Default License Type in SU01

Hi experts,
We have recently had a change in our licensing agreement such that almost all of our users (approximately 99%) will be assigned to one license type going forward. With respect to creating new users with this license type, is there any way to default the license type in SU01, so we don't have to fill out this field every time (since all users will now be created with the same type)?
Thanks,
HC

Thanks. I had seen that and read it several times. I reread it again. It's still not what I'm after. It looks to be a work-around to not having USMM access and was not actually implemented. I have the needed USMM access.
Let me phrase my issue...
On Production, I start USMM. In the lower half of the screen, I slect the "Price lists" tab. Only the "SW Component Price List" is checked. The "Default User Type" shows "Operational."
I want it to be "SAP Business Warehouse User." Thus when new users are created through SU01 the new user creation process will not have to include changing the license type from "Operational" to "SAP Business Warehouse User."
Ultimately I just after having each new user created as an "SAP Business Warehouse User" when nothing is done through the SU01 license tab.
Bob

Similar Messages

License type change in ECC PRD

Hi All,
Currently all user id is being created in ECC system through HR trigger and default license type is mySAP ERP ESS User. but i want to create deterrent request type to up update license type from mySAP ERP ECC User to mySAP ESS Processional.
can you please help me how to configure to update license type.
Regards,
Arif

Hi Arif
Run transaction USMM in ECC. In there you set the default user type (license type).
The user types that show up or can be defined depends on the Price List selected.

User license type 53 - error "User type 53 is not active

Hi Experts,
One of our end user is facing this "User license type 53 - error "User type 53 is not active" issue.
Can any one help me what need to be done for resolve this issue.
Appreciate your early response.
Thanks in advance.
Sreenivasu Balaka

User Type 53 is:
53 mySAP Limited Prof. (Cat III) mySAP Business Suite Limited Professional (Cat III)
Check whether the active user types for both the user ids in these two systems are in sync or not. Also make sure that there is no wrong value is set in SU01 for the user id. Both system should contain same settings for company specific settings.. like ... Company address, Decimal Notation of users, Time Zone of user, License type etc. etc. ...
Check these things and let us know what you got.
fyi: User types can be activated in USMM..
Regards,
Dipanjan
Edited by: Dipanjan Sanpui on Jun 15, 2009 6:06 AM

Single document release - License type

Dear all,
We are facing an issue, when rechecking the old import documents which are assigned with License (Created with license type - single document release) are getting legal control block now. The license is not getting recognized for the document.
Before rechecking, the documents were not under any legal control block and the licenses (Single document release - license type) were recognized. What would be the reason behind this? What are the settings to be done specific to single document release- license types?
Kindly share your comments.
Thanks in advace!

Hi Balu,
It also depends on what option was selected when you had manually assigned the licenses to the documents in the past. If it had been B1 System, Manually changed, Cannot be changed by system. This wouldn't have happened.
Now as Aman said, you will have to reassign the licenses to those documents.
I personally feel there is a drawback for Purchase orders in terms of recheck.
Basically a document becomes not valid for re-check or re-determination based on following criteria
1) If its a sales order item- As soon as the order is delivered, the sales order becomes not relevant for check. Which makes sense as the subsequent document is generated. If you check the log, it would say Items not relevant for check.
2) If its an outbound delivery item- As soon as the delivery is PGI'd, it becomes not relevant for check.
3) But for Purchase order- The criteria is set as deletion indicator- Which means, a PO item is relevant for re-check in GTS unless and until it is deleted. Even if a delivery is generated for a STO line item, the PO item is considered as relevant for re-check. This had bitten me in the past.
If you don't remember the manual assignment option selected. Can you check the control settings for Legal control- your legal regulation and see what's set for Manual assignment default. If it's not B1, you may consider changing it.
Regards
Dhilipan

License tab in SU01

Hi All,
Can any one tell me regarding License tab in SU01 and how to use it, what type of license information should we enter in the tab. do we need to enter for every user?
Regards,
Sandhya

Hi Ch!
To answer your question Inactive users are not considered under license count.
All the users who are locked by system admin/locked by expiration are treated as inactive users who are not considered under count.
You can run tcode USMM on any of your system to analyze the results, it will do no harm make sure you dont submit results to SAP.
Also user classification/setting up license types depends on your agreement with SAP which can last 2 thru 5 years what I saw with my clients. you can get a feel of available license types under tab 'User Types' in tcode USMM.
All users with developer keys are shown in SCCR user list.
Note: If a user logon id is not same on systems, that user will be counted separately.
John Smith: jsmith, jsmith1,.... will be considered separate and counted.
Hope this helps!
thank you!

How to Change default format type in output device

Hi all,
I want to change the default format type from X_65_80 to another for all users.
Can anyone tell me the process.
Platform: SAP ECC 5.0 + Oracle 9.2.0.7 + HP UX
Thanks in advance
Regards
Eshwar

Hi Sam,
Thanks for the reply.
Where can I select the required format type as default for all reports.
I have checked in SPAD -> Extended Admin -> Device Types -> Format Types. But I did not find any option to set the format type as default for all reports for all users.
Regards
Eshwar

Interest on arrears default doc type

Hi all,
Can I set a default document type for interest on arrears calculation (F.2B)? If yes, where do I do that?
Thanks.

Dear,
Please go to OBV1/OBV2/OBV3 and from menu goto->doc type

Report generation for users having specific license type

Hi friends,
For my project purpose i have to generate report which has userId,License type of the user,corresponding composite role and single roles assigned to the user and transaction code.
I can get the report for user and license type from USR06 and roles,transaction from SUIM.
But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
Thanks in advance,
With kind regards
Karthick

> For my project purpose i have to generate report which has
userId,
License type of the user, TCode: USMM
corresponding composite role and single roles assigned to the user and transaction code.
1. Table: AGR_USERS, AGR_TCODES / USR08
2. SUIM -> a) Users by Complex selection criteria -> Execute -> Click on Roles => Full list of Roles per user.
-> b) Transaction -> Executable for users (all selection option)
>
> I can get the report for user and license type from USR06 and roles,transaction from SUIM.
>
> But I need a combined report of this. Is there any transaction code which helps me in doing this.Please let me know.
1. As mentioned by Saby: use TCode SQV1 to map all the tables with a meaningful "foreign key".
2. Download all Table contents and map them in excel by using functions.
Regards,
Dipanjan

Suppress the Default File Types dialogue, Office 2013 C2R

Hi.
We are doing a rather large Office 365 Proplus deployment using click-to-run via SCCM. We have the relevant group policys configured for the most part but we can't figure out how to get rid of the Default File Types dialogue box that pops up during the first
run of any of the Office applications. It asks the user if he/she wants to use Office XML or OpenOffice document formats.
When using the MSI-version and a custom install the administrator can answer this before creating the deployment package, but this is obviously not possible using C2R.
We have tried to set HKEY_USERS\<user_SID>\Software\Microsoft\Office\15.0\Common\General
/v ShownFileFmtPrompt to 1, but it doesn't work. We have also set the default file type for each application but on first run, the dialogue box still shows.
How can we achieve a simple deployment from a user perspective? The picture below is the setting we want to configure.
Best regards
Joakim

Dito. This should have been solved when Office 2013 launched and there's still no official solution?

How do you set/change the default alarm TYPE in iCal?

I like to think I'm a power user, but this one I just can't figure out. The question/problem is: How do you sent the default alarm TYPE in iCal? The problem is illustrated in the picture below in the blue circled area.
Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)." The one hour before is fine, but the problem is, WHAT is the default? It seems to be just a sound, but that's not good enough to actually alert me of anything.
The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful: I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound".
Any ideas, folks? Thanks.

Understand. I am in the edit mode for my contact. I see all the contact info. There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

Default Doc Type for PO

Hi Friends..
I need your help in solving a Puzzle in SAP.
I want to use ME59N automatic po conversion option for creation of PO from PR.Here PR doc type is NB-Standard, I want PO doc type to be my own doc type " CT3 " doc type. I have made below settings,
a.Activated Auto PO in VMR.
b.Activated Auto PO in MMR
c.Linked my CT3 doc type in SPRO.
But, when I tried to do default doc type settings in SPRO, SAP didn't
accept this Tcode (ME59N) & hence not successfull.
SAP is taking default doc type as NB & not tailor made "CT3" doc type.
Pl respond.
Thanks, VK.

Hi,
You hve done settings for Automatic PO, I think those setting are not required for you. Because your scenario is not Automatic PO.
In ME21N transaction you can do personnel settings with this whenever you run the ME21N tcode by default system will pick tht doc type as default doc type. This can be user based setting.
Hve you maintained the combination of PO document type and PR docuement type ? If you are using onli CT3 PO document type, assign this PO document type only.
In SPRO - MM - Purchasing - Define default Doc types maintain the defulat doc type for ME21N transaction.
Hope its clear, still if u hve questions let me know.
reg
Durga
*Assign points if the info is useful

Need to pull License type from GTS to R3 in case of STO documents

Hi Gurus,
Currently, In standard sales order process, we are using 2 functional modules in R3 to get the ECCN number and license type from GTS. This is required to populate on some billing output.
Functional modules used are:
/SAPSLL/***_DOCS_SD0C_FETCH_R3
/SAPSLL/***_DOCS_SD0C_GET_R3
Using above mentioned functional modules, we can only pull ECCN number and license type from GTS only if we pass sales document number to this FM and further system pulls ECCN and license type from GTS by referring the sales document number.
Issue:
We have a requirement is to pull the License type in case of STO documents also but STO documents/STO deliveries are not checked for GTS check, so we can not use above mentioned functional modules to pull the license type from GTS to R3 because STO/PO / deliveries do not exist in GTS.
I just have the material number with me and I need to pull the license type from GTS to R3.
Could anyone please advise the table name or any structure where i can pass the material number in GTS and can pull the license type to R3.
Your kind response would be appreciated.

Hi DG,
Thanks for your kind response. Regarding your second point, I am already pulling the ECCN number by using one customized functional module so I already have ECCN number with me. Could you please brief me how I can pull the License type linked to an ECCN number. What is the relationship table/ logic for pulling the license type by passing the ECCN number ??
Looking forward to your response.
Regards,
Anoop

Is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license

is it possible to connect Sqlfire server with oracle using DBSynchronizer using default license
Sql fire is my machine
Oracle is another machine
When i connect sqlfire with oracle using DBsynchronizer It shows the error message as Wan is not supported for default license
When i connect Sqlfie(my system) with oracle( another system) using JDBC Rowloader .nothing is happening after some time it shows the error like"time out for pool connection to archive database.When i increase the time out also nothing is happening.
what is the reason for above two errors(I stated in the pragraph.)
is it beacuse of wan netwrok not supported by default evaluation license?
could you please explain?

I don't think this has anything to do with a VMware product.

How can I change the default "file type" in the open file dialog when using Firefox on certain web pages?

I work for a bankruptcy attorney. We use the Court's file upload to file our documents. When I am on the Court's site and I have to pick a file to upload, the "open file" dialog box pops up. In Firefox, the default "file type" is always "image" files. I need it to be "all files". How can I change this setting?

Two observations.
First — "Tools-> ...." is specific to Acrobat X and XI. It did not exist prior to Acrobat X.
Second — Acrobat 9 Pro / Standard (nor earlier release) does not support viewing a PDF page containing a scanned image and performing a right-click ... Save Image As.
The context menu provided by Acrobat 9 Pro with a right-click on a scanned image is:
The context menu,from a right-click with the TouchUp Object tool selected, for Acrobat 9 Pro is:
So, to paraphrase what Paul Harvey used to say ... What's the rest of the story?
Be well...

CS4 Set default file type when placing file

The File->Place dialog box has a default file type of 'Importable files.' Is it possible to set the default to All files (or anything else)? Making the change manually does not seem to stick. I have the same general question regarding File->Open. A search of the forums returned one hit (unanswered) in the Dreamweaver forum.
Thank you.
Dick Conrad

Peter:
Good question. One of our editors made this request, and I believe that he works with files that lack extensions. But controlling the default would also let us go in the other direction: quickly see only .rtf or .txt files, for example.
Any trick would be impractical if it lived in InDesign Defaults. All ID users get the same copy, and no two editors would want the same filter.
Thanks for your response.
Dick Conrad

Default License Type in SU01

Similar Messages

Maybe you are looking for