Debugging outbound idocs

Hi,
Can anyone suggest me how to debug the outbound idocs like in case we19 for inbound.
i am creating an idoc for ORDERS message type with process code ME10. i need to debug to know if data is populating in segments correctly.
shylesh

Hi Sailesh,
You can set break point at FM IDOC_OUTPUT_ORDERS and go through the code step by step.
Also you can check customer function for any custom enhancement related to populating/deleting IDoc segment within the above FM.
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

How to debug Outbound IDoc

Hi Friends,
I want to know how to debug Outbound IDoc .
is there is any tool for debugging outbound idocs
Thanks,
Bhaskar.

hi
Go to tcode WE19. Give idoc number press F8. You will get next screen. There you have push button in tool bar called "INBOUND FUNCTION MOUDLE". Click on it. You will get one pop-up screen.
There give function module name and tick the check box called " Call in debugging mode" and select radio button called "In foreground". Then press ok. It will take you to debugging mode.
Reward if it dose.
Thanks
Siva kumar

How to debug outbound Idoc function module for invoice

I have to debug the outbound IDOC function module and UserExit for invoice message type INVOIC, process code SD09, function module is IDOC_OUTPUT_INVOIC and user exit for the function module LVEDF001.
I tried putting the break point in function module IDOC_OUTPUT_INVOIC and recreate the IDOC using WE19 but it creates the idoc but does not stop at the break point. I have also tried generation of idoc through VF02. It again creates the idoc but does not stop at the function module.
Please let me know if I am missing any thing and not doing it right.
Appreciate your help.
Rohit

Hi Ali,
I faced the same problem. Thing is the break point is not getting triggered when i ran tha IDOC through WE19.
What i have done is i created a project for my exit in CMOD and kept some junk code in the exit and executed it through BD21. Then the Break point got triggered. See if it works.
Regards,
Uday S.

How debug outbound idoc

hi ,
How i can set break point in FM , for outbound idoc .
Thanks,
Sridhar
Moderator Message: Please search before posting
Edited by: kishan P on Sep 6, 2010 7:19 PM

hi ,
How i can set break point in FM , for outbound idoc .
Thanks,
Sridhar
Moderator Message: Please search before posting
Edited by: kishan P on Sep 6, 2010 7:19 PM

OUTBOUND IDOC DEBUGGING

I have Output type defined for the application V3
i.e meant for Billing.and the output type is custom development with name ZD00 for invoice-Bill to.
This output type is defined for edi processing.
Now the problem is when invoice is created and this
outputtype is selected the quantity field in idoc and invoice differs.just get double in idoc.but if the same output is fired again data in idoc gets corrected.now i want to debug the idoc outbound processing.what i did i run the transaction we41 and find the process code and find the function module that is running in the background for collection of data of invoice and
filling the idoc.but but but the problem is i put break point in the function module to check the value at run time but this is not triggered . iam confused tell me how to debug the outbound idoc.
Help me out i will be waiting for the response.

Hi,
You can use the Update Debugging. If you know the prognam name/function module of your source code, upon saving your document, a new screen will pop up if the Update Debugging mode is on. From this, you can then hit F8 to stop on your break-point.
Let me know if you need further help.
Thanks,
Eric

How to Debug the Outbound IDOC

Dear SDN Members,
How to debug the outbound idoc please.
Thanks in advance
Yerukala Setty

Hi,
IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc in transaction BD87 you can put a breakpoint in the function module and it will stop there.For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
Thanks,
Asit Purbey.

Debug the Outbound IDoc

Hi,
I have a outbound IDoc.
I would like to reprocess the same and test the FM.
I am going through the Tcode :WE19.
put the IDOC : XXX in the exisiting IDoc field. Execute.
I get to see the IDoc structure and the data.Then i click on the "standard outbound processing".
I would like to get into the FM and debug it.
But once i press "standard outbound processing".
It is giving a pop up which says "start outbound processing of file immediately"
No of IDoc's to be generated.
Receiver port
Port type
output file
etc.
But i would like to get into the debug mode.
Pls advise.

Set ur Break point at your code
now come to VA02 Transaction and use order number.
click on enter
GOTO->HEADER->OUTPUT
Give the output type and print medium should be 6(EDI) or A( ALE)
Click on Further data and select->select send with periodically scheduled job and save it.
Now Come to SE38 and use RSNAST00
Output Application : V1
Object key - order Number ( 10 digit)
Output type - BA00( SAP Standard)
Transmission medium = 6(EDI) ,A(ALE)
Now it will stop at your code.
Reward Points if it is helpful
Thanks
Seshu
Message was edited by:
Seshu Maramreddy
Message was edited by:
Seshu Maramreddy

Outbound idoc control recorderror - REFINT field

I am trying to send orders.orders05 idoc from ecc to xi
the message that I get in we02 in ECC is
EDI: Field REFINT in control record with value 'T080902134731A ' is invalid
Does somebody knows where this field is configured ?
when I edited this idoc in we02 and erased this value the process was sucessfuly
but when I try using we19 it assigns this value automatically
thx
Shai

I dont think it is populated in SAP, rather it comes afetr outbound IDOC is sent and tstaus record is updated afterwards.
I would say debug IDOC in WE19, create a watchpoint for the field to see where it is changing values

Debugging Outbound Function module in EDI

Hello All,
I have a query regarding debugging function module which is used for creation of outbound Idoc for Purchase Order.
We have a Z process code which is assigned to a Z function module which creates an IDOC while a PO is created in the system.
But If I set break points in the Function module, the execution does stop there.
Can any one please tell me how to debug outbound processing Functioon module while PO is created.
Regards
Arindam

Hi,
There are 2 ways to to debug an outbound idoc triggered by an output type. One way is to set the output timing to 1, and save the purchase order and then execute RSNAST00 which will take the control to the breakpoint.
You can also debug the idoc with the output timing set as 4.
Here the idoc is triggered in update mode. Hence any breakpoints you may have set before will not reflect. Hence you need to activate update debugging.
Below are the steps for the same..
1. Add the output type in purchase order.
2. Enter '/h' to activate debugging in transaction window.
3. Save purchase order.
4. The process enters debugging mode.
5. In Settings tab, select checkbox for Update Debugging.
6. Click F8.
7. The control will appear to go out and re-enter debugging mode.
8. Now from the menu bar, in breakpoints option, choose Breakpoint At Function Module option, and give the name of the function module which is processing the idoc.
9. Once breakpoint set, click F8.
10. The control will now go to the function module. You can then debug the FM.
Hope this information is helpful.

Debugging of idocs

hi,
can anyone tell me how to debug idocs step by step with tcodes.
regards,
srinu.

Hi srinu
If IDoc is in status 51, it means it was properly delivered to R/3. So you can now set a break-point in the respective IDoc handling function and reprocess the IDoc with BD87 (or report: RBDINPUT). Then debug the IDoc function and find where the error message is issued.
If you un-check the option field "background processing," you will get more options and in the menu there is a selection that allows you to throw the function into batch input dialog mode. If you choose "process foreground from error," it will stop on the screen where the error happens. Then you will know which field is not supplied properly by XI.
IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc with BD87 you can have a breakpoint in the function and it will stop. For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
Rewards if helpfull
Regards
Pavan

Degugging Inbound and Outbound idocs

Hi friends,
Can any one help me in debugging Inbound and outbound IDocs?
1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
2.How to find out the outbound Idoc FM and debug it?
Your help is appreciated.
Thanks in Advance.

Hi,
Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
Hope it helps,
SG.

Issue in Partner Profile config for Outbound IDOC

Hi Experts,
I have requirement like, When ever there will be any change in a Sales Order an Outbound IDOC will get triggered though a output type. This IDOC will save a file in the Application Server.
The Message Type i am using is ORDERS and the Basic Type is ORDERS05.
I have created a Partner Profile also a Receiver Port of type FILE.
I have Assigned Message type in Outbound Parameters.
I have assigned Receiver Port and Basic type under "Outbound Option".
I have Assigned Applications as 'V', Message type as 'Output Type' and Process Code under "Message Control".
When i am changing any Sales Order no IDOC is getting Triggered. I checked the Sales Order>Extras> Output> Header> Edit, the Output type is in Status RED with Message " No Partner Profiles (Message Control) Maintained".
Please guide me if i have missed any configs.
Help me solving this issue.
Thanks in Advance!
Priyabrata

Hi Priyabrata,
please try changing in your partner profile the application from V to V1. Another problem that's often causing the partner profile not to be found are the partner functions that are added automatically by SAP, but sometimes forgotten in the partner profile.
I don't have a SAP system at the moment, but as far as I remember the long text of the message indicates the partner profile parameters that SAP uses for the lookup.
If all of this doesn't help, I'd quickly debug this and see why SAP's not picking up the correct partner profile.
Cheers, harald

Error in the content of Delivery output ASN outbound IDOC

Hi,
I created an Delivery order for an SO and processed to PGI.
Then the ASN Outbound idoc is triggered successfully!
But when i checked the content of this ASN Outbound IDOC, i found some data were not populated into the IDOC from the Delivery order...
So i should debug which program to determine the problem???
I dont know which one is the right one for me to debug the problem:
1) debug the output FM for this IDOC
We19(entering the error IDOC)-->Test outbound
2)VL02N>Delivery output>Enter the output type>Then swiching on the debugging mode>Enter to debug???
For above 2, which one is the one who retrive the DO content into the output IDOC???
Thanks very much!!!!!
Message was edited by:
Hoo Laa
Message was edited by:
Hoo Laa

Hi,
If i am right, there should be an output type that is trigerring this IDOC from the delivery ---right.
Can you please check the delivery and let me know....
At Extras - Delivery output - Header level...
Regards,
Syed Nasir

I looking for a transaction for debug the IDOCS

Hello friends,
I looking for a transaction that allowed me to debug the IDOC´s when the direction is only 1 (Outbound), for ex. for IDOC´s has direction 2 (Inbound) I used the WE19 transaction, and to choose the "Inbound Function Module" button and I take the "Call in debug mode" checkbox,
Can you tell me if exist another program for this?
Thanks in advance,
David

Hi,
IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc with BD87 you can have a breakpoint in the function and it will stop. For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
For your knowledge [reference1|Re: How to debug Idoc; [reference2|Outbound IDoc debug;.
May it helps you.
Regards,
DS.

Hw to debug outbound function module

Hi,
I know how to debug inbound idoc using WE19 can sum1 tell how can i debug outbound function module.
i want to debug to see as to why certain segments are not being updated in IDOC PORDCR1.PORDCR102.
even though i put an external break-point it does't trigger .
Regards,
Jayaram Maganti

>
JAYARAM MAGANTI wrote:
> Hi,
>
> I know how to debug inbound idoc using WE19 can sum1 tell how can i debug outbound function module.
> i want to debug to see as to why certain segments are not being updated in IDOC PORDCR1.PORDCR102.
> even though i put an external break-point it does't trigger .
>
>
> Regards,
> Jayaram Maganti
Hi
See this link this is helpful for you.[debug outbound function module|Re: Cannot debug outbound queue;

Debugging outbound idocs

Similar Messages

Maybe you are looking for