Default Action type when hire internal employee

Dear all,
How to set Default Action type when hire internal employee?
Thanks,

Hi,
May be that. When i transfer applicant that is hired internal, the action type is default Reentry into company. So how to change this?
Edited by: Quang Le Vinh on Nov 7, 2009 2:54 AM

Similar Messages

Reg: default file type when using 'WS_UPLOAD'

Hi,
Iam using FM 'WS_UPLOAD'.
my doubt is : If u don't specify FILE TYPE ....what is default file type it is going 2 take.
Regards
Vaja

Hi Sudha,
thanks for ur answer.
Plz look into this.
I have program with internal table declared as below with 2 fields.
when i specify the input file using FILENAME = P_FILE.....
the input file has only one field values(i.e. only matnr values).
So, I am getting error : "unable to load input file".
so my query is Can i specify input file with only matnr values and download into internal table (ITAB_MATNR--which has 2 fields)
DATA: BEGIN OF ITAB_MATNR OCCURS 0,
 MATNR LIKE MARA-MATNR,
 COUNT TYPE I,
 END OF ITAB_MATNR.
CALL FUNCTION 'WS_UPLOAD'
 EXPORTING
 FILENAME = P_FILE
 filetype = ftype
 TABLES
 DATA_TAB = ITAB_MATNR
 EXCEPTIONS
 CONVERSION_ERROR = 1
 FILE_OPEN_ERROR = 2
 FILE_READ_ERROR = 3
 INVALID_TABLE_WIDTH = 4
 INVALID_TYPE = 5
 NO_BATCH = 6
 UNKNOWN_ERROR = 7
 GUI_REFUSE_FILETRANSFER = 8
 OTHERS = 9.
IF SY-SUBRC <> 0.
 MESSAGE E699(PP) WITH 'Unable to load input file' P_FILE.
ENDIF.

Default PR Type when convert from Planned Order

Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
Andrew

Hi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM

Default phone type when adding contact

Hello,
Recently when I go to add a new contact, home is being selected as the default phone type. How do I revert this default selection beck to mobile? I know how to edit each contact, but I have 100+ to add and don't want to do that for each. Thank you.
Bryan

You're welcome.
You can send a feedback to Apple below:
http://www.apple.com/feedback/iphone.html

CS4 Set default file type when placing file

The File->Place dialog box has a default file type of 'Importable files.' Is it possible to set the default to All files (or anything else)? Making the change manually does not seem to stick. I have the same general question regarding File->Open. A search of the forums returned one hit (unanswered) in the Dreamweaver forum.
Thank you.
Dick Conrad

Peter:
Good question. One of our editors made this request, and I believe that he works with files that lack extensions. But controlling the default would also let us go in the other direction: quickly see only .rtf or .txt files, for example.
Any trick would be impractical if it lived in InDesign Defaults. All ID users get the same copy, and no two editors would want the same filter.
Thanks for your response.
Dick Conrad

Default valuation type when issuing material or Creating Delivery

Hi,
We have some material manage with valuation type X, Y, Z while creating PO we are entering Valuation type in PO as per requiremtn but i want that whenever we issue the material with 201 or creating delivery of that material with VL01N or VL02N default valuation type should be 'Y' so how to set this as default.
regards,
zafar

You will need to create a stock determination strategy and stock determination rule and assign it to the material master.
use TCODE : OSPX.

Default file type when save

When I use Pages to edit a word document ".doc", for every time I save it, Pages prompt to save as a new pages file, which is unnecessary. Can directly save to original file? TQ.

You get the designed behavior.
Pages is designed to be a .doc viewer,not a .doc editor.
Even if you use a free Office clone, you will get the same kind of behavior because for these clones, the default format isn't .doc but Text OGF whose extension name is .odt
Several times, I posted here a script which we may run to change a Pages resource so that it will behave as a .doc editor.
Go to my iDisk
<http://public.me.com/koenigyvan>
Download and apply once :
For_iWork:touchIworkPlists.zip
Yvan KOENIG (VALLAURIS, France) samedi 30 avril 2011 15:34:30
Please :
Search for questions similar to your own before submitting them to the community

Default Document type for ME21N

Hi,
I have lokked thru numerous posts on this issue but couldn't resolve. in IMG I blanked out default document type from NB and cleared Personal settings. Now the default document type is 'Dummy Purchase Order' which is first in the drop down list. Tried to maintain Parameter BSA = Blank. didn't work. Went back and checked the defaults in personal settings now instead of blank 'My Purchase Order' appears. Clear it again save it and check again it;s back in there. My objective is to have a blank in Default document type when ME21N is executed. Any help is much appreciated.
regards
Sim

Dear Parampreet kaur,
I know you can do this configuring the personal user setting once i've logged in the system. The drawback of this solution is that you've to config. this stuff for all users in the system.
You can do that clicking in a colored button in the top right corner of the screen.
I hope someone bring here a better solution then mine.
Regards,
Rodrigo

Default Access type is Open!

The default Access type when uploading a file is "Open",
which means anyone can access the file if they have the URL (or
guess it). Surely this should be "Restricted" until you decide to
open the file?
Or at the very least, an option in the preferences to allow
you the choice for the default?

Hi ,
Select that entire cell in the RTF template --->rightclick -->Borders and Shading --> Shading..
there you select the color you want...that will be applied to the excel tempalte output also
i checked its working....
Thanks.

RFID Fixed Device: Different action type

Hi Forum,
we are working with a fixed device.
The same "device group" could send via PML message different command:
- Tag commissioning
- Tag decommissioning
AII determines and execute the right "rule"
Unfortunately AII determines the same "action type", because in customizing ("Condition and rule --> Activities --> Assign action type to Device Group role") to the same Business Role/Doc Type we could assign just one default "action type".
How could we address different action type? Is there an additional field in PML message we could manage? Or ...?

Hi Paolo
There are two ways:
1.Maintain different device groups for different roles corresponding to different action types. Thus, in this approach it is not possible to assign different roles to same device group.
2. Alternatively, define one device group. To this device group assign ALL Roles. Now assign different action types to this AII Roles.
Also maintain the condition for fixed devices for different business processes.
Going by second approach you will be able to assign diiferent action types to one role (i.e. ALL Roles) under one device group.
The only problem with the second approach is, you wont be able to maintain the different location ids for different processes for the same device group.

Short Dump while executing New Hire (action type) in PA40

Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category               ABAP Programming Error
Runtime Errors         SYNTAX_ERROR
ABAP Program           /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time          21.08.2014 14:07:03
Short text
    Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
    include "/1PAPAXX/HDR_21000AO01 " in
    line 52:
    ""LV_LENGTH" has already been declared"
    The include has been created and last changed by:
    Created by: "HCM04 "
    Last changed by: "HCM03 "
    Error in the ABAP Application Program
    The current ABAP program "SAPFP50M" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    The following syntax error was found in the program /1PAPAXX/HDR_21000A :
    ""LV_LENGTH" has already been declared"
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP Release..... 731
    SAP Basis Level. 0007
    Application server... "dc-ds-erp"
    Network address...... "172.16.23.111"
    Operating system..... "Linux"
    Release.............. "3.0.13-0.27-default"
    Hardware type........ "x86_64"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "dc-ds-erp"
    Database type..... "ORACLE"
    Database name..... "ECD"
    Database user ID.. "SAPSR3"
    Terminal.......... "NLC-HP"
    Char.set.... "C"
    SAP kernel....... 720
    created (date)... "Sep 14 2013 06:16:24"
    create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
    Database version. "OCI_112, 11.2.0.3.0, V1, default"
    Patch level. 500
    Patch text.. " "
    Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
    SAP database version. 720
    Operating system..... "Linux 2.6, Linux 3"
    Memory consumption
    Roll.... 0
    EM...... 37708200
    Heap.... 0
    Page.... 106496
    MM Used. 4666776
    MM Free. 3709976
User and Transaction
    Client.............. 210
    User................ "HCM03"
    Language key........ "E"
    Transaction......... "PA40 "
    Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
    EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
    EPP Connection ID....... 00000000000000000000000000000000
    EPP Caller Counter...... 0
    Program............. "SAPFP50M"
    Screen.............. "MP000000 1000"
    Screen Line......... 3
    Debugger Active..... "none"
Information on where terminated
    Termination occurred in the ABAP program "SAPFP50M" - in
    "GET_HEADER_WITH_TCLAS".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 146
    of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
      EXPORTING
118
           DHDID                    = FHD_HID
119
           BEGDA                    = BEGDA
120
           TCLAS                    = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
*           MOLGA                   =
125
           P0001                    = P0001
126
           PERNR                    = PSPAR-PERNR
127
      IMPORTING
128
           PROG                     = HEADER_PROG
129
           DNUM                     = HEADER_DYNNR
130
       EXCEPTIONS
131
            HEADER_DEACTIVATED          = 1
132
            HEADER_UNKNOWN              = 2
133
            HEADER_GENERATE_DEACTIVATED = 3
134
            HEADER_GENERATE_FAILED      = 4
135
            INTERNAL_ERROR              = 5
136
            OTHERS                      = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
    HEADER_PROG = 'SAPMP50A'.
141
    HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL.                                   "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
    PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
    PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL.                           "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.

Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once!

Default date type for IT0041 in action

Hi,
I configure feature DATAR to set 01 as default date type for IT0041, but when I do hiring action, default date type will be 01,02,12.
Don't know where to change the default.

Hi,
Please verify if there is any dynamic action in table V_T588Z set-up for same which may cause override over default.
Also, verify if your DATAR feature is set up correctly for relevant country grouping and activated.
Thanks,
Ameet

OLM-Updating requirements for LP when person type changed to ex employee

Hi,
When the person type changes to Ex employee and enrollments still exists (which have not yet been completed) the following error message shows up.
USER DEFINED EXCEPTION IN PACKAGE OTA_DELEGATE_BOOKING_SWI PROCEDURE UPDATE_DELEGATE_BOOKING
when trying to update the enrollment status to Attend for those people who were part of a Learning Path subscription list. On other cases (employee is not a subscriber to a LP) the enrollment can be completed (Attend).
Has anyone experience this issue?
Best regards,
Roberto

Navigate to Work Structures -> Status and query for all rows with system status Terminated Assignment. select your required assignment status as Default. Untick the other default.

How can I change the default "file type" in the open file dialog when using Firefox on certain web pages?

I work for a bankruptcy attorney. We use the Court's file upload to file our documents. When I am on the Court's site and I have to pick a file to upload, the "open file" dialog box pops up. In Firefox, the default "file type" is always "image" files. I need it to be "all files". How can I change this setting?

Two observations.
First — "Tools-> ...." is specific to Acrobat X and XI. It did not exist prior to Acrobat X.
Second — Acrobat 9 Pro / Standard (nor earlier release) does not support viewing a PDF page containing a scanned image and performing a right-click ... Save Image As.
The context menu provided by Acrobat 9 Pro with a right-click on a scanned image is:
The context menu,from a right-click with the TouchUp Object tool selected, for Acrobat 9 Pro is:
So, to paraphrase what Paul Harvey used to say ... What's the rest of the story?
Be well...

How to set Lov item property (Action type,event,parameter etc) in PR when page load

Hi gurus
I am new to OAF, First I need to explain my scenerio.
I need to make some field mandatory or non mandatory based on one LOV item (Pick list or message choice list).
for this i extended the controler and apply the changes, but in this case what heppen, It will effect only when i open the list (pop list) and click on more (Available in poplist) and it will open a new form and i select value from that form. But when I open the poplist and select the value from the same list rather going to more option (it does not open new form), then there are no effect. I though the issue with refreshing when selecting value from the same list.
To resolving this issue what i did
1. go to page == > the same LOV
2. Change the Client Action properties (
     Action type = fireAction
     event          = xxevent
    submit = true.
After doing this when i run the page from my OAF enviroement , every thing is OK. Then I transfer the Controler to Server machine and change the controller and run the same page from the server, it has the same refreshing issue, Then I thought because I did not transfer LOV such properties so this is hepening,
Now I want to initilize such properties in Page load or what I need to do, Please advise me.
Regards,
Haq

Edward,
Thank you for the suggestion! It directly lead to my solution wherein I used CASE statements for the column in my Region SELECT such as the following:
WHEN (:P2_GRADING_METHOD = 'CR/NC' OR scs.scs_pass_audit = 'P') AND GET_GRADE_B93 (sac.stc_final_grade, sac.stc_verified_grade) IS NULL THEN htmldb_item.select_list_from_lov (5, 'Enter Grade', 'GRADE_LOV_CRNC','onBlur="return validate_grade(this,''FW_DATE_'||ROWNUM||''')"','NO',NULL,NULL,'GRADE_'||ROWNUM)
When the column is NULL, the Select List (LOV) contains the entry 'Enter Grade' and that is the value displayed on page load. I bypass the value 'Enter Grade' during Submit Processing where database updating occurs.
I did not find the need to enter values for p_null_value and p_null_text since I don't believe that it would cause the 'Enter Grade' value to display on page load for null value columns but rather would enable the user to select 'Enter Grade' from the list and have a specified return value stored in htmldb_item array.
Again, thank you for the help!

Default Action type when hire internal employee

Similar Messages

Maybe you are looking for