Default Profit centre not picked up

Hi,
Document splitting is activated. Now i have assigned one bank account to one profit centre '1210' in tcode 3keh
I am posting customer receipt. Customer is in profit centre '1100'
I have defined zero balance clearing account - 20010010
Now when i posted receipt entry,
i was expecting the entry:
Bank A/c Dr (Profit Centre: 1210)
Zero Bal A/c (Profit Centre: 1100)
   To customer account (Profit Centre: 1100)
   To zero bal A/c (Profit Centre: 1210)
But the entry passed was:
Bank A/c Dr (Profit Centre: 1100)
   To customer account (Profit Centre: 1100)
Profit centre of bank was changed inspite of givin it in 3keh.
The above entry is perfectly passed in sandbox, but not in test client. I have compared the settings and its same.
Tell me what may be settings which is missed by me.

Use TCode: FAGL3KEH & not 3KEH for defining default profit centre

Similar Messages

  • Default profit center not picking

    Hi
    I am using document splitting and i assigned some Balance sheet accounts to the profit centers in FAGL3KEH. But that GLs are not picking the Default profit centers. I also tried in 3keh but there also not able to do.
    Can anybody tell that where i am going wrong.
    Thanks

    Hi,
    3KEH is for old PCA so if you use NewGL FAGL3KEH is the one to be used.
    If your test posting contains another profit-center than the one defaulted in FAGL3KEH check where it comes from, because FAGL3KEH PRCTR is only used if no other profit-center information for the line item can be found.
    Best regards, Christian

  • Profit Centre not picking in customer and vendor line items

    Hello
    When we are posting the entries for customer and vendors and when i want to check the balances of customers & Vendors profit center wise it is not showing any balance but if i will check the same transaction in the P & L A/C it shows me the balance there Profit Center Wise
    Can we please tell me where i have to maintain the settings so that i can get the balances of customers and vendors Profit Center Wise
    Sunil

    Hello,
    Unless you are on New GL with document splitting functionality, no items on vendor and customer will be posted with Profit Center.
    You run 1KEK periodically to transfer the receivables and payables to PCA.
    Regards,
    Ravi

  • Profit centre not displyed in Customer balance

    Hi
    while executing the FL5N Customer line items the profit centre filed is blank.The profit cenre column is there but not displayed. profit centres
    Please what to do if we want to diplay
    Regards
    Arjun

    If you are on new GL, then go to Financial Accounting (New) -> General Ledger Accounting (New) -> Business Transactions -> Document Splitting -> Define Document Splitting Characteristics for General Ledger Accounting in IMG and add an entry for Profit Center.  System should then automatically pick up the profit center from the revenue line item (when you post GL document) and insert it in the customer line item as well.
    If you are not on new GL, then I don't see any option other than making the profit center available for input in the field status group assigned to the reconciliation account of your customer and entering the profit center when posting the accounting document.
    Assign pts. for useful answers!

  • Interest doc posting with default Profit Centre.

    HI all
    While calculating interest on customer from T.Code F.24, we need to post the documents by executing the relevant session at SM35. 
    at every document system asks for Profit Center to be entered manually.  We want this to be automated.  system to pick up the one common Profit centre for interest Revenue GL account. 
    Request your help how I can achieve this.
    Note:  I have updated at T.Code OKB9 and at T.Code 3KEH, but both are not woring for revenue GL account.
    Thanks in advance
    reg
    S. Habib pasha.

    Hi,
    U can use subsititution and specify that the profit center could be your head office or the store as per your req...
    I think thats the only option we have..
    Cheers
    Raghu

  • Default Profit Centre for PP Order Through CO07

    Hi
    We create production orders without material i.e CO07 for rework orders. My question is i want to default one profit centre for creation of this kind of production order as users tend to forget to put the profit centre as it is not coming as default fro materail since there is no material involved. Can anybody guide is there a way to do this?
    Thanks in advance
    Kind Regards

    Dear ,
    You need to linked this through the activity type assinegd to re-work activity in Production Work Centre .U can create an Re-work  work Cnetre and assing this work centre in Reference Operation set  and creat the Re work Production Order .The activity type assinged to this cost centre and work centre will be internally linked in profit centre .
    Or create a dumnmy material with Profit centre assinged in Costing 1  , Create  Rework Order in CO07 .
    Regards
    JH

  • New General ledger accounting in ECC 6.0 : Profit centre not in BSID table

    hi,
    I already create new transaction code and report from standard transaction code
    *s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items)* and i
    also add Profit center fields into Dynamic selection.
    My problem is, if i run the report using customer account the output is displayed but
    if i run the report with customer & profit centre the output is not displayed. currently i'm using
    new General ledger accounting in ECC 6.0 and when i look into bsid table the value
    is empty for profit centre and the value for profit centre are stored in new table
    FAGLFLEXT.
    do i miss something?
    thanks.

    s_alr_87012168 : Customer Aging Report (Due Date Analysis for Open Items) this is a report generated.

  • Profit center not picking correctly in PO from sales order

    Hi Experts,
    Profit center is not picking correctly.. in PO
    In material master Profit center is configured as XXXX
    We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
    There is one purchase requistion for the same material with two line items
    But  we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
    In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but  in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
    What could be reason ? Help  in this regard will be highly appreciated.
    Thanks in advance
    Narayanan

    Hi Narayan
    Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
    It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
    Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
    BR,Ajay M

  • Balancing field profit centre not filled

    Hi all,
    The transaction Iam trying to post in FI directly.
    The entry I am posting is
    Dr Cash 1000
    Cr Sales 500 PC X
    Cr Sales 500 PC Y
    I want the cash account to be split with PC X 500 and PC Y 500. I am getting the error. balancing field profit centre is not filled in line item 001.
    Can some one please guide. I have assigned cash account with item category 04000 and the document type Iam using is with unspecified category.
    Thanks
    Aravind

    Hi Vineet,
    Thanks for the reply. Let me summarise you what I have done.
    1. Document splitting is active in the system.
    2. Profit centre and segment scenarios are mandatory
    3. Zero balancing clearing account has been defined.
    4. Item category assigned to cash account is 04000.(Cash account)
    5. Item category assigned to sales account is 30000(Revenue)
    6. A new document has been created which is YV and is assigned with transaction variant 0000/0001.
    7. Inheritance check box ticked in level of detail.
    Please revert in case if further details are required.
    Thanks
    Aravind

  • How to default Profit Centre For particular user

    Hi All,
    plz tell me how to default the profit centre for different-2 users.
    Thanks &  Regards.
    Manoj S

    If u defined profit centres,Add Costing code field using form settings for marketing documents.
    Apply formatted search using query(Develop 2 queries for users with reqd. plants)
    Below sample query assign our own plant codes.
    SELECT T0.OcrCode, T0.OcrName FROM OOCR T0 Where T0.OcrCode IN ('East','North','South')
    In journal entry,U need to enter plant manually / Use form settings Document tab --->Table Tab,
    Enter plant there,It will copy to all rows.

  • Two locatization Company ( UK/CHINA) profit centre not same )

    I dopn't know why our locatization company ( UK. \ CHINA ) company profilt cntre inside feature not same.  pls advice how checka and change.

    UK uses version A and China uses version B. Yes, the profit centre feature is different between this 2 version. Version B is a bit more detail as they have multidimension function. I don't think there is way to change them. However, I believe they standardized this feature in version 8.81 for all localizations.

  • Profit Center not picked in Payment documents

    The problem concerns incoming payment with clearing invoices, in the same time, the profit center is
    not taken automatically from invoice to payment document. How can the same be achieved.

    Dear Sir and Madam.
    the configuration Team has to Enable the concepts on Profit Center that can be able to Pick,.
    They enabled the Cost Center are Bus area.
    Please Check this two is Active that is not required to get the reports
    Thanks and Regards
    N,.Soma Sundaram

  • Dummy Profit Center not picking correctly in PO

    Dear All,
    PO was cretaed withAccount Assignment Y (Y-account assignment for Balance Sheet accounting) and without material.
    But in the PO dummy profit center 999 is getting picked up .Ideally profit center RT3 should be picked.This gets updated in EKKN table.
    please let me know your thoughts why the Dummy Profit Center is getting Picked up.
    Many Thanks
    Shyam

    Hi,
    Check in the Material Master in General Plant data/ stor 2 tab the dummy profit center is assigned or not
    Best Regards,
    Silky

  • Document Splitting-Balancing field "Profit Centre"

    I am trying to post an F-02 transaction as follows:
    Salary & Wages   1000     Dr.   Cost Centre(A) & Profit Centre (A)
    Salary & Wages  1000     Dr.   Cost Centre (B) & Profit Centre (B)
    Salary Payable    2000     Cr.   
    But when I tried to post it, the system is showing the error that "Balancing field Profit Centre not found in item 3.
    I am expecting that the item-3 as above should be split and inherit the profit centre information.  However, the document is not split and the system is showing the error.
    I cannot assign a default Profit centre to the item -3 .  How can I reslve this error.  Document type used is SA and it is 'unspecified posting' in the Document Spitting method 0012.
    Please help out.

    Dear,
    Nikitha.
    Isn't your system asking you profit center as your mandatory field ? If it is so just put your enter your respective profit center
    and simulate the entry. ( In some cases enter your cost center system will catch assigned profit center from CC try out )
    Follow the following path :-
    IMG --- FA NEW -
    General Ledger Accounting New --- Business Transaction -
    Document Splitting -
    Define Document
    Splitting chracteristics for General Accounting.
    Here is your PRCTR is defined mandatory.
    If you untick it your system will allow you to post the document. But listen if you have activated segment also with that.
    Your reporting will be of no use and result void.
    In the SAP best practices it is said dont untick it if you have posted documents with same activated functionality
    By unticking your profit center wise & segmental reporting will be of no use.
    or do one thing go to down side of the same path a little you will see one transaction as Edit constants for non assigned
    process select your constant and double click on assignment of profit center maintained there default profit center or
    maintained dummy profit center 9999. Now your system will pick this profit center 9999 or your mentioned one
    as your default profit center.
    Or one more else thing you can do is by posting key make your profit center optional through its posting key's field status
    group.
    Hope this helps you to solve your issue.
    Please revert back for further clarification.
    Regards,
    Pankaj.
    Edited by: pankaj_ab on Nov 24, 2009 12:45 PM

  • Error - Balancing Line Item Profit Center not filled in Line Item 007

    Hi
    I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
    Regards
    Vaibhav

    hi  vaibhav
    you go through this Tcode  FAGL3KEH  and maintain default profit centre. in the  error message system shown GL accounts
    hope you userstand
    thanks
    dharmendar

Maybe you are looking for