Delete Worklist created in Fixed Assets thru AR31

In Fixed Assets, i created and released an worklist using t-code AR01 and AR31 for Cost Center mass change few days back. I cant manually change any cost center in asset master record for those assets already in worklist and it still shows its status as "In Process"! My substitution rule is correct but somehow its not processing further. If you can create and edit worklist, you should be able to delete it as well.
Can you delete the worklist if its in process mode? Do i need to have authorization for it?
Plz help.

First delete the substitution you have created for the work list, also check if you have authorization to delete substitution
Creating and Deleting Worklists
http://help.sap.com/saphelp_nw04/helpdata/en/65/add1a4bd0211d291c70000e8a5f6e6/content.htm
Pls assign points as way to say thanks

Similar Messages

How to create a Fixed Asset Business Area that is restricted to a ledger

Hello gurus,
I am having trouble creating a Fixed Asset Business Area that will only restrict users to use only one type of ledger in Discoverer Admin. How do you go about this?
I know how to create the business area but not sure how to restrict it.
Any guidance is much appreciated.
Thank you.
-Nelly

Hi,
You can restrict users to using one type of ledger by adding mandatory conditions to the folders in the in the business area. The conditions can be dependent on the user and/or responsibility so that different users/responsibilities have access to different ledgers. These mandatory conditions do not show in the workbook and cannot be changed by the Disco plus/desktop user.
Rod West

Creating of fixed asset PR

hİ friends,
I have created the purchase requisiton document type as" Fixed Asset PR" .My guestion is that;
Can I create the two sub diffraction for this PR type? If yes, How I can create the two sub diffraction under this PR doc type?
Is it possible?
take your opinions...

Can you frame question clearly without spelling mistakes ? to get suitable responses.

PO created for fixed asset and other issues

1)Where does asset clearing account or CIP clearing account picks up in while creating a Purchase order for a fixed asset ?Is it from the item itself while defined or any other place ?
2)How does the accounting line flows from Fixed asset to General ledger especially for CIP assets?
3)How can a asset be attached to corporate book and tax book ,what is the set up required ?
Thanks
Jogendra

1)Where does asset clearing account or CIP clearing account picks up in while creating a Purchase order for a fixed asset ?Is it from the item itself while defined or any other place ?
Account gets defaulted from Item if it is there, if not you have to enter manually.But if you have customized your account generator, you have to look at the account generator.
2)How does the accounting line flows from Fixed asset to General ledger especially for CIP assets?
If you are creating a PO for an expense item, and have used CIP Asset Clearing Account in the PO Distributions it gets eligble. When you invoice this PO, this CIP Clearing Account gets Debited.
Cr Liability 100
Dr CIP Clearing Account 100
Obviously as this is setup as an asset account (flexfield qualifiers) this gets eligble for the mass addition transfers once you validate and account the invoice. When you run the mass additions create and post, these accounting entries will get created.
Cr CIP Clearing Account 100
Dr CIP Asset Cost Account 100
These accounts are defined at the asset category. The asset category for the mass additions is taken from the item setup (Purchasing Tab). Ofcourse this can be entirely different in R12.
Asset Book is derived based the asset category. Create Journal Entries program transfers the accounting entries to GL. Assets Creates the entries for the CIP Addition process in FA before transferring them to GL.
3)How can a asset be attached to corporate book and tax book ,what is the set up required ?
First you create a corporate book and then create a tax book and assign corporate book to this. WHile creating the tax book if you check the Allow CIP Asset check box (Tax Rules tab), the asset will automatically get copied into the tax book.
Thanks
Nagamohan

Problems with Mass Changes of fixed assets (Transaction AR31)

Hello all,
I have the next problem: I am trying to make a massive update of fixed assets , by means of the transaction ar31, but the system goes directly to the transaction so01 .
That I must do for being able to execute the transaction of normal way?
Thanks.

I think the same, but I don't understand :
for a simple change better use BDC to tcode AS02.
-> you can use transaction-recorder SHDB
I was investigating and I managed to deactivate wf, now I can execute the transaction, but not successful. The system show the next message " They do not exist responsible for task " and when checking the customizing the fixed assets (OAWF) the task have a responsible.
So I do not know that to do.
I hope you can help me

Fixed Assets - Acquisition created doesn't show

Hi all,
i am having a strange problem while using the SAP Business One Fixed Assets module. Basically i have created a Fixed Assets Acquisition (with no supplier). As soon as i press 'Add' the system shows a message at the bottom saying 'Acquisition posted successfully'. Even though this message is created when i go back on the Acquisition screen that Acquisition which I have just created doesn't show. In fact if you go on the Fixed Assets Master Data details for that Fixed Asset which you used in the Acquisition document, nothing shows under the Documents tab.
Do you have any idea of what might be going wrong?
Thanks

Dear Marvin,
After you create the acquisition, go to journal entries and check the last journal entry to verify if posting has been done in terms of accounting
Regards
Kentish

Fixed Assets Add-On: Depreciation Calculation After Credit Memo

In the beginning of the year, I have a fixed asset as follow:
Cost $16,128,667.00
NBV $14,515,800.35
Planned Useful Life for this asset is 120 months.
In July this year, created a Fixed Asset Credit Memo for this asset at $1,110,942.92.
Originally, before the credit memo, the planned depreciation is $134,405.53 per month which is correct.
After the credit memo, it recalculates the planned depreciation to $124,119.04 per month. How did the system arrive at this figure?
Depreciation method:
Straight line
Full Year

Hi,
Based on NBV $14,515,800.35, minus Credit Memo $1,110,942.92, you got $13,404,856.43. The useful life is 108 based on NBV. So you get new planned depreciation to $124,119.04 per month.
Thanks,
Gordon

Assets (Investment profile): Transfer value from AuC to Fixed asset

Good afternoon all,
We have implemented Assets across investments profile. The settlement of investment is u201CSummary settlementu201D and we do not have u201CList of Originsu201D.
We have created a project and then a WBS that automatically creates the AuC (asset under construction). Transaction code CJ20N.
Then we have created the purchase order (ME21N) and afterwards we have carried out an entry sheet (ML81N) where we have informed the WBS previously created.
Through CJ88 we have done the settlement of the WBS and we have checked it.
Now we have created the fixed asset and we would like to transfer the value of the AuC to the fixed asset. I am not able and I am a bit lost. I do not how to perform it.
Any idea?
Many thanks and regards in advance. Daniel

Hi Renfe,
If the asset is an asset under construction belonging to an investment measure, then the transaction code KO88 needs to be used.
Warm regards,
Murukan Arunachalam

Fix Assets Revaluation Reversal - ABAW

FA Experts,
I posted a revaluation to fix assets thru tcode ABAW. After my reconciliation of the assets I realized that one asset was posted twice for the same amount in revaluation. Before I did thi I change the depreciation key as well.
Does any one knows how to reverse a revaluation amount for a single fix asset?

I was able to reverse the entry by using same tcode ABAW and selecting 897 Revaluation (downward) current year
then re-run depreciation as a repeat and both entries will net out to zero.

Modify fixed asset master data thru migo

Hi experts,
I make PO with account assigment 'fixed asset'. This asset is created during the PO creation. When materials arrive more fields of that fixed asset master data are known (ie serial number). I'd like to have a way to save those data in asset during the GR without using 2 different transactions.
In MIGO t/c i see the fixed asset number and double clicking on it i access to display asset: master data (as i was on AS03 tc).
Do you think a way to call AS02 (change asset master data) thru MIGO exists?
Best regards,
Ruben

Hi Ruben,
Did you find a solution to your problem? I have a similar requirement.
I was planning on using the user-exit MBCF0005 to call a pop-up screen where the user can input the serial number and from there calling the BAPI to update the asset.
Cheers
Wayne

Logical delete flag in fixed assets extract

I have to create a flat file of Fixed Assets data. I am asked to put the 'Logical Delete Flag' in it. My data will be based on the t.code AR01(report RABEST_ALV01). It uses the logical database ADA. My question is where can i find the logical delete flag and what does this field exactly mean?
Plz reply soon

I m closing this thread as I found the answer to it. An asset is never physically deleted in the system. But it can be marked for deletion(logical deletion).

How to create crystal report for fixed assets

Hi,
I am beginner to SAP B1. I have to create crystal report on fixed assets. for the following fields I have to get data.
Fixed Asset,
Cost of Fixed asset,
Disposal of fixed asset
Scrap of fixed asset
Additional cost on fixed asset
Fixed asset cost after additional cost
Rate of fixed asset –Depreciation item cost - Percentage
Depreciation of fixed asset on item cost
write-up cost on fixed asset –write-up
Rate of fixed asset-Depreciation on write-up cost --percentage
Depreciation of fixed asset on write -up cost
Net Book value of fixed asset.
your help here is appreciated.
Thanks,
Challa

Hi,
Actually they are not going to standard reports as Revaluation amount we are creating User defined fields and that needs to be fetched to the report. As well they want original cost, depreciation original cost, Revaluation amount and depreciation on revaluation separately..
As per my understand system will provide one cost and the depreciation on that.
So, can somebody help me in guiding me..
Thanks in advance.
Thanks,
Challa

Deleting Fixed Assets

Hi,
I'm reciving an error during transaction AS06:
"Deleting is not possible. The asset already has values."
the solution in sap is:
"Delete the transferred values using the transaction for changing old assets."
I'm trying to delete those values using AS92, but everything looks locked. Where exactly and exactly how shall I remove this??
Thanks for any help.
Lukas

Hi,
you can use this FM to delete the fixed asset.
ASSET_MASTERRECORD_MAINTENANCE
while calling the FM you need to send the parameter
i_trtyp = 'L'. "deletion flag 
along with other parameters.
check that..
vijay
Message was edited by: Vijay Babu Dudla

Creating a transfer in Fixed Assets addon

My fiscal year is 01-Nov-2009 to 31-Oct-2010. My asset has acquisition date 01-Nov-2009.
According to SAP help, you cannot book a transfer for an asset that was acquired in the current year. "If you want to book a transfer for an asset that was acquired in the current year, you have to create a new asset and change the acquisition date of this asset to last year".
Therefore, I created a new asset by duplicating an old one which had acquisition date 01-Nov-2009. I now want to change the acquisition date to 31-Oct-2009 for my new asset. How do I do this?

Created a new one since nobody was able to answer this.

Delete fixed assets

Hi,
I have a Fixed assets posted back on April, It was 70% deposit payment
before we get capex started Company went bankrupt,
Now I would like to cancel fixed assets but It is already depreciation
since April-10,
What is the steps the cancel fixed assets,
Please let me know,
Kind regards,,,

Hi,
I have a Fixed assets posted back on April, It was 70% deposit payment
before we get capex started Company went bankrupt,
Now I would like to cancel fixed assets but It is already depreciation
since April-10,
What is the steps the cancel fixed assets,
Please let me know,
Kind regards,,,
Sanju

Delete Worklist created in Fixed Assets thru AR31

Similar Messages

Maybe you are looking for