Is it possible to delete a released transport

Hello
I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

Hi Tina,
You would need to use direct database access to delete a released transport request.
As I told you before, I would NOT do it as it is hasardous et may generate security audit problems.
You can also destroy your transport system.
Transport requests are stored in table E070.
We only modify the e070 table after system copy by database refresh to reset the next transport request number. It is done by inserting a line in the table. We never delete inside this table.
Use at your own risk !
Regards,
Olivier

Similar Messages

  • Is it possible to delete a released transport request

    Hello
    I wander is it possible to delete a released transport request. Is it possible to delete a transport request with released only an task

    You can but you have to chnage status of the request:
    Use transaction SE38 or SA38 and run program: RDDIT076
    Set your request number and run the program
    After request is shown double click on it
    You should be able to change status from R to D
    And now, you can delete the transport for example in transaction: SE10...
    Help on ABAP: Few Tips for Transport Request Manipulation

  • Delete an released transport

    I have accidentally marked a transport as released when I unlocked it in se03. As such, I was not able to delete it any more. Is there any way to reverse this action so I can delete it?
    Thanks,
    Sharon

    I would never change the table since there are more depended tables...
    Anyway, you can
    But you have to chnage status of the request:
    Use transaction SE38 or SA38 and run program: RDDIT076
    Set your request number and run the program
    After request is shown double click on it
    You should be able to change status from R to D
    And now, you can delete the transport for example in transaction: SE10...
    Help on ABAP: Few Tips for Transport Request Manipulation

  • Is it is possible to delete released transport requests...

    Hi Experts,
    I had created transport request and it is released, moved to quality with errors. I dont know why I am getting errors while transporting the request, Now I am creating another transport request. Is it any possibility to delete released transport request or is there any solution for this. why I am getting errors while transporting from dev to quality.
    Thanks & Regards,
    RAJ

    HI,
    Its not possible to delete the released transport request. You should have to follow transport procedure .
    T-code for Transport Connection- Check in SE09/se10 for creating requests.
    For collecting objects you have go Transport connection without missing the objects.
    SE03 for checking the Request objects.
    Go to transport connection in RSA1 Select u r Data target or report what ever it may be in development sys & select only necessary objectsu2026 click on transport optionu2026u2026it will ask the transport request create new req. go to SE-9 release the objectu2026go to STMS import u2026RELEASE The objects in quality sysu2026same procedure to production sys.
    Thanks
    sudhakar.

  • How to delete released transport request

    Gurus,
    We are doing a system synchronization and for that we are going to make a  system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
    But in BWQ there are some transports which are already released  and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
    (For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore  these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
    So please guide me how to delete these released transports in BWQ.
    Thanks
    MK

    Hi MK,
        Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
    In this way it only deletes from import queue.
    Hope it Helps
    Srini

  • Delete Release transport request

    Hi Gurus,
    I need to delete a transport request which is already release. Please let me know what is the best way to do that.
    Thanks
    Liza

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • Urgent Correction: Release transport request (transport is red)

    Hello!
    Has some one experience to solve the problem bellow:
    By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
    If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
    AGR_1016 table class is 'C'. Entries are only imported to client '000'.
    AGR_1016B table class is 'C'. Entries are only imported to client '000'.
    AGR_PROF table class is 'C'. Entries are only imported to client '000'.
    AGR_USERT table class is 'C'. Entries are only imported to client '000'.
    AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
    Main import
    End date and time : 20071115141115
    Ended with return code:  ===> 8 <===
    The question is:
    I would like to copy some existing role to  cutomer's namespace Z... save the rolle and transport the role via CharM.
    Is it usual to get the error I get?
    Thank you very much!
    regards
    Thom

    Hi Liza:
    You cannot delete released transport requests.
    Don't import them into QAS or PROD.
    If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
    As you know if you released a request, you can ignore it without moving it anywhere.
    Ram Chamarty
    Message was edited by: Ram Chamarty

  • Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

    Well then maybe you could take a screenshot because the appearance of such a window is news to me.
    Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
    To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
    If you can't find it on your Desktop look in your Documents or Downloads folder.
    When you post your response, click the "camera" icon above the text field:
    This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
    ⌘ Shift 4 and then pressing the space bar captures the frontmost window.
    ⌘ Shift 3 captures the entire screen.
    Drag the screenshot to the Trash after you post your reply.

  • Is it possible to delete a vendor list?

    Hi experts
    Is it possible to delete a vendor list?
    I canu2019t delete it.
    1. Option delete is not available for the vendor list header,
    2. I canu2019t inactive or delete all items because the system shows me next message: u201CEnter at least one item that is active or undergoing checksu201D.
    Thanks in advance.
    Raúl.

    unfortunately , it is not possible to delete vendor list....
    only released supplier lists will be considered for source of supply , so if you dont want the system to consider the vendor list --> you can change the status to hold...
    and it will not be considered further..

  • Releasing transport requests with job roles take forever after upgrading to Netweaver 7

    Dear experts,
    Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
    For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
    Afterwards, the import in our QAS and PRD system don't take longer than normal.
    Apparently this time is taken by the Export phase:
    Checks at Operating System Level   
    17.04.2014 09:50:03
    (0) Successfully Completed
    Pre-Export Methods                 
    17.04.2014 09:50:37
    (0) Successfully Completed
    Export                             
    17.04.2014 13:51:02
    (0) Successfully Completed
    Does anyone know what causes this and how to solve?
    Kind regards,
    Nicolas

    Hello Nicolas,
    What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
    To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
    Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
    Hope this helps to investigate the issue
    Regards,
    Archana

  • Install SP4? possible to delete previous sp's and hotfixes?

    SP4 is available for BO XI R2.
    When I install SP4 is it possible to delete the previous SP's and Hot fixes or should all the sp's and hot fixes installed on the server still be available?

    Hello John,
    Service packs are cumulative, so you'd install SP1, then SP2, then SP3 then SP4.
    You wouldn't be uninstalling a Service Pack before installing new ones.
    As for FixPacks, they're built against a specific Service Pack, denoted by the major number.  For example, if you want to install FixPack 3.7, you'd ensure that Service Pack 3 was installed first.
    There are some full-install packages, so customers can install a fresh copy of XI Release 2 SP 2 or XI Release 2 SP 4.
    Sincerely,
    Ted Ueda

  • Database tables holding details for a non - released transport request

    Dear All,
    We are implementing SAP ECC 6.0 u2013 ABAP stack, on IBM iSeries / System i, i5/OS V5R4 -
    SAP kernel release 7.00, kernel patch number 173
    Could someone please guide me to the database tables holding the details for a non u2013 released transport request.
    The problem is the following :
    We encountered some data corruption in the database of our development system, so we did a restore from the previous day's backup (RSTLIB  command) for the database library : R3DEVDATA, without restoring the /usr/sap/trans  directory, then we did an APYJRNCHG command for the journal receiver spanning from the previous day's backup until the corruption time (remote journal on a remote system.)
    We are now facing the following conflict :
    One of our programmers is now un-capable of updating an ABAP program, which he previously added in a transport request, which he did not release.
    ( This was done during the day of the data corruption)
    When the programmer is trying to update the ABAP program through the ABAP workbench, he receives the error :
    'Request lock on non u2013 existent task / request DEVK921426'
    No details for the transport request DEVK921426 exist in either of the two directories :
    /usr/sap/trans/data   , /usr/sap/trans/cofiles
    The way I see to solve this conflict (eliminate this lock) is to delete the different entries related to the un-released transport request from the database tables.
    Any clues would be highly appreciated.
    Thank you in advance for your cooperation.
    Best regards.
    Reda Khalifa

    Dear Volker,
    Thank you very much for your interest.
    The transport request of interest did not appear in transaction code SE03
    Eliminating the record from table TLOCK indeed did solve the problem.
    Thank you again.
    Best regards.
    Reda Khalifa

  • Is there any way to remove a released transport from the SE10 display?

    Is there any way to remove a released transport from the SE10 display or change the owner of a released transport?

    Hi Joe
    Transport Request once released can not be deleted. We can ignore sending the release request for further systems.
    Kind Regards
    Eswar

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • Is it possible to delete files from time machine?

    Is it possible to delete files from time machine? I had a drive crash, restored the files to a new drive, and now the old versions and the new versions of the files are both backed up, taking up a mountain of drive space. Do I just have to wait 'til the drive gets full and then tell it what to delete first?

    Hi, I need help in a related problem. I have 500gb time capsule. I needed larger hard drive, so I now use TM to back up to a different 1tb hard drive. So I don't need the TC as a TM back up device. But I want to use the TC's hard drive as an extra external hard drive. I deleted the files that were on it. but it still shows it has a sparsebundle file with a size of over 400gb ( probably the size of the old backups). When I use disk utility to try to erase it, I am not offered the erase tab. This "disk" does show on the desk top as a mounted disk (I think) with only 53 gb free. How can I set this up so all the disk space is free and I can use it for storing files, not as a back up? Thanks

Maybe you are looking for