Default quantity = 2 pcs. in POs with reference to contract

Hey gurus,
we have a material "A". Its base unit of measure is (and has to be) piece. Now, we have a contract for this material.
Normally we order this material in pairs (2 pieces) with reference to the contract, but sometimes only 1 piece has to be ordered.
Now I would like the system to give me a default quantity of 2 pieces in the PO. But I also want to be able to manually change this to 1 piece.
Is this possible?
Thanks in advance
Alicia

enter a rounding rule in your material master  or info record, that always round to 2.
SAP will then round the qantity to 2 when you create the PO, but if you overwrite again with 1, then SAP keeps this new quantity.

Similar Messages

  • How to control Order/Target Quantity with reference to Contract Quantity

    Hello GURUs,
    In my current organization, there is one scenario in which i have to control target quantity in sales contract e.g., i have created sales contract of 100 MT (contract no : 123), and with reference to that contract i have created another contract for say 100 MT (contract no : 456), after that i have changed quantity (of contract no 456) to 150 from original quantity 100. In this case system allows to do so, which is not correct, and i want same to be control based original contract quantity.
    Is there any solution in standard system to control the same? If there is any then pleas let me know.
    Thanks,
    Pratik

    Hello,
    Let me clarify your requirement:
    You have created Contract no. 456 (100 MT) with reference to another Contract No. 123 (100 MT).
    Now you want that system should not allow to change quantity in Contract no. 456 & keep it as it is (100 MT) in Original Contract No. 123.
    Now, if the above requirment is from Sales Order created with reference to Contract then it can be easily don thru Item Category Controls.
    But as the second COntract (456) is entirely a new Contract with it own contral parameters (validity dates, etc) system will allow you to change Quantity & other feilds).
    You requirment is not standard & will have be achieved thru applying a User Exit. Speak to your ABAPer & he would do the needful .
    Hope this helps,
    Thanks,
    Jignesh Mehta

  • Create a Sales Order with Reference to Contract using IDoc / LSMW  ( AFS )

    Hi Gurus,
    I need to crate a Sales Order with reference to a Contract. I need to upload Sales Orders with reference to contract via LSMW.
    So far, I've been able to create the Sales Order with ref to contract. But, the Sales Order Quantity is not getting deducted from the Original Qty in Referred Contract ( When try to create another Sales Order referring to the same Contract.) When a Sales Order is created manually, this is working fine.
    Please tell me if I've missed some parameter which stopping it create the link to exact schedule line ( Sizes level )
    The Details of the IDoc which is been created via LSMW are as follows;
    Message Type: ORDERS
    Basic Type     : /AFS/ORDERS05
    Process Code : ORDE / DELO
    ( Tried with both process codes.  But the Identification is the same for both: IDOC_INPUT_ORDERS )
    *_In Header;_
    Segment : E1EDK02  - IDoc: Document header reference data *
    Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
    Contract Order is mapped for field BELNR
    *_In Item;_
    Segment : E1EDP02  - IDoc: Document Item Reference Data *
    Qualifier : '043' - Vendor Contract Number ( Tried with ' 005' - Customer Contract, but it's not working )
    Contract Order is mapped to field BELNR
    Line Item of the Contract is mapped to field ZEILE
    I also tried passing the Schedule line of Contract in Segment :  E1J3P01 AFS IDoc: Doc.item general data
    to following fields;
    J_3AETENV
    J_3AVGETE
    /AFS/UETENR
    Still its not getting updated in the VBEP also..
    Please help me with regard to this. Points will be awarded for your valuable contribution.
    Thanks.

    Hi,
    This issue is been resolved.
    One of my friend helped me with resolving this issue..
    Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
    u2022     SPRO --> SD  -->Sales  --> Sales Documents  --> Sales Document Header  --> Define Sales Document Types  --> Field : Outline agreement message; from blank to u201CBu201D.
    u2022     SPRO  -->SD  -->Sales  --> Sales Documents  --> Sales Document Header  --> Maintain Sales Document Types for AFS  --> Field : Outline agreement message; from blank to u201CAu201D

  • Po Creation With Reference to contract

    Dear Experts
                       We are creating the purchase order with reference to contract the contract quantity not copied to po. it is asking to enter the qty. but it should copy the contract quantity. the same contract price also not copied to po. it is copying from the info record price.
    my scenario is at the time of po creation with reference to contract it should copy the contract qty and price any copy control assignment is there or any other settings required.
    Please help
    Regards
    Anand

    Hi,
    If a contract with one of your principal vendors exists for a material, you can create purchase orders referencing this contract. Purchase orders created in this way are called contract release orders.
    The price, vendor data,  terms of payment, delivery costs, and any instructions to the vendor are adopted from the contract automatically.
    If  you have created the contract & info records is also exists  then system will give priority to contract to determine the conditions.
    Please check the source list ,whether contract is maintained over there or not.
    Thanks,
    AMIT

  • Doubt in creating a sales order with reference to contract

    Hi all,
    when I create the sales order with reference to contract, in the table VBFA, the field PLMIN is set to zero some times and set to '+' some times. May I know whats the functionality behind this. Any pointers on this will be helpful.
    Regards,
    A.Rathinaprakash

    Hello A.Rathinaprakash,
    This is an Indicator which indicates the quantity or value in the target document(means Sales order) has a negative effect, positive effect, or no effect at all on the quantity still to be completed in the source document(means contract).
    Example from the Help file..
    In sales documents, for example, you can expect the following results:
    Quotation   -> Sales order: positive effect
    Contract    -> Return: negative effect
    Sales order -> Sales order: no effect
    In billing documents, for example, you can expect the following results:
    Delivery    -> Invoice: positive effect
    Delivery    -> Cancellation: negative effect
    Delivery    -> Pro-forma invoice: no effect
    Hope it helps..
    Regards,
    HP

  • Sales order with reference to contract

    Hi experts,
    I'll like create a sales order with reference to contract.
    In VA01, when I select "create with reference", system visualize a pop-up windows opened in offer view.
    Is it possible open that pop-up windows in contract view as default?
    Thanks to all.
    Angelo

    Hi,
    If you want it automatic at creation of order then go to VOV8
    Select your order type >>> Details >>> Under transaction flow Tab
    Message: Mast.contr - C (Check & baranch directly to selection list)
    Now when ever you create sales order for perticular customer & material, sytem give pop up screen, for this part open contract is available along with contract number,copy it directly.
    Kapil

  • Scheduling agreement created with reference to contract-Issue

    Hi all,
               I had posted a query as how to update net price in the contract/scheduling agreement if the condition price is updated through inbound Idocs.I got the correct answer  as you need to run the report RM06ENP0/RM06ENP1 as per note 685117.
    But now I am having a different issue;the scenario is like: A scheduling agreement is created with reference to contract.So the SA is linked to contract now.I am now going to change the condition price of SA through Inbound Idoc.After the updation ,the condition price gets changed in all cases.
    In one server,I found that the net price gets updated and the link btn contract and SA is broken without running the report RM06ENP1(Ideal situation,this is what I want).In other server ,I found the net price is not getting updated,ie the link is not broken even after running the report RM06ENP1.
    Can anybody tell me why the second situation is happening?

    Hi,
    i have done ur scenario. According to ur scenario, quantity contract is created for 100 units may be kg, pc etc.. Then scheduling agreement is created with reference to that contract but for 200 units may be kg, pc etc.. Scheduling agreement is created without getting any error or warning message.
    In the Next step, i.e. maintain delivery schedule( Tcode: ME38). U get the ERROR message as Scheduling agreement document number xxxxx is does not exist after entering scheduling agreement number in the initial screen of ME38.
    if this information is useful for u, reward me according to ur usage.
    bye
    Narasimha Rao Gunda

  • Service PO with reference to Contract

    Hi
    Can anyone help me out, when i create Service PO with reference to service contract system is not copying service line item detail from the contract with Full quantity as it was declared in Contract.
    For example in Contract service line item with quantity 10 EA. when i creating PO with reference to contract system only pick Service header line and when select the service line from service selection button system will only 1 quantity each time so that  in order to create PO with full quantity so you have to select 10 times each service line item.
    Kindly look into this.
    Regards,
    Muhammad Tahir

    Hi,
    Deleted by Moshe Naveh
    Regards
    Raj.
    Edited by: Moshe Naveh on Dec 21, 2011 2:05 PM

  • Error while posting a sales order created with reference from contract for

    Hi,
    I am posting a sales document( Type: WA)  created with reference from contract document(  type wk2) for delivery.  The item category in the sales order of the Item is WAN. On posting this document for delivery I am getting the error as "Item category WAN is not defined".  Please help me out how to resolve this issue.
    Thanks
    Jayant

    Hi Jayant,
    I think its value contract releated error,
    You suppose to check material item category group through T.code-MM02 into sales2 tab and maintain VCIT,
    and do item category assignment through T.code- VOV4.
    plz.maintain like that,
    WK2 -          -VCIT-         -           - WAN(contract item category),
    wk2  -          -        -VCTR-          - WAN((contract item category),
    you should also maintain same against your standard Sales Document type and for Standard Item category into VOV4,
    WA(standard docu.type) -VCIT-                             -                -TAN(your standard docu.type item category),
    WA(standard docu.type) -         -VCTR(item usage)-              -TAN(your standard docu.type item category),

  • With reference to contract Purchase Order Analysis report.

    Hi,
    I need SAP Standard " With reference to contract Purchase Order Analysis report"
    Regards,
    Priya.

    Hi,
    there is no standard report to get the PO list wrf to contracts,
    but you can get through SE16 from the table EKPO, where you have to pass the contract numbers ( get through ME3L,ME3M or ME3C ) in the field KONNR,
    lakshmi reddy

  • Sales Order Creation with reference to Contract

    Hi all ,
    Existing Setup in the System:
    1)  I have a contract created with a validity period of 30 days. When i create sales order with reference to contract, then i get a pop-up box, from the box i can select my contract.
    2) I have a Lead time configured as 5 days for the Sales document type , I,e when I create sales order I can see my Requested delivery date is always system date + 5 days.
    3) I have a Pricing date configured as Today’s date. Therefore when I create sales order I can see pricing date becomes the system date.
    Execution of Sales Order:
    4) When I create Sales Order with reference to contract document. Always Requested Delivery date is compared with Contract Validity Dates.
    Example: Contract Validity 01/03/2008   -    31/03/2008
    Sales Order: Sales Order Creation date -> 19/03/2008, Pricing Date: 19/03/2008 Requested delivery date 24/03/2008.
    REQUIREMENT IS:
    But my requirement is when i create Sales Order it should consider System date or Pricing Date( since pricing date is today date)  for to compare with contract validity dates.
    Can it be done with standard config or do we need to some type of custom?  Appreciate your help
    Thanks

    Hi ,
    As said when I create Sales Order with reference to contract document. Always Requested Delivery date on Sales Order is checked against Contract Validity Dates.
    But i want Pricing date  in Sales Order should be checked against Contract Validity Dates.
    Can someone suggest me on this?

  • Change of Sold to Party in Sales order created with Reference to Contract

    Dear Gurus
    I want to change the sold to party in Sales Order created with reference to contract.
    When I create a Sales order with reference to contract the system copies all the partner functions- Sold to, Ship to, Bill to and Payer alongwith other data.
    However Sold to is marked as "Grey" and not changable, rest of the partners can be changed.
    There is no subsiquent document created with reference to this Sales Order.
    Please advice.
    Thanks a lot.
    Regards
    Raghu

    Hi ,
    Please follow the below mentioned step.
    1) Create a partner function letts say Authorized SP .
    2) Assign all the possible authorised  SP (customer) in the contract.
    3) When you create sales order with reff to Contract. Put the customer for whom you wish to create a sales order in release partner tab.
    Hop this will resolve our problem
    Regards,
    Krishna O

  • Sales Order Created with reference to Contract - Exchange rate Issue

    When Sales Order created with reference to contract VBKD fields KURSK and KURSK_DAT gets copied from contract and not redetrmined based on pricing date and Exchange rate type. I expected it to be determined based on pricing date is standard. What I am missing, should it be controlled by data transfers
    If Document currency and condition currency are different it cause problems with incorrect condition values are calculated, as KOMP-KURSK are copied from VBKD-KURSK
    Any help or directions would be greatly appreciated . We are on 4.7 ISOIL
    Sincerely Julietta

    Well,
    and if we have the same issue, but we don't have OIL Version, but simple 4.6C, which solution has to be applied then?
    Thank you
    Standa

  • Creation of Purchase requisition with reference to Contract documents

    Dear All
    I am not able to create the Purchase requisition with reference to Contract documents, in outline agreement field if I enter the contract document number which is already existing it is not copying the details, again I have to enter all the details like Plant, Material, document type, Qty etc.  Even after selecting the PR document type as RV for outline agreement also it is not coping. Kindly let me know that can we not able to give reference of Contract number in this outline agreement field to create Purchase requisition.
    regards
    Dhanu

    1.Logistics--Materials Management--Purchasing ---Purchase Requisition --Follow-on functions --- Assign and Process
    2.ME57
    3.Select the Assigned Purchase Requisitions checkbox if you also want to see requisitions already assigned, and choose Execute.
    4.On the Assign and Process Purchase Requisitions screen, select the requisition lines for your material.
    5.Choose Assign Manually if the info record already exists.
    6.On the pop-up Assign Source of Supply Manually dialog box, make the following entries:
    Agreement     46XXXXX            Agmt item     10          
    7.Choose Assign Source of Supply.
    For assign the source of supply, you can also choose Assign Automatically (only if not already assigned by MRP due to existing source list). If more than one source exists, select the contract in the Source Overview for Purchase Requisition 100XXXXX window and confirm with Enter.
    When assigning a source, make sure to select the contract.
    8.Choose Save.
    9.Select the line item, and then choose Assignments Overview (SHIFT+F5).
    10.On the Assign and Process Requisitions: Overview of Assignments screen, select the line below Vendor (you can only select one at a time), then choose Process Assignment.
    11.On the Process Assignment: Create PO window, check and make sure the Order Type (NB), Purchasing Group and Purch. Organization fields then choose Continue (Enter) to confirm.
    12.On the Create Purchase Order screen, select the requisition in the Document Overview section and choose Adopt in the left part of the Document Overview screen.
    13.Choose Save.

  • Sales order with reference to contract using IDOC_INPUT_ORDERS

    Hi all,
    I had the requirement to create sales order with reference to contract based on some validations of idoc values and then passing the modified idoc data table to IDOC_INPUT_ORDERS. I have completed the coding till the modification of data in a new function module ('Z') and then calling the IDOC_INPUT_ORDERS FM inside that. Now my problem is while creating the sales order, the bdc for Txn VA01 is not populating those values to screen fields which I want to populate. I could find out that some modifs needs to be done in some user exit for reference to contract case.But finding difficulty in getting the exact place to make the modifications. Any pointer to this problem would be highly appreciated.
    Regards,
    Divya

    Hi,
    This issue is been resolved.
    One of my friend helped me with resolving this issue..
    Once the below mentioned configurations were done on SPRO, the Sales Order was created with reference to Contract and the Qty was reflected when tried to create a new Order referring the same contract.;
    u2022     SPRO --> SD  -->Sales  --> Sales Documents  --> Sales Document Header  --> Define Sales Document Types  --> Field : Outline agreement message; from blank to u201CBu201D.
    u2022     SPRO  -->SD  -->Sales  --> Sales Documents  --> Sales Document Header  --> Maintain Sales Document Types for AFS  --> Field : Outline agreement message; from blank to u201CAu201D

Maybe you are looking for