Debug ABAP Multi Mapping in a BPM

Hi Guys,
My scenario is as follows.
1) Send IDOCS from SAP.
2) Loop start
3) Collect in BPM based on some correlation
4) append to a multi line container
5) Loop ends at certain condition
6) Transform using interface mapping which is in this case ABAP mapping.
7) Send the merged message
I am facing a mapping error, but could not figure out what it is, it says
"Parsing error after mapping: unexpected symbol: '<' (line 0, column 53)"
My question is how to debug ABAP Mapping when it is BPM.
Things already done and did not work
1) HTTP break point does not work as BPM is run by WF-BATCH user and it is not a dialog user, so debug window does not appear when the mapping is running
2) I cannnot use SXI_MAPPING_TEST transaction as any of BPM cannot be selected on the first screen, without which it does not allow you to debug.
Please help me how to go into a debugger when my Multi ABAP mapping is executed in the system.
Thanks in advance,
Regards
Sujan

Hi Sujan,
Try debugging with this approach if possible.
1. Unregister your queue from TC SMQR
2. Execute your scenario
3. Check the Queue and Debug your LUW by pressing Debug LUW.
4. Set the breakpoint at your mapping program and test.
5. After completion Register your queue again.
Pls see the document more more details.
https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000582377&
How -To debug XI Applications
Hope it helps,
Regards,
Satish

Similar Messages

Abap multi-mapping doesn't work

Hi,
We have a 7.1 PI system and we are trying to set up a multi-mapping. This should process one IDOC into multiple XML-files.
If we do this with a message mapping everything works fine. If we do this with an abap mapping it doesn't work. We receive the following error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">MISSING_INTERFACE</SAP:Code>
<SAP:P1>2</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No interface specified for parameter 2</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I can make it work by changing a value in debugging. In class CL_MERGE_SPLIT_SERVICE, method ENTER_SPLIT_SERVICE, there is a read on table split_data:
 set interface
 READ TABLE split_data
 WITH KEY
 param_type = c_param_type_inbound
 param_numb = <payload_line>-numb
 ASSIGNING
 <split_line>.
Now if I change the <payload_line>-numb to 1 each time the table is read, everything works fine.
What am I doing wrong here? Or is this a bug?
Thanks,
Wim
Edited by: Wim Van Linden on May 19, 2009 12:32 PM

Hi,
What ws you mistake ? caus I have the same error, here is my XML generated :
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages
 xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
 <ns0:Message1>
 <SOAP:Envelope
 xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header>
 <OPER_REF>SAPPI</OPER_REF>
 </SOAP:Header>
 <SOAP:Body>
 <ns2:createSapProductRequest
 xmlns:ns2="http://xxxxxx.com/PI/ZIN243/SendMaterialList">
 <country>FR</country>
 <division>1300</division>
 <productStage>
 </productStage>
 <productCode>000000000001207062</productCode>
 <typeCode>VERP</typeCode>
 <productLab>PALETTE INTERCO</productLab>
 <productHierarchy>
 </productHierarchy>
 <productCreateDt>2009-06-19</productCreateDt>
 </ns2:createSapProductRequest>
 </SOAP:Body>
 </SOAP:Envelope>
 </ns0:Message1>
 <ns0:Message2>
 <SOAP:Envelope
 xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
 <SOAP:Header>
 <OPER_REF>SAPPI</OPER_REF>
 </SOAP:Header>
 <SOAP:Body>
 <ns2:createSapProductRequest
 xmlns:ns2="http://xxxxxxx.com/PI/ZIN243/SendMaterialList">
 <country>FR</country>
 <division>1500</division>
 <productStage>
 </productStage>
 <productCode>000000000001207062</productCode>
 <typeCode>VERP</typeCode>
 <productLab>PALETTE INTERCO</productLab>
 <productHierarchy>
 </productHierarchy>
 <productCreateDt>2009-06-19</productCreateDt>
 </ns2:createSapProductRequest>
 </SOAP:Body>
 </SOAP:Envelope>
 </ns0:Message2>
</ns0:Messages>

Multi mapping with out BPM

HI ALL ,
I am trying to do multi mapping with out using BPM .I will get message from the sender and i need to send that to two different target system. I have defined the mapping in the IR . In ID i have created the configuration scenario and i have created the receiver determination .In receiver determination i have selected "EXTENDED" and when i select input help for mapping name it says "NO Object found". What else should i do get the mapping program here .
Regards,
Tarun.

Bhavesh,
I'm sorry but if he needs 2 different receivers, then it's not the case of using Enhanced Interface Determination.
sapuser,
if you scenario is asynchronous, then it's easily implemented.
But it won't be achieved with multimapping.
You'll have 2 receivers in receiver determination (normal RD, not enhanced). For each of those, you'll have to create a separate simple mapping (that will generate the message expected at each receiver system) and refer that mapping in the interface determination of each receiver.
For example, you have input_message containing data1 and data 2. You'll have 2 simple mappings (not a multimapping), 1 generating output_message_1 containing data1 and the other generating output_message_2 containing data2. Then refer those mappings in the proper interface determinations.
Regards,
Henrique.

Multi Mapping with out BPM and Receiver Determination Condition

Hi Masters,
My Requirement Was:
Proxy will send the data to XI system, Based Customer group number[1000,2000,3000,4000], I need to split the message into 4 messages, and sent to 4 Different location, based on Customer Group condition.
For message split, I fallowed below weblog.
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Problem is file split correctly, but data goes to all customer groups..
EX
If they send the customer group 1000, I need to send the customer group 1000 file to BS1[Business Server1],
If they send the customer group 2000, I need to send the customer group 2000 file to BS2[Business Server1],
Please guide me,
Thanks,
ANU-

Hi,
Develope it like follow.
Source Structure- Same for everything.
Create 4 different structures for all targets, create 4 different msg types, 4 inbound message interface ( i think you are creating single Message type now, that is the mistake)
In message maaping, add 4 target message types in same MM.. i hope i am clear.. ( same like in blog /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible he has created 2 message types USER_1 and Employee)
keep occurence of all of them 0 to unbunded (not necessary)
Now create mapping for each message type (same like USER_1 and Employee, imagine them like different message types virtually).
Map message type with the source field and mention the condition which you want test using graphical functions. i will say if x e equla to 1 creatif --> target.
I hope i m clear till now...
thanks.

Multi-map without using BPM

Hello
I am trying to create a multimap without using BPM as we are on SP15. I did the respective configuration in Message and Interface mapping as mentioned in the weblog.
I am expecting multiple files to get generated in the target directory and i hope file adapter supports this.
For that I did extended interface determination where I selected the respective interface mapping.
When I am trying to execute this interface it throws error in SXMB_MONI saying "No messages created from split mapping".
One more doubt, with what names it will generate multiple files?
Thanks in advance.
Regards
Rajeev

Hello
I tested my mappings in the Test tab of Interface Mapping where it runs absolutely fine.
Here is source and target messages
***************************Source**********************************
 <?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
- <ns0:Message1>
- <ns1:UpdateShipTest_MT xmlns:ns1="http://sjm.com/DynConf">
- <DELIVERY>
<DELIVERY_NUMBER>12</DELIVERY_NUMBER>
<TRACKING_NUMBER>3</TRACKING_NUMBER>
<SHIP_DATE>3</SHIP_DATE>
<USER_ID>33</USER_ID>
<SHIP_VIA>3</SHIP_VIA>
<ITMNO>3</ITMNO>
<MATNR>3</MATNR>
<QUANTITY>3</QUANTITY>
</DELIVERY>
- <DELIVERY>
<DELIVERY_NUMBER>121</DELIVERY_NUMBER>
<TRACKING_NUMBER>3</TRACKING_NUMBER>
<SHIP_DATE>3</SHIP_DATE>
<USER_ID>33</USER_ID>
<SHIP_VIA>3</SHIP_VIA>
<ITMNO>3</ITMNO>
<MATNR>3</MATNR>
<QUANTITY>3</QUANTITY>
</DELIVERY>
</ns1:UpdateShipTest_MT>
</ns0:Message1>
</ns0:Messages>
*************************End Source*****************************
This is the one message which is required to be split into two separate Delivery files
***************************************Target Message*******************************
 <?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
- <ns0:Message1>
- <ns1:UpdateShipTest_MT xmlns:ns1="http://sjm.com/DynConf">
- <DELIVERY>
<DELIVERY_NUMBER>4</DELIVERY_NUMBER>
<TRACKING_NUMBER>5</TRACKING_NUMBER>
<SHIP_DATE>5</SHIP_DATE>
<USER_ID>5</USER_ID>
<SHIP_VIA>5</SHIP_VIA>
<ITMNO>5</ITMNO>
<MATNR>5</MATNR>
<QUANTITY>5</QUANTITY>
</DELIVERY>
</ns1:UpdateShipTest_MT>
- <ns1:UpdateShipTest_MT xmlns:ns1="http://sjm.com/DynConf">
- <DELIVERY>
<DELIVERY_NUMBER>46</DELIVERY_NUMBER>
<TRACKING_NUMBER>5</TRACKING_NUMBER>
<SHIP_DATE>5</SHIP_DATE>
<USER_ID>5</USER_ID>
<SHIP_VIA>5</SHIP_VIA>
<ITMNO>5</ITMNO>
<MATNR>5</MATNR>
<QUANTITY>5</QUANTITY>
</DELIVERY>
</ns1:UpdateShipTest_MT>
</ns0:Message1>
</ns0:Messages>
*************************************End Target****************************************
According to interface map I guess the adapter should split the messages but at runtime it gives error.
Thanks and Regards
Rajeev

Split message - Multi mapping w/o BPM

Did you check this thread same thing discusing here
Quality of service in Receiver file/ftp adapter (SAP PI 7.1)?
Rajesh

Hi Sarvesh.
I executed a refresh full, but the problem persists. I really think something is wrong in my scenario.
At Design I created 1 Message Mapping (MM_File) with 1 source Message Type (MT_FROM) split to target 3 Message Types (MT_TO1, MT_TO2, MT_TO3).
I created 1 Interface Mapping (IM_My_Main_File) with 1 source interface (MI_File_Out), 1 Message Mapping (MM_File) and 3 target interfaces (MI_File1_IN, MI_File2_IN, MI_File3_IN).
At Configuration I created these objects:
Interface Determination:
Sender Service: BS_FROM
Sender Interface: MI_File_Out
Receiver Service: BS_TO
Type of Interface Determination -> Enhanced
Quality of Service: Maintain Order At Runtime is marked
Interfaca Mapping: IM_My_Main_File
Inbound Interfaces:
MI_File1_IN
MI_File2_IN
MI_File3_IN
Receiver Determination:
Sender Service: BS_FROM
Sender Interface: MI_File_Out
Receiver Service: *
Type of Receiver Determination -> Standard
Configured Receivers -> Service BS_TO
Configurarion Overview for Receiver Determination
BS_TO
MI_File1_IN IM_My_Main_File CC_File1_IN
MI_File2_IN IM_My_Main_File CC_File2_IN
MI_File3_IN IM_My_Main_File CC_File3_IN
Thanks!

Multi mapping before BPM and then message routing to different IDocs

I am working on PI 7.0.
I have a scenario where a message from a third party needs to be split and then mapped to multiple IDocs in the target. This decision happens based on an RFC call to SAP ECC. Before the message passes to BPM, I have done a multi mapping to make the RFC call and split the message into multiple messages. Subsequently I have taken a multi line container inside the BPM to receive these messages and process them Parforeach and then a switch is applied to handle the rest of the scenario.
Problem is when I am trying to execute the scenario, it fails in first step(multi mapping) before the BPM, it is not able to create the node for the multiple message.
To explain a bit more, Message type say M1 is linked to Message interface MI1_OB. Then I have created an abstract message interface MI1_ABS and made it as 0---unbounded. Similarly in the message mapping I have changed the occurrence of the target message type (same as source message type)

Hi Ambrish Mishra,
Please check "Performing Several Multi-Mappings in a Series" [Link|http://help.sap.com/saphelp_nwpi711/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/frameset.htm] . According it, second mapping should be able to accept this structure as input
<?xml version="1.0" encoding="UTF-8"?>
<sm:Messages xmlns:sm="http://sap.com/xi/XI/SplitAndMerge">
<Message1>
</Message1>
<MessageN>
</MessageN>
</sm:Messages>
Regards,
Raghu_Vamsee

BPM multi-mapping

Hi guys,
I'm doing a multi-mapping in a BPM (I need the BPM for other validations). This multi-mapping is 1x2 and the messages are created based on payload fields(both are optional 0..1). the mapping is working fine, the problem is at the fork step, I've two send steps and whenever the message1 or 2 doesn't have occurences, I got an error that stops my BPM. But this is not an error as the messages are optional and don't need to occurs everytime.
Anyone know how to solve this?
Thanks in advance & regards,
Ricardo.

Hi Patreek,
Necessary branches = 1.
I already did it. It works if only one message is generated (message1 or message2). If both messages are generated I get no error at the BPM, but only one message arrives ERP and when I check at BPE moni one of the send steps is logical finished.
Any idea? maybe I'm missing something...
Regards,
Ricardo.

Multi mapping issue

Hi ,
I am using a multi mapping(with out bpm) in my scenario. One source structure is mapped to 3 different targets and these 3 different targets are using 3 different adapters.
There will be a indicator from the source structure which descriminates all the 3 targets.
How can I restrict the XI to send only to one target based on indicator in the source structure?
EX: If the indicator in the source structure is 1000 then I want to send this message to only one target specified in the mapping.
So my problem arises where in, because we are using multimapping 1:n, if I trigger a message in the proxy it will be sending to all the 3 targets. I don't want this.
Appreciate your help on this.
Thanks
bpr

HI
You need to have 3 different channels for 3 receivers with receiver agreement for all three.
Go to Receiver determination and under configured receivers you can specify condition you want.
If the indicator in the source structure is 1000 then I want to send this message to only one target specified in the mapping.
select the left operand as indicator field from source type
= as Op
right side is 1000
Against this configure the receiver you want to send data.
Thanks
Gaurav

Error in Multi-mapping without BPM

Hi frnds,
I am doing a scenario File-XI-File. I am using the multi-splitting thing in the Message mapping. I have taken care of all the occurance's and "enhanced" thing in the IR and ID resp. I m using SP16. I want to avoid BPM.
But therez sme error cming up. When I check the MONI, its shwing "No messages created from split mapping" and when I test my interface using the Test Configuration in the ID, its shwing error in the Receiver Determination -- "HTTP connection to ABAP Runtime failed. Error: 403 Forbidden"
I have checked most of the blogs and forum suggestions. I have checked the ICF activations as well ...
So, do come back to me with your valuable suggestions, and I will award them points, if they really help me out.
Thanks and regards.
Neetesh

Hi Neetesh,

When I check the MONI, its shwing "No messages created from split mapping"
For this, Can you check the source XML. Does it contain Tags like <messages> .. If yes, you need to remove them from your source XML.
If i am right, you have copied the XML from the TEST tab of the message mapping and pasted it in a notepad and saved it without making any changes at all..... Just do as i have mentioned above and i am sure you will no more get that error message in your MONI....
Also go through this weblog which talks about multi-mapping without BPM,
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Regards,
Abhy

BPM Multi Mapping to diffrend receivers

Hello All,
i have to deploy an bpm process with 1:N mapping and different receivers
i have an receive step an transformation step for the mapping and
two send steps each in an block to send single messages to the receivers.
my problem is:
say the input Message has 4 Subtrees so after the Mapping i have 4 Messages for receiver1 and 4 Messages for receiver2
BMP send all 4 Messages to receiver1 and then all 4 messages to receiver2
but i want to send message1 tor receiver1 , then message 1 to receiver2
so that the pattern is like this:
MSG1Rec1, MSG1Rec2
MSG2Rec1, MSG2Rec2
MSG3Rec1, MSG3Rec2
is this possible with bpm.
Multi Mapping without bpm is not possible
regards ralf

Hi Marshal
receiver is abap proxy and not adapter engine
operation mapping is like this
source_operation1   => target_Operation1   0..unboundet
                                 => target_Operation2   0..unboundet
in message mapping
source_Message1    => target_Message1 0.. unbound
                                  => target_Message2 0..unbound
all work fine but in bpm i need two blocks pareach to send the messages to target.
and bpm will work first block1 and then block 2
i need a block for both sender steps but ???

Duplicate Message ID issue in case of Multi mapping (without BPM)

Hi Experts,
I am doing one sample Example for my requirement of converting the single source message data into the multiple Target messages.
for example, when sender system is sending the 5 sale order details into a single message in PI then my Inbound proxy class of ECC R/3 receiver system must get this sale orders separately, that means inbound proxy class method must be triggered separately for 5 sale orders from sender system. for achieving this, I have used the Multi mapping concept in ESR (without BPM).
This scenario is in Asynchronous mode.
The below screen shots give the details on what I have configures so far.
IN ESR
IN ID
IN SXMB_MONI of PI
IN SXMB_MONI of ECC R/3 Receiver system (Error in Processing)
due to this error, inbound Proxy class method is not being triggered for the single Sale order details as well,
please let me know how to tackle this duplicate message ID issue when we have multiple payloads to process in a single message.
please also let me know if is there any other workaround to fulfil this requirement.
Thank you,
Regards,
Jagesh

Hi Nunu,
Check the below blog for restrictions.
Multi-Mapping without BPM - Yes, it’s possible!
Restrictions
Messages that result from the split in a mapping-based message split are sent using one AE. So only adapters running on the AE are supported. In particular, this means that target IDOC message splits are not supported since the IDOC adapter is not part of the AE.
Regards,
Praveen.

Multi-Mapping without BPM

Hi ,
I am following this weblog
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
but stuck up with what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth

ID will have only ID under it. instead of creating flat structure like the one above Jin has changed the strucutre below . you will have only ID field in it or you want u can add other fields in it .
Regards
Sreeram.G.Reddy

Multi-Mapping and Message Split using BPM

Hi All,
Could anyone pls let me know clearly how message mapping can be done for this weblog
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
Thanks,
Ram

Hi,
When you are doing Message mapping after adding the Messaget types for source and target messages. You can click on the "" button in the target message and add one more tab. You can go to Message tab as shown in the 5th image and click "" button to add one more message type. Then do the mapping as usual.
Based on the value of the element(name), the node of input(details)should be directed to one of the two message types
Here in this blog it is done based on the Name.
You need to use IFTHENELSE boolean function and do the mapping.
Thanks,
Prakash

Error: 1:n multi-mapping using BPM for file to file scenario

Hi. Iu2019m trying to do 1:n multi-mapping using bpm scenario. I use file to file. Input file consists of many records and then I want many record to be transformed into many file at target system. I follow step in http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/. However, I have a problem when file is retrieved in to XI. It doesnu2019t create any output file.
When I look at SXMB_MONI, it shows u201CNo object type found for the message Check that the corresponding process is activated.u201D Besides, it shows error message "Unable to perform action for selected message" when i clikc at PE in SXMB_MONI.
I have check at many previous posts with the same error message but still couldnu2019t solve it. I already activate my BPM and check that status in SXI_CACHE = 0. There is noting left in change list of my IR and ID.
Here is my design and configuration.
IR
Data Type: DT_file_split -> for both input and output file
Message Type: MT_file_split_sender, MT_file_split_receiver
Message Interface: SI_file_split_in, SI_file_split_out, SI_file_abs_source, SI_file_abs_target
Message mapping: MM_file_split for mapping MT_file_split_sender with MT_file_split_receiver
Interface mapping: OM_file_split
u2022 Source = SI_file_split_out
u2022 Target = SI_file_split_in
u2022 Mapping Program = MM_file_split
BPM following this link http://www.riyaz.net/blog/xipi-1n-multi-mapping-using-bpm/.
ID
Import my Integration process
2 Communication Channel for getting input file (CC_File_split_sender) and creating output file (CC_File_split)
2 Receiver determination:
u2022 Source system to BPM using interface SI_File_Abs_source
u2022 BPM to target system using interface SI_File_Abs_target
1 Interface determination:
u2022 from source system to BPM
u2022 Sender interface: SI_File_Split_Out
u2022 Receiver interface: SI_file_abs_source
1 Sender Agreement
u2022 Commu. Component: Source System
u2022 Using interface: SI_File_Abs_source
u2022 Sender Communication Channel: CC_File_Split_Sender
1 Receiver Agreement
u2022 Sender Communication Component: BPM
u2022 Receiver Communication Component: Target System
u2022 Receiver Interface: SI_File_Split_In
u2022 Receiver Communication Channel: CC_File_Split
Anyone know how to fix this?
Thanks,
Pavin

Hi,
Yes, thats the problem.
You are creating file from test tab of 1..N mapping .
In case of 1..N mappping in mapping Extra tags of messages are addded to the data.As shown here:-
Messages
 Message1
 MessageType
When you use this mapping to generate xml message then it will add additional tags for <Messages> and <Message1>, which is not correct. it should only have structure of you MT.
So remove start and end tag of <Messages> and <Message1> from your data file. Mentioned below in bold.
<xml......>
<Messages>
<Message1>
<MT_...>
</MT_...>
</Message1>
</Messages>
This should solve your problem.
Regards,
Sami.

Debug ABAP Multi Mapping in a BPM

Similar Messages

Maybe you are looking for