Delete previous check sum error

delete from     Exception getObjectNameDefaultPSchema("L", "SNP_CHECK_TAB", "W") :
where     SCHEMA_NAME     = 'ODI_POC_TGT'
and     ORIGIN           = '(12002)COE_Project_Stock_Transactions.Int_Customer'
and     ERR_TYPE           = 'F'
Please help as to why I get this error again and again ?

I am also getting the same error ,This is because of colon (:) at the end of First line in your sql statement.If you delete this colon and restart the session then it will work properly.But i don't know Why this colon is added for most of CKM steps.
Jai

Similar Messages

While importing a request error message' Check-sum error in data file'

Hi Friends
I have a problem.
We are trying to inport a request after putting the files in cofile and data file folders( 4.6C System).While doing so an error message is seen in the log " Check-sum error in data file after XXXX bytes".
Can some one help me with this?
Thanks
Regards
Ankur

Hi Ankur,
It is sure your file is corrupted or not present.
Check in cofiles and data directory under /usr/sap/trans your transport request number.
Best Wishes.
Kumar

SAPinst stuck while installing ECC 6.0 Ehp4 - check sum error

Dear All
I am installing ECC 6.0 EHP4. While installing i am stuck in 4th step Unpack SAP Archives.
error log from SAPinst is below:
ERROR 2011-12-14 16:19:03.118
 CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
TRACE 2011-12-14 16:19:03.118 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2011-12-14 16:19:03.196 [sixxcstepexecute.cpp:950]
FCO-00011 The step unpack with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_Unpack|ind|ind|ind|ind|8|0|unpack was executed with status ERROR ( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).).
TRACE 2011-12-14 16:19:03.227 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option Enhancement Package 4 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > Central System > Central System( Last error reported by the step :Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/CENTRAL/. </body></html>
Please suggest me how to remove this check sum error
thanks
sandeep

Hi,
ERROR 2011-12-14 16:19:03.118
CJSlibModule::writeError_impl()
MUT-03011 Execution of the command "C:\DOCUME1\ADMINI1.SAP\LOCALS~1\Temp\1\sapinst_exe.208.1323859657\SAPCAR.exe -x -v -g -i -R D:/usr/sap/ECD/SYS/exe/uc/NTAMD64 -f D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR," finished with return code 12. Output:
SAPCAR: processing archive D:/ext/51036972/OCL_WINDOWS_X86_64/OCL10264.SAR (version 2.01)
x classes12.jar
x dbclient.lst
x full
x full/oraociei10.dll
SAPCAR: checksum error in D:/usr/sap/ECD/SYS/exe/uc/NTAMD64/full/oraociei10.dll (error 12).
Above error implies some problem in extracting the OCL10264.SAR file from your DVD path.
There are 2 options
1) Try to extract that file manully using the command
 sapcar -xvf d:/ext/51036972/OCL_Windows_x86_64/OCL10264.SAR
 If this works, then try to update your SAPINST.EXE and repeat installation process
2) In case step 1 fails, then your source is corrupt. You need to re-download or recopy the Oracle Client DVD.
Hope this is useful.
Regards,
Deepak Kori

Check Sum Error A215-7427

I have developed a new problem. Almost every time I start up the computer I get a check sum error. At first it would not come up at all, now it will after pushing <F1>, or going into bios. If I shut the computer down and immediately boot it up, there is no error. I have had a system battery error, but it doesn't appear very often and the date is correct.
Other symptoms include the battery level in the system tray always shows 100%, and plugged in, no matter what state it is in. The Fn key no longer brings the options down, nor does it put the computer to sleep with <FN><F4>. I have the computer set to put it to sleep when I close the cover, but that does occur either. When I put it to sleep, and open the cover it boots, gives me the check sum error and then tells me that windows did not shut down right.

You have multiple problems and probably are going to need multiple solutions.
Checksum errors are typically caused by settings in the Bios or the RAM. Make sure that you have the latest Bios. Next, go into the Bios and set the Bios to its default, Save & Exit. See if that takes care of the Checksum error. If not, look at your RAM. Remove one module, leave the other one in and see if that takes care of the Checksum error. If not, switch the RAM and try again.
Are you sure that the computer set to go to sleep when the lid is closed? Go to Control Panel. Click on the Power Options icon and then click on Change plan settings under whichever power plan that you are using. Now click on the "Change advanced power settings" link toward the bottom of the window. A new window will open. Click on the plus sign (+) to the left of Power buttons and lid. Finally click on the plus sign (+) next to Lid close action. Verify that the computer is really set to go to Sleep when the lid is closed. If not, hit the down arrow to select Sleep mode, click the Apply and OK buttons at the bottom of the screen and the sleep problem should be gone. If not, you probably have a Windows problem and may have to reinstall the operating system.
The FN key combinations are run thru the Toshiba Value Added Package for Windows Vista. Reload the program and try again. The program is on your Recovery CDs and this website.

Msi-6390:cmos check sum error

please help me:
i bought a 6390-msi motherboard.
the problem is that when i start the system after checking the ram and cpu (it understand the correct cpu and the correct amount of ram) this message appear:
"Cmos check sum error.loaded default"
and when ever i change any thing in the setup program and save the changes (for example changing the boot sequence in the bios features) the system doesnt boot again and i have to clear the cmos by changing the jumpers.
i asked some expert ,they said maybe the problem is the battery ..but i changed the battery but the problem is still appear.
please help me ...
thx :(

There's a slight chance that you got a dud battery, or dirty contacts on the battery holder.
Check the battery voltage reading in the BIOS settings - it should be at least 3.0V (a fresh battery should be around 3.2V).
As I said, it's only a slight chance that it's the above problem, but when the obvious solutions don't work, you have to explore the more obscure choices.
Cheers

Error message "bad check sum" on Satellite pro 6100 when starting up

I recently tried to turn my laptop on when i got the message "bad check sum"(i think it said that) "check system press[f1] to continue. After i pressed f1 it came up an options screen i didnt do anything to it and just continued then it loaded and shut down again. also i have to lie the laptop on its back just for the first green LED to come on and when i have the battery in the charger does not charge the battery and even when it does start to charge and i try to put it on the same sequence of orange LED's appear .
so what does the message bad check sum mean ?
thanks

Hi,
That means that the cmos (bios) battery is low on power and you should hang your machine for minimum a day on AC because the bios battery loads then.
Such error appears when your cmos batt. is not full then the bios losts his settings and the checksum which would be performed by the system at startup will be faulty since the bios needs a check to know if everything is OK.
Its a security feature which indicates if your hardware is ok or not. If the error appears more than once, then you should bring your machine to a technician or at least a local servicepartner for a checkup.
Greets

Error in the generation of check sums of library

Hello
I am getting below error when trying to logon to xMII.
com.sap.engine.services.deploy.container.ExceptionInfo: Error in the generation of check sums of library files of application sap.com/xappsxmiiear in operation startApp.
This is a new installation on windows 2003 on SQL server.
Server is up and running clean with out any issues.
But not able to logon to the home page.
Regards
Basis Dude

Every time I have to manually start service "sap.com/xappsxmiiear " in VA.
But if I restart system it is not comming up automatically, I have to manually start again.
Any one had same issue before ?

ITunes keep showing unknown error 48 while restoring iphone 4s. I've already followed applesupport suggestions of reinstalling iTunes, deleting previously downloaded ipsw on my computer and re-downloading it (countless times!) but still to no avail.

Hi. A very much help needed.
- iTunes keep showing unknown error (48) while restoring my iphone 4s
- I've already re-install iTunes various times
- Already delete previously downloaded 8.3 ipsw and re-downloaded it countless times
- Changed and edited hosts in windows drivers as per shown on guides
but... to no avail!!!!
I am now without any phone to be used.
HELP ME PLEASE

Hello Sean,
It sounds like you are constantly needing to restore your phone because it keeps going into recovery mode. Usually putting a device into recovery mode and restoring it can help isolate an issue to your iPhone hardware if an issue persists afterwards. I would try manually putting it into recovery mode and restoring it 1 more time:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
If that does not resolve it the symptoms indicate to me that it is a hardware issue causing this to happen and would seek service for it:
iPhone Repair - Other Repairs
https://www.apple.com/support/iphone/repair/other/
Thank you for using Apple Support Communities.
All the best,
Sterling

How can I change a check sum in a tabular form

How can I change a check sum in a tabular form?
I have added an extra field and now get an error when updating because I need to change the check sum, how do you do it?

Question asked and answered many times !
Insert a section break just before the page to move.
Insert a section break just after the page to move.
Select the page's thumbnail
cut
Insert a section break where you want to insert the page.
paste
The required infos are available in Pages User Guide which isn't delivered to help helpers to help you.
Yvan KOENIG (VALLAURIS, France) mercredi 5 octobre 2011 14:33:24
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

No checking Group error

Hi Experts,
I have a sales order for which when I create delivery I am getting no checking group error but when I check availability check in the material it is there.
You can see Availability is there in the material master
Please advise what other items should I check ?
Thanks in advance for your help !

This seems to be message VV083. This is raised here:
Include FV45VF0B_BESTAND_BEDARF_ABGLEI
IF ( T459K-BEDSD NE SPACE OR T459K-ATPPR NE SPACE ) AND
       VBAP-MTVFP IS INITIAL.
    IF NEUTERMINIERUNG EQ CHARX.
      MESSAGE ID 'VV' TYPE CHARE NUMBER 083 WITH VBAP-VBELN VBAP-POSNR.
    ELSE.
      MESSAGE ID 'VV' TYPE CHARI NUMBER 083 WITH VBAP-VBELN VBAP-POSNR.
    ENDIF.
    EXIT.
So according to this, the error is raised if VBAP-MTVFP is initial.
Please check if VBAP-MTVFP is initial on the database for this sales document.
VBAP-MTVFP should be filled with the value from the material master when the sales document is created. The following could have happened on your system:
- Sales Document created: VBAP-MTVFP is filled with a blank value as value in material master was blank.
- Material Master was updated with a checking group AFTER the sales document was created. This would not automatically update VBAP (See note 1639349). Compare the creation date of the sales document in VBAK with relevant change documents to see if this happened.
In the above situation, you would have a blank VBAP-MTVFP and the error is justified. You would need to delete the sales document and create again.

Checking for errors in application item computation (at page level)

I have a conditional computation used to set the value of an application-level item.
In the condition, I need to check to see if the action (button-press to initiate DML processing) generated an error (eg cannot delete row because of child records). I don't need to catch/handle any specific errors, I just need to know if an error occurred.
What do I check for? I've seen references on the forum to hidden page items Pxx_msg and Pxx_err, but I've played around with them, and apparently don't know how they're set.
Another thought I had is to create a before-computation process that checks to see if there is some sort of error/exception, but I'm not having luck w/ this either.
Ideas?
Thanks,
C

Max -- I appreciate you helping me to clarify this issue. I need to track which database tables have had data changes committed to them in the course of the app running. My thought is to track this in an application item (a list of changed tables), and check/set the item as needed when delete/create/apply changes buttons are pressed. But if a DML statement fails, I don't want to add the table to the list of modified tables.
When I was setting the app item in a computation, it appeared that (like you said) I was trying to check for errors before the process had executed. (I'm also not sure I was checking for errors in the correct manner.) Regardless, the result was that the table got added to the list even when the delete operation failed because of child records.
What I'm doing now appears to work (and sorry, I can't actually access the app this morning, the server is down, so I may not be able to communicate this as clearly as I'd like). If I recall, yes, I'm setting the item in a post comp/validation process. I'm still not doing any error checking, but it appears that if there is an error, the process isn't executing: the item is definitely not getting set.
Can you clarify what you mean when you say that "all of this will execute before the processes". Do you mean that comps and page processes will execute before DML is executed on the database?
Thanks,
Carol

[svn] 1555: Reverting my previous check-in as these files were supposed to go to 3.0.x .

Revision: 1555
Author: [email protected]
Date: 2008-05-05 08:01:54 -0700 (Mon, 05 May 2008)
Log Message:
Reverting my previous check-in as these files were supposed to go to 3.0.x. My TortoiseSVN got confused for some reason (I probably copied hidden svn files without realizing)
Removed Paths:
blazeds/trunk/apps/team/features/messaging/selector/messaging_AMF_Poll_Subtopic.mxml
blazeds/trunk/apps/team/features/messaging/selector/messaging_HTTP_Poll_Subtopic.mxml

Hi Chris,
 First of all, the entire context of the xsd is too long, it could discourage other people from reading the entire post. Please refrain from posting the entire document.
 The xsd is not well-formed, that should explain the errors that you are getting when activating the external definition. I'm pasting a valid xsd that could be read in XI: It should look like this (this is a simple example only)
<?xml version="1.0" encoding="ISO-8859-1"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:complexType name="Details">
 <xs:sequence>
 <xs:element name="Location" type="xs:string" minOccurs="0"/>
 <xs:element name="product" type="xs:string" minOccurs="0"/>
 <xs:element name="MovementType" type="xs:string" maxOccurs="9999" />
 </xs:sequence>
</xs:complexType>
<xs:element name="Flat" type="sh:Details"/>
</xs:schema>
You may need to recode the same XSD to fit like the structure above...
Regards

I am not able to download an ebook to my PC. I have windows 7 x64. I get a "Check Activation" error. The question is that I have 2 Adobe users. I have the ebooks associated to one of them but every time I download Adobe Digital Editions, independently fro

I am not able to download an ebook to my PC. I have windows 7 x64. I get a "Check Activation" error. The question is that I have 2 Adobe users. I have the ebooks associated to one of them but every time I download Adobe Digital Editions, independently from what user I download it, it always create the Adobe Digital Editions associated to the worng user. If I try to delete the Authoritation it says that it is nor posible and recommneds me to try later, but I never get it.

This is a user-to-user forum, and although Adobe staff make occasional appearances here, there is no guarantee that you will get any "officila" Adobe feedback.
If you have difficulties to install the online installer from http://get.adobe.com/flashplayer/, then download the offline installer http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe; save it to disk, then run it after closing all browser windows.

Deleting or checking in a lost open activity (DTR)

Hello everybody:
A teammate delete a file which is in the DTR. He created an activity and linked this file change into that activity. His computer crash and was necessary to format harddisk before he could check-in the activity. Now we need to work on that file(delete and create again), but when we try to change the file we received this error message:
(FAILED: The file is checked-out-for-delete by another user: [<USERNAME>]) <FILENAME>
When we look the activity report by web browser, we can see the first activity open, but when the activity's owner login in his new NWDS(IDE), he cann't see the open activity and he cann't check-in it.
We are using SAP WAS J2EE SP14 and NWDS SP14.
Do you know how to delete or check-in that open activity?
Thanks
Regards
Olivier

Hi Pascal,
I have a similar situation and I followed your direction and located the activity using the DTR Web UI. Unfortunately, I do not get an option to revert from the dropdown list box (right corner of the activity page) only items
Technical View
Quick Links
So what can I do now to get out of this situation. If the command-line tool is an option, could you tell me what exactly I can do there?
Thanks!

Check Sum on downloadable files for linux e.g.linux_11gR2_database_1of2.zip

Which tool is used to verify check sums on downloadable files such as linux_11gR2_database_1of2.zip ?

Here is my blog which has answer to your question
http://oraclechamps.blogspot.com/2010/04/invalid-block-type-install-error-11g.html

Delete previous check sum error

Similar Messages

Maybe you are looking for