Delete an released transport

I have accidentally marked a transport as released when I unlocked it in se03. As such, I was not able to delete it any more. Is there any way to reverse this action so I can delete it?
Thanks,
Sharon

I would never change the table since there are more depended tables...
Anyway, you can
But you have to chnage status of the request:
Use transaction SE38 or SA38 and run program: RDDIT076
Set your request number and run the program
After request is shown double click on it
You should be able to change status from R to D
And now, you can delete the transport for example in transaction: SE10...
Help on ABAP: Few Tips for Transport Request Manipulation

Similar Messages

Is it possible to delete a released transport

Hello
I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

Hi Tina,
You would need to use direct database access to delete a released transport request.
As I told you before, I would NOT do it as it is hasardous et may generate security audit problems.
You can also destroy your transport system.
Transport requests are stored in table E070.
We only modify the e070 table after system copy by database refresh to reset the next transport request number. It is done by inserting a line in the table. We never delete inside this table.
Use at your own risk !
Regards,
Olivier

Is it possible to delete a released transport request

Hello
I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

You can but you have to chnage status of the request:
Use transaction SE38 or SA38 and run program: RDDIT076
Set your request number and run the program
After request is shown double click on it
You should be able to change status from R to D
And now, you can delete the transport for example in transaction: SE10...
Help on ABAP: Few Tips for Transport Request Manipulation

Is it is possible to delete released transport requests...

Hi Experts,
I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
Thanks & Regards,
RAJ

HI,
Its not possible to delete the released transport request. You should have to follow transport procedure .
T-code for Transport Connection- Check in SE09/se10 for creating requests.
For collecting objects you have go Transport connection without missing the objects.
SE03 for checking the Request objects.
Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
Thanks
sudhakar.

How to delete released transport request

Gurus,
We are doing a system synchronization and for that we are going to make a system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
But in BWQ there are some transports which are already released and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
(For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
So please guide me how to delete these released transports in BWQ.
Thanks
MK

Hi MK,
Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
In this way it only deletes from import queue.
Hope it Helps
Srini

Delete Release transport request

Hi Gurus,
I need to delete a transport request which is already release. Please let me know what is the best way to do that.
Thanks
Liza

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Database tables holding details for a non - released transport request

Dear All,
We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
SAP kernel release 7.00, kernel patch number 173
Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
The problem is the following :
We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
We are now facing the following conflict :
One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
( This was done during the day of the data corruption)
When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
'Request lock on non u2013 existent task / request DEVK921426'
No details for the transport request DEVK921426 exist in either of the two directories :
/usr/sap/trans/data , /usr/sap/trans/cofiles
The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
Any clues would be highly appreciated.
Thank you in advance for your cooperation.
Best regards.
Reda Khalifa

Dear Volker,
Thank you very much for your interest.
The transport request of interest did not appear in transaction code SE03
Eliminating the record from table TLOCK indeed did solve the problem.
Thank you again.
Best regards.
Reda Khalifa

Is there any way to remove a released transport from the SE10 display?

Is there any way to remove a released transport from the SE10 display or change the owner of a released transport?

Hi Joe
Transport Request once released can not be deleted. We can ignore sending the release request for further systems.
Kind Regards
Eswar

How to delete 100+ released requests from the import queue?

Hello
How to delete 100+ released requests from the import queue?
One by one or there is more convinient way?
Thanks

To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
1) Highlight the status field of the import queue.
2) Sort the import queue by the status.
3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
5) Go to menu option Request > Delete.
If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

Function module related to release transport request

Hello experts,
I am working on product management system hierarchy. The hierarchy is like
PRODUCTSSUBPRODUCTVERSIONPACKAGE
we can create transport for VERSION directly from CONTEXT MENU. Next step is download transport to client PC I have done with it. FInal stage to release transport directly from context menu. For this i am searching for appropriate function module. If anybody know which function module to be used for transport request release please share it with me.
Thanks,
Avadhut

Hi,
You can use TR_RELEASE_REQUEST to release a transport request directly.
The class CL_CTS_REQUEST is also worth looking at.

Function Module to identify released transports

Hi,
We required one function module or table where we can find the released transports in target system.
Suppose if we release one transport in developement, before importing to target system i want to identify the released trasport details in test system.
Thanks in advance
Raju

First Thanks for your replies
Actually we required one way (function moudle or table) to find the released trasnports in target system.
As i explained earlier, suppose if i releae one request in development system, we want to find the that released transport test system, before importing to test system.
Thnaks,
Raju

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

Releasing transport request taking long time

Hi All,
I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
In SM50, i didn't find any processes running.
Can anyone tell me the solution.
Thanks & Regards
Uday

Hi Uday,
>> I am releasing transport request in SE09, for releasing child request it was taking long time and for parent request taking much more long time.
You didn't note what release your are running on, but you can check the note 1541334 - Database connect takes two minutes
>> In SM50, i didn't find any processes running.
It is normal, because the system exports the transport request by "tp" command at the OS level, after TMS complete its job on a DIALOG wp.
Best regards,
Orkun Gedik

Problem of calling BAPI to release transport request

Dear Friends,
I want to automatically release Transport Request using BAPI (BAPI_CTREQUEST_RELEASE), but I met a difficult during the process that only TR TYPE 'K'or 'W' can be release using this BAPI, if I create an addon program which TR Type is 'S' (stand for Development/Correction), then this BAPI does not work.
BTW, you can refer table E070.
Could you please kindly give me some idea to solve this problem?
Thank you in advance.
Best regards,
Nick

Dear Li Nick,
The reason that you cannot release a request of type 'S' is that type 'S' names a local correction, which cannot not be transported (and therefore of course not released).
Regards, Tino

Delete an released transport

Similar Messages

Maybe you are looking for