Delete the bad request from ODS.

Hi,
i am tring to delete the bad request form ods object but i am unable to delete the request from ods. i am using full uplaod and the processing is "psa and datatarget in parllel. when i check the data in PSA, it is giving "No data packet numbers could be determi request REQU_5SMPS3MTHYJHHUYQ62AM61H89".
Thanks in advance,
Kasi.

Hi KAsi,
I had a similar issue few weeks back, look in SM50 and chk if there are any processes still running which might lock the object. Also chk in st22 to see if any dumps are created under your login. If tehre are any processes - you can try to cancel them or ask Basis to help u with it.
*I guess* - when you hit delete, the delete icon appears but is not able to lock(enqueue) the object and after sometime the delteion program cannot move forward and hence it returns to original status.
regards
Poonam

Similar Messages

How to delete a specific request from ODS

Hi all,
We have an ODS which we're loading invoices from legacy system. In legacy system, there are two tables for invoices. First one is daily records which is archived on last day of each month. As you guess, second table is for archive records. We need all of the records from both tables. Because of performance issue , we don't want to load both tables everyday . So we created two transformation. Since there is no delta option, we need to delete the first table request from data targets before extraction. And delete the request from the second table only last day of month. We're created process chain. But there is no option for deleting only the request from a specific data source or transformation. Are there any solution for this?
thanks,
Yigit

Hi,
Thanks for your code. But is there any function module to delete most recent request from the ODS.
I had 2 requirements...One in need to delete from ODS & Other one from Cube.
FM - 'RSSM_DELETE_REQUEST' will be used to delete from Cube only.
Can please you send FM & ABAP Code to delete request from ODS.
Thanks in advance.
Yigit
Message was edited by:
Yigit

Deleting the latest request from info cube.

Hi All,
In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
Thanks.

Hello Vincent,
As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
Hope this resolves your issue. Below document explains steps to achieve the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
Best Regards,
Venu Gopal K

Unable to delete Failed Load Request from ODS

Hi Ev'one
I have a strange error.
I try to delete a couple of red requests from the ODS and they do not delete. When i see the log for this Job; it says there is an Invalid table name and i guess the request is also not present anywhere to delete. Any Suggestions on how to resolve this
This table is apparently present in the Prod Sytem and not present in the Dev and QA Systems.
Would appreciate any pointers to cure this.
Regards
Shweta

Hi Shweta,
Go throuh the following OSS NOTE.
We too faced the same problem.It was sorted with SP13
Note 1020120 - P13:DSO: Restarting terminated, deletion w/o ODS request SID
Assign points if it helps...
Regards
Prasad

Unable to delete the bad request,and also not activated.

Hi,
I am having ods1 existing in process chain,it is exporting 4ods.At the 3 ods the request was failed at datatarget level,but in RSMO status shows as green only.
For all the ODSes the data has runned for two days,on first day the request was failed,if i am going to activate or delete its not accepting.plz help me in this issue.update type for that ODS is deltaupdate..
Thanks & Regards,
Aswini.

Hi Ashwini,
In your case, the data was loaded successfully, but the activation got failed.
to confirm that, check the number of records loaded as below.
No. of records loaded.
No. of records available in "New Data Table"
If the data load is successful and there are '0' records in new data table, you can turn the QM status to green and then activate the data.
If still there are records in New Data Table, The failure might be because of the table space problem. Check the short dumps in ST22. You may find a runtime error called "DBIF_RSQL_SQL_ERROR". You'll see a message "Unable to extend table". You can notify this runtime error to Basis team and they can help you out.
If it's not the table space problem, you can delete the request by turning the QM status to red in RSMO/Data target (though it is already red, turn it to red again) .
let me know the source system where you are getting the data from. I can suggest you whether to delete the data.
Regards,
Shashi

Need to delete the SPAM requests from the import queue

Dear all,
There were some issues with my QA system SAP patch application and we were forced to do a DB refresh from our production system. Now our QA system ABAP stack is having an issue with the STMS import queue which shows 4 old patches(witch were applied to the system before the refresh) with u201Crequest will not be importedu201D status. When I try to delete these requests from the import queue it shows the following error
u201CThis is tp version 372.04.29 (release 700, unicode enabled)
ERROR: Client 'ALL' is not possible.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0246
standard output from tp and from tools called by tpu201D
When I try to import a new support package it gives the following error,
Error in phase: CHECK_REQUIREMENTS
Reason for error: QUEUE_NOT_EMPTY
Not sure how these requests arew still in the import queue even after the DB refresh. How can I delete these 4 old requests from the import queue?
The System is ECC6.0 ABAP+JAVA stack with Oracle 10g on Win2003 server.
Thank you,
Siju Sam

Dear Ganesh,
I have tried the steps you suggested, but still the import queue is not cleared.
Now I just wanted to remove these entires from the STMS=>queue=>import queue list.
Number   Request      Clt   Owner          Short Text
     1   SAPKB70013   ALL   SAPUSER        Basis Support Package 13 for 7.00
     2   SAPKA70013   ALL   SAPUSER        ABA Support Package 13 for 7.00
     3   SAPKB70014   ALL   SAPUSER        Basis Support Package 14 for 7.00
     4   SAPKA70014   ALL   SAPUSER        ABA Support Package 14 for 7.00
I think these requests(Patches) are not there in the tp buffer/(import queue) but somehow some table entries shows the status that they are still in the queue. So I just wanted to reset the status that These TPs are already applied.
Thank you,
Siju Sam

Deactivate delta update before deleting the request from ODS

Hi all,
Happy New Year wishes to all.
I have a scenario, where I am feeding the data to ODS from flat file and from ODS to Cube. Here ODS is a Data mart. Flat file to ODS full update and ODS to Cube First Initialization and Delta.
I deleted the latest request from ODS, at the I got the message dialog box and it is saying that
Request 98888 already retrieved by data target BWVCLNT
Delta update in data target BWVCLNT must be deactivate before deleting the request
Do you want to deactivate the delta update in data target BWVCLNT?
So I pressed Execute changes, then after I loaded the data in to ODS and when I am trying to load the data into Cube, once I pressed execute button it is displaying the message dialog box like
Delta request is incorrect REQXXXXXXX in the monitor
A repeat needs to be requested
Data target still include delta request REQXXXXX
If the repeat is now loaded, then after the load
There could be duplicate data in the data targets
Request the repeat?
After execute changes it is showing only zero Records only.
What is that mean and why zero records it is displaying instead of delta records.
Anybody faces this type of problem please let me know. This is somewhat urgent to me
Thanks and Regards
Satish Chowdary

Hi Satish,
First Switch off the ODS ( automatic Update of Datatarget ) , though not really necessary. delete the Req from the Infocube, then delete from the ODS . Now delete the Init Req from the Infopackage for datamart infopackage.then Do an Init without datatransfer into Infocube. Later load data into ODS and then go for delta update to Infocube.
I hope this helps.
Thanks,
Krish
Dont Forget to assign Points.
Dude, you just repeated my answer I gave a few hours ago. Are you hungry for points?

Unable to delete bad request in ODS DATA TARGET

Hi Experts,
I have got an abend in load and need to rerun from POF manually .So i need to delete bad request in ODS .But I am unable to delete bad request in ODS.
Please tell me how to delete request in red.

Hi,
Try to do the following:-
1. Note that bad request number
2. Go to SE16
3. Open table RSODSACTREQ.: Filter the contents by that request number . There will be one entry for that request . Delete that entry
4. Open table RSICCONT. There will be one entry for that request . Delete that entry
5. Open Table RSMONICDP. Filter the contents by that request number . There will be 3-4 entries for that request depending on number of data packages in that request .Delete all those entries
Once these entries are deleted , the bad request will be automatically deleted from the ODS.
Regards,
Satya

Delete overlapping requests from ODS

Hi,
Since it iss not possible to delete overlapping requests from an ods by any automated process like in info cube.
Can we still delete overlapping request using abap code or the only way to do it is to delete data (selective deletion) in a start routine.
Any tips would be helpful

Hi ,
Try the following logic to delete the ovelapping requests from a particular data source.
*& Report ZV_DELETE_REQS *
*&Description:This program is for deletion of eixsting Full requests *
*& from ODS *
REPORT ZV_DELETE_REQS.
data: RSICCONT like rsiccont,
 rsseldone like rsseldone.
data: begin of i_req occurs 0,
 rnr like RSICCONT-rnr,
 end of i_req.
refresh i_req.
select * from RSICCONT UP TO 2 ROWS
 where ICUBE = 'ZCS_D10'
 order by TIMESTAMP descending.
i_req-rnr = rsiccont-rnr .
append i_req.
clear i_req.
endselect.
loop at i_req.
select single * from RSSELDONE where RNR eq i_req-rnr and
 source in ('0CO_OM_OPA_5',
 '0CS_OM_OPA_1').
if sy-subrc eq 0.
 CALL FUNCTION 'RSSM_DELETE_REQUEST'
 EXPORTING
 REQUEST = i_req-rnr
 INFOCUBE = 'ZCS_D10'
 EXCEPTIONS
 REQUEST_NOT_IN_CUBE = 1
 INFOCUBE_NOT_FOUND = 2
 REQUEST_ALREADY_AGGREGATED = 3
 REQUEST_ALREADY_COMDENSED = 4
 NO_ENQUEUE_POSSIBLE = 5
 OTHERS = 6.
 IF SY-SUBRC <> 0.
 MESSAGE ID sy-MSGID TYPE 'I' NUMBER sy-MSGNO
 WITH sy-MSGV1 sy-MSGV2 sy-MSGV3 sy-MSGV4.
 else.
 message i799(rsm1) with i_req-rnr 'deleted'.
 ENDIF.
 do.
 select single * from RSICCONT where ICUBE = 'ZCS_D10'
 and rnr = i_req-rnr.
 if sy-subrc ne 0.
 exit.
 endif.
 enddo.
endif.
endloop.
hope it helps....
regards,
raju

How to delete the single record from the ODS

HI,
I want to DELETE the particular record from ODS.. how to delete that..
plz give me the solution.. it's urgent..
with regards
@jay

Hi Prakash,
You can delete a particular record from ODS by specifying the key field name in Selective deletion button available in Contents tab in the manage screen of ODS. But it will only delete the record from the active data table and not from the Change log and new data table . You should be very carefull if you are doing in Production system as there is chance of deleting other records accidentally.
Go to Selective deletion button - > Click on delete selection -> Enter the key field values of the record you want to delete-> Press save button to save as Variant -> Go back and click on selection button -> Chosse the background job type -> Click on start button.
Regards,
Prakash

How to delete the compressed Request ID in the info cube... ?

Hi BW Gurus,
one of the info package will upload the request in to three data targets and failed due to error with duplicate records. I am able to delete the bad request in two data targets and facing problem with one data target due to the request is available in green and got compressed.
The reasons why i am unable to delete the request in that data target is it is already got compressed and rolledup.
I tried with selective deletion based on same request ID i have done that successfully but the request still presents in the data target. I have checked in listcube and found no data for the request id.
now i have one more question like the request has bring down to status not ok in the monitor and done selective deletion will it be a problem on the data missing please advise me if any data missing will occur for the particular data target.
can any one help on this. Thanks in Advance.
Venkat.

Hi Venkat
You have one way to delete the compressed request
But this is possible only if u have the request in PSA
If the request is in PSA, do reverse posting
This will nullify the particular bad request by changing the press sign into - and - sign into + for all the records went in the cube for that particular request
Regards
N Ganesh

How to delete the Transport Request?

Hi all,
I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in order to release that we don't have setup in Production Box).
Any Idea? I know how to delete that Transport Request. If i try to release that i'm getting TP(Transport Profile error) with return Code 12. it suppose to handle by Basis. My basis consultant is not aware of how to work on this?
Regards,
Nagesh Ganisetti.

I am not sure I understand.
You release the request in the system you created, not in another system (in your case production). It will then go to the import queue of the target system.
Transports will be configured in all the systems in your landscape (including production).
Just by releasing a request, it will not go to the target (unless it is configured so, not likely if the target is production), someone has to import it into the target. I assume you do not want this request to go to target. In this case, release it, then go to STMS, import queue, and delete it from there.
Added -
I now see that the request is in production.
Igore the above in that case.
If you are not able to release it, let it be. If you are doing an upgrade/support pack, you will need to release it.
When you try to delete, what message do you get?
Message was edited by: Ajay Das

Can we able to delete the particular request

HI,
We have code for to deleting all request from Database.
Can we able to delete the particular request from the Database.
For example, I have request start from 100 to 150.
If i want to delete the request : 125, is any way we can pull all requests in the dropdown and delete the particular request.
Pls any one give a suggestion, how can we archive this?
Regards,
Anandh P

Hi Anandh,
Kevin is right you can use the workspace and use a grab (and then abort) to "delete" the instance.
It will no longer be running and will be viewed as aborted.
You can create a custom UI by using the PAPI or PAPI-WS depending on you preferences.
However if I'm not mistaken there is a third option that is the deletion of instances from the database.
I believe there is a PL/SQL procedure that can be run to delete all instances from the database. However this isn't limited to a single instances..
---( Can someone confirm this.. I'm not sure if this is for BPM or just for SOA Suite?) ---
Hope this helps.
Kind Regards,
Nils

Delete a particular request from a InfoCube after compression in sap bi 7

HI ,
Issue : I wand to delete a particular request from a InfoCube after compression in sap bi 7.0 ; (not in sap bow 3.x).
can any one suggests me how to do .give me possible solutions.
Regards,
EdK...

Hi,
You can delete the perticular request from Infocube by useing'RSICCONT'.
Goto SE16, give the 'RSICCONT' then Select your Cube and Select Execuite.
It will display the list of requests. you can select the perticular request and deleted from cube.
Edited by: Suman Reddy.Vuyyuru on Mar 18, 2010 12:38 PM

Problem in deleting the request from ODS......

Hi,
I am not able to delete one INIT request from the ODS. This request was taking long time and eventually it turned to RED. Data was there in PSA but I deleted the request and thought of doing the fresh load .
Problem is that although I have deleted the request from the ODS , it is again coming back to ODS . I have started the fresh load. AS the previous also coming to this ODS its taking long time to load the data.
Can some body let me know how to STOP/DELETE the old request?? I have already turned everything to RED QM status , overall status etc. but still its not getting stoped.
Thanks Jeetu

Hi Jeetu,
Even though u find the job and cancel it or delete it the data load will not stop untill it loads the entire data!
Hope there will be large volume of data !
Until the data load is complete wait and then delete the request and then delete the init and start the fresh load!
I too faced the same issue but i am helpless i could not stop the data load inthe middle!
If you found any solution for this let me also know
Thanks
Ram

Delete the bad request from ODS.

Similar Messages

Maybe you are looking for