Slow Moving/Dead Stock Report
Hi Guys
BEsides T.COdes MC46 and MC50 what other reports that are available on SAP to give the same information and also their Current Stock Balances
Vishnu
Hi,
Why do you need other reports?
What is it that these reports cannot provide?
If we can know what you want from the report we can perhaps suggest options. But these two reports are designed to provide the information relating to slow / dead stock and so they should be very useful?
Steve B
Similar Messages
-
Hi,
We want to convert some LIS-reports, like "dead stock" and "Inventory turnover" to a BW report. I have activated InfoCube 0IC_C03.
Does anybody have experience to create a "Dead stock" report in BW(Dead stock is the part of your warehouse stock that has not been used for a certain period of time.)? Which info cube is used?
Regards,
WimHi,
I Hope, Slow moving materials (0IC_MC01) Multi provider will help you.
http://help.sap.com/saphelp_bw32/helpdata/en/40/cb051118bd3549a9e39958561fdf8e/frameset.htm
Re: How to display Fat/Medium/Slow moving materials in Query
With rgds,
Anil Kumar Sharma .P
Kindly Assign the points,If it give you some light
Message was edited by: Anil Kumar Sharma -
Hi,
My problem is to find out slow moving project stocks. Report MC46 shows only slow moving normal stocks and project stock is not included in this.
ThanksHi Gaurav Shah,
If you are procuring for project stock means, the material is for direct consumption.I think its not logical to see it in terms of "slow moving stock" category.
Hope I am right and it will be useful and give you some insights. -
Dead Stock Report Analysis in MC50
Hi expert
i am trying to work om Dead Stock Report. i had Run a Tcode MC50, in the report i have fine following
MAterial No----
10000
Current Stock----
6,215.327 KG
Average Stock----
6,215.327 KG
Dead Stock----
6,215.327 KG
Dead Stock Value----- 17,533,120.07 INR
Percentage----
1.95 %
*** Percentage.-------18.80 %
i want to verify all that above , data ic showing correct or not
i have check in material master, i am getting
Moving price -
254.93
Total stock -
1115.463
Total Value----
284364.78
in MMBE total Stock is showing is 6597
regard
nabilhi,
MB51 or mmbe
sans. -
Dead stock report - tables regarding
hi ,
i need the name of the table and the key field which used to take the dead stock report.
i.e. 6 months non moving materials list i want with stock values.
kindly forward your suggestions.
GiriHi ,
The tcode which you have provided is useful.....but i require the table and the field which required to generate the report....
My purpose is : basiscally i am generating the list off materials which is not consumed for more than six months..... )
do we have any table which stores data in the following format required by me ...
Materialno,plant,stock,last_consumed_date...
For your information -we can get this information from Goods received table and calculate it.... but this is a time consuming process.... that is why i am looking for a materialwise last consumption date.
looking forward to your suggestions further -
Good day to all.
We use the MC50 report to identify obsolete stock. We use a one plant system with various storage locations dispersed throughout the geographical area of our company. The problem we have is that the MC50 report as input parameters requires the plant and cannot be run per storage location, thus identifying obsolete stock per such location.
We are considering a customization but have been advised that the development will require extensive development as result of the main program having several includes which contain SAP standard function modules.
We are attempting to establish if there are other SAP users who encountered the same scenario and if so if there is not perhaps a simplified solution to extract the obsolete stock report per storage location as opposed to plant level.
Best Regards
Mike Olwagen
Manager SAP Solution Support
City Power Johannesburg (Pty) LtdHi,
In this regard to my understanding, we may use BI reports to extract the Dead Stock per storage location.
The Plant having the SLoc data can be pooled in the BI Interface, wherein selection criteria will be there to select respective SLoc having the Dead Stocks. The tables can be customized according to the requirement of the user in BI reports.
Regards,
Dhrubajit -
Dead stock or slow moving items reports
tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharmapls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma -
Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
RangHi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle -
Hello gurus,
I would like to creat a report on slow-moving items in LIS, similar to report RMCBLH30 (TAC MC46).
But in 'my' report I would like to see only those slow-moving items in stock. RMCBLH30 unfortunatelly gives my all slow-moving items, even those with quantity = 0.
Could someone please give me a hint on how to do this? Are there any good tutorials in building LIS-reports?
Thanks in advance
AliciaHi,
Please check the last date when any of your stock movement had an accounting impact like GR, GI etc and see whether the data tallies
In MC46 try for double line display tab. It shows last movement date.
Also, check for Detailed Display for each material. It will show the details based on which it is picking last movement date and No movement since days.
From this details you can make out the date which it is taking as last movement......
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock
If you want to generate a Z-report please take the help of technical consultant...
regards,
Patil -
Slow moving and non moving inventory
Hi Guru's,
I have to prepare a report of slow moving and dead stock report. so can anybody will help please....Hi,
Try with folowing t.codes,
MC50 - Dead Stock ,
MC46 - Slow-moving items
Regards,
Biju K -
what is the logic of dead stock report that is MC50,
what is the logic of slow moving stock report that is MC46,
and do we have any standard report for fast moving stock as well ?Hi Rahul
Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
Dead stock is the part of your warehouse stock that has not been used for a certain period of time
for further details pls refer
link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
T code :MC44 for fast moving stocks
Thnx and Regards
Vikrant -
Hi Expert
Please Help Me ......
I think dead stock is non-moving for time of period but I don't understand MC50
when I run MC50 in period of time 02/01/2008 - 09/04/2008.
I find stock movements for material :
Posting Date GR GI Stock level
26.12.2007 2 1 1
04.01.2008 2 1 2
07.01.2008 3 1 4
29.02.2008 0 2 2
03.04.2008 10 0 12
09.04.2008 0 0 12
I don't know why 's dead stock for time of period have transaction movement ????
Thank.Hi,
Dead stock is the minimum stock maintained for the period you analyse.
If you keep change the period range the Dead Stock value may also keep change, because the min. stock qty. for each period range might have changes.
If a material was not used for 1 year ( ex: qty. 100), if you run the dead stock report for any of the last 12 months , system will show the same value...
Hope it is clear.
Thanks,
Kumar Arcot -
Report on Dead stock and Slow moving stock
Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
DevaHi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB -
Slow moving items report for project stock
Hi ALL,
We are using project stock to manage all of our inventory. As the standard slow moving items report (MC46) does not contain project stock (special stock Q), we would like to develop a report then. "Slow moving" should be identified by material, plant, storage location and WBS.
Has any had this experience? What's the main data logic for this report?
Thanks a lot!!Dear,
Do One thing.. First goto MB5B - stocks on posting date and select to display only special stock indicator Q (Project). By this you can abstract all Project materials. Save the output into Excel. (The main aim is first abstract the project stock materials into a list with a suitable transactions - MB5B or MB52).
Then run MC50 or MC46 using these materials saved in excel file.
Try this.
Regards,
Syed Hussain. -
Dead stock and slow moving material
Hello,
I need to find out how to get dead stock and slow moving materail manually from tables.(instead of using MC46, & MC50).
Could you please tell me the logic and tables needed to retrieve this data.
regards
Gaurav Mainiuse table mseg and mver
logic is calculation of frequency of movements
regadsr
Maybe you are looking for
-
Hi!! Im using the cube 0PUR_C04 in a standard mode; I activated the infosources and update rules and when I saw the content of infocube some key figures dont have information, I revised the update rules and found this key figures that dont have actua
-
"Getting Started" page for Firefox 16.0.1 has a video window that plays audio only. Firefox test page for plugins shows RealPlayer, Flash, Flip4Mac and Java are up to date. What other video plugins are required. I'm currently using Firefox 10.0.2 and
-
Compressor - Dolby Digital 5.1 AC3 encoding problem
I'm completely stuck - I'm creating AC3 files in compressor using the "add surround sound feature" from 6 DISCREET mono AIFF files. I know they are discreet because I've listened to them in STP. When I create the AC3 files, however, they playback (on
-
Dear All, I am a SAP Functional Consultant (QM , PM & PP) and wants to grab some knowledge in the field of BI / BW as i am leaving my present job to move to Hyderabad to learn BW but i am little bit confused in BI & BW. Does it require programming al
-
PLZ GIMME A PROG WHICH EXPLAINS D LOCKING TECHNIQUE USED IN ABAP PLZ ALSO PROVIDE A DETAILED EXPLANATION.