Delete Abap program via change reqeust

Hi,
    We deleted some ABAP report source code via tcode(SE38) at development system. The system ask insert the delete action to one change request. I have added it to the change request. The ABAP source code have delete at development system. We transported the change request to our QA and PRD system. The deleted ABAP program source code is still exist in QA and PRD system. We want to delete the QA and PRD system ABAP source code. Could you pls advise how to delete it? Thanks.
Best Regards
Park Han

My delete ABAP program process, Pls help check it correct or not. And How to delete the QA and PRD system ABAP program source code? Pls advise.
1. Access Tcode(SE38)
2. Input the delete program, Click Delete button.
3. The system ask generate the change request. I have create the change request.
4. Release and transport the change request to QA and PRD system.
5. The development ABAP program has deleted. I can't find it via Tcode(SE38).
6. We checked the ABAP program at QA and PRD system. It is still exist.
Best Regards
Park Han

Similar Messages

  • ABAP Program Name CHanging the PSA Load status

    Hi,
    Our Scenario is Non-SAP -> PI -> BI.
    Every Day PI reads the file from source and it will directly upload to PSA in BI.But in PSA the status will show as yellow only it is not turning to green.But I am able to see the data in PSA but status is yellow.
    When we activate the Data source manually the load status is turning to green.
    I heared there is an ABAP Program to change the status.If anybody knows pl provide me the details.
    Regards
    Ram.

    Hi Ramakanth,
    Yes, that right. I have mistaken here because our pos dispatcher pumps data source every 15 mins thats why its in yellow status. I am sorry about that.
    Usually there are some reasons why the PSA in yellow.
    1. If the data is being loaded from PSA to data target, it will be in yellow
    2. If the data is loaded into PSA then it will be in yellow
    3. If we make any changes in the PSA for example deleting few records in psa and then added and transferred records doenst match then it will be yellow. In this case we have to manually change the status.
    In your case I am not sure y its not getting into green once is done. We never had any issue. Pos dispatcher runs and uploads the data into PSA and then we upload into targets.
    Thanks
    Srikanth

  • Delete ABAP Program Variant

    Hi,
    Is there a way to block users from deleting the variants in an ABAP program?
    The PROTECTED flag only protects against any changes...but allows deletion..strange!!!!

    AT SELECTION-SCREEN.
      CASE sy-ucomm .
      WHEN 'VDEL' .
      MESSAGE 'Variant cannot be deleted' TYPE 'E'.
    ENDCASE.

  • Transport of ABAP Programs via File

    Hello,
    I want to transport an ABAP-Program into my training-system at home (SneakPreview 2004s).
    Because there is no connection between the systems, I search for a solution via filesystem.
    Thanks
    Armin

    Hello Armin,
    The approach for downloading to a notepad maynot be very be useful The report will have includes,function modules etc... Also it will have screens which you cannot download on notepad!!
    So do one thing. Include the report with all its components : includes,screens etc..in a transport request. Do it though SE80 transaction. Once done release the transport request. This will result in creation of data file and co file.
    Now at OS level you can get these files and then you can copy them on CD/DVD. Put these files i the respective folders of your target system and import the transport.
    If this is Z report and has a Z development class/message class I would suggest including it also in the transports. Development class/message class  availability before the report import happens is a must. So include every thing in the transport and use data files and co-files.
    Please award points for useful answers.
    Regards.
    Ruchit.

  • Retriving a a deleted abap program

    A Custom ABAP program was accidentally deleted a few weeks ago and the transport made it to production and all systems.  Are there any options to get a copy of the program back from somewhere? anywhere?
    Message was edited by: Scott Hoelscher

    Create a program with the same name as earlier (which is deleted)
    Click on "Utilities" --> "Versions" --> "Version Management"
    Select the version of your earlier program and click on display.
    Your earlier program is displayed here.
    This is only possible if you have generated a version and saved the program in a package other than $TMP.

  • How to delete ABAP program of production environment

    Dear Experts,
    I have to delete a Z program, exists in production environment. But the program does not exist in development environment. Is this possible to delete the program using transport request? or other ways to delete the program in production environment.
    Thanks in advance.
    Tanay

    Hi Tanay,
    If you have access tcode SE80 in Production system, you can delete it.
    Srivijay

  • ABAP program to change SD sales order originally created on CRM

    Hello all!
    Please, I would like to ask you some wisdom about this question:
    I need to use a BAPI (BAPI_SALESORDER_CHANGE) or a call transaction (to t-code 'VA02') to modify in the R/3 system (v. 4.7) a sales order that was originally created in the CRM system.
    If I try to do it manually, in t-code VA02, I get a message that this order must be modified only in the CRM system. I debugged and found that there are functions that check this and deny acces to the order.
    I found this check on form FV45LF0M_MESSAGE_VARIABEL. This it the one that issues the error message.
    Actually I need to find a way to, without modifying standard routines or tables, change the order the way I said.
    Please, can someone help with some ideas?
    Thank you very much for your time!
    Best Regards,
    Douglas Cezar

    Rob, thanks for the answer.
    To adress a specific business need, I have to update the order directly in the R/3 system, without having to go to the CRM system.

  • Selective Deletion of the Cube contents in Abap Program of the PChain

    Dear Experts
    I need to selectively delete the contents in Basic Infocube using Process Type - ABAP Program in the Process Chain in BW 3.5
    For this I have to give the Variant and Program name in the Process Type - ABAP Program in the Process Chain
    The ABAP Program for this purpose can be generated automatically by the system in the the below navigation
    info cube> Manage>contents > system menu(in the Top)> Status
    but this abap program is changing dynamically every time and hence in the Process chain ABAP Program node is failing with error saying that that program is not available
    I have tried the same way  in the selective deletin navigation path also in the cube manage
    Please let me know how to get the system generated program to use in the Process type-ABAP Program in Process Chain
    Thanks for all in advance
    KSR

    Hi KSR,
    Try this.. start a selective deletion on the cube. you will get a background job running. Get the job name from SM37.
    Now write a ABAP program with the below code.
    parameter: p_Job_Name type sysuuid_c.
    CALL METHOD cl_rscrmbw_bapi=>exec_rep_in_batch
    EXPORTING i_barepid = l_jobnam.
    Execute the above program. Pass the job name which you got from SM37.
    Create a variant with that job name.
    Now schedule this newly created program. This should solve your issue.
    Note : The job name might vary from one server to another (Dev / Qual / Prod). So if you are planning to move your process chain from Dev, then pass the Job name (in prod) as the variant in yr Dev system and then transport it.
    Cheer,
    Balaji Venugopal

  • How can we delete a ABAP programe

    Hi,
    How can we delete a  ABAP programme which is  no longer in use.?
    Regards,
    kranthi

    Hi
    You can delete ABAP programe in tcode SE38 select the programe name and select Delete from application tool bar
    But please put ABAP related threads in ABAP forum
    Regards
    Amiya

  • Help in abap program

    hellow i have a table itab with value (ex. error value) and i wont to select some value from tables ( defined below.) and put it in table err_itab my problem is in the loop i dont now how to continued from their i thihk with append to intrernal tables and after to do read to err_itab, but im not sure this is my program any suggestion. thankes for your time and suggestion.
    form write_2_file .
    IF file_ser IS INITIAL.
    CALL FUNCTION 'WS_UPLOAD'
    EXPORTING
    CODEPAGE = ' '
    filename = l_name
    FILETYPE = 'ASC'
    HEADLEN = ' '
    LINE_EXIT = ' '
    TRUNCLEN = ' '
    USER_FORM = ' '
    USER_PROG = ' '
    DAT_D_FORMAT = ' '
    IMPORTING
    FILELENGTH =
    TABLES
    data_tab = itab
    EXCEPTIONS
    conversion_error = 1
    file_open_error = 2
    file_read_error = 3
    invalid_type = 4
    no_batch = 5
    unknown_error = 6
    invalid_table_width = 7
    gui_refuse_filetransfer = 8
    customer_error = 9
    no_authority = 10
    OTHERS = 11
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ELSE.
    OPEN DATASET file_ser IN TEXT MODE
    ENCODING DEFAULT FOR INPUT.
    IF sy-subrc NE 0.
    MESSAGE e002(yhr) .
    ENDIF.
    DO.
    READ DATASET file_ser INTO wa_itab.
    IF sy-subrc NE 0.
    EXIT.
    ENDIF.
    APPEND wa_itab TO itab.
    ENDDO.
    ENDIF.
    endform. " write_2_file
    FORM get_data .
    CLEAR wa_itab.
    LOOP AT itab INTO wa_itab.
    IF wa_itab-action = 'y1'
    OR wa_itab-action = 'y2'
    OR wa_itab-action = 'y3'.
    SELECT SINGLE ansvh
    FROM t542a
    INTO wa_b_itab-ansvh
    WHERE molga ='IL'
    AND ansvh = wa_itab-contract.
    IF sy-subrc <> 0.
    APPEND wa_b_itab TO b_itab.
    SELECT SINGLE werks btrtl
    FROM t001p
    INTO (wa_c_itab-werks, wa_c_itab-btrtl)
    WHERE molga ='IL'
    AND werks = wa_itab-personnel_area
    AND btrtl = wa_itab-personnel_subarea.
    IF sy-subrc <> 0.
    APPEND wa_c_itab TO c_itab.
    SELECT SINGLE objid
    FROM hrp1000
    INTO wa_d_itab-objid
    WHERE otype = 'S'
    AND objid = wa_itab-plans
    AND begda <= currnt_date
    AND endda >= currnt_date.
    APPEND wa_d_itab TO d_itab.
    ENDIF.
    ENDIF.
    ENDIF.
    ENDLOOP.

    <i>I have added authorization check in ABAP program(Progran level security).</i>
    i assume you have coded call authority within the program.
    <i>If an end user runs the transactionm, then which authorization check will fire first?</i>
    if he calls the transaction, then first authorization attached to the transaction will be checked.
    but if he executes the program attached to the transaction, then the authorization attached to the transaction dosent help here, the one coded in side the program is checked.
    <i>If I have web enabled my ABAP program via SICF (in other words, ITS).</i>
    it depends,
    if you are calling your transaction like
    webgui/?~transaction=<tcode> then first tcode level authorization.
    if you generate the templates for the program and callign the same, then i guess its progam level. (i need to check this)
    Regards
    Raja

  • Question on security in ABAP program with ITS. Please help!

    Hi Experts,
            I have a question on security in ABAP program.
    I have a ABAP program which has a transaction attached.
    I have added authorization check in ABAP program(Progran level security).
    I have also attached the authorization object to the transaction.(Transaction level security)
    If an end user runs the transactionm, then which authorization check will fire first? Will it be transaction level?
    If I have web enabled my ABAP program via SICF (in other words, ITS). Then when I try to run my ITS service in the browser will the transaction level authorization fire? or Will the program level authorization fire?
    Please help me understand this security aspect.
    Thanks
    Gopal

    <i>I have added authorization check in ABAP program(Progran level security).</i>
    i assume you have coded call authority within the program.
    <i>If an end user runs the transactionm, then which authorization check will fire first?</i>
    if he calls the transaction, then first authorization attached to the transaction will be checked.
    but if he executes the program attached to the transaction, then the authorization attached to the transaction dosent help here, the one coded in side the program is checked.
    <i>If I have web enabled my ABAP program via SICF (in other words, ITS).</i>
    it depends,
    if you are calling your transaction like
    webgui/?~transaction=<tcode> then first tcode level authorization.
    if you generate the templates for the program and callign the same, then i guess its progam level. (i need to check this)
    Regards
    Raja

  • RRI calling Web Browser instead ABAP program

    Hi All,
    I have created a RRI to call an ABAP program. However, when I try to call the ABAP program (via GOTO) it opens a web browser.
    If I execute the same query via RSRT, and call the ABAP program it works fine.
    I have also create another RRI to call another query from within BEx and it works fine.
    It only fails when calling ABAP program from BEx.
    I have read on to apply SAP NOTE 972514 - Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application.
    My ms/redirect is already = 1
    Any ideas?
    Thanks,
    Flavio

    I do have authorization. There is no error. It just open a internet explore (URL) instead of executing the ABAP program.
    Again, if I run the query via RSRT, it works just fine.
    Any ideas?
    cheers,
    Flavio

  • Schedule Jobs with multiple steps via ABAP Program

    Hi,
    I need to schedule multiple programs via background jobs on a daily basis. Since all these jobs are to be run as a single job, the various programs have to be run as steps in a major job.
    I am however not very clear on how this can be done via an ABAP program ( the idea of a program is that various parameters to be passed to each program in the step can be entered dynamically rather than via variants).
    I am using the JOB_OPEN and JOB_CLOSE functions and submitting the programs with selection screen parameters dynamically passed to create a job. I need to do this for various programs as a job step (WITHOUT Variants being defined).
    Can anyone suggest any ideas for this? I have tried out JOB_SUBMIT Function but am not very confident I know what exactly it is for as it asks for a variant.
    Thanks very much,
    Preet

    Hi Preet,
    just to be sure: you know, that variants can be dynamical, too?
    It's quite usual to assign dynamical current date, but it's also possible to add / subtract value and even define own functionality.
    Maybe it's easier to implement a dynamical selection and handle static jobs.
    If you try to plan a job (online or with JOB_SUBMIT), you have to use variants - you can create (or change) them dynamical in beforehand. Only SE38, F8, F9 is creating a temporary variant, so that no saved variant is necessary.
    But if you end up creating variants dynamical, you can change one existing variant, too. Then you can use a static job definition (with periodical starting rule).
    So: have a look, if dynamic variants are enough, otherwise change variants per job.
    Regards,
    Christian

  • How to extract data from BPC InfoCube via ABAP program?

    Hi experts!!
    I tried to extract data from a BPC InfoCube via ABAP program, but I did'n have succeed.
    I used the function 'RSDRI_INFOPROV_READ' to extract data from standard InfoCubes such as '0COPC_C07' and it run OK! However, when I change the InfoCube name to '/CPMB/WAIX8NE' (BPC InfoCube), everything goes wrong...
    Is there any difference between extracting data from BPC and standard InfoCubes?
    Thank you all!

    Moderator message - Welcome to SCN.
    But please do not cross and duplicate post.
    Thread locked.
    Rob

  • ABAP Program to delete the WDSO contents from active data table & Manage Re

    Hi,
    We have requirement where we have to delete the request id from manage screen and data from Active table of WDSO.
    I have gone through this weblink where we have to hardcode the DSO name in the table (Deletion of WDSO (Write-optimized DataStore object) Load requests and active table data without deleting it from targetSAPNetworkWeblogs%2528SAPNetworkWeblogs%2529)
    Apart from that is there any suggestions or input where i can have selection screen for DSO and execute that will help us to delete the Request IDs and content of active table from WDSO.
    Suggestions or input programs really appreciated.
    Kindly do the needful.
    Regrads,
    Prem
    Edited by: pannalde on Nov 22, 2011 8:24 AM

    Hi,
    http://help.sap.com/saphelp_nw04/helpdata/en/2d/677b3c513d3311e10000000a114084/content.htm
    With program RSSM_DELETE_WO_DSO_REQUESTS it is possible to delete old requests in the Write-Optimized DSO, exactly like we are used to do with PSA requests via a Process Chain.
    This program is available as of SAP NetWeaver BW 7.01 SP07. See note 1437407 for details.
    You can automate the deletion of old WO requests by using the ABAP program step in the Process Chain.
    Regards,
    rvc

Maybe you are looking for