Debugging a project!

Hello !
I have installed Sun IDM 7.0.1 and I am suing Net beans 5.5 IDE as a development tool. I was trying to debug a project and I get the following error :
" com.waveset.util.WavesetException: Server exception: java.lang.NullPointerException"
I have made sure the server is up. It gives me a message saying that it was trying to deploy where in it asks me to provide credentials so that I can log in.
Thanks in Advance.

Yes I did do the "Set Identity Manager Instance" and I was using for the CBE target :sandbox changed to dev and switched back to sandbox. At that point when it launched the console i cud log in and everything was working fine. But later WHen i was trying to debug the project ( I am using full and not the remote) it didnt let me log in. And Identity manager instance wasin Embedded when i was changing CBE target and so I left it at athe same embedded level.

Similar Messages

  • I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

    I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

    Hi Memalyn
    Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
    My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
    If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
    Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
    Let us know what you find out, and if you manage to get your space back.
    Matt

  • Debug multiple projects in Jdeveloper 11.1.2.4

    Hi all,
    I have 2 projects (tcp/ip server and client) in one workspace. How can i set up the jdeveloper so that I can debug both projects simultaneously. For example in Microsoft Visual Studio I have an option Debug->Start neu instance for each project independently.
    Thanks a lot,
    Alexander

    Caused by: java.lang.UnsupportedClassVersionError: model/view/DepartmentsVOImpl : Unsupported major.minor version 51.0
    Is the Java version in JDeveloper JDK 7 and the version on the server an earlier version such as JDK 6? The model/view/DepartmentsVOImpl class is compiled with JDK 7 but is being run with JDK 6 on the server.

  • Debugging question (project with Ant)

    Hi,
    Could anyone tell me how to debug a project with Ant?
    There is no main class to execute.
    Only Ant script runs it as below.
    Thanks in advance,
    <?xml version="1.0" encoding="UTF-8"?>
    <project basedir="." default="all" name="run1">
    <target name="all">
    <java classname="zeus.agents.ANServer" failonerror="true" fork="true">
    <arg line="Nameserver2 -t 0.1 -f dns.db"/>
    </java>
    </target>
    </project>

    how simple was that... Thanks Mark.
    Now I have another problem - how can I specify deployment targets when creating a new dataspace? I'm using a DspCommonCommands.py script, which targets deployments to any server and cluster in the specified domain:
    targets = wlst.get('Targets')
    wlst.invoke('createDataSpace',[dataspaceName,targets],['java.lang.String','java.util.Set'])
    which results in 2 problems:
    1. targeting projects to inappropriate servers (like AdminServer)
    2. targeting project to cluster and all servers belonging to that cluster (which results in errors when trying to start corresponding request_handlers application)
    I thought I can simply list the names of clusters I would like the project to be targeted to, but it results in:
    javax.management.RuntimeOperationsException: RuntimeException occured trying to invoke operation createDataSpace
    Caused by: java.lang.IllegalArgumentException: argument type mismatch
    I can't find the class with createDataSpace() method to check what it's all about and how should I format the target names.
    Regards,
    Tomek

  • JBO-26061: Error while opening JDBC connection how to debug in project

    Hi,
    Am using adf 11.1.1.5 jdev
    Can any one guide me . how can i debug and find out exactly where jdbc error is occurring .How to track down the error as am new to project .
    <LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
    javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
    oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at oracle.adfinternal.view.faces.config.rich.RecordRequestAttributesDuringDispatch.dispatch(RecordRequestAttributesDuringDispatch.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidad.context.ExternalContextDecorator.dispatch(ExternalContextDecorator.java:44)
         at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$OverrideDispatch.dispatch(FacesContextFactoryImpl.java:267)
         at com.sun.faces.application.ViewHandlerImpl.executePageToBuildView(ViewHandlerImpl.java:469)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:140)
         at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:189)
         at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:193)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:800)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:294)
         at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:214)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
         at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
         at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: javax.servlet.ServletException: OracleJSP error:
    oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
         at oracle.jsp.runtimev2.JspReportUtil.reportException(JspReportUtil.java:181)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:737)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:153)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag$1.call(RegionTag.java:128)
         at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:503)
         at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:50)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspIterationTagNode.executeHandler(OracleJspIterationTagNode.java:45)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspNode.execute(OracleJspNode.java:89)
         at oracle.jsp.runtimev2.ShortCutServlet._jspService(ShortCutServlet.java:89)
         at oracle.jsp.runtime.OracleJspBase.service(OracleJspBase.java:29)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:422)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:802)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:726)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
         at java.security.AccessController.doPrivileged(Native Method)
         at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
         at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
         at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
         at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
         at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
         at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:163)
         at weblogic.servlet.jsp.PageContextImpl.include(PageContextImpl.java:184)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.__include(IncludeTag.java:442)
         at oracle.adfinternal.view.faces.taglib.region.IncludeTag.doEndTag(IncludeTag.java:232)
         at oracle.adfinternal.view.faces.taglib.region.PageTemplateTag.doEndTag(PageTemplateTag.java:162)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:62)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspClassicTagNode.evalBody(OracleJspClassicTagNode.java:87)
         at oracle.jsp.runtime.tree.OracleJspBodyTagNode.executeHandler(OracleJspBodyTagNode.java:58)
         at oracle.jsp.runtime.tree.OracleJspCustomTagNode.execute(OracleJspCustomTagNode.java:261)
         at oracle.jsp.runtime.tree.OracleJspNode.execute(OracleJspNode.java:89)
         at oracle.jsp.runtimev2.ShortCutServlet._jspService(ShortCutServlet.java:89)
         at oracle.jsp.runtime.OracleJspBase.service(OracleJspBase.java:29)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:422)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:802)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:726)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:175)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:253)
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:410)
         ... 53 more
    Caused by: oracle.jbo.DMLException: JBO-26061: Error while opening JDBC connection.
         at oracle.jbo.server.DBTransactionImpl.establishNewConnection(DBTransactionImpl.java:1030)
         at oracle.jbo.server.DBTransactionImpl.initTransaction(DBTransactionImpl.java:1170)
         at oracle.jbo.server.DBTransactionImpl.initTxn(DBTransactionImpl.java:6823)
         at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:301)
         at oracle.jbo.server.DBTransactionImpl2.connectToDataSource(DBTransactionImpl2.java:332)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.connect(DefaultConnectionStrategy.java:203)
         at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolConnect(ApplicationPoolMessageHandler.java:592)
         at oracle.jbo.server.ApplicationPoolMessageHandler.doPoolMessage(ApplicationPoolMessageHandler.java:422)
         at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(ApplicationModuleImpl.java:8995)
    Edited by: user9010551 on Apr 24, 2013 5:52 AM

    Can you provide some background information please?
    Does this happen when you run the app from within jdev or on a stand alone server?
    Have you checked that the jdbc connection you used to build the app is correct (username, password and other connection data)?
    Is this an ADF rich faces application?
    Do you use jdbc url or jdbc data source?
    Timo

  • How to deploy/debug maven project in workshop?

    I've installed m2eclipse in Workshop 10.0. I'm able to download maven projects from a subversion repository. m2eclipse allows right-clicking for maven-install, maven-build, maven-package. Build generates a proper war file.
    But Workshop does not recognize it as a web project so it will not allow me to deploy it to my local server. Anyway to get this to work?
    I know in the past, checkouting out source from SVN/CVS, a project wizard pops up and allows you to set the project type.
    Right now, I'm manually installing my war file to the app server. If I want to do any debugging it will have to be remote debugging. But that requires a few more steps to deal with. A productivity killer.

    The File->import->WAR option might solve your problem.
    See:
    http://helponline.oracle.com/jdeveloper/help?topic=ide_pfilesimportingexistingintojdev_html

  • Debugging across projects

    I have one application, which has a main project with other include jars which i deploy as ADF jars and then add it to this project.
    now when i run one page of the main project it calls the task flows from the other ADF jars and displays some graphs on the page. is there a way i can debug the ADF jars code while running the main page of the main project which calls the task flow of the ADF jars.
    please post your queries if the problem is not clear
    Thanks in advance
    Jeetendra

    user13332880 wrote:
    how do i put a break point in the other projects source code which would be encountered while debugging one page from the main project ?You put the breakpoints that you want anywhere in the code, and you enable remote debugging for the specific project. You start remote debugging on the specific project by right-clicking on it and select Start Remote Debugger. This will attach JDeveloper to WebLogic. You run the main application deployed on the stand-alone WebLogic directly in the browser (not in JDeveloper). The application breaks directly into your specific project in JDeveloper.

  • Debug and project window

    Hello there fellow folks.
    I have an issue with the "project window" or what it is called.
    Im building a project in c++ Visual studio 2010 Pro
    I've downloaded a template that would allow me too use the features of directX.
    Now when starting up the project, either in debug or non-debug mode
    two project windows appear.
    first too appear is some what of a test window, which runs the project just fine and all.
    then when the window/execution feels "good" about itself - if it loaded trough all data or whatnot it closes
    itself, then the second project window appear, thats when visual studio reacts and changes its window header to
    "visual studio 2010 (RUNNING) blabla"
    I just feel annoyed that two project solutions appear next too eachother, when it rather would have only 1.
    they both work problemless, but still the time it takes too load them both up is annoying.
    i've searched for this problem/issue, but can't find someone else charing my experience with this.

    Hi Sir,
    This is Microsoft Office suit Visio forum, not  Microsoft Visual Studio forum, you'd better post the question there to get more help. :)
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup
    Regards,
    George Zhao
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Premiere Debug Event - Project.cpp-1843. Media Encoder crashes.

    Hi - my first post here.
    I will try and provide as much information as I can. After looking at some others people's questions, I still cannot rectify this problem.
    I am using Premiere CS5 (Version 5.0.3) to update a project that was on an external hard drive. I completed the updates to the video and tried to export to Media Encoder. I got the following message:
    Premiere Pro has encountered an error
    [..\..Src\Project\Project.cpp-1843]
    Premiere then closes, but Media Encoder stays open.
    After searching for that specific error on the web, I found nothing.
    I have since moved the project to an internal hard drive - nope.
    I have gone through the whole project to see if there are any corrupted files etc - nope.
    I got this error a few days again, tried unsuccessfully to fix it, went into other projects and exported videos through Media Encoder fine. Came back into this project - same issue.
    My PC is running Windows Vista Business 64-bit on an i7 2.67GHz processor with 12GB of RAM.
    Unfortunately, Premiere does not provide me with any crash report - how do I get one?
    If somebody could help me out, I would really appreciate - thanks!

    Hi Todd - thanks for your help.
    My apologies, it is definitely Premiere that crashes. Media Encoder stays open, but obviously the file does not import into the Encoder properly because of the crash.
    I have tried it on a second sequence in the project and it has the same error.
    I've never had this problem before - my boss was trying to get the Mercury playback working a few days ago, maybe that has something to do with it?
    Thanks.

  • How to release the sunidm project from the server while debugging

    Hello,
    I am using NetBean to work on the SunIDM project. Each time I have to restart NetBean if I want to run/debug the project. I have tried to use GlassFish and Tomcat, but both server somehow still holding the project even I stopped debugging in NetBean. Is there a good way to have the server release the project so I don't have to restart NetBean? It make my debugging time so slow.
    Thank you so much.

    Hi,
    I you have ur request no, please goto se09 or se10,
    request status must be MODIFABLE,
    -> locate ur request no, release by clicking ur request and then clicking RELASE DIRECT truck in application tool bar.
    -> click or refresh
    -> Login to ur production server
    -> goto STMS_IMPORT click on the PRD server
    -> Locate ur request,
    ->Select using the select SELECT with arrow in application tool bar
    ->then click on the request IMPORT REQUEST truck or CTRL + F11.
    regards,
    Prabhu
    reward if it is helpful.

  • Debugging 7.1 project fails with exception

    I'm trying to debug a 7.1 project in netbeans 5.5 with plugin 7.1 via Debug Main project. It fails with an ecxeption:
    com.sun.idm.debugger.common.DebuggerNotEnabledException
    I checked the suggestion displayed in the same message box, "please set the system configuration property ServerSettings.C23461 (or default).debugger.enabled=true.
    It was already marked true for the default instance and I tried it using the actual hostname. Both fail actually.
    Does anybody has an idea where to look for a solution?
    Thanks.
    Rob

    I ran into this error the other day with 7.1/NB5.5, and setting the default value in System Configuration worked...
    ...<Attribute name='serverSettings'>
    <Object>
    <Attribute name='default'>
    <Object>
    <Attribute name='debugger'>
    <Object>
    <Attribute name='enabled'>...
    Did you restart the App Server?

  • Issue in deploying Service Bus projects using maven

    Hi,
    I am following the following documentation for deploying service bus projects to my OSB server.
    http://docs.oracle.com/middleware/1213/core/MAVEN/osb_maven_project.htm#MAVEN8973
    I was able to issue mvn package as described in documentation and also able to see sbar files in .data/Maven directory of each project.
    But i am seeing following error when i issue mvn pre-integration-test. Am i missing any steps.
    [INFO] --- oracle-servicebus-plugin:12.1.3-0-0:deploy (default-deploy) @ System ---
    [INFO] Service Bus Archive deployed using session Service_Bus_Maven-System-1424718369010.
    java.io.IOException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'w
    eblogic.management.mbeanservers'
            at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.ja
    va:237)
            at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.j
    ava:120)
            at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:369)
            at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:267)
            at oracle.sb.maven.plugin.deploy.MBeanHelper$MBeanInvocationHandler.getJMXConnector(MBeanHel
    per.java:228)
            at oracle.sb.maven.plugin.deploy.MBeanHelper$MBeanInvocationHandler.invoke(MBeanHelper.java:
    131)
            at com.sun.proxy.$Proxy16.createSession(Unknown Source)
            at oracle.sb.maven.plugin.DeployMojo.createSession(DeployMojo.java:141)
            at oracle.sb.maven.plugin.DeployMojo.execute(DeployMojo.java:89)
            at org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.j
    ava:101)
            at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:209)
            at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153)
            at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145)
            at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBu
    ilder.java:84)
            at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBu
    ilder.java:59)
            at org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter
    .java:183)
            at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161)
            at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:320)
            at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161)
            at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:320)
            at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156)
            at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537)
            at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196)
            at org.apache.maven.cli.MavenCli.main(MavenCli.java:141)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
            at java.lang.reflect.Method.invoke(Method.java:606)
            at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290)
            at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230)
            at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409)
            at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352)
    Caused by: javax.naming.NameNotFoundException: Unable to resolve 'weblogic.management.mbeanservers.d
    omainruntime'. Resolved 'weblogic.management.mbeanservers' [Root exception is javax.naming.NameNotFo
    undException: Unable to resolve 'weblogic.management.mbeanservers.domainruntime'. Resolved 'weblogic
    .management.mbeanservers']; remaining name 'domainruntime'
            at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:1180
            at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:270)
            at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:187)
            at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:210)
            at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:224)
            at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:224)
            at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:224)
            at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
            at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:701)
            at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:231)
            at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:527)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
            at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:523)

    Hi Siva,
    I am facing same issue I am bale to create package but while deployment goal I am facing problem.I am following same document as you do.
    I can see my mvn-pre-integration ..show me sucees in result
    [DEBUG]   Excluded: org.apache.maven:maven-artifact:jar:3.0.3
    [DEBUG] Configuring mojo com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:package from plugin realm ClassRealm[plugin>com.oracle.servicebus.plugin:oracl
    -servicebus-plugin:12.1.3-0-0, parent: sun.misc.Launcher$AppClassLoader@65450f1f]
    [DEBUG] Configuring mojo 'com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:package' with basic configurator -->
    [DEBUG]   (f) oracleHome = C:\Oracle\Middleware\Oracle_Home
    [DEBUG]   (f) project = MavenProject: LinuxMachine:TestOSBLinux:1.0-SNAPSHOT @ C:\JDeveloper\mywork\OSB-DEPLOY\LinuxMachine\TestOSBLinux\pom.xml
    [DEBUG]   (f) system = false
    [DEBUG] -- end configuration --
    [INFO]
    [INFO] --- oracle-servicebus-plugin:12.1.3-0-0:deploy (default-deploy) @ TestOSBLinux ---
    [DEBUG] Configuring mojo com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy from plugin realm ClassRealm[plugin>com.oracle.servicebus.plugin:oracle
    servicebus-plugin:12.1.3-0-0, parent: sun.misc.Launcher$AppClassLoader@65450f1f]
    [DEBUG] Configuring mojo 'com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy' with basic configurator -->
    [DEBUG]   (f) oraclePassword = Oracle123
    [DEBUG]   (f) oracleServerUrl = http://192.168.137.150:7001
    [DEBUG]   (f) oracleUsername = weblogic
    [DEBUG]   (f) project = MavenProject: LinuxMachine:TestOSBLinux:1.0-SNAPSHOT @ C:\JDeveloper\mywork\OSB-DEPLOY\LinuxMachine\TestOSBLinux\pom.xml
    [DEBUG] -- end configuration --
    [INFO] Service Bus Archive deployed using session Service_Bus_Maven-TestOSBLinux-1429888616161.
    [INFO]
    [INFO] --- oracle-servicebus-plugin:12.1.3-0-0:deploy (deploy) @ TestOSBLinux ---
    [DEBUG] Configuring mojo com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy from plugin realm ClassRealm[plugin>com.oracle.servicebus.plugin:oracle
    servicebus-plugin:12.1.3-0-0, parent: sun.misc.Launcher$AppClassLoader@65450f1f]
    [DEBUG] Configuring mojo 'com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0:deploy' with basic configurator -->
    [DEBUG]   (f) oraclePassword = Oracle123
    [DEBUG]   (f) oracleServerUrl = http://192.168.137.150:7001
    [DEBUG]   (f) oracleUsername = weblogic
    [DEBUG]   (f) project = MavenProject: LinuxMachine:TestOSBLinux:1.0-SNAPSHOT @ C:\JDeveloper\mywork\OSB-DEPLOY\LinuxMachine\TestOSBLinux\pom.xml
    [DEBUG] -- end configuration --
    [INFO] Service Bus Archive deployed using session Service_Bus_Maven-TestOSBLinux-1429888623126.
    [INFO]
    [INFO] ------------------------------------------------------------------------
    [INFO] Building LinuxMachine 1.0-SNAPSHOT
    [INFO] ------------------------------------------------------------------------
    [DEBUG] Lifecycle default -> [validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-so
    rces, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, i
    tegration-test, post-integration-test, verify, install, deploy]
    [DEBUG] Lifecycle clean -> [pre-clean, clean, post-clean]
    [DEBUG] Lifecycle site -> [pre-site, site, post-site, site-deploy]
    [DEBUG] === PROJECT BUILD PLAN ================================================
    [DEBUG] Project:       LinuxMachine:LinuxMachine:1.0-SNAPSHOT
    [DEBUG] Dependencies (collect): []
    [DEBUG] Dependencies (resolve): []
    [DEBUG] Repositories (dependencies): [central (https://repo.maven.apache.org/maven2, default, releases)]
    [DEBUG] Repositories (plugins)     : [central (https://repo.maven.apache.org/maven2, default, releases)]
    [DEBUG] =======================================================================
    [INFO] ------------------------------------------------------------------------
    [INFO] Reactor Summary:
    [INFO]
    [INFO] TestOSBLinux ....................................... SUCCESS [ 20.752 s]
    [INFO] LinuxMachine ....................................... SUCCESS [  0.009 s]
    [INFO] ------------------------------------------------------------------------
    [INFO] BUILD SUCCESS
    [INFO] ------------------------------------------------------------------------
    But not get deployed .....
    When i  run mvn com.oracle.servicebus.plugin:oracle-servicebus-plugin:deploy**  to invoke deployment goal it fails which below logs
    org.apache.maven.plugin.MojoNotFoundException: Could not find goal 'deploy*.*' in plugin com.oracle.servicebus.plugin:oracle-servicebus-plugin:12.1.3-0-0 amon
    goals deploy, package
            at org.apache.maven.plugin.internal.DefaultMavenPluginManager.getMojoDescriptor(DefaultMavenPluginManager.java:275)
            at org.apache.maven.plugin.DefaultBuildPluginManager.getMojoDescriptor(DefaultBuildPluginManager.java:239)
            at org.apache.maven.lifecycle.internal.MojoDescriptorCreator.getMojoDescriptor(MojoDescriptorCreator.java:233)
            at org.apache.maven.lifecycle.internal.DefaultLifecycleTaskSegmentCalculator.calculateTaskSegments(DefaultLifecycleTaskSegmentCalculator.java:103)
            at org.apache.maven.lifecycle.internal.DefaultLifecycleTaskSegmentCalculator.calculateTaskSegments(DefaultLifecycleTaskSegmentCalculator.java:83)
            at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:85)
            at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:355)
            at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:155)
            at org.apache.maven.cli.MavenCli.execute(MavenCli.java:584)
            at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:216)
            at org.apache.maven.cli.MavenCli.main(MavenCli.java:160)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
            at java.lang.reflect.Method.invoke(Method.java:606)
            at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:289)
            at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:229)
            at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:415)
            at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:356)
    [ERROR]
    [ERROR]
    Thanks&Regards
    Prabhat

  • Error when creating SharePoint WebPart - "An error occurred while generating the project"

    I am getting a Error in Visual Studio when I create a SharePoint Web Part.. "An error occurred while generating the project. Please see the Visual Studio Output window for more information."
    I have checked the Output window and there is noting in it. When I click OK I get the next error that states "Object reference not set to an instance of an object".
    After I click oky.. There seems to be files missing in the project menu.. 
    I am using Visual Studio 2013 Ultimate and SharePoint 2013 Enterprise. These run on Windows Server 2012 R2..
    This mind boggling.. Hope someone can help me..
    Thanks

    Hi,
    For better troubleshooting, I suggest you do as the followings:
    Create a new clean project. In this projcect, you can just create a new web part to check whehter it works.
    Debug the project step by step and try to find which object reference not set to an instance of an object.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • Devloper system configuration (weblogic in debug mode on Eclipse/windows)

    Hi,
    I work on a project, which we may consider as big. Couple of thousads of java files, muilti-tired. We use, weblogic in eclipse on widows for development. Curreltly we have 1G ram on each of developer mechines. But most of us are complaining that, system is running slow in debug mode. Sometimes, we can't even work.
    I greatly appreciate if somebody can point me to the URL or suggestion for good system configuration, so that we can work comfortably.
    Just asking to increase the RAM may not help me in convencing the business/management. If there any specific recommandations by either by BEA or IBM (eclipse), that helps me a lot in raising the same to our buisness.
    Greatly appricate your suggestions
    Reg,
    Mahi

    Hi Bigmachini,
    According to my solution, what about your issue now?
    If you have been solved the issue, would you mind sharing us the solution here? So it would be helpful for other members who get the same issue.
    If not, please let us know the latest information about it.
    @Malik, could you please tell me if you try to check your issue by the above suggestion as I said?
    If no, please try the above suggestions to check this issue and then tell me the latest message about this issue.
    >>The error mostly occurs when debugging ADO.NET or database function calls. If code is run without debugging then there is no issue at all.
    You could also try to copy your project and then debug your project in debug mode on a another machine you install same Windows 10 OS check this issue again.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Flash CC 2014 14.1.0.96 Crashing on attempt to debug in iOS Simulator

    Just like the title says, Flash CC 2014 14.1.0.96 is completely crashing every time I try and debug my project in the iOS simulator via the Debug > Debug Movie > On iOS Simulator command. I have XCode version 6.1 installed. The simulator never opens - Flash crashes while the "Publishing..." progress bar is showing, after about 5 seconds.
    I've tried the following iOS Simulator SDK paths in the Air 14.0 for iOS Publish settings:
    /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SD Ks/iPhoneSimulator.sdk/
    and
    /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/SD Ks/iPhoneSimulator8.1.sdk/
    But both cause Flash CC 2014 to crash completely.
    I should note that Publishing directly to my iPad works properly. Flash only crashes when trying to debug in the simulator.
    The crash generates a rather lengthy error report. Here's the top part of it:
    Process:               Adobe Flash CC 2014 [18187]
    Path:                  /Applications/Adobe Flash CC 2014/Adobe Flash CC 2014.app/Contents/MacOS/Adobe Flash CC 2014
    Identifier:            com.adobe.Adobe Flash CC 2014.application
    Version:               14.1.0 (14.1.0.96)
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Adobe Flash CC 2014 [18187]
    User ID:               501
    Date/Time:             2014-10-30 19:27:03.689 -0400
    OS Version:            Mac OS X 10.10 (14A389)
    Report Version:        11
    Anonymous UUID:        D572A920-72C5-3A81-FC6C-5190EEE5CC54
    Sleep/Wake UUID:       3AAEBF78-CC4E-4B94-8C18-DB6F9F2C1915
    Time Awake Since Boot: 620000 seconds
    Time Since Wake:       330000 seconds
    Crashed Thread:        37
    Exception Type:        EXC_CRASH (SIGABRT)
    Exception Codes:       0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    Performing @selector(dispatchMenuSelection:) from sender DVAMacMenuItem 0x6080000eaa80
    [18187] stack overflow
    If you'd like the full version let me know.
    Please help! Being able to test in the simulator will improve my life exponentially.
    Thanks

    Hi All,
    Thanks for your patience. All the issues related to iOS simulator, XCode 6.x have been fixed in latest release of FlashPro CC 2014 (Build No. 14.2.0.20) which was released yesterday.
    Requesting you to please update and try and let us know if you still face any issues.
    You can update your Flash CC 2014 build by just going to Help>Updates or through Creative Cloud App.
    You can learn more about the update at Flash Professional Help | New features summary
    Rgds,
    Mukesh

Maybe you are looking for

  • Local domain, IIS Hosting and SMTP issues.

    I have a local domain on Windows server 2012 with dns, dhcp, iis and smtp. (Yes, I am aware of the dangers of these combinations) it is for learning purposes only and not my main pc.  My local domain is willow.run and I am hosting a website, the doma

  • Box in Template Cell(Smartforms)

    Hi all, I am having a text inside a Template Cell. I need to have box,all around the text. The system (ECC 6.0)is not allowing borders in the template. Please suggest some way to do this. Thanks in advance Regards Ananya

  • CC&B 2.3.1 - Custom indexes for base tables

    Hi, We are seeing a couple of statements in the database that could improve its performance with new custom indexes on base tables. Questions are: - can we create new indexes on base tables ? - is there any recommendations about naming, characteristi

  • Lyrics wont add on my ipod Ios 5.0.1

    I have tried to add lyrics to my songs for days now and they will show up on my computer but not on my ipod. Is there a reason for this?

  • RMAN - Adding new Tablespaces

    After having run rman for 2 months, new tablespaces have been added today. I ran a full backup with rman, but the new tablespaces do not show with: list backup; Also RESTORE DATABASE VALIDATE; returns no errors. How can I ensure, the backup is up to