Default opening location

Dear,
In the production departement we're installing a couple of machines with adobe reader.
We would like for them; when they open adobe reader and click "open" they always arrive at the same location (a network folder).
We cannot use the "last opened file location" since this is a subfolder of a subfolder,... and the users have no rights to change their registry.
We cannot have the browse the network for the pdf file, everything has to be done from within the application(s).
Is this somehow possible? If so; where can I find the registry setting / settings file?
info:
Windows XP & Windows 7
Adobe Reader X (some version, any version; not really important I guess)
Mvg,
Domien

Nope, you can't set that folder. You should just place a shortcut to the folder you want to use in the default folder Reader opens (My Documents, I believe).

Similar Messages

Changing default open file location

Hi all,
In Outlook 2010, is there anyway to change the default folder that is opened by explorer when you want to open any pst files?
I have tried the registry changes listed in other forums but this only changes the default save location. I have managed to change the default open location for Word, Excel etc but not Outlook.
Any help would be appreciated
Thanks

Hi,
Do you mean you want to change the default location when you click File > Open > Open Outlook Data File?
We can achieve this goal by modifying the registry, I managed to do this in my environment. Please follow the steps below:
Note: Serious problems might occur if you modify the registry incorrectly. For added protection,
back up the registry before you modify it.
Locate the registry path:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook
Add the ForcePSTPath registry value:
Value name: ForcePSTPath
Value type: REG_EXPAND_SZ
Value: path to your storage folder
Restart your Outlook to check the result.
For more information, please refer:
http://www.msoutlook.info/question/370
Regards,
Steve Fan
TechNet Community Support

Failed to save the PDF file into the open location as default

Hi all,
Please help me!
In Acrobat XI professional, while save the PDF file using the SAVEAS option it shows the previous file saved location path.
But i need the current opened location path while save the PDF file.
Please help me to solve the issue.
Regards,
JayaKrishnan

What an awesome idea, Bernd...
I've just encountered the same situation and it's irritating the hell outta me. Adobe's always gotta screw something up to irritate us. As if having the rent their software isn't irritation enough.
The problem is when you open a file and then Save As it has always, and in every program known to man (at least that I've used), offered to Save As in the same folder where the file was opened from. Now it wants to save it in the last "saved to" directory.
While this could be convenient on occasion it's a PitA most of the time.
Any actual solution to this misbehaving Save dialog?

SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.

Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS CSE Policy
        Windows SBS Client - Windows Vista Policy
        Windows SBS Client Policy
        Update Services Client Computers Policy
        C-Create Syntiro Root Folders
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
        Windows SBS Client - Windows XP Policy
            Filtering: Denied (WMI Filter)
            WMI Filter: Windows SBS Client - Windows XP
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        OPTI9020-01$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS User Policy
        Windows SBS CSE Policy
        Small Business Server Folder Redirection Policy
        U-Word 2013 Default Save Location
        U-Office 2013 Disable Backstage
        U-Office Disable Start Screen
        U-Office Trust Center Settings
        U-Word Autorecover Location
        U-Word Autosave Interval
        U-Word Disable Capitalization First Word
        U-Word Set Arial Default Font
        U-Word UI Customizations
        U-Power Plan Settings
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        Windows SBS Link Users
        Windows SBS Fax Users
        Windows SBS SharePoint_MembersGroup
        Windows SBS Folder Redirection Accounts
        Windows SBS Remote Web Workplace Users
        High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

Changing the Default Save location in Cap4

I know its possible to change the publish folder (Edit > Preferences) but what about the default Save location? Any clue how to change that from My Documents?

Hi again
Ouch! Not the network!
One of the hard learned issues that folks are unaware of until they encounter problems is that Captivate does not do well when a project is stored on a network. It's fine to keep projects there in order to back them up or as a transfer pivot location to allow others to edit, but you never want to open Captivate, click File > Open and browse to a network location to open a project for editing.
Best practice at this point is to keep projects on your local C drive when you make edits.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

How to set default file location in Illustrator?

I'm using Creative Suite CS5 in Windows Pro 64, and would like to set a default location for files in Illustrator and Photoshop when I execute the File > Open or File > Save commands.
Yes, the program defaults to the location of the last file opened, but sometimes that file is gone, or I'm creating a new one from scratch, and the program looks for files in a distant place in my file structure.
** Is it possible to set a default file location for opening and saving in Illustrator CS5 (and in Photoshop CS5)?
Thanks.

Not that I know of. It simply reverts to the global "My Documents"/ "Documents" folder as provided by your operating system. these can of course be changed using variables and editing the Windows Registry/ Group Policies, but that affects all programs...
Mylenium

Could not open location 'file:///home/geoff'

I'm using Gnome and after the last update today ( I always do pacman -Syu everyday and accept whatever it gives me in my noobidity ):(
Now I find that when I go to Places--Home Folder and Places--Desktop I get this message.
Could not open location 'file:///home/geoff' (or 'file:///home/geoff/Desktop')
There was an error launching the default action command associated with this location
Have I done something stupid in accepting all updates without question? Or is it something else?
Can you put me on the right learning curve and fix this.
Thanks

I think that the latest udev upgrade has caused the problem. Correct me if I'm wrong.
I did the same upgrade on my laptop and got the same fault.
Apart from the faults in my previous message if I open a terminal over any page I'm looking at, like this for instance, it will not stay "above" the page when the box "only on this workspace" is checked. I have to check "always on top" to make it stay so I can cut and paste things.
When the terminal is minimized in the bottom panel and I click on it, it comes up but the moment I move the mouse pointer to the terminal screen it disappears back to being minimized.
I've never had this weird behavior before.
Hoping someone can help
thanks

Setting project default file locations and a few random interface questions

I apologize for the randomness of this post, but it seemed better than spamming a bunch of different posts in a short period of time. I've been using Premiere Elements 9 for about 6 months now and there are a few little things that I'd like to tweak.
I'd like to change the default file save location for a project. I've got different projects in different folders and it seems like I should be able to set a default save location for each project. All I've ever been able to find in the help is how to set the scratch folder, which is different.
I'd like to change the default encoding preset for a project. For example, I have a custom preset for mp4 under the mobile phone category. It would be nice to have that be the default whenever I pick the mobile phone category.
With birthdays and concerts and plays and all that stuff I have about 50 videos and a couple hundred large photos already. Every time Premiere loads, it takes a few extra seconds to load up all of the thumbnails. I hide all the videos and pictures on the Organize tab and save the project, but it never sticks. Is this just impossible?
Finally, every so often, the end-of-clip marker acts funny. I don't know what the proper name for it is, but it is the thing under the mouse cursor in the picture below. It used to automatically move on the time line as I added or deleted clips. Somehow I clicked a button and it no longer does that. After a week or so of not working, it goes back to automatically adjusting as I add and delete clips from the timeline and then it will break again. Ideas?
Also in the timeline, I now have this huge gap of nothingness on top of video 1, see picture. My ocd says that Video1 and Audio 1 should be at the very top and the gap should be on the bottom. Ideas?
Thanks,
Bob

I kind of wish you'd have spread these questions out over a couple of posts so that we could answer each thoroughly. If I answer all of them in depth in a single post, this answer would be the size of one of my books! (which, by the way, contain many of the answers to these questions.)
1. The default save location for your videos should be the last place you've saved your video to. So that should happen automatically. Although in my books I recommend that, whenever you start a new project, you create a new folder for it. This is good housekeeping and a good way to keep your tmp and render files in the same place on your drive, which has a number of advantages.
2. You can't create a custom project preset. The only presets available are the ones Adobe provides. And, although they are pretty extensive, some non-traditional formats (like video from some mobile phones) are not well supported. You may be able to get it to work -- but it's usually a hybrid solution and, personally, if you plan to use your phone's video as your main video source, I'd recommend you look at another video editing program. Premiere Elements doesn't do the hybrid stuff well. It's ideally suited for video from traditional camcorders.
3. The thumbnails you see when the program loads are not in your current project. At least not until you import them into your Project panel. That Media panel is merely a preview to what's in your Organizer catalog. As I explain in my book, it's usually best to ignore this panel until you really learn your way around the basics of this program. It's very confusing. Fortunately, it adds very little load time to the program itself -- regardless of how much time it seems to add.
4. The thing in the illustration is the Work Area Bar. It's used to isolate a segment of your timeline for rendering, etc. Usually, it will shrink and grow as you add and remove video from your timeline. Unfortunately, there's a bug in version 9 and, if you manually change it once during a project, you'll have to manually change it for the rest of the time you work on the project. But, if you drag each end of the Work Area Bar to cover your entire timeline of videos, your project shouldn't misbehave.
5. The "gap of nothingness" on your timeline is just room for you to add more audio and video tracks if you'd like to. It's a good thing to have! BTW, as I'm sure you know (and my books, once again, explain) you can toggle the tracks on your timeline so that they display as either compressed (as in your illustration) or wide open, which allows you to see your clips and control audio and video levels. Once again, this is a very good thing!
Happy moviemaking.

Moved media to TC. Now itunes keeps changing default library location

I realize this might be better suited in the iTunes discussion forum however...
I recently purchased a time capsule and moved all my media to the new drive. I changed the default library location in preferences. Problem is, every time I quit and relaunch iTunes, the default library location reverts back to my old location on my mac. Any ideas how I can get iTunes to remember my new default location? It's as if it's picking up a location file somewhere that is telling it to create a new library on my mac's hard drive.
Thanks for any input.

I don't have a TC but I also keep my iTunes library on an external Firewire drive and the following is the behaviour. Maybe it's so for you too:
• When the firewire drive is mounted on the desktop and I open iTunes, iTunes will link back to the library on the firewire drive.
• When the firewire drive is unmounted and I open iTunes, iTunes preferences will revert the library to default back to the internet drive.
• BUT, when I remount the firewire drive, and open iTunes again (after it's been closed), iTunes preferences will automatically go back to linking the library on the firewire drive.
So in short: when unmounted, iTunes links music library to the original default which is the internal drive. When mounted, iTunes will automatically relink music back to the firewire drive.
Does it work like so for iTunes on Time Capsule?

11.2.0.3 ORA-28353 using default wallet location

Oracle 11g R2 11.2.0.3
Windows Server 2008 R2 Ent SP1 64bit
I receive ORA-28353: failed to open wallet when attempting to create a new wallet in the default location (no ENCRYPTION_WALLET_LOCATION defined in the sqlnet) using alter system set encryption key identified by "password1!";. I have confirmed my ORACLE_BASE as c:\oracle and have manually created the wallet directory c:\oracle\admin\<SID>\wallet.
I have two databases referencing the same ORACLE_HOME. I want two separate wallets for these databases. I do not want to manage multiple sqlnet files and would prefer to let Oracle manage the wallets from the default location.
I have seen older posts referencing a 64bit OS bug that was supposedly fixed in 11g R1 (I believe). Is it possible that I am running into the same issues? It works fine for one database if I specify the default location in the ENCRYPTION_WALLET_LOCATION in the sqlnet.
Any advice in getting Oracle to use the default wallet location to manage wallets from would be appreciated. Thanks in advance.

Hi,
Thanks for this.
This solves java permission error.
However, now get another message when trying to run the repository_upgrade
ERROR at line 1:
ORA-29532: Java call terminated by uncaught Java exception:
java.lang.NumberFormatException: For input string: "nul"
ORA-06512: at "OWBSYS.WB_RTI_UTIL", line 287
ORA-06512: at "OWBSYS.WB_RT_SCRIPT_UTIL", line 885
ORA-06512: at line 4
Any ideas how to solve this one?
Thanks

Default Saving Location Adobe Reader Version 11.0.1

Default Saving Location Adobe Reader 11.0.1 -
Since upgrading to Reader XI the default saving location no longer works. So esssentially in previous versions The file path would default to the last place you saved a document, so when saving multiple documents in the one file path it wasn't time consuming.
Since upgrading it does not do this anymore and you have to select the file saving path each time you open a new PDF, which adds to the time to save multiple documents, so currently I guess it just opens a temporary folder each time you select Save As.
Can you please advise the setting that needs to be altered to fix this.
Thanks

Thank you. We have tried that but it has not made any difference. Adobe still requires a new file name to save the file.

Default storage location setting

Hi,
how can i set the default storage location.
I need to reflect it autometically while booking any order.
Regards,
Rajdeep

Hi Rajdeep,
there are quite different ways to achieve this,
- If you are open for enhancement, then write the piece of coding to default the storage location in Includ:MV45AFZB under
USEREXIT_SOURCE_DETERMINATION which could be applicable for all doc types or set of doc types/ item cat's
OR
- You can achieve the same requirement with Transaction variant in Tx:SHD0 while recording enter this field manually & at the time of save , save it as "with content" & assign this variant in order doc type details in VOV8.
then whenver you create sales order using this doc type, storage location will be defaulted. ( assumption is - you have single storage location which has to be defaulted in order)
Hope it helps,
Regards,
ReazuddinMD

Using OneDrive as default save location for project

I installed VS on 2 different computers and want to develop from both of them at times. Either my desktop of laptop. Therefore I want to store the project files on the Onedrive folders that are mapped on my local machine.
I have changed the default save location for Projects and also the other Registry Settings in HKCU... to onedrive/projects folder. But once I create the project from on PC and try to open it from another I am getting the following error.
the file xxxx.csproj : error : The project file could not be loaded. The filed cannot be accessed by the system.

Hello waddat,
I haven't test this issue about onedrive mapped folder. But may I ask this question: Does the location exist in your PC or is it just a mapped virtual drive?
In my point of view, when you tried to open a project from your folder, it is possible that the file is being used by onedrive synchronous process. Or Visual Studio cannot find the specific file because the file has not been uploaded/downloaded to the path
you want to search?
I don't recommend you set the default location to OneDrive folder, it is not reliable for you to do this because the synchronous process of OneDrive is not certain by us.
If you want to store your projects online, the recommend way is to use Visual Studio Online
http://www.visualstudio.com/en-us/products/what-is-visual-studio-online-vs.aspx
If you want to store projects using OneDrive, please try create your projects on local drive and upload your file to OneDrive and then download it from some other sides to us. I think this is the best practise for you.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I permanently change my default import location in LR 3.5

I am trying to change my default import location on my MAC Pro Tower, to one of the internal HD's. I have named the HD Photo Location, and have created a folder in it called it "My Lightroom Photos". I have been able to create this, but cannot seem to ber able to make it my default when I open LR 3.5. I have to manually go in and change it. Is there a way that this can be changed to make it my default?
Thank you.

Up to now we were talking about the Destination Folder which can be saved as part of an Import Preset.
You are talking about the Source Folder.
I tried what you did with the "Add" function. The source folder that I had selected previously when I saved the preset was not highlighed when I selected the preset.
It seems that the Source Folder is not part of the saved preset. When I select a different source folder (still in the "Add" function) , the name of my preset remains unchanged.
When I select a preset in the "Move" function and change the destination folder, the name of my preset changes to "something, something (edit)".
This behaviour would support my idea that a source folder cannot be saved as part of a preset.
So in the end, if you do not want to import into LR by copying or moving the images from the memory card you'll have to live with having to select your source folder on each import.
When you select Copy or Move the memory card will be detected by LR automatically and will be highlighted. And in >Preferences >General Tab you can also get LR to show the Import Dialog when a memory card is detected.
WW

Premiere Pro CS6 Default save location

Hey there,
We are having an issue where our users only have 100 meg network drives and Premiere Pro CS6 profile data. Our domain policies redirect everything from XP Documents and settings and 7 Users to their Z:\ drive, which is mapped to a network location on the local server . When Premiere Pro first opens, it saves user specific profile data and save files by default to this location. When their drive reaches full, it will then corrupt a .DB file in this location (no space for a proper save) and then causes problems in various other sections of the program, such as importing videos/photos. You can manually select a different location on project start, but is there any way to redirect it back to the local drive users folder? These files then will have lots of space and then they can save their project file on network drive/flash media so their work is secure and safe, but the program data and scratch info has lots of free space to work with? I need to make this change permanent and inside of a deployment, is there a registry file one can change?
Thanks!

Last point here:
I thanked everybody for useful comments,
Theres no point in arguing what a company should do at the end of the day, they will make things work swimmingly or crappily regardless, cash is king.
Presently, no priviledge user accounts on the network are working peachy, not the problem. Only when the network drive reachs full does this have any issue or problem at all. Basic users with much larger network drives (such as an instructor) have no problems. *shocked crowd noise*
The point honestly is to not argue any present facts, would i like things done differently? sure, but right now none of that matters.
as we circle back around to the only main point and the only real question i had was this:
I just needed to change the default save location of premiere pro, if the program wont do this, how do i make it work or hack it to work? I of course take on all associated risks with this or running the program in the evil basic user network saving configuration.
At the end of the day, i was trying to do what you guys wanted, I wanted to have it save to C: for program caching. Users can then save the .proj files any where they wish after, doesnt matter. Im not wanting it to save to the network, group policies are just setting that default location to the network first program start. They can change it themselves even as a basic user, i just wanted to change where it goes first. I could give them Administrative access and that wouldnt change anything. Changing the group policy isnt the option, i cannot fix PP Pro and then break HUNDREDS of other things. These machines do far more then PP Pro.
I am listening, we just for some odd reason keep bashing pointless side points to this issue. All i needed to change was this default location for everybody.
Who cares if its on the network, a USB, the C drive, D drive, E drive, F drive or whatever the hell, if you dont think it will work off of C, thats fine, great, good for yah. I JUST need to change it. Thats all. The risk is on me, *Kermit YAAAY!*
So I am listening here, some people need to try READING though. Just because a program isnt designed that way, doesnt mean nobody has ever figured out a way to make it work that way. Welcome to Information Technology or Software Packaging and Deployment. There are websites dedicated to this.
Thanks again, ill ask Adobe support.

Default opening location

Similar Messages

Maybe you are looking for