Define the Version of Excel starting over the Business Explorer

Hello,
we are running SAP BI 2004s. On my computer are two versions of Excel installed. Excel 2003 and Excel 2007. Actually over the Business Explorer I can only start Excel 2003. Is there a possibility to change this adjustment without deinstalling one version of Excel? I need both versions because of tests.
Many thanks!

Jörg,
another way of starting BEx analyzer is by running the XLA file directly out of Excel. Open up the 2003 version, and start this file (this is the default location):
"c:Program FilesSAPFrontEndBwBExAnalyzer.xla"
BTW - I use both versions of excel (2003 and 2007) with BEx, and both are running fine. Beware that you cannot save workbooks in xlsx format (new Excel 2007 open XML format) and then save them in the system yet (will be fixed in the upcoming support stack I believe). For that reason, I typically would save the workbook by using Office 2003, and then when I return to it, I can use either 2003 or 2007
good luck
Pasha

Similar Messages

Defining the Business Process Structure

Dear All,
I am defining the Business Process Structure in SOLAR01.. by default we will get the following Structure
Project
               Master Data
               Organization Structure
               Business Scenario
                               Business Process
                                           Business Process Step
My Question here is , i want to add some node on parallel to to Business Scnario and Business process. as per my knowledge it is not Possible . But you guys did something on this please let me know.
Project
               Master Data
               Organization Structure
               Business Scenario
               non-SAP business scenario
                               Business Process
                                           Business Process Step
                               non-SAP business process
                                           Business Process Step
Could some expert suggest on this ?

Dear Prakash,
In solution manager till EHP1 it is not possible to meet what is ur requirement but you can do the following as an alternative
Project
Master Data
Organization Structure
Business Scenario Std Selected from BPR e.g Service Desk
Business Process std
Business Process Step Std
Business Scenario Non Std Directly entered the name of scenario in Structure tab e.g any Zscenario
Business Process Non std ( you need to add here the process for zscenario)
Business Process Step Non Std ( you need to add here the process step for z*)
But if you very specific to go with 4 main nodes as you said then you need to modify the standard with ABAP Developement and there is no alternative.
Hope it clarifies.
Regards
Prakhar

Federating the Business explorer role

Recently we have successfully federated some reports for some business users. Now another business group is interested in federating the Business explorer role. They would like to take advantage of the BexWebanayzer iview and a few of its features. They want the ability to personalize (change the columns and filteringu2026) a report and save it in their personal Portfolio area in KM on the producer. I'm having some issues federating that iview and the business explorer role. Is anyone aware of any other SAP users that have federated the Business explorer role?
Along with federating the role the users would like to hide 2 of the tabs within the popup iview of the "save as" in the BexWebAnalyzer iview . I don't know if this is even possible to modify the popup and I can't seem to find that popup object/iview.
Thanks, any info is appreciated.
Jim

Hey @ All,
how did you install the EP? What kind of Usagetype did you select?
To have the BI content installed to the EP you need to install the BI usagetype as well. So in SAPinstaller you have to check the marks properly.
If you have installed only the EP usagetype you are able to reinstall the BI usagetype afterwards. As far as I know you can start the SAPinstaller again and set the right checkmarks.
The BI (usagetype) content needs a WEBAS Java and EP installed.
Hope this explanation helped a little... if so points are very welcome since i am starting from scratch!
kind regards
Tobi

Currency conversion in the Business Explorer(Query design)

Hi Experts,
How to convert currencies from CAD to USD using the Current exchange rate 0011 for a particular record in the Business Explorer (Query Design).
Any useful answer will be rewarded with suitable points.
Thanks!
Rohan

Create a currency coversion type for the exchange rate
Go to RRC1, enter a name for your new currency conversion type
on the exchange rate tab mark the radio button Exchange Rate Type.
enter the exchange rate type there
enter the target curr in the tar curr tab as USD
similarly in the query also enter the curr conversion key.
hope it helps,
assign points if useful

Problem executing a report in the Business Explorer

Hi people,
I'm trying to execute a report with the transaction RRMX in BW but when I execute it in the business explorer I receive this error:
internal error Problem when writing table: C_T_VARIABLES
Abort system error in program SAPLRRK0 and form NODE_AUTORITY_FILL_2
Someone have an idea of the problem?
Thanks a lot!

Hi
Is it for all your reports ?
If it is for one, what does it do ?
Do you have the customer exit activated and filled in ?
PY

Where to define the Business Area in SAP?

Hi All,
could anyone tell me where is created a Business Area in SAP?
thanks
Gandalf

Hi,
Please follow the below path to create Business area.
IMG --> Enterprise Structure --> Definition --> Financial Accounting --> Define business area
Thanks,
Giridhar

I have registered Adobe CS, and every two/three weeks i get a message that I am using a trial version. I provide my registration key, and the fun starts over in two/three weeks. What is going on?

I have registered Adobe CS, and every two/three weeks i get a message that I am using a trial version. I provide my registration key, and the fun starts over in two/three weeks. What is going on?

I'm not sure what's happening. See if you can get some help from Web Chat here:
Serial number and activation support

Fafter upgrading to mavericks,I had problems with windows 8.1, so deleated partion to start over. Everthing went fine until The fact I was using an upgrade disc instead of a bootable version. Now everthing is loocked up and none of the hotkeys work

after upgrading to mavericks, I had problems with windows 8.1. I deleated the partition to start over. Upon try ing to reinstall 8.1 everthing locked up. I had an upgrade disk instead of bootable. Now every time I turn the computer on "it asks for bootable media"; none of the hot keys work to get back eo mac os

You mised the last part where none of the hotkeys are working,neither options nor "X" it goes ms 8.1 boot up and asks foe a bootable disc. I am about to pull the HD put it into a case attach it to another computer and delete the file

I can only open one PDF in session. If I try to open a different one, I get the same as before. The only way to see a different PDF is to close the browser and start over. A bit hassle with sites requiring a password.

Many web sites have links to multiple PDF files. I have no trouble reading the first PDF file, but if I try to open a different one, I always get the first one I opened. Firefox ignores the other links and goes back to the first one. The only remedy seems to be to close Firefox and start over again. This is a hassle for sites requiring a username and password to enter. What's wrong here?

Do you have Adobe Reader X or Adobe Reader 9.something?
I think this is a problem with the newest version of Adobe Reader which came out about 5-6 days ago.

The spinning "wheel of death" does NOT go away! I've loaded too much stuff on my computer (including the entire Adobe CS6 software) and I want to delete everything on my macbook pro and start over? How do I clean everything up without buying MacKeeper?

I use my MacBook Pro (Late 2009) for EVERYTHING and I have loaded so many apps, even doubles of some, I think!   My computer is running really SLOW and I think it is because I don't have enough memory.
I just installed the new Adobe CS6 and that was a BIG mistake. The spinnning wheel of death doesn't stop! I wish I could load that program on my computer so I can use it "on the go", but I can't stand the spinning wheel!
I want to clean up my computer and get rid of EVERYTHING on it!!     Then, re-install the factory settings to run Lion. I believe this will make the wheel stop spinning.
However, how do I make sure that all of the extra stuff that is attached to the app, ( including all the cache') is deleted too?   I don't want to have to buy MacKeeper!
I am hoping the computer wizards or the apple team can give me an answer on how to clean up everything and start over. I have saved everything on my desktop mac.

Thank you so much for the help! I had heard bad things about MacKeeper and I don't want to screw up my macbook any more than it already is! I will do as you suggest. Do you believe this is the best solution for the problem I described?
Should I load my Adobe Creative Suite 6 (in the cloud version) on an external hard drive?
I am so tired of this spinning wheel....should I avoid putting the CS6 on my macbook pro altogether?
I have it on my desk top mac, but wanted to be able to take the photo editing with me when I am "out and about". I know I should probably buy the ipad, which would transport much easier, but even the ipad probably doesn't have the capacity to hold all the Adobe CS6 apps, correct?

TS3212 All your music in one place. This is what's showing when I downloaded the new itunes but will not go any further. Have been here for 20 minutes? Do I need to start over? Or is there something else I can do to get to so I can click next for the

I've been trying to down load the new itunes version and I'm stuck on All your music in one place but now it's been stuck there for over 20 minutes. Do I need to start over or is this normal?

The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

Cleanly "Starting Over" with the Desktop Software (non-BES)

Hi there,
With the advances in the RIM Desktop Software, there have been many posts about the upgrade process resulting in less than functional situations. The process I recommend is to cleanly start completely over, cleaning all remnants of the Desktop Software from the PC, and perhaps even clearing the content databases from the BlackBerry SmartPhone (on the assumption that the Desktop Organizer app has complete and correct data).
To do this, I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista/Win7, use the "Run As Administrator" option for everything that you can. Additionally, if you are truly concerned about your data, then you should first copy (for Outlook, to a PST) your contacts, calendar, memos, and tasks...just to be sure, in case of something catastrophic.
There are some reports that a Windows user profile (type 'echo %userprofile%' in the command prompt) that contains spaces might cause the installer to fail. In order to solve this issue, log out of your Windows account and log back in using the local Administrator account (or any other account name without spaces, but with full admin rights) and install the desktop (for all users).
1) Remove any/all BlackBerry Device Software package(s) from your PC
Add/remove programs, Uninstall, etc. depending on your Windows OS level
2) Cleanly uninstall the RIM Desktop Software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
Some have reported the manual search and removal of RIM, BB, and Puma registry keys to be helpful.
Do not attempt this if you are at all unsure -- editing your registry incorrectly can render your entire PC useless!
Others have reported the use of a registry cleansing tool to also be helpful
Still others have reported the use of your original PIM (e.g., Outlook, NOTES, etc.) installation CD, running the "repair" process, to be helpful in some situations
3) Get a fresh download of the RIM Desktop Software:
http://us.blackberry.com/apps-software/desktop/
4) Download (to your PC) a fresh copy of your BlackBerry Device Software package from your carrier -- it must be the version that your BlackBerry is already running (otherwise, the Desktop Software will attempt to change the version that is running on your BlackBerry):
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
KB23393 How to check the model number and version of installed BlackBerry device software on a BlackBerry smartphone
5) Install the Desktop Software to your PC -- do not allow it to start
6) Install (also to your PC), the BlackBerry Device Software package -- do not allow it to start the Desktop Software
If the package came from a carrier other than that for which your BlackBerry was originally manufactured, then after this install step completes, you must delete, from your PC, at least one copy, and possibly two, of VENDOR.XML.
One will for sure be here (or something quite similar, depending on your Windows OS):
c:\Program Files (x86)\Common Files\Research In Motion\AppLoader
The other might be here:
c:\Users\<insert your user name>\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
7) Start the Desktop Software and connect your BlackBerry to your PC (USB) when prompted.
8) OPTIONAL -- if you truly want a clean start over AND you are 100% sure that the data in your PC Desktop Organizer (e.g., Outlook) is accurate, then, at this point, you can clear the BlackBerry of all Organizer data so that you can start over fresh, using your PC Organizer data as master:
KB10167 How to clear the user content databases from the BlackBerry smartphone
9) Start the organizer configuration over:
KB03315 How to synchronize organizer data (calendar, task list, memo list, and contact list) using the BlackBerry Desktop Software
If you are using Outlook AND multiple profiles, be sure to click the "Configure" button, inside of the Configure screen for each organizer app...that is how you select the proper profile for EACH Organizer component you are configuring.
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am having the same problem syncing aftre having downloaded the new Desktop Manager and have tried most things. Seem ridiculous that this amount of time needs to be wasted just because BB releases a new version before it is ready.

TS1363 I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone h

I used to sync my iphone to a laptop which is no longer in my posession. I am now looking to start over and have a new itunes on my pc with no music on it. When i connect my iphone up to the new itunes it doesn't recognise it or sync - can anyone help me?

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

I just updated to Numbers 3.0.1. In the old version if I started to type a name that was already in the spreadsheet, it would automatically fill it in. That doesn't happen in the new version. What am I missing to get that to happen?

I just updated to Numbers 3.0.1. In the old version if I started to type a name that was already in my spreadsheet (in another cell), it would automatically fill that name in. That is not happening in the new version. Am I missing something to get that to happen? Thanks

If you frequently enter repeating values in a column and don't want to type the same text over and over again, instead of just waiting for Apple's updates why not try using an enhanced feature in Numbers 3 that in many (probably most) situations is even better than "auto-complete"?
Numbers 3 has an enhanced Pop-Up Menu functionality that helps prevent typos or capitalization inconsistencies from creeping in and messing up your data. It is also much more efficient than auto-complete in Numbers for iOS, should you ever want to sync to an iPad or iPhone and do data entry there.
Pop-Up Menu is much enhanced over what it was in Numbers 2.3, and is easy to set up:
Select the whole column or range before formatting as Pop-Up Menu and your existing values in that column or range will pre-populate a menu automatically:
Then you can remove the values you don't want in the list, such as the column header (and possibly some previous spelling errors too!):
And after this easy one-time setup all you have to do thereafter is to choose from the pop-up list when you add rows:
See this post for more details on how this handy feature has been enhanced in Numbers 3.0.
Should you ever want to take your Numbers with you and do data entry on an iPad or iPhone, in a touch interface, pop-ups are much more efficient than typing the first few letters of items. You can scroll with ease through a list of dozens of items to make a pick. Anybody using Numbers cross-platform should favor Pop-Up so they can use their documents efficiently for data input on the go, which can be a productivity booster.
See this thread for this and other workarounds for Numbers 3.0.
SG

Define the Version of Excel starting over the Business Explorer

Similar Messages

Maybe you are looking for