Delete Button doesn't work

I have 2 accounts in my Inbox. When the Inbox is highlighted in the Source list ( as opposed to highlighting one of the 2 .Mac accounts) the Delete button works fine when highlighting a message that will be moved to the Trash. However, when an individual account is highlighted and I want to move a messsage to the Trash, the Delete button won't work. Any thoughts ?

It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

Similar Messages

  • TS2771 What should I do about the backspace key/delete button doesn't work?

    The backspace/delete key doesn't work on my son's ipod touch.  What can I do?

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • Table delete button doesn't work with Virtual Forms

    I applied all of Winston Prakash's tips to my project table (http://blogs.sun.com/winston/category/Creator), but my table is not the only component in the page, so I had to use Virtual forms.
    When I add the "Delete" button, i have to put it on a Virtual Form. I followed the steps on the multi selection table and the "Adding a button panel to the table component header" post, but when I select a row, the JavaScript works well (the row changes to yellow)... but the action code gets a :
    getTableRowGroup1().getSelectedRowsCount()==0
    and getTableRowGroup1().getSelectedRowKeys().length==0.
    I tried almost everything with the forms... I don't know what I missed...

    It works for me. Is it the Delete button in the Toolbar that doesn't work, or the Delete key in the keyboard, or what? Doesn't any other way of deleting a message work either (e.g. Edit > Delete)?

  • Delete button doesn't work in tabular form after upgrade from APEX3.2 to 4

    I just upgraded the APEX from 3.2 to 4.0. However, my application is not working anymore.
    First of all, my delete button in tabular form is not working. When I select a row and click the delete button, the row is not deleted, however the message showed 1 row is deleted.
    Could you anybody tell me how can I debug this problem?
    Thanks a lot !

    I had the same problem. I first tried the solution above, but that didn't work. I also had a derived column for a custom popup and some display only columns. I removed the derived column and took out the display columns from my query. I then made sure my column order matched the source query. I applied changes and the delete button worked. FYI. I found out by some testing that it was actually trying to delete from the table, but with the wrong id. My first editable field was qty so if the qty was equal to 2 it then tried to delete from the table where pk=2(I had to restore that record). I believe it is related to the bug above. Backup your app first. I always do before I mess with the tabular forms.
    Jeff

  • Delete button doesn't work in deleting files in Windows Explorer

    Anyone is facing this problem? Delete button just works when deleting the letter we are typiing. Anyone can share if you are facing this problem and how to fix? thanks a lot.

    Windows deletion is activated from cursor on object right click options where you see rename, delete etc.
    You can delete multiple objects in Explorer's objects/list by putting cursor over 1st object, pressing the shift key and then sliding cursor down or up list to select multiply highlit objects. You right click on the group and can delete from dropdown. This can be used also to multiply rename pictures as well which is useful.

  • The "P" and "Delete" button doesn't work

    While text messaging or emailing the letter P nor the delete button work. Any suggestion?

    try your standard troubleshooting steps:
    power on/off
    reset
    restore
    if those dont work, would probably be a good time to contact apple to get it looked at (in store, if you are near one, or by phone).

  • Help! My "Delete" button doesn't work!

    About a week ago about a tablespoon of a drink landed on my keyboard. I immediately did everything that you're supposed to do. I dried off the keyboard, turned off the MacBook and removed the battery. The next day when I booted the computer back up, everything but my delete button worked.
    I've tried everything I can think of to get a delete button. I've downloaded several "keyboard reassignment" programs, including UControl and Ukelele. I found a program called "fKeys", but that comes with all sorts of crazy warning that it could make your computer crash.
    Any suggestions? I would really appreciate any help that anyone can give.

    You could try restoring the iPod but it may be a hardware fault and need service.
    How to restore the iPod to factory settings.

  • TS1702 Photo delete button doesn't work

    When selecting photos to delete the red delete buttons ineffective

    The links below have instructions for deleting photos.
    iOS and iPod: Syncing photos using iTunes
    http://support.apple.com/kb/HT4236
    iPad Tip: How to Delete Photos from Your iPad in the Photos App
    http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
    Another Way to Quickly Delete Photos from Your iPad (Mac Only)
    http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
    How to Delete Photos from iPad
    http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
    iPhoto for iOS (iPad): Delete photos from iPhoto
    http://support.apple.com/kb/ph3137
    How to: Batch Delete Photos on the iPad
    http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
    (With iOS 5.1, use 2 fingers)
    How to Delete Photos from iCloud’s Photo Stream
    http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
     Cheers, Tom

  • TS3274 delete button doesn't work

    I have been trying to delete multiple photos that I imported from my Macbook. It will let me select the photos, but when I touch the red delete button it does nothing. What should I do?

    Synced photos cannot be deleted on the iPad. Only photos taken with the iPad and transferred with the Camera Connection Kit can be deleted.
    You need to delete the photos in iTunes and sync again.

  • My backspace/delete button doesn't work?

    yeah, basically what the question says.. i can't backspace anything.
    i have a macbook air that has os x version 10.8.3 if that helps.
    i've restored everything keyboard wise already, and still nothing has worked.
    i've updated my software and everything else you should do before asking what's wrong.
    has this happened to anyone else? is there a solution? thanks!

    When several keys in a row don't work my first two thoughts are that the keyboard ribbon has come partially loose or that a small bit of something was spilled on the keyboard. In either case a trip to an Apple store or repair center is probably your next step.

  • "Submit to SAP" Button doesn't work

    Hi to all,
    I'm trying to develop an interactive form using NW04 SP22. My problem is that the submit to sap button doesn't work. I think I have not properly installed active component framework (ACF) on my client pc but I can't find the right ACF to install. I found a note 766191 in which I can download ACF for SP22 but  the link [url]https://sapmats-de.sap-ag.de/download/download.cgi?id=OZOHD0204MQQADJPWOZSGFDNCP39PBJ6TFA2CANJKUPYIGJF16[url]  seems not to work. Where can I find it?
    Thank you very mich,
    Enrico

    Hi Enrico,
    You can download it from the below link:
    http://www.esnips.com/web/arafatfNewFolder/
    Let me know once you are done so that I will delete the link.
    Regards,
    Arafat

  • EDIT button doesn't work in smart web printing.

    My edit button doesn't work at all in smart web printing.  I can clip & print okay but I can't edit my clips at all.  I have vista & ie8.  When I click edit, everything grays out in the smart web window & ie8 stops working. I have to recover my tabs but smart web is still grayed out. I have updated to the newest smart web numerous times but keep having the same problem, Please help!!!!

    Reinstalling iPhoto would be the way to go. Hit F4 on the keyboard, hold your mouse on the iPhoto icon until it starts jiggling, then click the black cross that appears in the top right of it. Then, head to the Mac App Store (click the Apple in the very top left, it's the 4th one down) and then reinstall iPhoto. Deleting the iPhoto app shouldn't delete your iPhoto Library, but if you're worried, you can always make a backup... Time Machine will do it, otherwise - manual!
    Go to Finder. Then in the menu bar along the top, click Go, then Home, then Pictures. In the pictures folder, you'll find the photo library file. Copy it to your desktop or an external disk.
    Hope this helps

  • A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

    A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

    I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

  • Can't lower voice memo volume. My decrease button doesn't work anymore. Any other way i can lower it without disabling speaker

    Own an iphone 5. Can't control voice memo volume from anywhere that deals with volume on my phone. My decrease button doesn't work. I have to listen to my voice memos on full blown volume. Can't lower it from settings or from music. Help please!

    Hi,
    thanks for your answer. 
    The Size of all disks is: 6 x 4 TB.
    In the Pool are 5 x 4 TB plus 1 x Hot Spare. 
    It comes up to about 14,6 TB of Data formatable.
    But tried it also with just 3 x 4 TB to see if it works. 
    I just made a Raid5EE on the controller and then used Storage Spaces with simple, all worked fine. 
    Here the results of my tests: 
    1) your command had to be modified (typoe in usemaximumsize, and had to add -ResiliencySettingName Parity. 
    new-virtualdisk -friendlyname testpsh -storagepoolfriendlyname test -ResiliencySettingName Parity -usemaximumsize
    But anyway, my problem is not creating the virtual disk, but formatting the partition if it's parity only. 
    I added a screenshot: 
    Here you see my storage pool, and I added 3 virtual disk. 
    1 simple, 1 mirror, 1 parity. Only the parity cannot be formatted. The others can. No mather which size I do. 
    About a testserver, I added 4 x 4 TB to a VM (VHDX-files) and could do parity without problems. So it seems it is this server specific.
    As it worked with another controller, I really wonder if the controller could break parity of Storage Pools?
    The other weird part is, it sais "Raid" as BUS, but it's set to pass through, in details I see the serial of the attached HDD. 
    This is what properties shows on this volume. Always RAW. 
    I also tried Software Raid5 within the server. 
    This also worked fine. So really only parity. 
    Thanks
    Patrick

  • My screen if frozen and I can't shut off my phone. I already have my assistiave touch button on my screen but it still own't let me shut off my phone. And my lock button doesn't work either

    My screen is frozen on the camera and my phone won't let me shut it off. My lock button doesn't work and my assistance touch button won't let me shut it down either. My phone also takes hours to die and my battery if fully charged so i can't wait for it to die i need to get it back to normal asap! How do I get it to unfreeze?

    A reset is when you press and hold both the home and sleep buttons for 10 seconds or so until the Apple logo appears. You won't lose any data. Give it a try.

Maybe you are looking for

  • Why can't I access the internet from my ipad2

    This problem started after the most recent update. Hotspot is on my iPhone4, carrier is Verizon. Did not have this problem before update. Do I need to restore iPad to original? What do you think?

  • An unknown error occurred (-50). There was an error in the iTunes store. Please try again later.

    An unknown error occurred (-50). There was an error in the iTunes store. Please try again later. I receive this message when prompted to type in log in information while attempting to authorize my computer and when i attempt to log in to the itunes s

  • Converting a linkedlist to an array

    I currently have a program which reads in values from a file and stores them in a linked list, but i would like to convert this linked list to an array so i can use my bubble sort code on it which ive already got and it works by sorting through an ar

  • Acrobat Standard 7

    Can i flatten a pdf form with Acrobat Standard 7?

  • Oracle.forms api

    I need the oracle.forms api for javabeans development, but i am unable to find it. I have the JDAPI api, thats not what i want. ( I have searched oracle.forms api & documentation on google but i am unable to find them. the link : http://www.oracle.co