Deallocate a credit note from an invoice in 2005

Client needs to be able to deallocate credit notes raised from invoices when posting a payment to help with later reconciliation.
Example: The client has 3 invoices for £100 and a credit raised from the most recent invoice for £50.
The client then pays 2 of the due invoices, less the value of the credit note (£150)
The try to allocate the cash but cannot allocate £150 to the 2 oldest invoices plus the credit note as the credit note is already allocated against the later invoice.
The client has allocated it in such a way in their system, and we should attempt to match it. Therefore, we cannot allocate the payment against one of the 2 earlier invoices and the balance of the last invoice.
Apparently this is very common so adding this as a On Account Payment is messy for lots and lots of accounts.
A much better solution for my client would be to disassociate the invoice and credit upon posting the payment.

Dear Carlos Mario Cuartas
You can think about below procedures for your question.
A. Create Credit Note (by Invoicing procedure)
   1) Selection Type
    When you try to progress rent invoices by using SAP RE Std.Transaction
    (T-Code: RERAIV - Create Invoices ), you can consider about below two selection type :
       a) Selection using FI documents
        --> That is for actual invoice based on the billing(posted) documents.
             & you can define the "Invoice Correspondence" (Include Detail)
       b) Selection using planned items of the cash flow
        --> That is for planned invoice as pro forma invoice (just first time)
             & you can define the another "Correspondence" for this format. (Not Detail)
   2) Summarize Invoices
        a) Per recipient (can involve several contracts)
      --> If the selected business partner has multiple contracts, then the items of all contracts
           are grouped into one invoice.
      b) Per contract
      --> If the selected business partner has multiple contracts, then the items of each contract
           are grouped into separate invoices.
B. Print-Out Format for the Credit Note
    You can define and design the "Correspondence of credit note" as below,
      - Go to RECACUST >> Correspondence > PDF-Based Forms (Mass Print and Single Print) >
                                         Forms > Define Forms
      - Go to RECACUST >> Correspondence > PDF-Based Forms (Mass Print and Single Print) >
                                         Correspondence Activities > Define Correspondence Activities
Regards,
Jeong, Yeong-Chul.

Similar Messages

  • Can anyone from SAP comment on this? Credit Note from AP Invoice

    Hi all!
    I'm creating a partial credit note from a Service AP invoice via DI.
    My invoice has 2 lines, the first for 10.000, the second from 5.000 (no VAT to keep things simple) Tot = 15.000.
    In the credit note I have the first line for 2.000 and the second for 1.000, Total = 3.000.
    I set for the first line
    CreditNote.Lines.BaseType = "18"
    CreditNote.Lines.BaseEntry = 28
    CreditNote.Lines.BaseLine = 0
    CreditNote.Lines.Line Total = 2.000
    and for the second
    CreditNote.Lines.BaseType = "18"
    CreditNote.Lines.BaseEntry = 28
    CreditNote.Lines.BaseLine = 1
    CreditNote.Lines.Line Total = 1.000
    and for the CreditNote
    CreditNote.DOcTotal = 3.000
    Saving, I obtain a CreditNote with the first line for 10.000, the second for 5.000 and a total discount of 12.000, Total = 3.000. (same invoice amounts on the lines
    and a discount to get the correct invoice total).
    My question is: isn't there a way to obtain a credit note linked to the invoice but with line amounts different from the ones of the invoice (in my example: first line 2.000, second 1.000) and without discount?
    in B1 you can do it!!!
    I know that from a fiscal point of view the result is the same, but seeing credit notes in B1 different from the vendor documents is pretty upsetting for some customers ...
    Thanks in advance,
    francesca

    Nevermind!
    I solved the problem: even with DI you can create a partial Credit Note.

  • Emitting credit notes to an invoice in the I modulate sd

    hello experts, 
    is there form that when emitting credit notes to an invoice in the I modulate sd, don't these overcome the value from the invoice to which you/they make reference?.
    Best regads
    Jorge Silva

    Hi,
    thanks for your answer!
    well, there is no link between the company B and the intermediate business partner..
    I thought of something like that:
    1. I create a sales order for the material : "licence" for 100000.-
    2. I create a rebate agreement (B003) of 10% for "initermediate business partner= M.Wagner"
    3.I create an invoice to company B of 100000.-
    4. Company B pays 100000.- but 10% is automatically "stocked" in the accounting of company A
    5 I create a credit note of 10000 (linked with the invoice) to pay M.Wagner.
    Is that possible? if not do you have other suggestion??
    thanks a lot!!!
    M.

  • List of outstanding Credit Note from Vendor

    Hi
    I want to know about following two reports
    1.List of outstanding Credit Note from Vendor.
    2. List of Outstanding POs more than half year
    Is any std reports available for those reports
    else
    How can i fetch the data where i have to find out?

    hi,
    1) RFITEMAP
    2) tcode ME2L
    A.

  • How is credit note to an invoice sap  real estate

    I need to make a credit note to an invoice of a leasein the form of real state of sap

    Dear Carlos Mario Cuartas
    You can think about below procedures for your question.
    A. Create Credit Note (by Invoicing procedure)
       1) Selection Type
        When you try to progress rent invoices by using SAP RE Std.Transaction
        (T-Code: RERAIV - Create Invoices ), you can consider about below two selection type :
           a) Selection using FI documents
            --> That is for actual invoice based on the billing(posted) documents.
                 & you can define the "Invoice Correspondence" (Include Detail)
           b) Selection using planned items of the cash flow
            --> That is for planned invoice as pro forma invoice (just first time)
                 & you can define the another "Correspondence" for this format. (Not Detail)
       2) Summarize Invoices
            a) Per recipient (can involve several contracts)
          --> If the selected business partner has multiple contracts, then the items of all contracts
               are grouped into one invoice.
          b) Per contract
          --> If the selected business partner has multiple contracts, then the items of each contract
               are grouped into separate invoices.
    B. Print-Out Format for the Credit Note
        You can define and design the "Correspondence of credit note" as below,
          - Go to RECACUST >> Correspondence > PDF-Based Forms (Mass Print and Single Print) >
                                             Forms > Define Forms
          - Go to RECACUST >> Correspondence > PDF-Based Forms (Mass Print and Single Print) >
                                             Correspondence Activities > Define Correspondence Activities
    Regards,
    Jeong, Yeong-Chul.

  • Invoice in F-43 & subsequent receipt of Credit note from the vendor

    Hi Guys
    I have received a vendor invoice and the same has been passed using F-43
    The Accounting impact will be
    Expenses A/c Debit  1000
        To Vendor A/c              1000
    90% of the above invoice has been paid
    Now few issues with our vendor and the balance to be paid for a particular vendor has been reduced by 10%. The vendor has issued a credit note and the same should be accounted
    Which transaction code i will use at this scenario - once this transaction is passed in FI, my open item of 10% should be zero automatically. i.e. once the second entry is passed the open item should be referred in that entry so that for the vendor no open item will exists
    I can very well go to FB65 and pass a entry for this, then go to F-44 and manually clear the same
    But we dont want to do the manual entry. So when the credit note is passed it will take the reference of the actually entry and give a impact on the same
    Thankyou
    Warm Regards
    Bala

    Hi
    Iam not very sure why you have mailed me the link - which is related to F110
    Hope iam not clear with my post
    In simple terms - i got a invoice from my vendor for a PO and later on iam getting a negative invoice (Credit Memo issue ) by the vendor to me
    Now after passing the transaction in MIRO for credit memo with PO reference - if i go to FBL1N for the vendor - the impact of the above two entries should get nullified and only the net balance should be displayed
    Warm Regards
    Bala

  • Auto Creation Of credit note from invoice

    Dear SD experts,
    It is desired to incorporate a scenario wherein a credit note be issued to the customer if his invoice has a particular condition type with x value in it. The credit note to be of x value only.
    The purpose is to give credit customer against his purchase and not give discount in the invoice.
    Any pointers on this please?
    Thanks and Regards,
    Tariq

    hi
    I think the functionality u r asking can be done by Rebate agreements
    For rebates search in the forum
    regards

  • Delinking a/r credit note from a/r Down Payment Invoice

    Dear All,
    Is there a way to delink credit note that has been created for a A/R Downpayment Invoice in SAP Business One 2005 SP2 PL50?
    thanks,
    Monil.

    Hi,
    No, this is not possible. The document flow is closed. You need to create a new Down Payment.
    It is possible to cancel the reconciliation, but this will not reopen The Down Payment or Credit Note and will only create inconsistency when upgrading the db to version 2007. The documents will be linked, but not the journal entries of the documents.
    Hope it helps,
    Jesper

  • Credit note from a credit memo with reference - Pricing

    Hi Gurus,
    I have created a Credit Memo (CR) with reference to an invoice (F2). The pricing procedure in the F2 is copied to CR, following the copy control defined. (what I expected).
    However, when creating the credit note (G2), the pricing procedure selected is the one defined for credit notes, and not the one in the credit memo. (I didn't expect this).
    I have this config. in the system:
    - XD03: Cust.Pricing Proced: "1"
    - VOV8: Docum.Pricing Proced: "P"
    - OVKK: for the combination of Sales ORgDCH"P"+"1" --> pricing procedure is ZPROAC  (this is pricing procedure for G2.
    The pricing procedure in the Credit Memo (CR) is ZNETO1.
    Copy control config is the following:
    - VTFA:  G2 - CR.
    Copy requirements at header level: 001
    At item cat. (G2N): copy requirement: 002 Item/order-related; Data VBRK/VBRP: 002 Ord-rel.credit memo
    Pricing type: G
    Could you provide any comments here?
    Thanks
    Julian

    Dear Julian,
    First of all Copy control does not controls the copying of pricing procedure from one doc to another.
    Pricing procedure will be same as per your pricing procedure determination.
    It controls the copying of values for particular condition types from one doc to another.
    I have created a Credit Memo (CR) with reference to an invoice (F2). The pricing procedure in the F2 is copied to CR, following the copy control defined. (what I expected).
    In this case I think Pricing procedure defined for both doc types F2 and CR is same, thats why all the pricing is copied as it is to CR.
    if they are not same but all the condition types which are there in pricing poc. of F2 are also in pricing proc. of CR then pricing values will be copied without any change. (Still sequence of condition types in pricing proc. can make diff.)
    pricing procedure is ZPROAC (this is pricing procedure for G2.
    The pricing procedure in the Credit Memo (CR) is ZNETO1
    Since the pricing procedure is different for both doc types, There could be some condition type which are there in ZNETO1 but not in ZPROAC.
    Which ever condition types are common will be copied.
    I will suggest you to keep pricing procedure same for both the doc types CR and G2.
    Or atleast all condition types of ZNETO1 should be there in ZPROAC in appropriate sequence. (ZPROAC can have addition condition types as per your requirement.)
    Regards
    Mayank

  • DFF Values Default in Credit Memo from AR Invoice

    Hi,
    We have entered an AR Invoice with DFF values at the Line Level.
    We are creating a Credit Memo directly from the Invoice.Almost all the information in the Credit Memo defaults from the Invoice which is being credited. The DFF information is not defaulted from the Invoice Line level.
    We have to manually enter them.
    Is there someway to default the DFF values from the Invoice onto the Credit Memo ?
    We are on R12.1.3
    Regards,
    Hari Charan

    Hi Hari Charan,
    in 11i this seems to be not possible, as there is an enhancement request available for the same. However for R12 there is a patch suggested by oracle in the below documentation ...Please review the note in detail
    Transactions Form Issue: Credit Memo Does Not Inherit Descriptive Flexfields of Invoice [ID 1316534.1]
    Regards,
    Ivruksha

  • Auto-clear  only credit note with  customer invoice (not receipts)

    Hi all,
    I have a query in regards to auto clearing. Program SAPF124.
    Is it possible to run the program that will clear only credit notes against invoices, and not receipts!
    Thanks a million.
    Regards
    Tonia

    If you have different document type and different number ranges for credit notes and payments, restrict the selection by document number ranges  e.g from 1900001 to 1999999.
    Regards,

  • F110 - Exclude Credit Memos from original Invoice

    Good afternoon,
    Our go live was 1 month ago.
    We have prepared automatic payment process and everything works perfectly. Mainly, we base our process in the Payment Method Supplement field. Some payment methods group documents following different rules (restricted to 7 rows or as many as request).
    Our problem is that our customer does not want credit memos to be included never there (payment terms are taken from original invoice and when they pay the invoice, this credit is included). They want to identify ALWAYS what they are paying fulfilling the Payment Method Supplement field.
    Is there any chance not include the credit memo in these payments? For example, not copying Payment Method Supplement from the original invoice? any other idea? Please let me know. Regards,
    Javier

    Hi Renfe Proyecto Auge ,
    You can exclude Credit memos in Additional Fields there you have to select Excluded and from hidden field select document radio button and from the list select Document Type (BKPF-BLART),
    after this you have to choose Document type credit memo what ever you maintained for Credit memo, accordingly system will exclude the values from Automatic Payment Run.
    Regards
    Sridhar

  • Creating Credit Note based on Invoice

    HI there,
    I am trying to create a Credit Note through the DIAPI using VB. This Credit Note must be linked to the Invoice 88 for example :
      Try *
                'Get the required business object *
                ''Dim oCreditDoc As SAPbobsCOM.Documents = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oCreditNotes)*
                Dim queryString As String*
                Dim oRecSet As SAPbobsCOM.Recordset*
                oRecSet = oCompany.GetBusinessObject(300)*
                queryString = "SELECT T0.CardCode from OINV T0 where T0.DocNum = 88 "*
                oRecSet.DoQuery(queryString)*
               Dim oCreditDoc As SAPbobsCOM.Documents = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oCreditNotes)*
                'Set the business partner code*
                oCreditDoc.CardCode = oRecSet.Fields.Item(0).Value*
                'set the documents due date -mandatory*
                oCreditDoc.DocDueDate = Now*
                'add first line on invoice*
                'use the SO order specified in the text box *
                'as a base document*
                oCreditDoc.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oInvoices*
                oCreditDoc.Lines.BaseEntry = CInt("88")*
                oCreditDoc.Lines.BaseLine = 0*
                'add the new invoice document*
                lRetCode = oCreditDoc.Add*
                'check return code*
                If lRetCode <> 0 Then*
                    oCompany.GetLastError(lErrCode, sErrMsg)*
                    MsgBox("Error : " & lErrCode & " : " & sErrMsg)*
                Else*
                    'store newly created object code in a new string*
                    '(could have stored it in OrdCodeStr)*
                    Dim OrdCodeStr2 As String*
                    OrdCodeStr2 = ""*
                    oCompany.GetNewObjectCode(OrdCodeStr2)*
                    MsgBox(" Created Credit Note : " & OrdCodeStr2)*
               End If*
            Catch ex As Exception*
                MsgBox("Exception. Connect: " & ex.Message)*
            End Try*
    I am getting an "Item code missing" error. Does this mean i must set up each and every line to credit? What if there are millions of lines? Can we not just set a BaseEntry and BaseType for the document as a whole so it knows which Invoice needs to be credited completely?
    Kind regards,
    Greeshma
    p.s. i tried to get this to display as code but seems this editor is either confusing me or it doesnt work! sorry. when i find the right person to complain about it to i will!
    Edited by: Greeshma Gulab on Nov 18, 2009 11:13 AM
    Edited by: Greeshma Gulab on Nov 18, 2009 11:15 AM

    Hi,
    I am not able to make out ur code because of the formating problem, but anyways check the below thread, it might be helpful to u..
    Create Credit Memo based on A/R Invoice
    Vasu Natari.

  • Single Credit Note for Multiple Invoices

    Hi,
    For multiple invoice of a specific customer only one credit note to be issued.
    Pls guide.
    Regards
    Vijay.

    Create credit memo request with reference to first invoice (the pop-up screen will take only one).
    Once all the items are copied to the credit memo request use menu path Sales document -> create with Reference , enter the second reference invoice. This will copy all the line items in the second invoice.
    Repeat the second step to copy all the invoices of the customer to the credit memo request.
    Do invoicing to generate a single credit memo. The credit memo request may split at the time of invoicing (some times) but you can prevent it.

  • Create a Credit Memo from purchase invoice

    Hi everyone,
    I am trying to create a credit memo from a purchase invoice, but it retuns the following error:
    "RFC is missing"
    I am using the JCO classes to develop this application. this is a sample of my code:
    IDocuments document = SBOCOMUtil.newDocuments(company,new Integer(19));
    document.setCardCode("P00055");
    document.setDocDate(new java.util.Date());
    document.getLines().setBaseEntry(new Integer(2852));
    document.getLines().setBaseLine(new Integer(0));
    document.getLines().setBaseType(new Integer(18));
    int lRetCode = document.add();
    if(lRetCode != 0){
        System.out.println(company.getLastError().getErrorMessage() );
    Do you have any idea about what is the problem?
    Many Thanks.

    Hi everyone,
    the problem was solve. I had to specified the FederalTaxID field on the document.
    just added the following field:
    document.setFederalTaxID("000000000000");
    Thanks.

Maybe you are looking for

  • Premiere Pro CC 2014 playback freezing and crashing with new iMac i7

    Using Premiere Pro CC 2014 and having constant playback freezing and software crashes on a brand new iMac i7. Here are the specs: iMac i7 4.0GHz 5k Retina 32 GB Ram AMD Radeon R9 M295X 4GB graphics card 512GB Solid State Drive I was on chat yesterday

  • If I buy the photography plan can I have illustrator rather than lightroom?

    I'm a fashion design student and need photoshop on my own computer, however I have no need for lightroom so wondered if I could have illustrator instead? I wouldn't use the other CC apps if I bought the £15 a month full package so wouldn't want to sp

  • How do I put the correct e-mail as my username for icloud on my iPhone?

    My phone keeps asking me to sign into icloud, but when I try it has the wrong e-mail as my username. I tried to delete the account,but it askes me to give my password inorder to delete it and I no longer know the password as it is from an old apple i

  • Profit Center Comparison: Return on Investment

    Hi, I am looking to generate return on investment report in PCA through S_ALR_87013339. It is looking for P&L and B/S account groups. Can someone tell where to create these groups, and what accounts are generally grouped together for this report? Tha

  • Problems with shape distortion after warp effects

    Hello everybody, Just a quick and rather basic question I'm afraid. I made a circle, then an ellipse, I warped the ellipse in various different ways to achieve the exact shape I want. Then I merged them using the Pathfinder tool. So far so good. Howe