Debugging in cluster
Hi,
we set up a Web AS with several server nodes for development. Each developer of our team is (logically) associated with one server node. So we want to ensure that all developers can debug their part of the application without interferring with another.
Debugging in the cluster works fine so far. But if a process is reserved for debugging we cannot deploy DCs. So we have to "release the process for debugging". When we do that the server node is restarted. This all takes a lot of time and we can´t really work that way.
Does anyone have experience with this constellation and how can we achieve good development performance?
Regards
Helmut
There are debug flags that can be set dynamically from Admin console.
It would makes sense to understand the error/exception before enabling the right flag.
There are deployment as well cluster specific debug flags that can be set from wls Admin console
-Vijay
Similar Messages
-
Deactivating and Activating Brokers all the time in Conv Cluster normal?
hi *,
i just wanted to know if this is a normal behaviour.
we do have a conventional cluster with 8 + 1 node
8 workes and 1 master.
in our cluster jmq logfiles we are very often getting this messages:
[26/Sep/2008:13:54:16 CEST] [B1179]: Activated broker
Address = mq://example.com:36105/?instName=jmqDivAccA2&brokerSessionUID=6667329240416509952
StartTime = 1222429874806
ProtocolVersion = 410
[26/Sep/2008:13:54:16 CEST] [B1072]: Closed cluster connection to broker mq://example.com:36105/?instName=jmqDivAccA2&brokerSessionUID=6667329240416509952
[26/Sep/2008:13:54:16 CEST] [B1180]: Deactivated broker
Address = mq://example.com:36105/?instName=jmqDivAccA2&brokerSessionUID=6667329240416509952
StartTime = 1222429874806
ProtocolVersion = 410
[26/Sep/2008:13:54:16 CEST] [B1179]: Activated broker
Address = mq://example.com:39105/?instName=jmqCzeAccA2&brokerSessionUID=8358993850445347840
StartTime = 1222429866204
ProtocolVersion = 410
[26/Sep/2008:13:54:16 CEST] [B1072]: Closed cluster connection to broker mq://example.com:39105/?instName=jmqCzeAccA2&brokerSessionUID=8358993850445347840
[26/Sep/2008:13:54:16 CEST] [B1180]: Deactivated broker
Address = mq://example.com:39105/?instName=jmqCzeAccA2&brokerSessionUID=8358993850445347840
StartTime = 1222429866204
ProtocolVersion = 410
[26/Sep/2008:13:54:16 CEST] [B1179]: Activated broker
Address = mq://example.com:37100/?instName=jmqSsfAccA1&brokerSessionUID=1687473902759115264
StartTime = 1222235763760
ProtocolVersion = 410
[26/Sep/2008:13:54:16 CEST] [B1072]: Closed cluster connection to broker mq://example.com:37100/?instName=jmqSsfAccA1&brokerSessionUID=1687473902759115264
[26/Sep/2008:13:54:16 CEST] [B1180]: Deactivated broker
Address = mq://example.com:37100/?instName=jmqSsfAccA1&brokerSessionUID=1687473902759115264
StartTime = 1222235763760
ProtocolVersion = 410 any idea why this happens so often?
right now all the nodes reside on the same hardware (very low delay) and use almost non CPU usage.
regards chrishi linda,
this cluster is for test cases on the same machine and using the very same binaries.
therefore there is for shure no version conflict or something similar.
can you send me the line how to turn on debug for cluster communication?
every broker is started like this:
nohup imqbrokerd -name jmqXXXXXXXXA1 -port 39100 -bgnd -Dimq.cluster.url=file:/home/caps/XXXXXXXXXX/broker.config -varhome /home/caps/XXXXXXXX/jmqXXXXA1 > jmqXXXXA1.out 2>&1 &and broker config is like this:
imq.cluster.brokerlist=servername:35100,servername:35105,servername:36100,servername:36105,servername:37100,servername:37105,servername:38100,servername:38105,servername:39100,servername:39105
imq.cluster.masterbroker=servername:34100after our system was patched yesterday i can not reproduce this behaviour anymore.
BUT it would be great if you can send me the lines for debuging....
regards chris -
Firefox sync error server incorrectly configured
The very first time I loaded firefox on my laptop (which i bought only a couple months ago) the syncing worked just fine.
After i dont know how much time i started getting errors that the syncing was failing. I tried to reconfigure the syncing properties but started getting the error server incorrectly configured. I scoured the net looking for answers following all the troubleshooting that I could find.
One thing I notice is that when i choose I have an account it is supposed to load a key that i can use on my already synced devices but that never actually populates and it immediately kicks me to the user name password and sync key screen. This issue remained throughout the duration of all the troubleshooting below. Additionally I cant even create a new sync account on that pc as it fails everytime.
I have done the following in a effort to resolve this issue.
I created a new sync account using one of my other pcs
I added a pc that was never on the sync account to it to verify it does it fact sync
i uninstalled firefox 4 separate times deleting all the folders and even as far as the registry keys
i tried using a lan connection vs wifi
i updated windows
My computer;
I have a lenovo ideapad with windows 7 and 8 gigs of ram with a amd processor
My LOG:
1308530082634 Service.Main INFO Loading Weave 1.7b1pre
1308530082645 Engine.Bookmarks DEBUG Engine initialized
1308530082646 Engine.Forms DEBUG Engine initialized
1308530082646 Engine.History DEBUG Engine initialized
1308530082647 Engine.Passwords DEBUG Engine initialized
1308530082647 Engine.Prefs DEBUG Engine initialized
1308530082647 Engine.Tabs DEBUG Engine initialized
1308530082648 Engine.Tabs DEBUG Resetting tabs last sync time
1308530082648 Service.Main INFO Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1
1308530082651 SyncKeyBundle INFO SyncKeyBundle being created for
1308530086186 Net.Resource DEBUG GET cached: 0
1308530086186 Service.JPAKEClient ERROR Error acquiring channel ID. Server responded with HTTP 0
1308530086187 Service.JPAKEClient DEBUG Aborting...
1308530123488 Service.Main INFO Logging in user mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3
1308530123489 Service.Main DEBUG Finding cluster for user mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3
1308530125046 Net.Resource DEBUG GET cached: 0
1308530125047 Net.Resource DEBUG Status 0 in Resource.get: retrying once.
1308530126636 Net.Resource DEBUG GET cached: 0
1308530126636 Service.Main DEBUG cluster value = https://phx-sync061.services.mozilla.com/
1308530126637 Service.Main DEBUG Caching URLs under storage user base: https://phx-sync061.services.mozilla.com/1.0/mkfrlxkbrzyhl4glxtgruf3z7t6xlrm3/
1308530128303 Net.Resource DEBUG GET cached: 0
1308530128303 Net.Resource DEBUG Status 0 in Resource.get: retrying once.
1308530129607 Net.Resource DEBUG GET cached: 0
1308530129642 Service.Main DEBUG Exception: Login failed: error.login.reason.server No traceback available
1308530132819 Service.Main INFO Service reset.
1308530132820 Engine.Clients DEBUG Resetting clients last sync time
1308530132820 Engine.Bookmarks DEBUG Resetting bookmarks last sync time
1308530132821 Engine.Forms DEBUG Resetting forms last sync time
1308530132822 Engine.History DEBUG Resetting history last sync time
1308530132823 Engine.Passwords DEBUG Resetting passwords last sync time
1308530132825 Engine.Prefs DEBUG Resetting prefs last sync time
1308530132825 Engine.Tabs DEBUG Resetting tabs last sync time
1308530132826 CollectionKeys INFO Clearing CollectionKeys...
the couple of lines that stand out to me are
1308530086186 Net.Resource DEBUG GET cached: 0
1308530086186 Service.JPAKEClient ERROR Error acquiring channel ID. Server responded with HTTP 0
appears it is trying to check some cache or something and cant find it so it just gives up....
please help I have spent countless hours trying to fix this.One addition note: in my own situation, I checked my about:config and saw my sync server's URL (https://scl2-sync42.services.mozilla.com/ ). I entered it into my address bar and got the following message:
"server issue: database is not healthy"
(quotes were included) I've seen no mention of such a phrase in a Google search, so I assume that no one else has reported any such thing.
Going into my about:config, I deleted the URL and it synced just fine! -
Error while configuring Shared Services v11.1.1.3 with websphere
We are trying to configure webpshere v6.1 with shared services v11.1.1.3 but during configuration getting following error in configtool.log file
(Jul 15, 2010, 08:09:32 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Product Foundation belongs to editDefaultOnly group.
(Jul 15, 2010, 08:09:32 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Default cluster doesn't exist, set default port # to: 28080
(Jul 15, 2010, 08:09:32 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Print EditDefaultCluster option only.
(Jul 15, 2010, 08:09:39 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Select to edit Default cluster.
(Jul 15, 2010, 08:09:45 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, Set system values for EditDefaultCluster, host=ga016a2b1 , port=28080
(Jul 15, 2010, 08:09:45 AM), com.hyperion.cis.config.ClusterSetupDialogConsoleImpl, DEBUG, user select to edit default cluster -- host and port is:
(Jul 15, 2010 8:09:48 AM), Install.product.install, com.installshield.wizard.console.ConsoleWizardUI, err, java.lang.NullPointerException
STACK_TRACE: 10
java.lang.NullPointerException
at java.io.File.<init>(File.java:220)
at com.hyperion.cis.config.wizard.WebSphereDeploymentPanel.checkWASPermissions(WebSphereDeploymentPanel.java:262)
at com.hyperion.cis.config.wizard.WebSphereDeploymentPanel.queryExit(WebSphereDeploymentPanel.java:69)
at com.installshield.wizard.console.ConsoleWizardUI.doNext(Unknown Source)
at com.installshield.wizard.console.ConsoleWizardUI$ConsoleNavigationController.displayOptions(Unknown Source)
at com.installshield.wizard.console.ConsoleWizardUI.currentBeanChanged(Unknown Source)
at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1822)
(Jul 15, 2010 8:09:48 AM), Install.product.install, com.installshield.wizard.console.ConsoleWizardUI, err, could not display error message panel -- exiting wizard
Could anyone can help us on this issue? why did this issue occur during configuration. we are not sure what was missing.Hi
I'm having the same error message , but I was able to configure my HSS
Anyway, If I have all my Hyperion services running then suddenlly I get the error and I can not work any more with HSS
Maybe there is a limit in my connections or process or session in the database
Have you resolve your problem?
Regards
Loreto -
Heterogeneous clustering with WinNT and Solaris machines.
Hi All,
I've deployed my applications on two WinNT machines which are running in cluster with iWS41. as proxy
server. The shared directory for this clustering is residing on one of these NT machine. I want to put one more
Solaris machine in this clustering. Can anybody suggest me, how the new Solaris machine will access that
shared directory residing on another WinNT machine in LAN, I'm new to Solaris, I also want to know that will
there be any issues regarding this heterogeneous environment for clustering.
Regards,
Jitendra Kumar.
Hi,
If m/c on which shared directoy is, goes
down, all WLS running in cluster will report the problem.
Further WLS may stop unless and untill shared directory is
available again.
Mind it, all WLS should be of same version and same SP on all
for running in cluster perfectly and also same EJBs version
on all m/c if u go for same EJBs copies on all m/c and not using
shared directory.
Regards,
Jitendra.
"Bernhard Lenz" <[email protected]> wrote:
>I'm a bit confused...
>
>Both Rock and you are recommending not to copy the deployed files to a
>shared directory because of the single point of failure. My concern is that
>our admins won't be able to handle multiple copies of the same files and
>debugging a cluster where nodes behave differently because of versioning
>issues might be very difficult. Please help me to clarify the following
>question. Let's say the shared directory is on a separate machine that does
>not have a WL node running on it. All nodes within the WL cluster boot up
>fine and load their files and beans from the shared directory. Now the file
>server with the shared directory goes down. Does it affect the running node
>instances of the cluster? Do they access e.g. the deployed beans during
>runtime or do they only load them upon startup? If last is true a crashed
>shared directory would have no effect on a running cluster.
>
>Please help to clarify.
>
>Thanks
>Bernie
>
>
>"Prasad Peddada" <[email protected]> wrote in message
>news:[email protected]...
>> There is absolutely no necessity to use shared file system to start
>servers in a cluster.
>>
>> All you have to do is start the servers in a cluster mode and use the same
>multicast address. Make sure you have identical settings
>> on both servers as far as application deployment is concerned.
>>
>> Other than that there is no dependencies.
>>
>> - Prasad
>>
>> Jitendra Kumar wrote:
>>
>> > Hi Rock,
>> >
>> > There r two properties :
>> > -weblogic.system.home
>> > -weblogic.home
>> > second one is the local home where a server will look for myserver
>directory.
>> > First one is the one where all servers who want to join will look for
>mycluster directory.
>> >
>> > my concern is that in case of NT boxes first properties is that
>destination of u'r shared directory, so to specify
>> > that shared directory on Solaris what to give as on NT it is being given
>as :
>> > "\\<computername>\<shared directory name>"
>> > Please tell me about that 'SAMBA', from where to get that software and
>how to install that one.
>> >
>> > Regrads,
>> > Jitendra Kumar.
>> >
>> > "Rock" <[email protected]> wrote:
>> > >
>> > >Kumar,
>> > >The system home is the base directory which houses your
>server...regardless
>> > >of what u wish to call it. For example, myserver. The system name is
>the
>> > >actual name of your server .. ie. myserver.
>> > >
>> > >Thus,
>> > >home = c:\myhome
>> > >name = myserver
>> > >
>> > >This does not mean that each system has to view exactly what is within
>the directory on the
>> > >other physical machine necessarily. Each of your instances (on other
>machines of the same machine)
>> > >can have individual characteristics.
>> > >
>> > >Now, if u are in a clustered environment...u will house yet another
>directory under the home dir...which
>> > >u obviously already know about. Then the individual servers will
>reside under that dir...like
>> > >myserver1 and myserver 2...they must be unique.
>> > >
>> > >The properties up until the individual servers should be the same.
>Thus, u should not have a
>> > >problem. Communication between the instances simply are broadcasted on
>your multicast
>> > >address. You can specify any differences at the individual server
>level.
>> > >
>> > >So, Im not sure where your concern is based. Again, I have not tried
>this before.
>> > >Just try it and let me know what happens...we'll go from there.
>> > >Im curious.
>> > >
>> > >I have other concerns about mixing your systems in a production
>env...but lets look
>> > >at this scenario first.
>> > >
>> > >"Jitendra Kumar" <[email protected]> wrote:
>> > >>
>> > >>Hi Rock,
>> > >>
>> > >>U r right, i'm just testing but finally it has to go in production
>env.
>> > >>My Solaris machine is in same LAN so multicast communication will not
>be a problem as of now it's working
>> > >>fine with NT boxes. But the problem is when u start individual servers
>in cluster u specify
>> > >>-Dweblogic.system.home=<shared directory address> and from this shared
>directory picks up properties files
>> > >>or verifies JSP or other files during runtime with local files having
>in directory '\myserver'.
>> > >>As u suggested the same env on solaris box, that's already in place
>but the thing is that locating a common
>> > >>shared directory from Solaris machine for properties file.
>> > >>As documentation is suggesting for this :
>> > >>
>> > >>*****************
>> > >>A RAID system in which files are striped across multiple disks and
>parity information is stored so that the
>> > >> contents of any failed disk can be reconstructed from the
>remaining disks
>> > >> Off-the-shelf file servers can provide fault tolerance
>out-of-the-box, with operating systems such as Solaris and
>> > >> Windows NT providing the software support. Consult with
>your hardware supplier for further information on
>> > >> installing and running such a system
>> > >>********************
>> > >>
>> > >>Can anybody give me some informations regarding set up of the above
>kind of shared file system.
>> > >>
>> > >>Regards,
>> > >>Jitendra Kumar.
>> > >
>>
>> --
>> Cheers
>>
>> - Prasad
>>
>>
>
>
-
Weblogic6.0 clustering problem
Hi All
I need to test clustering features in weblogic6.0 using
WindowsNT machine.I downloaded the wl6.0 and installed on my NT
machine.I added one sever like MSever in the ADMIN console.I started
StartManagedWebLogic with severname and admin host address.I am gettin
these errors.can any body help how to solve this problem.I appreciate
early reply.
D:\weblogic6\wlserver6.0\config\NAMDomain>startManagedWebLogic MServer
http://137.168.67.164:7001
D:\weblogic6\wlserver6.0>set
PATH=.\bin;D:\weblogic6\wlserver6.0\bin;D:\weblogic6\jdk130\bin;C:\Program
Files\Oracle\jre\1.1.7\bin;D:\jdk1.2.2\bin;D:\j2sdkee1.2.2\bin;D:\weblogic\bin;D:\OraHome1\bin;C:\WINNT\sys
D:\weblogic6\wlserver6.0>set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
D:\weblogic6\wlserver6.0>"D:\weblogic6\jdk130\bin\java" -hotspot -ms64m
-mx64m -classpath .;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
-Dweblogic.Domain=NAMDomain -Dweblogic.Name=MServer
"-Dbea.home=D:\weblogic6"
Starting WebLogic Server ....
<Feb 20, 2001 11:21:47 AM EST> <Notice> <Management> <Loading
configuration file .\config\NAMDomain\config.xml ...>
<Feb 20, 2001 11:21:50 AM EST> <Info> <Logging> <Only log messages of
severity "Error" or worse will be displayed in this window. This can be
changed at Admin Console> NAMDomain> Servers> MServer> Logging> Debug
Starting Cluster Service ....
<Feb 20, 2001 11:21:58 AM EST> <Notice> <WebLogicServer> <WebLogic
Server started>
<Feb 20, 2001 11:21:58 AM EST> <Emergency> <WebLogicServer> <Unable to
create a server socket for: FA2880/137.168.67.112, port: 7001.
java.net.BindException: Address in use: JVM_Bind Perhaps the address
FA2880/1
<Feb 20, 2001 11:21:58 AM EST> <Emergency> <WebLogicServer> <The
WebLogic Server is no longer listening for connections. You should
probably restart it.>
<Feb 20, 2001 11:21:58 AM EST> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Feb 20, 2001 11:21:58 AM EST> <Alert> <WebLogicServer> <The shutdown
sequence has been initiated.>
<Feb 20, 2001 11:21:59 AM EST> <Error> <Cluster> <Disconnecting from
cluster MCluster>
<Feb 20, 2001 11:21:59 AM EST> <Error> <Cluster> <Multicast socket
receive error: java.net.SocketException: socket closed
java.net.SocketException: socket closed
at java.net.PlainDatagramSocketImpl.receive(Native Method)
at java.net.DatagramSocket.receive(DatagramSocket.java:392)
at
weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:128)
at
weblogic.cluster.MulticastManager.execute(MulticastManager.java:290)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks in advance
Nagesh
Hi All
I need to test clustering features in weblogic6.0 using
WindowsNT machine.I downloaded the wl6.0 and installed on my NT
machine.I added one sever like MSever in the ADMIN console.I started
StartManagedWebLogic with severname and admin host address.I am gettin
these errors.can any body help how to solve this problem.I appreciate
early reply.
D:\weblogic6\wlserver6.0\config\NAMDomain>startManagedWebLogic MServer
http://137.168.67.164:7001
D:\weblogic6\wlserver6.0>set
PATH=.\bin;D:\weblogic6\wlserver6.0\bin;D:\weblogic6\jdk130\bin;C:\Program
Files\Oracle\jre\1.1.7\bin;D:\jdk1.2.2\bin;D:\j2sdkee1.2.2\bin;D:\weblogic\bin;D:\OraHome1\bin;C:\WINNT\sys
D:\weblogic6\wlserver6.0>set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
D:\weblogic6\wlserver6.0>"D:\weblogic6\jdk130\bin\java" -hotspot -ms64m
-mx64m -classpath .;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
-Dweblogic.Domain=NAMDomain -Dweblogic.Name=MServer
"-Dbea.home=D:\weblogic6"
Starting WebLogic Server ....
<Feb 20, 2001 11:21:47 AM EST> <Notice> <Management> <Loading
configuration file .\config\NAMDomain\config.xml ...>
<Feb 20, 2001 11:21:50 AM EST> <Info> <Logging> <Only log messages of
severity "Error" or worse will be displayed in this window. This can be
changed at Admin Console> NAMDomain> Servers> MServer> Logging> Debug
Starting Cluster Service ....
<Feb 20, 2001 11:21:58 AM EST> <Notice> <WebLogicServer> <WebLogic
Server started>
<Feb 20, 2001 11:21:58 AM EST> <Emergency> <WebLogicServer> <Unable to
create a server socket for: FA2880/137.168.67.112, port: 7001.
java.net.BindException: Address in use: JVM_Bind Perhaps the address
FA2880/1
<Feb 20, 2001 11:21:58 AM EST> <Emergency> <WebLogicServer> <The
WebLogic Server is no longer listening for connections. You should
probably restart it.>
<Feb 20, 2001 11:21:58 AM EST> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Feb 20, 2001 11:21:58 AM EST> <Alert> <WebLogicServer> <The shutdown
sequence has been initiated.>
<Feb 20, 2001 11:21:59 AM EST> <Error> <Cluster> <Disconnecting from
cluster MCluster>
<Feb 20, 2001 11:21:59 AM EST> <Error> <Cluster> <Multicast socket
receive error: java.net.SocketException: socket closed
java.net.SocketException: socket closed
at java.net.PlainDatagramSocketImpl.receive(Native Method)
at java.net.DatagramSocket.receive(DatagramSocket.java:392)
at
weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:128)
at
weblogic.cluster.MulticastManager.execute(MulticastManager.java:290)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks in advance
Nagesh
-
CUCM 9.1.1.2 - NTP unsynchronised
Hello,
I have a problem with the ntp service. The publisher is unsynchronised.
However, the ntp server is reachable by the publisher.
I tried to restart the ntp service but nothing change.
Do I need to restart the server?
Thanks
FredericHello Manish,
the CUCM version is : 9.1.1.20000-5. there are 4 servers. The NTP server is the core switch with a stratum at 1.
Here the result of utils dbreplication status :
Mon Jan 26 17:43:22 2015 main() DEBUG: Replication cluster summary:
SERVER ID STATE STATUS QUEUE CONNECTION CHANGED
D_sub_ccm9_1_1_20000_5 6 Active Connected 0 Jan 6 19:26:14
A_ccm9_1_1_20000_5 2 Active Local 0
B_sub_ccm9_1_1_20000_5 7 Active Connected 0 Jan 6 19:26:14
C_sub_ccm9_1_1_20000_5 5 Active Connected 1060 Jan 6 19:26:37
For NTP service, what file do you need? ntpd?
I checked the logs before to restart the service and the NTP service had already been restarted by itself. -
Patchset3 (11.1.1.4/wls 10.3.4) Remote debugging JDPA in weblogic cluster
Hi,
I am using Patchset3 (JDeveloper 11.1.1.4/ weblogic server 10.3.4). I was wondering how i can remote debug with
a) weblogic managed server that is part of a weblogic cluster
b) the cluster itself that contains multiple managed servers.
Note that i do understand how to remote debug against a weblogic server (e.g. http://jdeveloperfaq.blogspot.com/2009/12/faq-4-how-to-remote-debug-adf.html), but have not been able to find out how i can achieve this against a cluster that has multiple managed servers. Any directions will be appreciated.
Thanks,Hi,
haven't tried it but here are some suggestions that might be of help:
1) Each managed server for each cluster node should be setup for remote debugging. This means that each managed server must be started with the -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=n* options in the WebLogic start-up script. Also Tunneling must be enabled for each managed server for each cluster node.
2) Make sure that you specify a different connection port for each managed server. This is indicated by the address* specifier above.
3) It seems logical to me that you will need to start separate instances of JDeveloper - one for each managed server that you need to attach to.
Let us know how it turns out,
Nick -
What are the WLS 6.1 debug parameters for the startup scripts so you can
watch the cluster chatter b/n managed servers? I can't find this documented
anywhere on the BEA site. I find some references in the newsgroups but
nothing complete. Can someone post the complete set of parameters and
options that can be used? One of the parameters I can't seem to find info
on is the changing the debug level in the startup script.
-Brian
From BEA support....
Please find the various debug flags for cluster that could be entered in
config.xml file
The following enteries will go inside the <ServerDebug xml tag in config.xml
DebugCluster="true"
DebugClusterAnnouncements="true"
DebugClusterFragments="true"
DebugClusterHeartbeats="true"
and for replication these are the flags
DebugReplication="true"
DebugReplicationDetails="true"
So the entry in config.xml will be like this
<ServerDebug DebugHttp="true" DebugConnection="true"/>
and you can add the above tags.
"Brian" <[email protected]> wrote in message
news:[email protected]..
> What are the WLS 6.1 debug parameters for the startup scripts so you can
> watch the cluster chatter b/n managed servers? I can't find this
documented
> anywhere on the BEA site. I find some references in the newsgroups but
> nothing complete. Can someone post the complete set of parameters and
> options that can be used? One of the parameters I can't seem to find info
> on is the changing the debug level in the startup script.
>
> -Brian
>
>
-
Need help debugging desktop crashes
Hi all,
I've started having trouble with random desktop crashes. It only happens occasionally (twice in the past couple of weeks), but my screens black out (no signal). The desktop is still powered on, but I can't ssh to it. I'm pretty sure I wasn't doing anything specific either time to cause the crash.
Unfortunately, I don't have much more information (sorry!). I've been told on the IRC to look at dmesg, the output of which I've pasted below, but I can't really make head nor tail of it.
Ask me and I'll post any other logs/command output that might help.
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.15.8-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Fri Aug 1 08:51:42 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8fc8d7e8-be76-4428-a102-f74fbb580922 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c8fcefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c8fcf000-0x00000000c95d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c95d2000-0x00000000c9825fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c9826000-0x00000000c9832fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c9833000-0x00000000c9851fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c9852000-0x00000000c9856fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000c9857000-0x00000000c9899fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c989a000-0x00000000c9ca9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9caa000-0x00000000c9ff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9ff4000-0x00000000c9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb000000-0x00000000cf1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8H77-V, BIOS 0324 02/15/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FE0000000 write-back
[ 0.000000] 2 base 220000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CB000000 mask FFF000000 uncachable
[ 0.000000] 7 base 22FE00000 mask FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xca000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccf0-0x000fccff] mapped at [ffff8800000fccf0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b3e000, 0x01b3efff] PGTABLE
[ 0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ 0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22fc00000-0x22fdfffff]
[ 0.000000] [mem 0x22fc00000-0x22fdfffff] page 2M
[ 0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x22c000000-0x22fbfffff]
[ 0.000000] [mem 0x22c000000-0x22fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[ 0.000000] [mem 0x200000000-0x22bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x40003fff] page 4k
[ 0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x40005000-0xc8fcefff]
[ 0.000000] [mem 0x40005000-0x401fffff] page 4k
[ 0.000000] [mem 0x40200000-0xc8dfffff] page 2M
[ 0.000000] [mem 0xc8e00000-0xc8fcefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc989a000-0xc9ca9fff]
[ 0.000000] [mem 0xc989a000-0xc99fffff] page 4k
[ 0.000000] [mem 0xc9a00000-0xc9bfffff] page 2M
[ 0.000000] [mem 0xc9c00000-0xc9ca9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xc9ff4000-0xc9ffffff]
[ 0.000000] [mem 0xc9ff4000-0xc9ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x37772000-0x37bb0fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000C9826078 00006C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C98308E0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9826170 00A76A (v02 ALASKA A M I 00000015 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000C9850F80 000040
[ 0.000000] ACPI: APIC 0x00000000C98309D8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000C9830A50 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9830A90 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9830AC8 000460 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9830F28 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C98318D8 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 0x00000000C9832370 0000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000C9832428 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x22fdfffff]
[ 0.000000] NODE_DATA [mem 0x22fdf1000-0x22fdf5fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227400000-ffff88022f3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x22fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xc8fcefff]
[ 0.000000] node 0: [mem 0xc989a000-0xc9ca9fff]
[ 0.000000] node 0: [mem 0xc9ff4000-0xc9ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x22fdfffff]
[ 0.000000] On node 0 totalpages: 2068359
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12808 pages used for memmap
[ 0.000000] DMA32 zone: 819690 pages, LIFO batch:31
[ 0.000000] Normal zone: 19448 pages used for memmap
[ 0.000000] Normal zone: 1244672 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc8fcf000-0xc95d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc95d2000-0xc9825fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9826000-0xc9832fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9833000-0xc9851fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9852000-0xc9856fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9857000-0xc9899fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9caa000-0xc9ff3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca000000-0xcaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88022fa00000 s87168 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s87168 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2036018
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=8fc8d7e8-be76-4428-a102-f74fbb580922 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8059568K/8273436K available (5225K kernel code, 886K rwdata, 1644K rodata, 1116K init, 1284K bss, 213868K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3398.854 MHz processor
[ 0.000026] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.94 BogoMIPS (lpj=11329513)
[ 0.000028] pid_max: default: 32768 minimum: 301
[ 0.000032] ACPI: Core revision 20140214
[ 0.004609] ACPI: All ACPI Tables successfully acquired
[ 0.006765] Security Framework initialized
[ 0.006770] Yama: becoming mindful.
[ 0.007110] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008539] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009174] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009181] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.009321] Initializing cgroup subsys memory
[ 0.009324] Initializing cgroup subsys devices
[ 0.009326] Initializing cgroup subsys freezer
[ 0.009327] Initializing cgroup subsys net_cls
[ 0.009328] Initializing cgroup subsys blkio
[ 0.009342] CPU: Physical Processor ID: 0
[ 0.009343] CPU: Processor Core ID: 0
[ 0.009346] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.009609] mce: CPU supports 9 MCE banks
[ 0.009618] CPU0: Thermal monitoring enabled (TM1)
[ 0.009626] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.009699] Freeing SMP alternatives memory: 20K (ffffffff819f6000 - ffffffff819fb000)
[ 0.010378] ftrace: allocating 20229 entries in 80 pages
[ 0.017451] dmar: Host address width 36
[ 0.017453] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.017459] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.017460] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.017464] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.017464] dmar: RMRR base: 0x000000c9549000 end: 0x000000c9565fff
[ 0.017465] dmar: RMRR base: 0x000000cb000000 end: 0x000000cf1fffff
[ 0.017533] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.017533] HPET id 0 under DRHD base 0xfed91000
[ 0.017534] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.017639] Enabled IRQ remapping in x2apic mode
[ 0.017640] Enabling x2apic
[ 0.017640] Enabled x2apic
[ 0.017644] Switched APIC routing to cluster x2apic.
[ 0.018045] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.051017] smpboot: CPU0: Intel(R) Core(TM) i5-3550 CPU @ 3.30GHz (fam: 06, model: 3a, stepping: 09)
[ 0.051022] TSC deadline timer enabled
[ 0.051028] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.051033] ... version: 3
[ 0.051033] ... bit width: 48
[ 0.051034] ... generic registers: 8
[ 0.051035] ... value mask: 0000ffffffffffff
[ 0.051035] ... max period: 0000ffffffffffff
[ 0.051036] ... fixed-purpose events: 3
[ 0.051036] ... event mask: 00000007000000ff
[ 0.074413] x86: Booting SMP configuration:
[ 0.074416] .... node #0, CPUs: #1
[ 0.087877] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.094547] #2 #3
[ 0.128105] x86: Booted up 1 node, 4 CPUs
[ 0.128108] smpboot: Total of 4 processors activated (27201.78 BogoMIPS)
[ 0.130404] devtmpfs: initialized
[ 0.132695] PM: Registering ACPI NVS region [mem 0xc95d2000-0xc9825fff] (2441216 bytes)
[ 0.132717] PM: Registering ACPI NVS region [mem 0xc9833000-0xc9851fff] (126976 bytes)
[ 0.132719] PM: Registering ACPI NVS region [mem 0xc9857000-0xc9899fff] (274432 bytes)
[ 0.133240] pinctrl core: initialized pinctrl subsystem
[ 0.133269] RTC time: 14:04:30, date: 08/05/14
[ 0.133295] NET: Registered protocol family 16
[ 0.133354] cpuidle: using governor ladder
[ 0.133354] cpuidle: using governor menu
[ 0.133363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.133364] ACPI: bus type PCI registered
[ 0.133365] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.133402] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.133404] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.133461] PCI: Using configuration type 1 for base access
[ 0.134021] ACPI: Added _OSI(Module Device)
[ 0.134022] ACPI: Added _OSI(Processor Device)
[ 0.134023] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.134024] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.135968] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.148373] ACPI: SSDT 0x00000000C9583018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.148602] ACPI: Dynamic OEM Table Load:
[ 0.148603] ACPI: SSDT 0x0000000000000000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.158263] ACPI: SSDT 0x00000000C9584A98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.158527] ACPI: Dynamic OEM Table Load:
[ 0.158528] ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.168175] ACPI: SSDT 0x00000000C9582D98 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.168404] ACPI: Dynamic OEM Table Load:
[ 0.168405] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.178489] ACPI: Interpreter enabled
[ 0.178496] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580)
[ 0.178504] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.178505] ACPI: Using IOAPIC for interrupt routing
[ 0.178521] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.182207] ACPI: Power Resource [FN00] (off)
[ 0.182256] ACPI: Power Resource [FN01] (off)
[ 0.182304] ACPI: Power Resource [FN02] (off)
[ 0.182352] ACPI: Power Resource [FN03] (off)
[ 0.182399] ACPI: Power Resource [FN04] (off)
[ 0.182776] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.182779] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.182857] \_SB_.PCI0:_OSC invalid UUID
[ 0.182858] _OSC request data:1 1f 0
[ 0.182860] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.183226] PCI host bridge to bus 0000:00
[ 0.183228] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.183229] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.183230] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.183232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.183233] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.183234] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.183235] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.183236] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.183237] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.183238] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.183239] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
[ 0.183244] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.183301] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.183326] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.183349] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.183377] pci 0000:00:02.0: [8086:0152] type 00 class 0x038000
[ 0.183384] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.183389] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.183392] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.183462] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.183481] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[ 0.183546] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.183572] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.183601] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.183621] pci 0000:00:16.0: reg 0x10: [mem 0xf7e19000-0xf7e1900f 64bit]
[ 0.183689] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.183750] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.183768] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e17000-0xf7e173ff]
[ 0.183850] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.183888] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.183917] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.183930] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[ 0.183996] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.184024] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.184050] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.184123] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.184153] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.184182] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
[ 0.184254] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.184285] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.184311] pci 0000:00:1c.5: [8086:244e] type 01 class 0x060401
[ 0.184383] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.184414] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.184445] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.184463] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e16000-0xf7e163ff]
[ 0.184545] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.184580] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.184609] pci 0000:00:1f.0: [8086:1e4a] type 00 class 0x060100
[ 0.184751] pci 0000:00:1f.2: [8086:1e00] type 00 class 0x01018f
[ 0.184764] pci 0000:00:1f.2: reg 0x10: [io 0xf110-0xf117]
[ 0.184770] pci 0000:00:1f.2: reg 0x14: [io 0xf100-0xf103]
[ 0.184776] pci 0000:00:1f.2: reg 0x18: [io 0xf0f0-0xf0f7]
[ 0.184783] pci 0000:00:1f.2: reg 0x1c: [io 0xf0e0-0xf0e3]
[ 0.184789] pci 0000:00:1f.2: reg 0x20: [io 0xf0d0-0xf0df]
[ 0.184795] pci 0000:00:1f.2: reg 0x24: [io 0xf0c0-0xf0cf]
[ 0.184863] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.184876] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e15000-0xf7e150ff 64bit]
[ 0.184895] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.184952] pci 0000:00:1f.5: [8086:1e08] type 00 class 0x010185
[ 0.184965] pci 0000:00:1f.5: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.184971] pci 0000:00:1f.5: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.184977] pci 0000:00:1f.5: reg 0x18: [io 0xf090-0xf097]
[ 0.184983] pci 0000:00:1f.5: reg 0x1c: [io 0xf080-0xf083]
[ 0.184990] pci 0000:00:1f.5: reg 0x20: [io 0xf070-0xf07f]
[ 0.184996] pci 0000:00:1f.5: reg 0x24: [io 0xf060-0xf06f]
[ 0.185091] pci 0000:01:00.0: [1002:683d] type 00 class 0x030000
[ 0.185098] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.185103] pci 0000:01:00.0: reg 0x18: [mem 0xf7d00000-0xf7d3ffff 64bit]
[ 0.185107] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.185114] pci 0000:01:00.0: reg 0x30: [mem 0xf7d40000-0xf7d5ffff pref]
[ 0.185135] pci 0000:01:00.0: supports D1 D2
[ 0.185136] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[ 0.185168] pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
[ 0.185175] pci 0000:01:00.1: reg 0x10: [mem 0xf7d60000-0xf7d63fff 64bit]
[ 0.185208] pci 0000:01:00.1: supports D1 D2
[ 0.191417] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.191421] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.191424] pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.191429] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.191505] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.191582] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[ 0.191608] pci 0000:03:00.0: reg 0x10: [mem 0xf7c00000-0xf7c3ffff 64bit]
[ 0.191621] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.191754] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.191784] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.198088] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.198092] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.198097] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.198192] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.198307] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.198328] pci 0000:00:1c.5: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.198337] pci 0000:00:1c.5: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.198338] pci 0000:00:1c.5: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.198339] pci 0000:00:1c.5: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.198340] pci 0000:00:1c.5: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.198341] pci 0000:00:1c.5: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.198342] pci 0000:00:1c.5: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.198344] pci 0000:00:1c.5: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.198345] pci 0000:00:1c.5: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.198346] pci 0000:00:1c.5: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.198347] pci 0000:00:1c.5: bridge window [mem 0xcf200000-0xfeafffff] (subtractive decode)
[ 0.198457] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.198477] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.198478] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.198479] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.198480] pci 0000:04:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.198481] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.198482] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.198483] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.198484] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.198486] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.198487] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.198488] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.198489] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.198490] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.198491] pci 0000:04:00.0: bridge window [mem 0xcf200000-0xfeafffff] (subtractive decode)
[ 0.198687] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.198720] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.198751] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.198781] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.198813] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.198844] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.198875] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.198905] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.198977] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.199032] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.199034] vgaarb: loaded
[ 0.199034] vgaarb: bridge control possible 0000:01:00.0
[ 0.199048] PCI: Using ACPI for IRQ routing
[ 0.200393] PCI: pci_cache_line_size set to 64 bytes
[ 0.200434] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.200435] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.200436] e820: reserve RAM buffer [mem 0xc8fcf000-0xcbffffff]
[ 0.200437] e820: reserve RAM buffer [mem 0xc9caa000-0xcbffffff]
[ 0.200438] e820: reserve RAM buffer [mem 0xca000000-0xcbffffff]
[ 0.200439] e820: reserve RAM buffer [mem 0x22fe00000-0x22fffffff]
[ 0.200497] NetLabel: Initializing
[ 0.200497] NetLabel: domain hash size = 128
[ 0.200498] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.200505] NetLabel: unlabeled traffic allowed by default
[ 0.200518] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.200521] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.202536] Switched to clocksource hpet
[ 0.205461] pnp: PnP ACPI init
[ 0.205473] ACPI: bus type PNP registered
[ 0.205530] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.205532] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.205540] pnp 00:01: [dma 4]
[ 0.205552] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.205566] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.205624] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.205654] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.205655] system 00:04: [io 0x0200-0x020f] has been reserved
[ 0.205657] system 00:04: [io 0xffff] has been reserved
[ 0.205658] system 00:04: [io 0xffff] has been reserved
[ 0.205659] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.205660] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.205662] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.205663] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.205664] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.205687] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.205719] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.205721] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.205773] system 00:07: [io 0x0290-0x029f] has been reserved
[ 0.205775] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.205807] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.205809] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.205827] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.205968] pnp 00:0a: [dma 0 disabled]
[ 0.206001] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.206148] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.206149] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.206151] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.206152] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.206153] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.206155] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.206157] system 00:0b: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.206158] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.206159] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.206160] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.206162] system 00:0b: [mem 0xcf200000-0xcf200fff] has been reserved
[ 0.206163] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.206259] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
[ 0.206260] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved
[ 0.206262] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.206275] pnp: PnP ACPI: found 13 devices
[ 0.206276] ACPI: bus type PNP unregistered
[ 0.212140] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.212142] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.212143] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.212170] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.212171] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.212172] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.212176] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf300000-0xcf4fffff]
[ 0.212181] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf500000-0xcf6fffff 64bit pref]
[ 0.212182] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.212184] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.212185] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.212187] pci 0000:00:01.0: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.212189] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.212191] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.212193] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.212197] pci 0000:00:1c.0: bridge window [mem 0xcf300000-0xcf4fffff]
[ 0.212200] pci 0000:00:1c.0: bridge window [mem 0xcf500000-0xcf6fffff 64bit pref]
[ 0.212205] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.212207] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.212211] pci 0000:00:1c.4: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.212217] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.212236] pci 0000:00:1c.5: PCI bridge to [bus 04-05]
[ 0.212246] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.212247] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.212248] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.212249] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.212250] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.212251] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.212252] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.212253] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.212254] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.212255] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
[ 0.212257] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.212258] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.212259] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.212260] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.212261] pci_bus 0000:02: resource 1 [mem 0xcf300000-0xcf4fffff]
[ 0.212262] pci_bus 0000:02: resource 2 [mem 0xcf500000-0xcf6fffff 64bit pref]
[ 0.212263] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.212264] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.212265] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.212266] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.212267] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.212269] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.212270] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.212271] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.212272] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.212273] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.212274] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.212275] pci_bus 0000:04: resource 13 [mem 0xcf200000-0xfeafffff]
[ 0.212276] pci_bus 0000:05: resource 8 [io 0x0000-0x0cf7]
[ 0.212277] pci_bus 0000:05: resource 9 [io 0x0d00-0xffff]
[ 0.212278] pci_bus 0000:05: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.212279] pci_bus 0000:05: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.212280] pci_bus 0000:05: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.212281] pci_bus 0000:05: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.212282] pci_bus 0000:05: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.212283] pci_bus 0000:05: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.212285] pci_bus 0000:05: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.212286] pci_bus 0000:05: resource 17 [mem 0xcf200000-0xfeafffff]
[ 0.212301] NET: Registered protocol family 2
[ 0.212405] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.212505] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.212611] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.212623] TCP: reno registered
[ 0.212629] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.212649] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.212685] NET: Registered protocol family 1
[ 0.245935] pci 0000:01:00.0: Boot video device
[ 0.245938] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 0.245944] PCI: CLS 64 bytes, default 64
[ 0.245971] Unpacking initramfs...
[ 0.297147] Freeing initrd memory: 4348K (ffff880037772000 - ffff880037bb1000)
[ 0.297165] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.297166] software IO TLB [mem 0xc4fcf000-0xc8fcf000] (64MB) mapped at [ffff8800c4fcf000-ffff8800c8fcefff]
[ 0.297279] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.297305] Scanning for low memory corruption every 60 seconds
[ 0.297474] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.307365] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.308202] zbud: loaded
[ 0.308310] VFS: Disk quotas dquot_6.5.2
[ 0.308329] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.308394] msgmni has been set to 15749
[ 0.308421] Key type big_key registered
[ 0.308524] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.308559] io scheduler noop registered
[ 0.308561] io scheduler deadline registered
[ 0.308589] io scheduler cfq registered (default)
[ 0.308711] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 0.308910] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.308920] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.308938] vesafb: mode is 1366x768x32, linelength=5632, pages=0
[ 0.308939] vesafb: scrolling: redraw
[ 0.308940] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.308951] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 4224k, total 4224k
[ 0.350451] Console: switching to colour frame buffer device 170x48
[ 0.391803] fb0: VESA VGA frame buffer device
[ 0.391811] intel_idle: MWAIT substates: 0x1120
[ 0.391812] intel_idle: v0.4 model 0x3A
[ 0.391812] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.391916] GHES: HEST is not enabled!
[ 0.391950] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.412492] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.412763] Linux agpgart interface v0.103
[ 0.412791] rtc_cmos 00:05: RTC can wake from S4
[ 0.412895] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.412921] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.412927] Intel P-state driver initializing.
[ 0.412937] Intel pstate controlling: cpu 0
[ 0.412950] Intel pstate controlling: cpu 1
[ 0.412959] Intel pstate controlling: cpu 2
[ 0.412996] Intel pstate controlling: cpu 3
[ 0.413032] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.413152] TCP: cubic registered
[ 0.413269] NET: Registered protocol family 10
[ 0.413508] NET: Registered protocol family 17
[ 0.413917] registered taskstats version 1
[ 0.414415] Magic number: 10:384:80
[ 0.414512] rtc_cmos 00:05: setting system clock to 2014-08-05 14:04:30 UTC (1407247470)
[ 0.414604] PM: Hibernation image not present or could not be loaded.
[ 0.415570] Freeing unused kernel memory: 1116K (ffffffff818df000 - ffffffff819f6000)
[ 0.415572] Write protecting the kernel read-only data: 8192k
[ 0.418429] Freeing unused kernel memory: 908K (ffff88000151d000 - ffff880001600000)
[ 0.419683] Freeing unused kernel memory: 404K (ffff88000179b000 - ffff880001800000)
[ 0.425699] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.426625] systemd-udevd[58]: starting version 215
[ 0.434065] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.436383] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.436406] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.438395] ACPI: bus type USB registered
[ 0.438416] usbcore: registered new interface driver usbfs
[ 0.438422] usbcore: registered new interface driver hub
[ 0.438568] usbcore: registered new device driver usb
[ 0.438769] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.438940] ehci-pci: EHCI PCI platform driver
[ 0.439051] SCSI subsystem initialized
[ 0.439069] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.439073] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.439084] ehci-pci 0000:00:1a.0: debug port 2
[ 0.439951] libata version 3.00 loaded.
[ 0.442968] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.442981] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf7e17000
[ 0.452336] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.452456] hub 1-0:1.0: USB hub found
[ 0.452461] hub 1-0:1.0: 2 ports detected
[ 0.452625] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.452629] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.452639] ehci-pci 0000:00:1d.0: debug port 2
[ 0.456535] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.456538] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e16000
[ 0.465651] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.465817] hub 2-0:1.0: USB hub found
[ 0.465823] hub 2-0:1.0: 2 ports detected
[ 0.466005] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.466009] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.466085] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.466103] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 0.466251] hub 3-0:1.0: USB hub found
[ 0.466259] hub 3-0:1.0: 4 ports detected
[ 0.466483] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.466485] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.466628] hub 4-0:1.0: USB hub found
[ 0.466637] hub 4-0:1.0: 4 ports detected
[ 0.466870] ata_piix 0000:00:1f.2: version 2.13
[ 0.466965] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.619604] scsi0 : ata_piix
[ 0.619931] scsi1 : ata_piix
[ 0.620018] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[ 0.620024] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[ 0.620137] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.758810] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.772097] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.772607] scsi2 : ata_piix
[ 0.772883] scsi3 : ata_piix
[ 0.772956] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[ 0.772959] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[ 0.882597] hub 1-1:1.0: USB hub found
[ 0.882674] hub 1-1:1.0: 6 ports detected
[ 0.988607] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.112512] hub 2-1:1.0: USB hub found
[ 1.112572] hub 2-1:1.0: 8 ports detected
[ 1.298309] tsc: Refined TSC clocksource calibration: 3398.999 MHz
[ 1.378364] usb 2-1.5: new low-speed USB device number 3 using ehci-pci
[ 1.408258] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 1.408273] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[ 1.421849] ata1.00: ATA-9: OCZ-AGILITY4, 1.4.1.3, max UDMA/133
[ 1.421853] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.421859] ata1.01: ATAPI: Optiarc DVD RW AD-5280S, 1.01, max UDMA/100
[ 1.428508] ata1.00: configured for UDMA/133
[ 1.441760] ata1.01: configured for UDMA/100
[ 1.442679] scsi 0:0:0:0: Direct-Access ATA OCZ-AGILITY4 1.4. PQ: 0 ANSI: 5
[ 1.443880] scsi 0:0:1:0: CD-ROM Optiarc DVD RW AD-5280S 1.01 PQ: 0 ANSI: 5
[ 1.467612] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.470021] usbcore: registered new interface driver usbhid
[ 1.470024] usbhid: USB HID core driver
[ 1.470596] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:046D:C05B.0001/input/input2
[ 1.470731] hid-generic 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.5/input0
[ 1.531632] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[ 1.623566] input: DELL Dell QuietKey Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:413C:2106.0002/input/input3
[ 1.623692] hid-generic 0003:413C:2106.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell QuietKey Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 1.967693] ata2.01: failed to resume link (SControl 30)
[ 2.120931] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 2.120945] ata2.01: SATA link down (SStatus 4 SControl 30)
[ 2.128110] ata2.00: ATA-8: ST1500DL003-9VT16L, CC4A, max UDMA/133
[ 2.128114] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.141440] ata2.00: configured for UDMA/133
[ 2.141636] scsi 1:0:0:0: Direct-Access ATA ST1500DL003-9VT1 CC4A PQ: 0 ANSI: 5
[ 2.153040] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 2.153044] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.153124] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.153280] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 2.153296] sd 0:0:0:0: [sda] Write Protect is off
[ 2.153301] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.153326] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.153429] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.153432] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.153528] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.153531] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.153639] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.175762] sda: sda1 sda2
[ 2.190742] sdb: sdb1
[ 2.191322] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.191353] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.297544] Switched to clocksource tsc
[ 2.521461] device-mapper: uevent: version 1.0.3
[ 2.521594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 3.194646] random: nonblocking pool is initialized
[ 3.442872] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.687624] systemd[1]: Configuration file /etc/systemd/system/netctl@ethernet\x2ddhcp.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 3.691036] systemd[1]: [/etc/systemd/system/vncserver@:1.service:1] Assignment outside of section. Ignoring.
[ 3.786773] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 3.846387] systemd-udevd[195]: starting version 215
[ 3.955208] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.955211] ACPI: Power Button [PWRB]
[ 3.955251] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.955252] ACPI: Power Button [PWRF]
[ 3.971958] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 3.972032] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 3.972035] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 3.972053] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 3.982591] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[ 3.982615] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 3.982636] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 3.982656] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 3.982676] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.982697] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 3.983309] wmi: Mapper loaded
[ 3.983960] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 4.016049] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258)
[ 4.016054] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.016101] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.022693] [drm] Initialized drm 1.1.0 20060810
[ 4.032772] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 4.032996] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.032998] ACPI: Thermal Zone [TZ00] (28 C)
[ 4.033145] acpi device:46: registered as cooling_device4
[ 4.033214] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12
[ 4.033243] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.033245] ACPI: Thermal Zone [TZ01] (30 C)
[ 4.033309] ACPI: Fan [FAN0] (off)
[ 4.033333] ACPI: Fan [FAN1] (off)
[ 4.033354] ACPI: Fan [FAN2] (off)
[ 4.033375] ACPI: Fan [FAN3] (off)
[ 4.033398] ACPI: Fan [FAN4] (off)
[ 4.037199] sound hdaudioC0D0: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[ 4.037202] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.037203] sound hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 4.037204] sound hdaudioC0D0: mono: mono_out=0x0
[ 4.037205] sound hdaudioC0D0: dig-out=0x20/0x21
[ 4.037205] sound hdaudioC0D0: inputs:
[ 4.037207] sound hdaudioC0D0: Rear Mic=0x1a
[ 4.037208] sound hdaudioC0D0: Front Mic=0x1e
[ 4.037209] sound hdaudioC0D0: Line=0x1b
[ 4.045615] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 4.045640] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 4.045658] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 4.045676] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 4.045694] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 4.045711] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 4.045728] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 4.045747] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 4.045764] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[ 4.045781] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[ 4.084103] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0xa
[ 4.101114] [drm] Memory usable by graphics device = 2048M
[ 4.101117] checking generic (e0000000 420000) vs hw (d0000000 10000000)
[ 4.101753] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0xa
[ 4.101765] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0xa
[ 4.101773] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0xa
[ 4.101803] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 4.117554] input: PC Speaker as /devices/platform/pcspkr/input/input23
[ 4.119413] mousedev: PS/2 mouse device common for all mice
[ 4.122449] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 4.122456] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.122457] [drm] Driver supports precise vblank timestamp query.
[ 4.122795] iTCO_vendor_support: vendor-support=0
[ 4.123419] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.123440] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.123499] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.132527] [drm] Wrong MCH_SSKPD value: 0x20100406
[ 4.132529] [drm] This can cause pipe underruns and display issues.
[ 4.132529] [drm] Please upgrade your BIOS to fix this.
[ 4.146676] i915 0000:00:02.0: No connectors reported connected with modes
[ 4.146679] [drm] Cannot find any crtc or sizes - going 1024x768
[ 4.147000] checking generic (e0000000 420000) vs hw (d0000000 10000000)
[ 4.147051] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device
[ 4.147052] i915 0000:00:02.0: registered panic notifier
[ 4.147063] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 4.153004] AVX version of gcm_enc/dec engaged.
[ 4.153783] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [c8:60:00:98:ce:45]
[ 4.163501] asus_wmi: ASUS WMI generic driver loaded
[ 4.165770] asus_wmi: Initialization: 0x0
[ 4.165783] asus_wmi: BIOS WMI version: 0.9
[ 4.165823] asus_wmi: SFUN value: 0x0
[ 4.166095] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input25
[ 4.168099] asus_wmi: Backlight controlled by ACPI video driver
[ 4.170681] kvm: disabled by bios
[ 4.179593] kvm: disabled by bios
[ 4.188390] [drm] radeon kernel modesetting enabled.
[ 4.188423] checking generic (e0000000 420000) vs hw (e0000000 10000000)
[ 4.188424] fb: switching to radeondrmfb from VESA VGA
[ 4.188437] Console: switching to colour dummy device 80x25
[ 4.188600] [drm] initializing kernel modesetting (VERDE 0x1002:0x683D 0x1462:0x2710).
[ 4.188609] [drm] register mmio base: 0xF7D00000
[ 4.188609] [drm] register mmio size: 262144
[ 4.188651] ATOM BIOS: 113
[ 4.188769] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 4.188770] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 4.188771] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 4.188772] [drm] RAM width 128bits DDR
[ 4.188797] [TTM] Zone kernel: Available graphics memory: 4033182 kiB
[ 4.188798] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 4.188799] [TTM] Initializing pool allocator
[ 4.188802] [TTM] Initializing DMA pool allocator
[ 4.188814] [drm] radeon: 1024M of VRAM memory ready
[ 4.188815] [drm] radeon: 1024M of GTT memory ready.
[ 4.188823] [drm] Loading VERDE Microcode
[ 4.192707] systemd-udevd[202]: renamed network interface eth0 to enp3s0
[ 4.226833] [drm] radeon/VERDE_mc2.bin: 31500 bytes
[ 4.228027] [drm] Internal thermal controller with fan control
[ 4.228070] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e
[ 4.234178] [drm] radeon: dpm initialized
[ 4.235973] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 4.236543] [drm] probing gen 2 caps for device 8086:151 = 261ad03/e
[ 4.236546] [drm] PCIE gen 3 link speeds already enabled
[ 4.246119] [drm] PCIE GART of 1024M enabled (table at 0x0000000000276000).
[ 4.246215] radeon 0000:01:00.0: WB enabled
[ 4.246217] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff88021f6f1c00
[ 4.246219] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff88021f6f1c04
[ 4.246220] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff88021f6f1c08
[ 4.246221] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff88021f6f1c0c
[ 4.246222] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff88021f6f1c10
[ 4.246703] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc900192b5a18
[ 4.246704] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.246705] [drm] Driver supports precise vblank timestamp query.
[ 4.246720] radeon 0000:01:00.0: irq 48 for MSI/MSI-X
[ 4.246728] radeon 0000:01:00.0: radeon: using MSI.
[ 4.246746] [drm] radeon: irq initialized.
[ 4.704412] [drm] ring test on 0 succeeded in 2 usecs
[ 4.704417] [drm] ring test on 1 succeeded in 1 usecs
[ 4.704420] [drm] ring test on 2 succeeded in 1 usecs
[ 4.704483] [drm] ring test on 3 succeeded in 4 usecs
[ 4.704488] [drm] ring test on 4 succeeded in 1 usecs
[ 4.892271] [drm] ring test on 5 succeeded in 2 usecs
[ 4.892276] [drm] UVD initialized successfully.
[ 4.892454] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.892510] [drm] ib test on ring 1 succeeded in 0 usecs
[ 4.892562] [drm] ib test on ring 2 succeeded in 0 usecs
[ 4.892627] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.892703] [drm] ib test on ring 4 succeeded in 1 usecs
[ 5.045155] [drm] ib test on ring 5 succeeded
[ 5.045348] [drm] Radeon Display Connectors
[ 5.045349] [drm] Connector 0:
[ 5.045350] [drm] DP-4
[ 5.045351] [drm] HPD4
[ 5.045352] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c
[ 5.045352] [drm] Encoders:
[ 5.045353] [drm] DFP1: INTERNAL_UNIPHY2
[ 5.045353] [drm] Connector 1:
[ 5.045354] [drm] HDMI-A-4
[ 5.045355] [drm] HPD1
[ 5.045355] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 5.045356] [drm] Encoders:
[ 5.045356] [drm] DFP2: INTERNAL_UNIPHY2
[ 5.045357] [drm] Connector 2:
[ 5.045358] [drm] DVI-I-1
[ 5.045358] [drm] HPD2
[ 5.045359] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 5.045359] [drm] Encoders:
[ 5.045360] [drm] DFP3: INTERNAL_UNIPHY
[ 5.045361] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.073351] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 5.092640] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 5.108315] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 5.117016] [drm] fb mappable at 0xE0479000
[ 5.117017] [drm] vram apper at 0xE0000000
[ 5.117018] [drm] size 4325376
[ 5.117019] [drm] fb depth is 24
[ 5.117019] [drm] pitch is 5632
[ 5.117106] fbcon: radeondrmfb (fb0) is primary device
[ 5.149170] Console: switching to colour frame buffer device 170x48
[ 5.150711] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 5.150750] [drm] Initialized radeon 2.38.0 20080528 for 0000:01:00.0 on minor 1
[ 5.335178] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 5.341840] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 5.345398] systemd-journald[174]: Received request to flush runtime journal from PID 1
[ 5.384082] systemd-journald[174]: File /var/log/journal/3ceb5e0931f846a88e9868dfe8919c31/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 5.571040] alx 0000:03:00.0: irq 49 for MSI/MSI-X
[ 5.571201] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 10.650843] alx 0000:03:00.0: irq 49 for MSI/MSI-X
[ 10.650985] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 15.592516] alx 0000:03:00.0 enp3s0: NIC Up: 100 Mbps Full
[ 15.592732] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes readyIs this the log of a failed boot or of a successful one? If it is a successful one, please provide the log of a failed boot. This log seems to say that there are 3 displays detected, so I think this is a normal boot.
What I would like to see is if the failed boot starts X or not. That is, assuming you use X. When the boot fails, do you see messages on your screen before it goes black? -
How to debug a program when it is SUBMITed from another program
Hi All,
Now one more query. While SUBMITing a Z program1 from Z program2, I want to debug the Z program1. Even when I keep a break point in Z program1, it is not triggering there. Any help would be appreciated.
Regards,
BalajiHi all,
Please find the full code. I want to debug the sub routine PERFORM send_mail.
1. The main program.
REPORT Z_ITSLIP_MAIL .
TABLES : pa0000, pa0001. .
SELECT-OPTIONS : pernr FOR pa0000-pernr NO INTERVALS.
DATA : count LIKE tbtcjob-jobcount.
DATA : released LIKE btch0000-char1.
DATA:
l_valid,
ls_params LIKE pri_params,
l_jobcount LIKE tbtcjob-jobcount.
PARAMETERS: p_job TYPE tbtcjob-jobname NO-DISPLAY.
PARAMETERS: p_prog(30) TYPE c NO-DISPLAY..
PARAMETERS: p_sdat LIKE sy-datum DEFAULT sy-datum .
PARAMETERS: p_stim TYPE sy-uzeit DEFAULT sy-uzeit .
PARAMETERS : payroll LIKE qppnp-xabkr OBLIGATORY.
*PARAMETERS : period LIKE qppnp-pabrp OBLIGATORY.
*PARAMETERS : year LIKE qppnp-pabrj OBLIGATORY.
select-options : Period for sy-datum.
DATA : BEGIN OF it_p0001 OCCURS 0,
pernr LIKE pa0001-pernr,
END OF it_p0001.
p_sdat = p_sdat + 1.
*Get Print Parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
no_dialog = 'X'
IMPORTING
valid = l_valid
out_parameters = ls_params.
IF pernr[] IS INITIAL.
SELECT pernr
INTO TABLE it_p0001
FROM pa0001.
SORT it_p0001 BY pernr.
DELETE ADJACENT DUPLICATES FROM it_p0001.
LOOP AT it_p0001.
MOVE it_p0001-pernr TO pernr-low.
APPEND pernr.
CLEAR pernr.
ENDLOOP.
ENDIF.
LOOP AT pernr.
CLEAR p_job.
p_stim = p_stim + 120.
CONCATENATE'ITSlip' pernr-low p_job sy-datum INTO p_job SEPARATED BY
space.
CALL FUNCTION 'JOB_OPEN'
EXPORTING
jobname = p_job
IMPORTING
jobcount = l_jobcount.
SUBMIT ZPR022_INNCOMETAX_REPORT_copy
WITH PNPTIMR6 = 'X'
WITH PNPBEGDA = period-low
WITH PNPENDDA = period-high
WITH PNPPERNR-LOW = PERNR-LOW
WITH PNPABKRS-LOW = 'IN'
VIA JOB p_job
NUMBER l_jobcount
TO SAP-SPOOL WITHOUT SPOOL DYNPRO
SPOOL PARAMETERS ls_params
WITH immediately = space
AND RETURN.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
jobcount = l_jobcount
jobname = p_job
strtimmed = 'X'
PRDMINS = 2.
sdlstrtdt = p_sdat
sdlstrttm = p_stim.
ENDLOOP.
2. The called program.
REPORT zpr022_inncometax_report_copy NO STANDARD PAGE HEADING LINE-SIZE
89.
TABLES : pernr, t512e, t512t,pa0105.
Infotypes
INFOTYPES : 0000, 0001, 0008, 0580.
Types Begin with TY_
DATA : BEGIN OF wa_lgart,
lgart TYPE t512e-lgart,
windo TYPE t512e-windo,
slart TYPE t512e-slart,
lgtxt TYPE t512t-lgtxt,
kztxt TYPE t512t-kztxt,
END OF wa_lgart.
DATA : BEGIN OF wa_income,
particular(24) TYPE c,
lgart TYPE lgart,
cumm(13) TYPE p DECIMALS 2,
proj(13) TYPE p DECIMALS 2,
exem(13) TYPE p DECIMALS 2,
annu(13) TYPE p DECIMALS 2,
END OF wa_income.
DATA : BEGIN OF wa_income1,
particular(24) TYPE c,
lgart TYPE lgart,
cumm(13) TYPE c,
proj(13) TYPE c,
exem(13) TYPE c,
annu(13) TYPE c,
END OF wa_income1.
DATA : BEGIN OF wa_invest,
particular(40) TYPE c,
betrg(13) TYPE p DECIMALS 2,
END OF wa_invest.
DATA : BEGIN OF wa_invest1,
particular(40) TYPE c,
betrg(13) TYPE c,
END OF wa_invest1.
DATA : BEGIN OF wa_deduct,
particular(40) TYPE c,
sbs TYPE pin_sbsec,
betrg(13) TYPE p DECIMALS 2,
END OF wa_deduct.
DATA : BEGIN OF wa_deduct1,
particular(40) TYPE c,
sbs TYPE c,
betrg(13) TYPE c,
END OF wa_deduct1.
DATA: BEGIN OF cocd OCCURS 10.
INCLUDE STRUCTURE pincc.
DATA: END OF cocd.
DATA: BEGIN OF f16 OCCURS 10.
INCLUDE STRUCTURE pin16.
DATA: END OF f16.
Constants Begin with C_
Data Begin with W_
DATA : w_clstrid TYPE t500l-relid, "Cluster ID
w_molga TYPE t500p-molga, "Country Code
w_period(6) TYPE c,
w_var(2) TYPE n,
w_pr_from1 TYPE t569v-pabrj, "year
w_pr_to1 TYPE t569v-pabrp, "period
w_fpper-low1 TYPE pc261-fpper,
w_year(4) TYPE n,
w_ltaexe(13) TYPE p DECIMALS 2,
w_cumm(13) TYPE p DECIMALS 2,
w_lgtxt(20) TYPE c,
w_lgart TYPE lgart,
w_amount(13) TYPE p DECIMALS 2,
w_wage(4) TYPE c,
w_flag(1) TYPE c,
w_total(13) TYPE p DECIMALS 2,
w_start TYPE sy-datum,
w_end TYPE sy-datum,
w_date TYPE sy-datum,
w_index(2) TYPE n VALUE 00,
w_investnm(40),
w_investnm1(40),
w_ded0585(13) TYPE p DECIMALS 2,
w_itext TYPE t7ini3-itext,
w_dtext TYPE t7ini8-sbdds,
w_inprvemp(13) TYPE p DECIMALS 2,
w_nettaxin(13) TYPE p DECIMALS 2,
w_ptaxprvemp(13) TYPE p DECIMALS 2,
w_ptaxcremp(13) TYPE p DECIMALS 2,
w_othtaxin(13) TYPE p DECIMALS 2,
w_gssin(13) TYPE p DECIMALS 2,
w_dedtot(13) TYPE p DECIMALS 2,
w_invtot(13) TYPE p DECIMALS 2,
w_inchrtax(13) TYPE p DECIMALS 2,
w_nettaxpay(13) TYPE p DECIMALS 2,
w_surchr(13) TYPE p DECIMALS 2,
w_cess(13) TYPE p DECIMALS 2,
w_totintax(13) TYPE p DECIMALS 2,
w_tdsothin(13) TYPE p DECIMALS 2,
w_cessrec(13) TYPE p DECIMALS 2,
w_prvemp(13) TYPE p DECIMALS 2,
w_tottaxpay(13) TYPE p DECIMALS 2,
w_var1(13) TYPE p DECIMALS 2,
w_var2(13) TYPE p DECIMALS 2,
w_balit(13) TYPE p DECIMALS 2,
w_avgmon(13) TYPE p DECIMALS 2,
w_remmon(2) TYPE n,
w_profund(13) TYPE p DECIMALS 2,
w_pf(13) TYPE p DECIMALS 2,
w_dept(25) TYPE c,
w_desig(25) TYPE c,
w_join TYPE sy-datum,
w_annperk(13) TYPE p DECIMALS 2,
w_percent TYPE pin_txexm,
w_limit TYPE pin_sdvlt,
w_st0008 TYPE sy-datum,
w_en0008 TYPE sy-datum.
DATA: w_cmonth(2) TYPE n,
w_cyear(4) TYPE n,
w_cdate LIKE sy-datum,
w_ldate LIKE sy-datum.
Internal tables Begin with IT_
DATA : it_0001 TYPE STANDARD TABLE OF pa0001,
it_data TYPE STANDARD TABLE OF pa0001,
it_0000 TYPE STANDARD TABLE OF pa0000,
it_lgart LIKE STANDARD TABLE OF wa_lgart,
it_pc261 TYPE STANDARD TABLE OF pc261,
it_payrt_result TYPE payin_result,
it_income LIKE STANDARD TABLE OF wa_income,
it_income1 LIKE STANDARD TABLE OF wa_income1,
it_wage LIKE it_income,
it_invest LIKE STANDARD TABLE OF wa_invest,
it_invest1 LIKE STANDARD TABLE OF wa_invest1,
it_deduct LIKE STANDARD TABLE OF wa_deduct,
it_deduct1 LIKE STANDARD TABLE OF wa_deduct1,
it_0586 TYPE STANDARD TABLE OF pa0586,
it_0580 TYPE STANDARD TABLE OF pa0580,
it_0584 TYPE STANDARD TABLE OF pa0584,
it_0585 TYPE STANDARD TABLE OF pa0585,
it_t7ini3 TYPE STANDARD TABLE OF t7ini3,
it_info TYPE STANDARD TABLE OF zpt011_fep_pay,
it_0008 TYPE STANDARD TABLE OF pa0008,
it_rt TYPE STANDARD TABLE OF pbwla WITH HEADER LINE.
DATA : p_email1 LIKE somlreci1-receiver,
DEFAULT '[email protected]'
p_sender LIKE somlreci1-receiver.
DEFAULT '[email protected]',
*DATA DECLARATION
DATA: gd_recsize TYPE i.
data: date like sy-datum.
Spool IDs
TYPES: BEGIN OF t_tbtcp.
INCLUDE STRUCTURE tbtcp.
TYPES: END OF t_tbtcp.
DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
wa_tbtcp TYPE t_tbtcp.
Job Runtime Parameters
DATA: gd_eventid LIKE tbtcm-eventid,
gd_eventparm LIKE tbtcm-eventparm,
gd_external_program_active LIKE tbtcm-xpgactive,
gd_jobcount LIKE tbtcm-jobcount,
gd_jobname LIKE tbtcm-jobname,
gd_stepcount LIKE tbtcm-stepcount,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
DATA: w_recsize TYPE i.
DATA: gd_subject LIKE sodocchgi1-obj_descr,
it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
gd_sender_type LIKE soextreci1-adr_typ,
gd_attachment_desc TYPE so_obj_nam,
gd_attachment_name TYPE so_obj_des.
Spool to PDF conversions
DATA: gd_spool_nr LIKE tsp01-rqident,
gd_destination LIKE rlgrap-filename,
gd_bytecount LIKE tst01-dsize,
gd_buffer TYPE string.
Binary store for PDF
DATA: BEGIN OF it_pdf_output OCCURS 0.
INCLUDE STRUCTURE tline.
DATA: END OF it_pdf_output.
CONSTANTS: c_dev LIKE sy-sysid VALUE 'DEV',
c_no(1) TYPE c VALUE ' ',
c_device(4) TYPE c VALUE 'LOCL'.
Work Area Begin with WA_
DATA : wa_0001 LIKE LINE OF it_0001,
wa_data LIKE LINE OF it_data,
wa_0000 LIKE LINE OF it_0000,
wa_pc261 LIKE LINE OF it_pc261,
wa_payrt_result TYPE LINE OF hrpay99_rt,
wa_paycrt_result TYPE LINE OF hrpay99_crt,
wa_0586 LIKE LINE OF it_0586,
wa_0580 LIKE LINE OF it_0580,
wa_0584 LIKE LINE OF it_0584,
wa_0585 LIKE LINE OF it_0585,
wa_t7ini3 LIKE LINE OF it_t7ini3,
wa_in LIKE LINE OF it_income,
wa_info LIKE LINE OF it_info,
wa_0008 LIKE LINE OF it_0008,
wa_wage LIKE wa_income,
wa_rt TYPE pbwla.
Field Symbols Begin with FS_
FIELD-SYMBOLS: <itc> TYPE ANY,
<ain> TYPE ANY,
<amt> TYPE ANY,
<sbdnn> TYPE ANY,
<tot> TYPE ANY.
Select Options Begin with SO_
*SELECT-OPTIONS :
Parameters Begin with PR_
*PARAMETERS :
Initialisation
INITIALIZATION.
date = sy-datum.
Selection-Screen
S T A R T O F S E L E C T I O N
START-OF-SELECTION.
GET pernr.
SELECT * FROM pa0001 INTO CORRESPONDING FIELDS OF TABLE it_0001
WHERE pernr IN pnppernr
AND abkrs IN pnpabkrs
AND bukrs IN pnpbukrs.
DELETE ADJACENT DUPLICATES FROM it_0001 COMPARING pernr.
SELECT * FROM pa0000 INTO CORRESPONDING FIELDS OF TABLE it_0000
WHERE pernr IN pnppernr.
SELECT t512e~lgart
t512e~slart
t512t~lgtxt
t512t~kztxt
INTO CORRESPONDING FIELDS OF TABLE it_lgart
FROM t512e INNER JOIN t512t ON
t512elgart = t512tlgart AND
t512emolga = t512tmolga
WHERE t512e~forml = 'ZPY2' AND
t512t~sprsl = sy-langu AND
t512e~molga = '40' AND
t512e~windo EQ 'W1' .
LOOP AT it_lgart INTO wa_lgart WHERE lgart+0(1) EQ '/'.
DELETE it_lgart.
ENDLOOP.
SORT it_lgart BY lgart.
**---Here we are getting the start and the End of the financial year...
CLEAR : w_date, w_start, w_end, w_year.
w_date = sy-datum.
**---Here we get the start date of the year.....
IF w_date+4(2) BETWEEN '01' AND '04'.
w_year = w_date+0(4).
w_year = w_year - 1.
CONCATENATE w_year '04' '01' INTO w_start.
ELSE.
CONCATENATE w_date+0(4) '04' '01' INTO w_start.
ENDIF.
**---Here we get the end date of the year......
CLEAR : w_year.
IF w_date+4(2) BETWEEN '01' AND '04'.
CONCATENATE w_date+0(4) '03' '31' INTO w_end.
ELSE.
w_year = w_date+0(4).
w_year = w_year + 1.
CONCATENATE w_year '03' '31' INTO w_end.
ENDIF.
CLEAR : w_year.
E N D O F S E L E C T I O N
END-OF-SELECTION.
**---perform for getting the Income tax Calculation part....
PERFORM f000_get_income.
PERFORM send_mail.
User Command Processing
*AT USER-COMMAND.
Top Of Page
TOP-OF-PAGE.
WRITE : / 'Mindtree Consulting Pvt Ltd',
/ 'No.42, 27th Cross',
/ '2nd Stage, Banashankari',
/ 'Bangalore - 560070'.
*& Form f000_get_income
text
-->P_IT_0001 text
-->P_IT_LGART text
FORM f000_get_income.
LOOP AT it_0001 INTO wa_0001.
CLEAR : wa_invest, wa_deduct, wa_income.
REFRESH : it_invest, it_deduct, it_income.
CONCATENATE pnppabrj pnppabrp INTO w_period.
**---Here we are getting the Earnings in India from RT Table...
**---Getting the relid for each employee....
CALL FUNCTION 'PYXX_GET_RELID_FROM_PERNR'
EXPORTING
employee = wa_0001-pernr
IMPORTING
relid = w_clstrid
molga = w_molga
EXCEPTIONS
error_reading_infotype_0001 = 1
error_reading_molga = 2
error_reading_relid = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
**---Reading the rgdir of cluster 'CU' for each of the employees...
CALL FUNCTION 'CU_READ_RGDIR'
EXPORTING
persnr = wa_0001-pernr
TABLES
in_rgdir = it_pc261
EXCEPTIONS
no_record_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_lgtxt, w_cumm, w_ltaexe, w_flag.
LOOP AT it_pc261 INTO wa_pc261 WHERE fpper = w_period
AND srtza = 'A'.
**---Importing the Payroll cluster results for each employee from RT....
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
clusterid = w_clstrid
employeenumber = wa_0001-pernr
sequencenumber = wa_pc261-seqnr
CHANGING
payroll_result = it_payrt_result
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
**---Processing....
LOOP AT it_lgart INTO wa_lgart.
CLEAR : wa_income.
IF wa_lgart-lgart NE '5004' AND
wa_lgart-lgart NE '5007' AND
wa_lgart-lgart NE '5008' AND
wa_lgart-lgart NE '5011' AND
wa_lgart-lgart NE '5012' AND
wa_lgart-lgart NE '5014' AND
wa_lgart-lgart NE '5017' AND
wa_lgart-lgart NE '5018' AND
wa_lgart-lgart NE '5027' AND
wa_lgart-lgart NE '5029' AND
wa_lgart-lgart NE '5031' AND
wa_lgart-lgart NE '5039' AND
wa_lgart-lgart NE '5060' AND
wa_lgart-lgart NE '7004' AND
wa_lgart-lgart NE '7007' AND
wa_lgart-lgart NE '7008' AND
wa_lgart-lgart NE '7011' AND
wa_lgart-lgart NE '7012' AND
wa_lgart-lgart NE '7014' AND
wa_lgart-lgart NE '7017' AND
wa_lgart-lgart NE '7018' AND
wa_lgart-lgart NE '7027' AND
wa_lgart-lgart NE '7029' AND
wa_lgart-lgart NE '7031' AND
wa_lgart-lgart NE '7039' AND
wa_lgart-lgart NE '7060'.
LOOP AT it_payrt_result-inter-crt INTO wa_paycrt_result
WHERE cumty = 'Y' AND lgart EQ wa_lgart-lgart.
IF wa_lgart-lgart+0(1) = '7'.
LOOP AT it_payrt_result-inter-crt INTO wa_paycrt_result
WHERE cumty = 'M' AND lgart EQ wa_lgart-lgart.
READ TABLE it_payrt_result-inter-rt INTO
wa_payrt_result WITH
KEY lgart = wa_lgart-lgart.
IF sy-subrc = 0.
wa_income-particular = wa_lgart-lgtxt.
wa_income-lgart = wa_paycrt_result-lgart.
wa_income-cumm = wa_paycrt_result-betrg.
ENDIF.
ENDLOOP.
ELSE.
wa_income-particular = wa_lgart-lgtxt.
wa_income-lgart = wa_paycrt_result-lgart.
wa_income-cumm = wa_paycrt_result-betrg.
ENDIF.
ENDLOOP.
REFRESH : it_0008.
CLEAR : wa_0008.
PERFORM f010_get_date USING pnppabrp pnppabrj.
CALL FUNCTION 'SG_PS_GET_LAST_DAY_OF_MONTH'
EXPORTING
day_in = w_cdate
IMPORTING
last_day_of_month = w_ldate
EXCEPTIONS
day_in_not_valid = 1
OTHERS = 2.
SELECT * FROM pa0008 INTO CORRESPONDING FIELDS OF TABLE
it_0008 WHERE pernr = wa_0001-pernr
AND begda <= w_cdate
AND endda >= w_ldate.
IF it_0008 IS INITIAL.
SELECT * FROM pa0008 INTO CORRESPONDING FIELDS OF TABLE
it_0008 WHERE pernr = wa_0001-pernr
AND begda BETWEEN w_cdate AND w_ldate.
IF it_0008 IS INITIAL.
SELECT * FROM pa0008 INTO CORRESPONDING FIELDS OF TABLE
it_0008 WHERE pernr = wa_0001-pernr
AND begda = w_cdate.
ENDIF.
ENDIF.
CLEAR : w_st0008, w_en0008.
LOOP AT it_0008 INTO wa_0008.
w_st0008 = wa_0008-begda.
w_en0008 = wa_0008-endda.
EXIT.
ENDLOOP.
CLEAR : wa_rt.
REFRESH : it_rt.
CALL FUNCTION 'RP_FILL_WAGE_TYPE_TABLE'
EXPORTING
begda = w_st0008
endda = w_en0008
infty = '0008'
pernr = wa_0001-pernr
TABLES
ppbwla = it_rt
EXCEPTIONS
error_at_indirect_evaluation = 1
OTHERS = 2.
LOOP AT it_rt INTO wa_rt.
CLEAR : w_var.
IF wa_rt-lgart = '5000' AND "Basic
wa_lgart-lgart = '5000'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_rt-betrg * w_var.
wa_income-lgart = wa_rt-lgart.
**---Here we are checking for the arrers of Basic to deduct from the
*cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7000'.
IF sy-subrc = 0.
wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
ENDIF.
IF wa_rt-lgart = '5001' AND "HRA
wa_lgart-lgart = '5001'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_rt-betrg * w_var.
wa_income-lgart = wa_rt-lgart.
**---Here we are checking for the arrers of HRA to deduct from the
*cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7001'.
IF sy-subrc = 0.
wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
ENDIF.
IF wa_rt-lgart = '5003' AND "Conveyance
wa_lgart-lgart = '5003'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_rt-betrg * w_var.
wa_income-lgart = wa_rt-lgart.
**---Here we are checking for the arrers of Conveyance to deduct from
*the cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7003'.
IF sy-subrc = 0.
wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
ENDIF.
IF wa_rt-lgart = '5005' AND "Special Pay
wa_lgart-lgart = '5005'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_rt-betrg * w_var.
wa_income-lgart = wa_rt-lgart.
**---Here we are checking for the arrers of Special pay to deduct from
*the cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7005'.
IF sy-subrc = 0.
wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
ENDIF.
IF wa_rt-lgart = '5002' AND "CLA
wa_lgart-lgart = '5002'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_rt-betrg * w_var.
wa_income-lgart = wa_rt-lgart.
**---Here we are checking for the arrers of CLA to deduct from the
*cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7002'.
IF sy-subrc = 0.
wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT it_payrt_result-inter-rt INTO wa_payrt_result
WHERE lgart = wa_lgart-lgart.
CLEAR : w_var.
IF wa_payrt_result-lgart = '5000' AND "Basic
wa_lgart-lgart = '5000'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_payrt_result-betrg * w_var.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
***---Here we are checking for the arrers of Basic to deduct from the
*cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7000'.
IF sy-subrc = 0.
*wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
IF wa_payrt_result-lgart = '5001' AND "HRA
wa_lgart-lgart = '5001'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_payrt_result-betrg * w_var.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
***---Here we are checking for the arrers of HRA to deduct from the
*cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7001'.
IF sy-subrc = 0.
*wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
IF wa_payrt_result-lgart = '5003' AND "Conveyance
wa_lgart-lgart = '5003'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_payrt_result-betrg * w_var.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
***---Here we are checking for the arrers of Conveyance to deduct from
*the cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7003'.
IF sy-subrc = 0.
*wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
IF wa_payrt_result-lgart = '5005' AND "Special Pay
wa_lgart-lgart = '5005'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_payrt_result-betrg * w_var.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
***---Here we are checking for the arrers of Special pay to deduct from
*the cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7005'.
IF sy-subrc = 0.
*wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
IF wa_payrt_result-lgart = '5002' AND "CLA
wa_lgart-lgart = '5002'.
w_var = 12 - pnppabrp.
wa_income-proj = wa_payrt_result-betrg * w_var.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
***---Here we are checking for the arrers of CLA to deduct from the
*cummulation amount...
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '7002'.
IF sy-subrc = 0.
*wa_income-cumm = wa_income-cumm - wa_payrt_result-betrg.
ENDIF.
ENDLOOP.
IF wa_lgart-lgart = '5065'.
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '5065'.
IF sy-subrc = 0.
wa_income-particular = wa_lgart-lgtxt.
wa_income-lgart = wa_lgart-lgart.
wa_income-cumm = wa_payrt_result-betrg.
wa_income-proj = 0.
ENDIF.
ENDIF.
CLEAR : wa_payrt_result.
IF wa_lgart-lgart = '5001'.
"HRA Exemptions
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '/4E4'.
IF sy-subrc = 0.
wa_income-exem = wa_payrt_result-betrg.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
ENDIF.
CLEAR : wa_payrt_result.
IF wa_lgart-lgart = '5003'.
"Conveyance Exemptions
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '/4E3'.
IF sy-subrc = 0.
wa_income-exem = wa_payrt_result-betrg.
wa_income-lgart = wa_payrt_result-lgart.
ENDIF.
ENDIF.
CLEAR : wa_payrt_result.
IF wa_lgart-lgart = '5025'.
"Leave Encashment
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '/4E7'.
IF sy-subrc = 0.
wa_income-particular = wa_lgart-lgtxt.
wa_income-lgart = wa_payrt_result-lgart.
wa_income-cumm = wa_payrt_result-betrg.
wa_income-exem = wa_payrt_result-betrg.
ENDIF.
ENDIF.
**---Here we are calculating the annual field of the IT it_income....
wa_income-annu = ( wa_income-cumm + wa_income-proj ) -
wa_income-exem.
IF wa_income IS NOT INITIAL.
APPEND wa_income TO it_income.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
READ TABLE it_payrt_result-inter-rt INTO wa_payrt_result
WITH KEY lgart = '5038'.
IF sy-subrc EQ 0.
READ TABLE it_lgart INTO wa_lgart WITH KEY lgart = '5038'.
wa_wage-annu = wa_payrt_result-betrg.
wa_wage-particular = wa_lgart-lgtxt.
wa_wage-lgart = w_lgart.
wa_wage-cumm = wa_payrt_result-betrg.
APPEND wa_wage TO it_wage.
ENDIF.
**---Here we are looping the RGDIR internal table for the LTA Amount in
*Offcycle....
LOOP AT it_pc261 INTO wa_pc261 WHERE fpper = '000000'
AND srtza = 'A'.
IF w_flag IS INITIAL.
IF wa_pc261-fpbeg+4(2) = '01' OR
wa_pc261-fpbeg+4(2) = '02' OR
wa_pc261-fpbeg+4(2) = '03'.
w_year = wa_pc261-fpbeg+0(4) - 1.
w_pr_from1 = w_year.
ELSE.
w_pr_from1 = wa_pc261-fpbeg+0(4).
ENDIF.
IF wa_pc261-fpbeg+4(2) EQ '01'.
w_pr_to1 = '10'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '02'.
w_pr_to1 = '11'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '03'.
w_pr_to1 = '12'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '04'.
w_pr_to1 = '01'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '05'.
w_pr_to1 = '02'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '06'.
w_pr_to1 = '03'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '07'.
w_pr_to1 = '04'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '08'.
w_pr_to1 = '05'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '09'.
w_pr_to1 = '06'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '10'.
w_pr_to1 = '07'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '11'.
w_pr_to1 = '08'.
ELSEIF wa_pc261-fpbeg+4(2) EQ '12'.
w_pr_to1 = '09'.
ENDIF.
CONCATENATE w_pr_from1 w_pr_to1 INTO w_fpper-low1.
IF w_period = w_fpper-low1.
w_flag = 'X'.
CLEAR : wa_payrt_result.
**---Importing the Payroll cluster results for each employee from RT....
CALL FUNCTION 'PYXX_READ_PAYROLL_RESULT'
EXPORTING
clusterid = w_clstrid
employeenumber = wa_0001-pernr
sequencenumber = wa_pc261-seqnr
CHANGING
payroll_result = it_payrt_result
EXCEPTIONS
illegal_isocode_or_clusterid = 1
error_generating_import = 2
import_mismatch_error = 3
subpool_dir_full = 4
no_read_authority = 5
no_record_found = 6
versions_do_not_match = 7
error_reading_archive = 8
error_reading_relid = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_lgart INTO wa_lgart WHERE lgart = '5039'.
"LTA
LOOP AT it_payrt_result-inter-crt INTO wa_paycrt_result
WHERE lgart = '5039' AND cumty = 'C'.
w_lgtxt = wa_lgart-lgtxt.
w_lgart = wa_paycrt_result-betrg.
w_cumm = wa_paycrt_result-betrg.
ENDLOOP.
ENDLOOP.
ENDIF.
ENDIF.
ENDLOOP.
**---Here we are looping through the RT table to get the LTA Exemptions
*Amount....
LOOP AT it_payrt_result-inter-rt INTO wa_payrt_result
WHERE lgart = '/4E5'. "LTA Exemptions
w_ltaexe = wa_payrt_result-betrg.
wa_income-particular = w_lgtxt.
wa_income-lgart = w_lgart.
wa_income-cumm = w_cumm.
wa_income-exem = w_ltaexe.
ENDLOOP.
**---Here we are deducting the arrears amount from the original wagetype
*of the
**---arrear and then calculating the total of the annual column....
CLEAR : wa_income.
LOOP AT it_income INTO wa_income.
CLEAR : w_wage.
IF wa_income-lgart+0(1) = '5'.
CONCATENATE '7' wa_income-lgart+1(3) INTO w_wage.
READ TABLE it_income INTO wa_in WITH KEY lgart = w_wage.
IF sy-subrc = 0.
CLEAR : w_amount.
w_amount = wa_in-annu.
wa_income-annu = wa_income-annu - w_amount.
MODIFY it_income FROM wa_income TRANSPORTING annu.
ENDIF.
ENDIF.
ENDLOOP.
APPEND LINES OF it_wage TO it_income.
**---perform to get the data of the Investments of the employee...
PERFORM f00_investmants USING wa_0001.
LOOP AT it_income INTO wa_income.
READ TABLE it_0000 INTO wa_0000 WITH KEY pernr = wa_0001-pernr
massn = 'GO'.
IF sy-subrc EQ 0 AND wa_0000-begda0(6) = w_cdate0(6).
CLEAR wa_income-proj.
wa_income-annu = wa_income-cumm - wa_income-exem.
MODIFY it_income FROM wa_income.
ENDIF.
ENDLOOP.
LOOP AT it_income INTO wa_income.
READ TABLE it_0000 INTO wa_0000 WITH KEY pernr = wa_0001-pernr
massn = 'FF'.
IF sy-subrc EQ 0 AND wa_0000-begda0(6) = w_cdate0(6).
CLEAR wa_income-proj.
wa_income-annu = wa_income-cumm - wa_income-exem.
MODIFY it_income FROM wa_income.
ENDIF.
ENDLOOP.
**---Perform to reach to the Income chargable to Tax of the Employee....
PERFORM f001_chargeable_income USING wa_0001.
**---perform to display the data in IT form.....
PERFORM f00_output_data TABLES it_income it_deduct it_invest
USING wa_0001.
ENDLOOP.
ENDFORM. " f000_get_income
*& Form f00_output_data
text
-->P_IT_INCOME text
-->P_WA_0001 text
FORM f00_output_data TABLES p_it_income STRUCTURE wa_income
p_it_deduct STRUCTURE wa_deduct
p_it_invest STRUCTURE wa_invest
USING p_wa_0001 TYPE pa0001.
CLEAR : w_dept, w_desig, w_join.
rp-provide-from-last p0001 space '18000101' '99991231'.
rp-provide-from-frst p0000 space '18000101' '99991231'.
w_join = p0000-begda.
SELECT SINGLE plstx FROM t528t INTO w_desig
WHERE sprsl = 'E'
AND plans = p0001-plans.
SELECT SINGLE orgtx FROM t527x INTO w_dept
WHERE sprsl = 'E'
AND orgeh = p0001-orgeh.
WRITE : /.
WRITE : / 'EMPLOYEE NUMBER :',
p_wa_0001-pernr.
WRITE AT 35 'EMPLOYEE NAME :'.
WRITE : p_wa_0001-ename.
WRITE : / 'DEPARTMENT :',
w_dept.
WRITE AT 35 'DESIGNATION :'.
WRITE : w_desig.
WRITE : / 'DATE OF JOINING :',
w_join.
**---Here we are starting the output of the IT Report....
WRITE : /.
ULINE.
WRITE AT 28 'INCOME TAX CALCULATION'.
ULINE.
WRITE : /.
WRITE : / 'Particulars'.
WRITE AT 26 'Cummulative Total'.
WRITE AT 45 'Add:Projected'.
WRITE AT 61 'Less:Exempted'.
WRITE AT 77 'Annual. Rs.'.
WRITE : /.
LOOP AT p_it_income INTO wa_income.
CLEAR : wa_income1.
WRITE wa_income-particular TO wa_income1-particular.
WRITE wa_income-lgart RIGHT-JUSTIFIED TO wa_income1-lgart.
WRITE wa_income-cumm RIGHT-JUSTIFIED TO wa_income1-cumm.
WRITE wa_income-proj RIGHT-JUSTIFIED TO wa_income1-proj.
WRITE wa_income-exem RIGHT-JUSTIFIED TO wa_income1-exem.
WRITE wa_income-annu RIGHT-JUSTIFIED TO wa_income1-annu.
APPEND wa_income1 TO it_income1.
ENDLOOP.
LOOP AT it_income1 INTO wa_income1.
WRITE : / wa_income1-particular LEFT-JUSTIFIED UNDER 'Particulars',
wa_income1-cumm UNDER 'Cummulative Total',
wa_income1-proj UNDER 'Add:Projected',
wa_income1-exem UNDER 'Less:Exempted',
wa_income1-annu UNDER 'Annual. Rs.'.
w_total = w_total + wa_income-annu.
-
Multiple Senior Cluster Members?
Hi Guys,
We've had a few nodes kicked out of one of our production clusters all with messages similar to this:
ERROR 2008-04-21 18:17:05.753 Oracle Coherence GE 3.3.1/389p1 <Error> (thread=Cluster, member=29): Received cluster heartbeat from the senior Member(Id=2, Timestamp=2008-04-18 11:07:21.948, Address=172.21.205.151:8089, MachineId=29847, Location=process:17367@trulxfw0006,member:trulxfw0006-2) that does not contain this Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5); stopping cluster service.
DEBUG 2008-04-21 18:17:05.753 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=29): Service Cluster left the cluster
The logs on the senior member (2) are interesting though:
DEBUG 2008-04-21 18:17:05.601 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left service Management with senior member 2
DEBUG 2008-04-21 18:17:05.602 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left service WriteQueueSync with senior member 3
DEBUG 2008-04-21 18:17:05.602 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left service WriteQueueAsync with senior member 3
DEBUG 2008-04-21 18:17:05.603 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left service DistributedCache with senior member 3
DEBUG 2008-04-21 18:17:05.603 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left service ServiceControl with senior member 3
DEBUG 2008-04-21 18:17:05.604 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left service InvocationService with senior member 2
DEBUG 2008-04-21 18:17:05.607 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=2): Member 29 left Cluster with senior member 2
I wasn't aware that there could be multiple senior members. Is this indicative of something bad going on?
Thanks, Paul
PS Metalink is not behaving so I can't raise it there.Hi Jon,
I've done some more digging into the logs for the whole cluster.
Of the five nodes that left the cluster, three have the same reason:
trulxfw0002/180-primary-0.log.1:ERROR 2008-04-21 17:05:19.763 Oracle Coherence GE 3.3.1/389p1 <Error> (thread=Cluster, member=34): This node appears to have partially lost the connectivity: it receives responses from MemberSet(Size=2, BitSetCount=2, ids=[8, 32]) which communicate with Member(Id=22, Timestamp=2008-04-18 11:07:29.911, Address=172.21.205.149:8092, MachineId=29845, Location=process:11858@trulxfw0004,member:trulxfw0004-5), but is not responding directly to this member; that could mean that either requests are not coming out or responses are not coming in; stopping cluster service.
trulxfw0003/180-primary-7.log.3:ERROR 2008-04-21 00:40:02.153 Oracle Coherence GE 3.3.1/389p1 <Error> (thread=Cluster, member=28): This node appears to have partially lost the connectivity: it receives responses from MemberSet(Size=2, BitSetCount=3, ids=[35, 38]) which communicate with Member(Id=5, Timestamp=2008-04-18 11:07:21.992, Address=172.21.205.151:8090, MachineId=29847, Location=process:17351@trulxfw0006,member:trulxfw0006-1), but is not responding directly to this member; that could mean that either requests are not coming out or responses are not coming in; stopping cluster service.
trulxfw0006/180-primary-0.log.6:ERROR 2008-04-18 23:13:33.896 Oracle Coherence GE 3.3.1/389p1 <Error> (thread=Cluster, member=1): This node appears to have partially lost the connectivity: it receives responses from MemberSet(Size=2, BitSetCount=3, ids=[14, 42]) which communicate with Member(Id=28, Timestamp=2008-04-18 11:07:34.381, Address=172.21.205.148:8091, MachineId=29844, Location=process:17152@trulxfw0003,member:trulxfw0003-7), but is not responding directly to this member; that could mean that either requests are not coming out or responses are not coming in; stopping cluster service.
Member 29 had been marked as paused during its lifetime by various other nodes, however there are not frequent at the time of eviction:
grep -R "member:trulxfw0003-5" * | grep "failed to respond" | grep "18:17"
grep -R "member:trulxfw0003-5" * | grep "failed to respond" | grep "18:16"
trulxfw0004/180-primary-6.log.8:DEBUG 2008-04-18 18:16:26.337 Oracle Coherence GE 3.3.1/389p1 <D6> (thread=PacketPublisher, member=23): Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5) has failed to respond to 17 packets; declaring this member as paused.
trulxfw0005/180-primary-1.log.7:DEBUG 2008-04-21 18:16:37.315 Oracle Coherence GE 3.3.1/389p1 <D6> (thread=PacketPublisher, member=10): Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5) has failed to respond to 17 packets; declaring this member as paused.
[xflow@lonrs00342 machines]$ grep -R "member:trulxfw0003-5" * | grep "failed to respond" | grep "18:15"
trulxfw0002/180-primary-7.log.8:DEBUG 2008-04-18 18:15:44.161 Oracle Coherence GE 3.3.1/389p1 <D6> (thread=PacketPublisher, member=37): Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5) has failed to respond to 17 packets; declaring this member as paused.
trulxfw0006/180-primary-7.log.9:DEBUG 2008-04-18 18:15:51.477 Oracle Coherence GE 3.3.1/389p1 <D6> (thread=PacketPublisher, member=4): Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5) has failed to respond to 17 packets; declaring this member as paused.
grep -R "member:trulxfw0003-5" * | grep "failed to respond" | grep "18:14"
trulxfw0002/180-primary-0.log.41:DEBUG 2008-04-18 22:18:14.220 Oracle Coherence GE 3.3.1/389p1 <D6> (thread=PacketPublisher, member=34): Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5) has failed to respond to 17 packets; declaring this member as paused.
[xflow@lonrs00342 machines]$
grep -R "member:trulxfw0003-5" * | grep "failed to respond" | grep "18:13"
trulxfw0002/180-primary-0.log.43:DEBUG 2008-04-18 18:13:41.083 Oracle Coherence GE 3.3.1/389p1 <D6> (thread=PacketPublisher, member=34): Member(Id=29, Timestamp=2008-04-18 11:07:34.491, Address=172.21.205.148:8092, MachineId=29844, Location=process:17098@trulxfw0003,member:trulxfw0003-5) has failed to respond to 17 packets; declaring this member as paused.
How closely does a paused declaration correlate with a vote for eviction?
The last node which was kicked out had a similar pattern to trulxfw0003-5 above, however it had significantly more paused declaration messages in the minutes preceding eviction.
We have a listener on the Cluster service which detects the local node leaving the cluster and kills itself. Is this a good idea, or is it safer to let Coherence sort itself out?
Thanks, Paul -
Error while deploying on a cluster
Hi all,
when I deploy my WebApp on a cluster I recieved the following error:
####<Dec 13, 2006 5:18:14 PM CET> <Debug> <Deployer> <eb0bzl58> <admdwsgem> <ExecuteThread: '0' for queue: 'weblogic.admin.RMI'> <<WLS Kernel>> <> <BEA-149078> <Stack trace for message 149004
weblogic.management.ManagementException: weblogic.management.DeploymentException: [Deployer:149233]An unexpected error was encountered during the deployment process. - with nested exception:
[java.lang.NullPointerException]
at weblogic.management.deploy.slave.SlaveDeployer.commitUpdate(SlaveDeployer.java:730)
at weblogic.drs.internal.SlaveCallbackHandler$2.execute(SlaveCallbackHandler.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
>
WebLogic version is 8.1 sp6
My WebApp uses Apache Struts and OJB
Could anyone help me on this problem?
Thanks and sorry for my EnglishHi all,
Any help?
Thanks -
Setting up a cluster for the first time: newbie questions
Any help appreciated with this situation:
I'm trying to set up a cluster for the first time and running into
issues (no big surprise). I'll outline my situation and pose questions
as they arise. If/when I get things to work I'll post a step-by-step
summary of what it took to get a simple cluster going.
Here's what I have:
machines:
1 Windows 2000 machines with WL 6.1
2 RedHat Linux machines with WL 6.1
All machines are on the same Home LAN, can see each other, etc.
IP addresses are:
Windows box: 192.168.1.100
Linux box 1: 192.168.1.102
Linux box 2: 192.168.1.103
servers:
I've set up the Windows machine as my admin server, and set up
a managed server on each Linux machine. I created a cluster that consists
of the 2 Linux machines and deployed the web app and EJB to the cluster.
The Windows machine is acting as a Proxy using ClusterServlet.
The web application has been set as the Default Web Application on the
two Linux machines. All 3 machines are listening on ports 80/443. I also
set up session memory replication through the console.
Application:
I have an application that I package as an EAR file. I'm using it as a
"reference" application designed to mimic a real world app as much as possible.
The EAR file contains a web application that uses Struts. It also consists
of a single Stateless Session Bean. The WAR file and EJB Jar are all
packaged up into the EAR file. I've been able to run this application just
fine on a single managed server on all 3 machines.
The web application works fine, and it can invoke the EJB. I can also
invoke the EJB from Java stand-alone clients. Struts works great. All is
well with the world. Now I'm trying to "cluster-ize" this app using
the environment described above and encountering issues.
I've read the docs and followed the instructions according to the
"Weblogic Bible" book. I can bring up all 3 servers and the Linux
managed servers connect to the cluster just fine. I can also
see the Struts messages in their logs which normally happens and tells me
the webapp is initialized properly. The console tells me that the managed
servers are running. I get no error messages starting up any of the serves.
Here are the problems I am encountering.
When I try to access the Web Application (through a browser on the
Windows machine using http://localhost) I get the following error message:
<Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
x,admin) found no context for "/". This request does not match the context path
for any installed web applications and there is no default web application confi
gured.>
Also, when I try to invoke the EJB through a stand-alone Java client,
I get a JNDI lookup error on the EJB's home interface.
Questions:
Question1: I noticed when setting up the machines that console lets you
define a "Machine" or a "Unix Machine". What's the difference? Should I
define the Linux machines as Unix machines or machines, and what are the
consequences of either choice?
Question2:
I'm not totally clear on how my web.xml should look to set up Struts,
the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
Here is what I had before I tried to cluster and which works fine:
<filter>
<filter-name>MainFilter</filter-name>
<filter-class>com.refapp.servlets.MainFilter</filter-class>
<init-param>
<param-name>myAttribute</param-name>
<param-value>Foo</param-value>
</init-param>
</filter>
<filter-mapping>
<filter-name>MainFilter</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping
<!-- Struts ActionServlet Configuration -->
<servlet>
<servlet-name>action</servlet-name>
<servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
<init-param>
<param-name>application</param-name>
<param-value>refappstruts</param-value>
</init-param>
<init-param>
<param-name>config</param-name>
<param-value>/WEB-INF/struts-config.xml</param-value>
</init-param>
<init-param>
<param-name>debug</param-name>
<param-value>2</param-value>
</init-param>
<init-param>
<param-name>mapping</param-name>
<param-value>org.apache.struts.action.RequestActionMapping</param-value>
</init-param>
<load-on-startup>2</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.do</welcome-file>
<welcome-file>index.jsp</welcome-file>
<welcome-file>index.html</welcome-file>
</welcome-file-list>
(I have set up a "dummy" 0-length file called index.do that triggers
Struts to go into its ActionServlet when first accessing the web site).
Here is how I added ClusterServlet to web.xml:
servlet>
<servlet-name>ClusterServlet</servlet-name>
<servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
<load-on-startup>0</load-on-startup>
<init-param>
<param-name>defaultServers</param-name>
<param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
</init-param>
<init-param>
<param-name>DebugConfigInfo</param-name>
<param-value>ON</param-value>
</init-param>
</servlet>
<servlet-mapping>
<servlet-name>InitServlet</servlet-name>
<url-pattern>/servlet/InitServlet</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>action</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>/</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.html</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.jsp</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>ClusterServlet</servlet-name>
<url-pattern>*.do</url-pattern>
</servlet-mapping>
Clearly there is a problem with the Default Web application not being
seen/mapped properly. Any chances my URL mappings for the filter servlet,
Struts, and ClusterServlet are stepping on each other?
With respect to the EJB, here is what my weblogic-ejb-jar looks like:
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>Hello</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
<stateless-clustering>
<stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
<stateless-bean-load-algorithm>
round-robin
</stateless-bean-load-algorithm>
<stateless-bean-methods-are-idempotent>
true
</stateless-bean-methods-are-idempotent>
</stateless-clustering>
</stateless-session-descriptor>
<jndi-name>Hello.Home</jndi-name>
</weblogic-enterprise-bean>
I run this through ejbc and package everything up into the EAR file.
However, I get a JNDI lookup failure when I try to access the Bean from
a standalone Java client running on the Windows machine.
Here is the jndi.properties file that I am using:
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
java.naming.provider.url=t3://localhost:80
Any ideas what I'm doing wrong here? I can post config.xml also if needed.
Thanks in advance!
Let me try to answer :)....
A1> No need to name diff machines by default weblogic
considers the servers are physically located in diff boxes.
The names are used to differtiate the mang servers which are in
multihomed
Some things to chk
1> Did u targeted the ear file Target as cluster.
2> Can u see on the Admin console that both the man servers
are participated in the cluster( u can see by clicking the monitoring
tab on the Cluster node).
3>Is the URL:PORT for the default web app correct?
the reason: is I dont see the port# on the link u mentioned
4> probably ur ejb might not been deployed on the target thats the
reason u cant access thru java client. If u correct the targets that
will probably fix it.
Hope this helps
Please post the result
Thanks
Sudhir
[email protected] (Chris) wrote in message news:<[email protected]>...
> Any help appreciated with this situation:
> I'm trying to set up a cluster for the first time and running into
> issues (no big surprise). I'll outline my situation and pose questions
> as they arise. If/when I get things to work I'll post a step-by-step
> summary of what it took to get a simple cluster going.
> Here's what I have:
>
> machines:
> 1 Windows 2000 machines with WL 6.1
> 2 RedHat Linux machines with WL 6.1
> All machines are on the same Home LAN, can see each other, etc.
> IP addresses are:
> Windows box: 192.168.1.100
> Linux box 1: 192.168.1.102
> Linux box 2: 192.168.1.103
>
> servers:
> I've set up the Windows machine as my admin server, and set up
> a managed server on each Linux machine. I created a cluster that consists
> of the 2 Linux machines and deployed the web app and EJB to the cluster.
> The Windows machine is acting as a Proxy using ClusterServlet.
> The web application has been set as the Default Web Application on the
> two Linux machines. All 3 machines are listening on ports 80/443. I also
> set up session memory replication through the console.
>
> Application:
> I have an application that I package as an EAR file. I'm using it as a
> "reference" application designed to mimic a real world app as much as possible.
> The EAR file contains a web application that uses Struts. It also consists
> of a single Stateless Session Bean. The WAR file and EJB Jar are all
> packaged up into the EAR file. I've been able to run this application just
> fine on a single managed server on all 3 machines.
> The web application works fine, and it can invoke the EJB. I can also
> invoke the EJB from Java stand-alone clients. Struts works great. All is
> well with the world. Now I'm trying to "cluster-ize" this app using
> the environment described above and encountering issues.
>
> I've read the docs and followed the instructions according to the
> "Weblogic Bible" book. I can bring up all 3 servers and the Linux
> managed servers connect to the cluster just fine. I can also
> see the Struts messages in their logs which normally happens and tells me
> the webapp is initialized properly. The console tells me that the managed
> servers are running. I get no error messages starting up any of the serves.
>
> Here are the problems I am encountering.
>
> When I try to access the Web Application (through a browser on the
> Windows machine using http://localhost) I get the following error message:
>
> <Nov 19, 2002 6:44:33 AM EST> <Error> <HTTP> <HttpServer(1754841,null default ct
> x,admin) found no context for "/". This request does not match the context path
> for any installed web applications and there is no default web application confi
> gured.>
>
> Also, when I try to invoke the EJB through a stand-alone Java client,
> I get a JNDI lookup error on the EJB's home interface.
>
> Questions:
> Question1: I noticed when setting up the machines that console lets you
> define a "Machine" or a "Unix Machine". What's the difference? Should I
> define the Linux machines as Unix machines or machines, and what are the
> consequences of either choice?
>
> Question2:
> I'm not totally clear on how my web.xml should look to set up Struts,
> the ClusterServlet, and a servlet filter I'm using to test Servlet filters.
> Here is what I had before I tried to cluster and which works fine:
>
> <filter>
> <filter-name>MainFilter</filter-name>
> <filter-class>com.refapp.servlets.MainFilter</filter-class>
> <init-param>
> <param-name>myAttribute</param-name>
> <param-value>Foo</param-value>
> </init-param>
> </filter>
>
> <filter-mapping>
> <filter-name>MainFilter</filter-name>
> <url-pattern>/*</url-pattern>
> </filter-mapping
>
>
> <!-- Struts ActionServlet Configuration -->
> <servlet>
> <servlet-name>action</servlet-name>
> <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
>
> <init-param>
> <param-name>application</param-name>
> <param-value>refappstruts</param-value>
> </init-param>
>
> <init-param>
> <param-name>config</param-name>
> <param-value>/WEB-INF/struts-config.xml</param-value>
> </init-param>
>
> <init-param>
> <param-name>debug</param-name>
> <param-value>2</param-value>
> </init-param>
>
> <init-param>
> <param-name>mapping</param-name>
> <param-value>org.apache.struts.action.RequestActionMapping</param-value>
> </init-param>
> <load-on-startup>2</load-on-startup>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <welcome-file-list>
> <welcome-file>index.do</welcome-file>
> <welcome-file>index.jsp</welcome-file>
> <welcome-file>index.html</welcome-file>
> </welcome-file-list>
>
> (I have set up a "dummy" 0-length file called index.do that triggers
> Struts to go into its ActionServlet when first accessing the web site).
>
> Here is how I added ClusterServlet to web.xml:
>
> servlet>
> <servlet-name>ClusterServlet</servlet-name>
> <servlet-class>weblogic.servlet.internal.HttpClusterServlet</servlet-class>
> <load-on-startup>0</load-on-startup>
> <init-param>
> <param-name>defaultServers</param-name>
> <param-value>192.168.1.102:80:443|192.168.1.103:80:443</param-value>
> </init-param>
> <init-param>
> <param-name>DebugConfigInfo</param-name>
> <param-value>ON</param-value>
> </init-param>
> </servlet>
>
> <servlet-mapping>
> <servlet-name>InitServlet</servlet-name>
> <url-pattern>/servlet/InitServlet</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>action</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>/</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.html</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.jsp</url-pattern>
> </servlet-mapping>
>
> <servlet-mapping>
> <servlet-name>ClusterServlet</servlet-name>
> <url-pattern>*.do</url-pattern>
> </servlet-mapping>
>
>
> Clearly there is a problem with the Default Web application not being
> seen/mapped properly. Any chances my URL mappings for the filter servlet,
> Struts, and ClusterServlet are stepping on each other?
>
> With respect to the EJB, here is what my weblogic-ejb-jar looks like:
>
> <weblogic-ejb-jar>
> <weblogic-enterprise-bean>
> <ejb-name>Hello</ejb-name>
> <stateless-session-descriptor>
> <pool>
> <max-beans-in-free-pool>100</max-beans-in-free-pool>
> </pool>
> <stateless-clustering>
> <stateless-bean-is-clusterable>true</stateless-bean-is-clusterable>
> <stateless-bean-load-algorithm>
> round-robin
> </stateless-bean-load-algorithm>
> <stateless-bean-methods-are-idempotent>
> true
> </stateless-bean-methods-are-idempotent>
> </stateless-clustering>
> </stateless-session-descriptor>
> <jndi-name>Hello.Home</jndi-name>
> </weblogic-enterprise-bean>
>
> I run this through ejbc and package everything up into the EAR file.
> However, I get a JNDI lookup failure when I try to access the Bean from
> a standalone Java client running on the Windows machine.
> Here is the jndi.properties file that I am using:
>
> java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory
> java.naming.provider.url=t3://localhost:80
>
> Any ideas what I'm doing wrong here? I can post config.xml also if needed.
>
> Thanks in advance!
-
Lot of build errors in project created for debug CRM 5.0
Hi SDN!
I want to setup java debugging for CRM 5.0 modified application. According to note 1154496 I created project "crm_b2b".
I took file src.zip from
server\usr\sap\<system name>\<instance>\j2ee\cluster\<server number>\apps\sap.com\crmb2b at first try and from
server\usr\sap\<system name>\<instance>\j2ee\cluster\<server number>\apps\sap.com\crmcrb2b at second try. After import NWDS performed building for my project and shows lot of build errors (more than 12 thousands for 1-st try and near 2 thousands for 2-nd try). I reduced some of error by adding jar files from crm war file to build path. But I don't know how to resolve errors like "The method hasPermissions(Permission[]) in the type UserBase is not applicable for the arguments(EserviceHierarchyPermission[])" (error in com.sap.eservice.common.user.permission.CommonPermission.java, line 186). Also some of errors concerned with requierd libraries in build path.
My NWDS is 7.0.14
CRM 5.0 SP 11
Regards, Lev
Edited by: Lev Kulaev on Jul 3, 2008 2:03 PMHi!
Here are my doings:
1) set breakpoint in standart code
2) run my debug configuartion
3) run CRM 5.0
4) NWDS stopped execution on breakpoint
5) I right-click on variable, choose "Watch"
6) NWDS shows me "error during evaluation" in "Expression" tab for selected variable
I'm confusing since it was possible to use "Watch" for variables in CRM 4.0.
Yes, you right, I can view all variabe values on "Variables" tab. I wanted to use "Expression" tab because it's more comfortable for me but it seems that I can use only "Variables" tab.
So, thanks for help! My question is answered, but if you can give me more information about subject, you're welcome.
Regards, Lev
Maybe you are looking for
-
Nokia Lumia 1520 Video recording/playback issues.
I seem to have issues with video recording. Video seems to have some pause "still" effects when taking video and playback in phone shows those stops very clearly as it freezes for while and jumps many seconds forward. When I play same file in PC with
-
AE CS6: Could not convert Unicode characters (23 :: 46)
I am sudenlty getting this error message. I was importing a native XDCAM file into AE Win 7 when the error message first appeared. Subsequent to that, merely clicking on the import button (no file selected) gives the same error message. It seemed to
-
HELP! Emails in Mail are suddenly gone. How do I change this?
Hello -- Using Leopard 10.5.5 and Mail 3.5. Can I change it so that Mail does not automatically delete emails? In the Mail app on my iBook, the emails never go away (unless I delete them..) Yet on my G5 and my MacPro the emails get deleted after awhi
-
Is there a fix for the Heartbleed bug for iMac, iPad, iPod?
I just read an article that Google has come out with a fix for PC users to download so they will not be affected by the Heartbleed bug. I was wondering if Apple has come out with a security fix of their own yet?
-
How do I establish a Hierarchy for Apple TV content viewing?
I'm using an Apple TV to watch hundreds of hours of video tutorials on my TV. The content is all Quicktime movies, but they aren't tagged for "Genre" Etc. Several of them are broken down into as many as 23 separate short movies per subject. I'm taggi