Profit center not picking correctly in PO from sales order
Hi Experts,
Profit center is not picking correctly.. in PO
In material master Profit center is configured as XXXX
We have raised a sales order for the same material with two line items (e.g) 1500 kgs & 1600 kgs and profit center has been changed in the sales order to YYYY
There is one purchase requistion for the same material with two line items
But we have raised two purchase order for each line item in which the same sales order is linked to these two purchase order.
In the first PO , for the first line item in sales order ie., 1500 kgs profit center is picked from the sales order ie, XXXX which is correct but in the second PO, for the second line item in sales order ie., 1600 kgs profit center is picking as YYYY ie which is configured in material master.
What could be reason ? Help in this regard will be highly appreciated.
Thanks in advance
Narayanan
Hi Narayan
Check the Account assignment in the 2nd PO.. Does it have E as Acct Assgn Category?
It should have sales order as the account assignment... If yes, then it must pick up PC from the sales order...
Try to put a deletion flag to this PO and create a new one, if possible... You would come to know if some one has changed the PC
BR,Ajay M
Similar Messages
-
Dummy Profit Center not picking correctly in PO
Dear All,
PO was cretaed withAccount Assignment Y (Y-account assignment for Balance Sheet accounting) and without material.
But in the PO dummy profit center 999 is getting picked up .Ideally profit center RT3 should be picked.This gets updated in EKKN table.
please let me know your thoughts why the Dummy Profit Center is getting Picked up.
Many Thanks
ShyamHi,
Check in the Material Master in General Plant data/ stor 2 tab the dummy profit center is assigned or not
Best Regards,
Silky -
Liquidity Report not picking up Noted item and Sales orders
Hi Experts,
I created planning levels from source as PSK, yet the liquidity is not picking up these items from sales orders and purchase orders. Also while creating noted items, i have given planning levels in the configurarion and the same is not picking up in the liquidity too
Please advice
Thanks in AdvanceHi Hien,
We have created planning levels separately for MM and SD and we have created under SDF and MMF respectively.
IT is working for group created for direct FI entrly and linked the same with PSK and the same is working fine.
I am new to FSCM. Can you please elaborate FDFD?
Thanks and Regards -
Profit Center not picked in Payment documents
The problem concerns incoming payment with clearing invoices, in the same time, the profit center is
not taken automatically from invoice to payment document. How can the same be achieved.Dear Sir and Madam.
the configuration Team has to Enable the concepts on Profit Center that can be able to Pick,.
They enabled the Cost Center are Bus area.
Please Check this two is Active that is not required to get the reports
Thanks and Regards
N,.Soma Sundaram -
Default profit center not picking
Hi
I am using document splitting and i assigned some Balance sheet accounts to the profit centers in FAGL3KEH. But that GLs are not picking the Default profit centers. I also tried in 3keh but there also not able to do.
Can anybody tell that where i am going wrong.
ThanksHi,
3KEH is for old PCA so if you use NewGL FAGL3KEH is the one to be used.
If your test posting contains another profit-center than the one defaulted in FAGL3KEH check where it comes from, because FAGL3KEH PRCTR is only used if no other profit-center information for the line item can be found.
Best regards, Christian -
Profit center report picks production variance posting from prev periods
(This is a repost, from a ill-chosen forum)
Guys I am lost
I am running S_ALR_87013340 : profit center Plan Actual comparison report, on a group of profit centers: the total I got is different from the sum of the individual profit centers in the group: the difference being on my production variance account, and a sales posting that relates to the prior period
I had the same issue last month, with the discrep. only being my production variance account.
but I was expecting something of the sort: it was the first time we closed orders, and SAP closed all orders since the implementation, years earlier
What could cause this?
Thanks for your time, again
KR - LoïHi
The Production Variance account is usually not created as a Cost element.. Hence, the PC from the Mat Master is derived into this Line item.... Ideally, the PC from mat master gets copied into the Prod order also... If you change the PC in mat master later on, you can see a mismatch
Whats the situation in your case? The Prod Var account has PC or not or which PC does it have?
Br, Ajay M -
Need Profit centre field as mandatory field in the sales order
Dear All,
Normally Profit center data maintained in the material master, same data will get coipied to the sales order while creating sales order in VA01 transaction.
My requirement is if profit center data is not maintained/available in the sales order system should give the error message
For this I need Profit center field as mandatory field in the sales order(VA01).
Can you please give possibilities ASAP.
Give the SHD0 maintenance step by step.
Regards,
Murali.Hi Murali
I beleive that you are talking about the Profit centre field not maintined in sales order hence not picked in delivery and billing and there is an FI posting error (GL account error) because of that
Profit centre is maintained in MMR and the same flows thro the sales cycle and i am quite sure if maintained in MMR it will be picked automatically and no need to make it mandatory in sales order( as the purpose is already solved)
But there is no standard option in SAP like (even if Account assignment category of the material is not maintained in MMR it can be given in VF02 and the document can be released for accounting) to give the Profit centre in the billing and release the same
Profit centre field field is picked from masters and flows in the entire flow and that field is greyed out (like no option of inserting it inbetween)
As told by others incompletion log in sales doc type will take care for future orders and for the already created orders the standard option is cancel billing, reverse delivery and open the sales order and give Profit centre field and process it (if only a few orders are there)
But if the already created orders are many then from the FI Area you need to go for development ( we also faced this issue as profit center not maintained in MMRs and hence accounting got hit and there were tons of billing docs and our FI consultant made some development to open it and solve it) FI consultant should be able to do this for already created orders
Instead of making Profit centre field as mandatory field in the sales order better make it a mandatory entry in MMR
Regards
Raja -
Mb1b movement 453 - profit center not from material but from sales order
Dear All,
we have the problem that by return process from sales order stock to free stock (453 movement) we would like to have the original Profit center from sales order, but as SAP standard it moves PC from material master.
we have implemented already oss 978159 sowie 1038490, but did not help.
Since days we try to find an uxer exit in MM or CO!? where we could write in the correct profit center. But unfortunately PC from material master pops up at the end of the process, and the system overwrites it again and again.
Had sy of you similair problem? can you please help with an user exit?
Thanks,
BBHi
I think this behaviour is correct.. Since you are moving from Sales order stock to Unrestricted stock, the PC from mat master would prevail...
As far as I know, this behaviour is correct
Regards
Ajay M -
While creating Maintenance order using t-code iw31 mainwork center not pick
Hi,
while creating Maintenance order using t-code iw31 Maintenance work center not picking from drop down (already have in drop down)but giving manually accepting.
--GaneshHi,
My understanding is that the selected work center is not copied into the input field. This can be corrected with note [1451299|https://service.sap.com/sap/support/notes/1451299]. Check if the note is relevant for your system.
-Paul -
Profit center derivation from sales order line item - R/3 4.7
Hi,my scenario is below
FI document generated from billing is as
DR:GL1 - its not customer AR,because i post amount to one GL instead customer (profit center is dummy)
CR:GL2 (profit center is correct)
i can see profit center in sales order line item and billing line item,why that profit center not copy to GL1?can someone advise,thanks
Best regards
renhuaHi phaneendra Reddy ,
The substitution rule is to determine profit center in sales order line item,not for FI document.right?
because i can see correct profit center in sales order.
i know if i post debit site to customer AR,will execute a periodic run to transfer AR to profit center,but now i post debit site to a GL,dont know how to get profit center -
Profit center not updating with plant change
We have an issue with the profit center not updating with change in delivering plant.
A CSR entered a material on a sales order but the material is not extended to their location. They select a plant to deliver the material from. At this point the profit center fills in for that plant, from the material master.
The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant. They are able to find an available item at another location so they select that location.
When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant. The profit center does not pull from the material master correctly.
Has anyone seen this issue before and developed a solution?Hello Matthew
May be you have substitution defined in CO.
T codes 0KEM or 0KEL
See the following OSS notes:
167912 - Substitution call-up points for sales order/billing document
Hope this helps. -
Defaulting profit center from sales order while doing delive COGS line item
HI All
In my company COGS account is a cost element.when PGI(post goods issue) was posted, sap will automatically create an accounting dcument
CR:stock account ( profit center from material master data or from sales order)
DT:Cost of goods sold ( profit center from cost center master data)Can we default profit center from material master data(or from sales order) in the COGS line item
Thanks in advanceWhat is your current Version? Is it ECC6 and New GL implemented? Document split configuration will help you.
If you are not using ECC6 and New GL, then try T.Code 3KEH and determine profit center based on Valuation area. OR
You may look into GL Line item level, Write a Validation Rule to select profit center.
Hope this will help you.
Thanks
VR -
Error - Balancing Line Item Profit Center not filled in Line Item 007
Hi
I am trying to do a transfer posting from one vendor account to another. However, system is giving an error - Balancing Line Item Profit Center not filled in line Item 001. Pls suggest.
Regards
Vaibhavhi vaibhav
you go through this Tcode FAGL3KEH and maintain default profit centre. in the error message system shown GL accounts
hope you userstand
thanks
dharmendar -
Billing error-Profit center not exist
Dear Experts,
While Releasing the billing doc to Accounting , system throwing the error like, Profit center does not exist, but after that i updated the profit center for that material in material master,still i am geting the same error messageHi Raja,
Pls cancel the biling document that you have created and then populate the profit centre in sales order.
In sales order you can find it in item details view.>Accounting document>Profit centre.
For each item in the sales order you have to enter the value.
Save the Save order.
Or you can enter the profit center in MM02 screen.
Or you can maintain in OKB9 T.Code also.
Now create the billing document and release it to accounting.
Regards,
Krishna. -
PO not picking up the Price from Info Record ???
Hi,
Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
Schema Grp has been assigned in the Vendor Master.
Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
Can anyone help in resolving this issue ?
Lucky.Hi Lucky
1.Routine 6
This is an example of a pricing requirement. This requirement is met if the condition exclusion indicator is not equal to 'X'. <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>. Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure. This requirement is intended for use in MM pricing versus SD pricing. For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
If you maintain the values for these conditions in info record, these values will be copied from info to PO.
Regards
Ramakrishna
Maybe you are looking for
-
HELP WITH TRYING TO DO A FIXED ASSETS REPORT IN DISCOVERER
Hi... I'll try and explain this simply as I can. I am trying to do a Disco report to basically list the asset numbers with the cost, the opening depreciation, the YTD depreciation, Accumulated depreciation and the remaining life of the asset. I can g
-
How to import styleSheet.css file in to my jsp page.
Hi All, I am importing css file and other common javascript functions using the below code <style type="text/css" title="currentStyle"> @import "/<some project Folder>/styleSheet.css"; </style> <script language="JavaScript" src="<%=request.
-
Migrate PPPoE/Virtual-Interface from 7206VXR to ASR 1002
Good Day, I have been attempting to migrate services from an existing 7206VXR to a recently purchased ASR1002 and could use some help. My mistake in assuming that the config would be similar to 7206VXR, but there are changes - mainly VRF and cisco-av
-
Call *.jar inside the trigger (MS SQL)
Hi! I'm just looking around google and can't find any good news.. The problem is: how to call *.jar inside the trigger. Trigger is stored in M$ Server. Tnx, if any response! ;)
-
Problems with displaying tables from windows software in Powerpoint
I have been having some problems with powerpoint presentations that include tables from specific windows software. These tables were produced with the software package called SPSS for windows. The font that's used for these tables is Tahoma. The powe