Dedicated Upgrade / Migration Tracks at OOW

At Oracle OpenWorld this year (November 11-15, 2007, San Francisco, http://www.oracle.com/openworld/2007/index.html) there is a dedicated JD Edwards program self-contained in the San Francisco Hilton. This allows us to concentrated on JD Edwards specific topics, and gives us all a chance to interact together in a fairly small space.
Included in the JD Edwards program there will be a specific dedicated track for Upgrades with 5 sessions, and a second track for Migrations with 4 sessions. Each of these tracks will include a panel discussion with customers that have completed these projects, and a chance for you to ask them questions such as "how did you justify the project", "what did you learn to do and avoid", "where and when do you need consulting help", and more.
More information about the JD Edwards track itself is available here (http://www.oracle.com/openworld/2007/jd-edwards.html).
Dan Stern

Hi Dan,
You are on the right track. However you can perform some of these function "online".
First you want to ensure that you are running at a minimum, Nexus 1000v SV1(4a) as ESXi 5.0 only began support on this release. With SV1(4a), it provides support for both ESXi 5.0 and ESX/i 4.1.
Then you can follow the procedure documented here:
Upgrading from VMware Release 4.0/4.1 to VMware Release 5.0.0
This document walks you through upgrading your ESX infrastructure to VMware Release 5.0.0 when Cisco Nexus 1000V is installed. It is required to be completed in the following order:
1. Upgrade the VSMs and VEMs to Release 4.2(1)SV1(4a).
2. Upgrade the VMware vCenter Server to VMware Release 5.0.0.
3. Upgrade the VMware Update Manager to VMware Release 5.0.0.
4. Upgrade your ESX hosts to VMware Release 5.0.0 with a custom ESXi image that includes the VEM bits.
Upgrading the ESX/ESXi hosts consists of the following procedures:
–Upgrading the vCenter Server
–Upgrading the vCenter Update Manager
–Augmenting the Customized ISO
–Upgrading the ESXi Hosts
There is also a 3 part video highlighting the procedure to perfrom the last two steps above (customized ISO and upgrading ESXi hosts)
Video: Upgrading the VEM to VMware ESXi Release 5.0.0
Hope that helps you with your upgrade.
Thanks,
Michael

Similar Messages

Upgrade/Migrate 9.3.3 Planning apps to 11.1.2.2

I am in the next step of our upgrade from 9.3.3 to 11.1.2.2 and ready to migrate our Planning applications. I have read many of the posts related to this and have a general list of steps, but I have slightly different situation than what I have seen posted before.
To summarize, we have installed 11.1.2.2 on new servers. Our old 9.3.3 is still up and running on different environment. I have sucessfully completed the following:
1.     Foundation Services/Shared Services installed and up and running and users/groups successfully migrated.
2.     Essbase and EAS installed and up and running. All Essbase applications (except for the Planning apps), have been successfully migrated from 9.3.3 to 11.1.2.2.
3.     Planning has been installed and is up and running. While there are no Planning apps in the new system, I can open the Planning Administrator via WorkSpace.
So the next step is to get my Planning apps moved/migrated from the 9.3.3 environment to the new 11.1.2.2.
To complicate matters, we are switching from SQL Server repository in 9.3.3 to Oracle in our new 11.1.2.2. So the first thing we did was to create a new Oracle schema for our Planning app repository and using SQL Developer migrate wizard, we copied/migrated the tables and data from the old SQL Server to Oracle. It appears that all the tables and data were successfully copied into Oracle.
Our old Planning application is called PlanTest. The application owner is a native user called planadm. My intended migration plan (and my questions) are:
1.     Do I create a new blank Planning app called PlanTest using native account planamd in 11.1.2.2?
2.     If I use my new Oracle repository for this blank app, will it wipe out the old converted data or will it try to upgrade/migrate it?
3.     Or..should I take a backup of my new converted repository first. Then drop/recreate the Oracle Schema (so no tables) and let Planning build the repository when I create the blank Planning app? Then capture the owner SID in the new HSP_USER table. Stop Planning. Then overlay the database backup of 9.3.3 over the newly created repository and replace the owner SID info. Then Restart Planning.
          ** My concern: Is the Planning app repository table structures the same between 9.3.3 and 11.1.2.2?
4.     Open Planning and hope that the application PlanTest appears!
5.     Use Planning upgrade Wizard to finish the migration and upgrade the repository.
6.     Push/Create app to Essbase.
7.     Export data from old app to .txt load file and reload into new Planning cube.
8.     Convert/Migrate Business Rules using info from John's blog.
I am sure I missed something. Any suggestions or comments on these steps would be appreciated. Bottom line is I need to get this app (and several others) migrated successfully with all metadata, security, forms, rules etc. working. Rebuilding them from scratch is NOT an option.
Also, to clarify. This is a Classic Planning app. We are not using EPMA.
Thanks,
Mike

Following the steps, the upgrade/migration of the Planning application worked successfully. The app and forms were all migrated and was able to push to Essbase application successfully. The only issue was security. While the users/groups seem to appear in the migrated Planning app, none of their security access/filter info migrated. We have Planning security defined down to the member level in the application and it appears none of that successfully migrated, so we would need to manually re-assign all of that security. Any thoughts of what may have happend or step I may have missed?
Also have moved on to attempt migration of the Business Rules to Calc Manager. Using John's 2nd alternative method from his blog, I export the rule from 9.3.3 EAS to HBRRules.xml file, copy it to the appropriate 11.1.2.2 folder, select "Migrate" on the PlanTest planning app in Calc Manager, select the app and Plan type and all seems well with the Import screen even indicating that the Rule and variables were Inserted. But I never see the rule appear. Could this be an "owner" issue or is there something I need to do to the .xml file before the migration step?
Mike

Oracle Forms & Report Upgrade/Migrate from 6i to 11g

Hi All,
We are planning to upgrade/Migrate from Oracle Froms and Reports 6i to 11g. Can some one please give me an high level steps to upgrade and migrate from 6i to 11g version.
Many thanks in advance.
Kind Regards,
Mohan

hi ,
use below steps for Eliminate this issue
To start the wizard version of the Forms Migration Assistant:
1. On Windows systems, set the environment variable FORMS_PATH:
SET FORMS_PATH=%ORACLE_HOME%\forms
On UNIX systems, set the variable FORMS_PATH as in the example below:
setenv FORMS_PATH $ORACLE_HOME/forms
2.
In Windows, from the Start menu, select ORACLE_HOME | Forms Developer |Oracle Forms Migration Assistant (GUI Mode), or at the command line, start the conversion utility by entering: frmplsqlconv.bat mode=wizard.
or
in UNIX, enter frmplsqlconv.sh mode=wizard.
The Conversion Wizard Welcome dialog displays.
Regards,
Babu

ITunes 10.6.1 upgrade changes track names to Chinese characters.....

This is very weird, after upgrading, the track names in iTunes, TV Shows, Music and others changed to Chinese characters and wingding characters...not all of them though, just the visible ones so when I scroll I still have regular English names....very strangely, these incorrect names are also visible on AppleTV, I guess it takes the names straigh of my Air....anybody any idea how to fix this...it happended after restarting iTunes after the upgrade....

May 24, 2012, further update.
I had my pst file copied from Outlook 2007 and installed on a test computer with iTunes 10.1.6 and the calendar sync occurred no problem
My techie, then basically said it was some registry files on the desktop that must be corrupted and he deleted them with a program.
He is back tomorrow for futher testing I will keep you informed

Ask the Expert: Cisco Unified Contact Center Express (UCCX) Version 10.0 - Upgrade, Migration, and New Features Overview

With Abhiram Kramadhati
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the upgrade, migration methods, and new features of the latest released Version 10.0 of Cisco Unified Contact Center Express (UCCX) with Cisco expert Abhiram Kramadhati.
Abhiram will address the following on the latest release of Cisco UCCX Version 10.0:
Installation
Upgrade from previous versions - both Linux and Windows
Migration from MCS to Cisco UCS environment - Different methods and best practices
New features - Overview and limitations
This discussion will center on install and upgrade best practices, changes in hardware support, and migration methods from MCS to Cisco UCS. He can also briefly discuss the new features introduced in 10.0. The discussion focuses the latest versions, but queries about general Cisco UCCX topics can be addressed too if time allows.
Abhiram Kramadhati is an engineer with the Contact Center Backbone group. He has been working with Cisco UCCX since he joined Cisco. During two years at Cisco, he has built his expertise around Cisco UCCX telephony applications, Java Telephony API (JTAPI) integration, Cisco UCCX system behavior, LDAP components, and Cisco UCCX as IP interactive voice response in Unified Contact Center Enterprise (UCCE) environments. He also works on other technologies, including Unified Communications Manager and UCCE. He has been involved in many technical escalations in the Asia Pacific region. Abhiram also holds a CCIE in voice (40065).
For more details about this topic, refer to the recently published Tech-Talk Video and Blog.
Remember to use the rating system to let Abhiram know if you have received an adequate response.
Abhiram might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in the Voice, Video, and Collaboration community, sub-community, Contact Center discussion forum shortly after the event. This event lasts through January 31, 2014. Visit this forum often to view responses to your questions and the questions of other community members.

Hi Anurag,
Thanks for your questions.
1:Is there change in DB architecture as CUIC is the only option as compared to previous linux version UCCX ?
I assume this is from the tables regarding historical data. The database schema essentially remains the same since UCCX 9.0 had CUIC too and we had a seperate DB Space for CUIC and we still continue with that. The traditional historical tables remain and the replication process remains the same too.
2:Is there any version change for Linux OS used as VOS,
The Linux version is Red Hat Linux 5. To be precise:
[root@uccx10pub /]# cat etc/redhat-release
Red Hat Enterprise Linux Server release 5.7 (Tikanga)
3:Is there any API architecture change in UCCX 10 from previous releases ?
I can answer this more of an overview. The only enhancement in the API side is the introduction of REST API step in the script editor. You can now make REST calls from the script and this ofcourse opens up a whole new world of possiblities.
4:Since from UCCX 10 , we can only use either CAD or Finnesse at one time, whats the impact of changing this after some time in production, let say , i used CAD for 2 months and then i decided to move to Finesse, whats the impact ? or is it a smooth change as switching CUIC and HRC in previoius release ?
For the scenario you mentioned, there is absolutely no problem. The point to note is that the Finesse services are activated/deactivated but the CAD desktop services are ALWAYS running. The only condition to keep in mind is that you can use ONLY ONE type of agent desktop at any time. Also if Finesse is not used and CAD operations are used extensively, it is advisable to shutdown the Finesse service.
5:Is 3rd Party UCS hardware supported by UCCX 10 instead of using Cisco manufactured UCS , can i use HP hardware for Virtualisation ?
Yes, it can be used. This is something called as "Third party specs based specification". The most important things seen for compatibility are:
Inter CPU Model
It it is on thVMWare Hardware Compatibilty List
You can get more information about this on the "Can I use this server?" section of UC Virtualized Hardware page:
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#.22Can_I_use_this_server.3F.22
6:Is Host name change supported?
Yes, the hostname change is supported. The prcocedure is documented in the UCCX 10.0 Administration Guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_10_0/configuration/guide/UCCX_BK_W1AF9DDD_00_uccx-admin-guide-10.0.pdf (Pg 168)
Cheers,
Abhiram Kramadhati

Upgrade/Migrate AS 10.1.2.2 Identity Mgmt, Forms, Disco to Fusion MW 11g

Hello All,
Need info/steps how to upgrade/migrate AS 10.1.2.2 Identity Mgmt, Forms/Report, Disco and Portals to Fusion MW 11g to new servers.
We're currently running AS 10.1.2.2 Identity Mgmt, Forms/Report, Disco and Portals on Suse SLES-9 64-bit OS.
We're currently running AS 10.1.2.2 Portals on Sun Solaris 8 64-bit OS.
Fusion MW 11g does NOT support Suse SLES-9 or Sun Solaris 8 64-bit OS.
Our Sys Admin said it's complicated to upgrade Suse SLES-9 to Suse SLES-10 OS on the same box.
We'd like to install Suse SLES-10 OS on a NEW SERVER and upgrade/migrate AS 10.1.2.2 Identity Mgmt, Forms/Report, Disco and Portals to Fusion MW 11.1.2.
We'd like to instal Sun Solaris-10 OS on a NEW SERVER and upgrade/migrate AS 10.1.2.2 Portals to Fusion MW 11.1.2.
Have anyone done this upgrade/migrate at the same time?.
We opened an SR with Oracle Support but the answers are not quite clear so If someone had done this upgrade/migrate before then it's very helpful.
Any helps?.
Thanks,
Tom

Both Infra and portal database is going to be in the database. You need to get the database copied over to new server and select upgrade option

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2

Upgrading/Migrating Portal System from EP 6.40 SP21 to EP 7.0 SP2
IN EP 6.40 we have ESS/MSS 60.2.2,KM,NWDI ,IN BAck end we have ECC 6.0 .
COuld you let me what are the list of measures/Prerequisites i need to take before going for upgrade .

Hi,
You can upgrade your portal with all usages that you have installed. You need to check upgrade guide as well.
You need to check if there is any custom development on the portal to migrate it to new version.
Thanks
Sunny

Upgrade/Migration using PCD from 8.6 to 10.5

Customer has a cluster with a publisher and 7 subscribers. Infrastructure is a mix of 6 spec-based VM servers and 2 MCS servers. I am considering using PCD, but I have the following questions:
With the mix of virtual and MCS servers, do I need to do a migration vice an upgrade?
If I do the migration, does this essentially double the virtual real estate required until the migration is complete and I can delete the 8.6 servers?
Any other gotchas that I should be aware of? This will be my first PCD upgrade/migration.
Thanks in advance,
Nathan Richie

PCD will install and push the info one server at a time, you can either keep the same IP addressing and hostname, or change it. If you're going to keep the same, you need to build a separate network with ALL the services you have in production and make sure you do not cause a conflict by separating the networks.
If you have the CAR DB at full capacity, delete the records to avoid timing out.
And as Aman said, 10.x and above are ONLY supported over ESXi, no baremetal support.

Upgrade & Migrate from V11.1.1.3 to V11.1.2.2

Hi All,
Currently we are using Hyperion Essbase Server V11.1.1.3 in Windows Server 2003 R2.
We are in a plan to Upgrade & Migrate to Essbase Server V11.1.2.2 in Windows Server 2008.
We are only using Essbase w/o Shared services.
Could you please provide me the below information:
(1) Whether LCM Utility can be used to perform this Upgrade & Migration from V11.1.1.3 to V11.1.2.2 ( not using the Shared Services)?
(2) Any documents w.r.t this Upgrade & Migration using LCM Utility?
Regards,
Swathi.

CelvinKattookaran replied (in response to Sh!va) 1 week ago
Shiva, why not an upgrade?
--I understand that "User have already configured the new environment " .
Cheers!
Sh!va

Can I transfer files from a Mini running 10.4.11 to a new Mini running Lion? States I need to upgrade Migration Assistant, but I see no viable path I can take. OPtions to get photos over to new Mini?

Can I transfer files from a Mini running 10.4.11 to a new Mini running Lion? States I need to upgrade Migration Assistant, but I see no viable path I can take. OPtions to get photos over to new Mini?

Thanks Mende1; I know that PPC apps won't function on Intel machines but I can migrate the Universal apps, right? There is such a large gap between Tiger and Mountain Lion - can I still migrate files directly from one to the other taking the Universal apps as well? Sorry, I'm not very computer savvy!
Len57

Migrate tracks from one server to another

Hello, I've read a few guides how to migrate tracks from one server to another, but it doesn't help me.
What I've done:
1) I've exported my SC from SLD at my old server
2) Then imported it at my new server
3) Updated CMS from SLD
4) Created a track at my new server and added imported SC
Then I have to import my SC from old server with sources and there is some errors happens for me.
First option: I have exported my SC from CMS, but the SCA file is about 5kB. I unzipped it and there was ARCHIVESOURCE folder but it hasn't anything seems to be my sources. That file is checked-in successfully through the transport studio, but no sources imported into DTR.
Second option: I have exported the SCA file by using NWDS. It's exported OK, size ~1.3MB, ARCHIVESOURCE folder with mine sources. But when I try to check-in it, it fails with an error "import failed, because the sources are not contained in the archive
Could anybody helps me to achieve my task? I stuck with source import.

Hi Kirill,
important to know that assembly ALWAYS uses the CONS/ACTIVE workspace for SCA generation.
If you for instance create a change (an activity), and you activate and release it but you don't import this activity into CONS, then it won't be part of the CONS/active and then due to obvious reasons assembly won't produce the sources either (no possibility to do an explicit activation on cons level as here a force activation takes place at import, but of course the import into cons is a necessary step, because as mentioned assembly uses the cons/active).
Can you please confirm/deny how this scenario looks like on your end?
Thank you!
Best Regards,
Ervin

Upgrade/Migration link broken?

I am getting page not found for
http://blogs.oracle.com/warehousebuilder/2010/03/owb_11gr2_migration_and_upgrade_paths_from_previous_versions.html
What did happen?

Thanks for your reply. Did you update the link on Upgrade / Migration to 11gR2 + 64-bit client available
Posted By: David Allan -- Nov 28, 2011 8:17 PM ?
I find the white paper dated Dec 2010. There are various issues/anomalies raised in this discussion board on upgrade.
Do we have a revised white paper/doc with resolutions/suggestion related to the issues?
Thanks in helping.

Upgrade + migration from nw04 on windows 2000 to nw04s on windows 2008

Dear all,
I need to upgrade and migrate my nw04 java system from windows 2000 to nw04s on windows 2008.
From the PAM I can see that NW04 is not supported on windows 2008 and that nw04s (7.0) is not supported on windows 2000.
So, which is the correct upgrade path? Do I need an intermediate win 2003 server which is supported from both the releases?
Thanks and regards in advance
Federico

Hello my friend
This will be a very interesting project for sure. As you know, kernel 640 is not supported on win2008 and 700 is not supported on win2000, so here there must be a win2003 as a transition platform for this upgrade+ migration, not to mention migration from 32bit to x64 is also involved. You didn't mention the DB versions in source and target systems, as well as the SAP product you're trying to go with. Here's a brief checklist right now for what I can think of, once you're back with more details then let's make it intact:
I assume your source OS/DB is win2000SQL2000 32bit, target one is win2008SQL2008 x64.
1. Install a win2003 x64 server and SQL2000 32bit;
2. Install a new SAP instance same as your source system release in 32bit compatible mode;
note: if the system being migrated is BW, then be aware of that you might want to bring new features in SQL2008 of row compression and table partitions.
3. Detach the source DB from old SQL2000, and attach it to new SQL2000; some post configuration for DB copy will be required (STM tool). Now you've finish a migration from win2000 to win2003 32bit;
4. Start upgrading NW04 to 7.0, 640 to 700, find details in upgrade guide; Now you have your 700 instance on win2003 x64+SQL2000 32bit;
note: since release 701(700 EHP1) is available now, which you might want to upgrade instead of 700.
5. Change the collation 850BIN2 for SQL2000 32bit, detach DB;
6. Since migration from 32bit to x64 cannot be done smoothly, now you have to uninstall everything and reinstall win2003 and SQL2008 x64, followed by a new 700 or 701 instance;
7. Attach the source DB, post configuration for DB copy will be required (STM tool); Now you have your 700 or 701 instance on win2003 x64+SQL2008 x64;
8. Detach the SQL2008 DB;
9. Now go to your target win2008 OS, install SQL 2008 x64 and new 700 or 701 instance;
note: there might be some restrictions for NW 7.0 on win2008, go with the latest release (SR3 or newer).
10. Attach DB to this final OS/DB version: win2008 x64+SQL2008 x64, post configuration for DB copy will be required (STM tool).
Helpful?
Regards,
Effan

ANNOUNCEMENT: EBS Strategy Track at OOW 2007

Hi All
I am managing the overall EBS Strategy Track. The EBS Keynotes, R12 Upgrade Momentum and all the relevant information on the same can be found here.
http://www.oracle.com/openworld/2007/focus/focus-on-ebs-applicaions-strategy.pdf
2. MTE-EBS-Schedule.pdf
a. MTE stands for “Meet The Experts”, which is a corner at Oracle OpenWorld where customers and employees can meet the experts.
b. http://www.oracle.com/technology/products/applications/events/oow-2007/mte-ebs-schedule.pdf
b. This file contains only those specific for E-Business Suite
3. MTE-All-Apps-Schedule.pdf
a. http://www.oracle.com/technology/products/applications/events/oow-2007/mte-all-apps-schedule.pdf
b. This file contains the MTE that are valid for all Applications Unlimited and that include Oracle E-Business Suite.

congrats, Redman, to your FrontRow workaround.. tricky&smart
I guess, your demands don't offer any other solution. Speaking of me (no use of FrontRow), I keep my tapes, and I own 0.7TB of hdd space for my 'actual' projects (yepp, the one from last year still needs some finishing...........)
as far as I understood the Library function of iM08, it would simplify your process dramatically, allthough you need tons of harddrive space..
haven't found until now any info, HOW the Library handles your footage, but it looks like, it indeed demands the original data, meaning 13GB/h ... (other apps/systems follow the strategy to create a low-res, preview only version of imports for a library/editing ... off-line-editing ... for final rendering, you have to 'insert' the raw material....)
... so, probably, you are the one for iM08 ..
last word: iM is by concept not meant to spread imports to many projects; that is more a priviledge of tools as FinalCutExpress, which handles bins etc. ...- but, FCE is little integrated into FrontRow ... (?)

What to do when SLS - Lion Server Upgrade & Migration Fail

Hi everyone,
I've had a tough time over the past week trying to updating my SLS to LS. (It was a slow week at the office so despite the warnings in these discussions I wasn't disturbing anyone, so I thought I'd try...) Both an upgrade to the current running system and a clean install on a wipe of that hard drive stall at the "Configuring Services" "Upgrading services" screen of the set up process. The migration path eventually fails, and as far as I can tell, it seems that the upgrade path just stays there forever.
Don't worry - I'm doing this all on a Super Duper! clone of my primary drive, so I can go back to SLS whenever I need to.
BUT, I can tell that the server's status is at least partially okay, even in this stalled setup state - iChat seems to work on various clients, and I can use Server Admin to see stats and services, etc.
So despite the discomfort of a failed install, part of me feels like I'll be fine with the LS if I can just figure out how to move my old data into the right places for the new system to use it. But I can't find any guidance for that. I'm looking to migrate OD (seems to have migrated fine), iCal, iChat, Address Book, Wikis, Time Machine, and File Sharing (which should be trivial to set up, I reckon).
Can anyone point me in the right direction?
Thanks very much,
Willhaus

Okay, so I've had some marginal success.
After leaving the hung install for a ridiculous amount of time (24+ hours), I realized that I could click the help button, and from the help window click the "further info about Lion Server" link to launch Safari. That gave me access to Software Update from the Apple menu, which then let me install the latest Safari update which conveniently enough requires a restart.
After restart, the Server Migration Assistant kicked in again, but failed quickly in the upgrading services stage. Another restart, and the sever finally booted more or less normally.
The strange thing was that although chat services worked fine during the hung install, all OD-related services stopped working after restarting. Turns out there were no users or groups in OD. Importing them from an OD archive, though, restored them.
So now iChat works great (even the old chat longs migrated successfully), and AFP is properly sharing our volumes across our studio's network. So our server is limping along.
The other services we need that aren't up yet are Wiki and iCal. Some info about those:
Wiki: administrators can log in and see all wikis just fine. That's awesome because it means the data migrated successfully. Any non-admin users can log in, but are then get a wiki-styled page that says simply "No wikis found". It's as if they don't have permissions to see the wikis, even though in Server.app they belong to the groups that the wikis are associated with. I've tried removing and re-adding users to groups, but that doesn't seem to do it. Any ideas how to fix this?
Calendar: While I can't get this to work, it's not like it's completely lifeless. An account in a client Lion iCal configured with the proper Lion settings returns an error that reads:
"The Server is Busy or Unavailable.
"The server at myserver.com is currently unable to handle the connection for account “ Calendars” due to a temporary overloading or maintenance of the server. If this continues you should contact the server administrator.
"You may try to connect to the server again or take the account offline."
As a logged in administrator, in a wiki clicking on Calendar in the nab bar goes to the calendar style page with an unending dialogue box that reads "Getting events from server". And clicking on Calendar from Home page footer takes me to the URL https://myserver.com/webcal with an error that says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Apache/2.2.20 (Unix) mod_ssl/2.2.20 OpenSSL/0.9.8r DAV/2 Server at myserver.com Port 443"
Again, at least I'm confident that the data migrated properly - I can find all the calendar data in it's proper new location - but either the service won't start or something's not configured correctly. I've tried chaining the hostname and restarting the service about a billion times. I've got no idea what to try next. Any ideas?
Thank you so much,
Willhaus

Dedicated Upgrade / Migration Tracks at OOW

Similar Messages

Maybe you are looking for