, I've been using Arch for 5 years now, thanks for all your hard work! I'm trying to setup an lxc container to securely view encrypted files(gpg keys encrypted with cryptsetup and a loopback device), I've done so already
-
OS 10.3.8 don't boot in my iMac 266 MHz!
Hi. I just got a green 266MHz iMac with 64MB Ram. The CD is not working! I have installed 10.3.8 from my Cube on the iMac:s HD fitted in a FireWire case. The HD is 6GB. The 266MHz iMac don't boot, only a map with a questionmark sign up! The same HD b
-
Free song is not free again this week. So far...
Cash Machine 3:42 Hard-FI Cash Machine - Single $0.99 This is the info for the free song this week. So far it has not been changed to FREE. Be careful, if you download it now you'll be charged $.99. Sorry to sound like a broken record. But Apple need