Deleting existing maintenance items in maintenance optimizer

Hi all,
is it possible, to delete existing maintenance items in maintenance optimizer?
Kind regards
Andreas

It is possible to delete the maintenance optimizer transaction using the steps below:
SE38
-> Run report "CRM_ORDER_DELETE"
-> Enter the maintenance transaction number(ID) of the transaction in "Business Transaction Number" and "SLMO" for "Business Transaction Type"
-> Execute
If the client role is set to 'Production', you would need to temporarily set it to 'Customizing' in order to delete the MOPZ transaction via the report above.
In general, it is possible to follow the note 1329247 and use the archiving object CRM_SERORD with transaction type SLMO to
archive maintenance optimizer transactions. Please note that only maintenance optimizer transactions with status "Completed" or "Withdrawn" can be archived. The transactions can be displayed using transaction code "/tmwflow/maintenance".
It is possible to archive EWA services via the report RDARCH_ARCHIVE_DATA_SOLMAN as described in note 546685.

Similar Messages

How to delete the redundant sessions in Maintenance Optimizer?

Hi experts,
As it said in title, how to delete the expired sessions as the screenshot below in Maintenance Optimizer and keep SAP Solution Manager clean?
Thank you in advance.
Best Regards,
Pany

Hello,
Check here Deleting existing maintenance optimizer transactions
Please refer to the note 845433 , with the report CRM_ORDER_DELETE and transaction type SLMO,you can delete those maintenance optimizer, hope this help to you
BR,
K.

Maintenance Optimizer says "Status profile doesn't exist"

Hi all,
I'd like to use the Maintenance Optimizer to install some support packages.
When I start it, I get the error message "Status profile SLMO0001 does not exist. Please check. Create the status profile or use a valid status profile."
How exactly do I create this profile? Or what profile am I supposed to use and how do I make the MO use that one?
I tried running the transaction SM_PREP_MAINTENANCE_OPTIMIZER, which did not help.
Thanks for your help.
Paul
PS: I also get the warning "Customization not available in logon language EN, use language EN.

Hi,
I just got an error, I think you might have the same.
This SAP note will help on the problems.
Note 1030498 - Maintenance Optimizer - IBase is not active
Actually, 1030498 solved everything. It is in this note 1024932 - Maintenance Optimizer: Collective Note.
Thanks.

Line item deletion in Maintenance order

Hi Guru's
Please let me know how to find the deleted line item in the component tab of maintenance order before saving.
for eg. The user creates the following line item in the component tab of the maintenance order.
Before saving he deletes the line item 20.
Item   component   qty
10       100001        10
20       100003        20
Please let me know where exactly the deleted status is stored, before saving for the line item
Regards
Vidhyadharan

Hi Pete
We are trying to prevent the user from creating product line items in Maintenance order with respect to equipment BOM. Let me explain you the scenario
Equipment 1000201 - contains the following components as BOM
1002775 - qty 2
1003326 - qty 1
When the user creates the order , he tries to withdraw more qty than the qty specified iin BOM. We have controlled it using enhancement IWO10009. Initially we didn't anticipate that the control can be skipped by duplicating the material (i.e material line) eg line no 10 :1002775 - qty 2 and line no 20: 1002775 - qty 2 and the transaction is saved. In order to control, we have modified the program accordingly and never allow the user to save, if there is a duplication of material.
The problem started when the user tries to save the line item after deleting the duplicate material
The check we used doesn't not allow the user to save inspite of the line item been deleted. The msg introduced keep repeating .
We tried debugging the program, we wouldn't find any deletion indicator in the structure   CAUFVD_IMP or resb to overcome this bug.
Can you pls let us know where exactly the deletion indicator or status is stored for the line item in the component tab before saving
Regards
Vidhyadharan

No System Found in Maintenance Optimizer

Hi,
I have installed solution manager (ST 400 SP09) and did apply the relevant notes to setup the Maintenance Optimizer.
I could able to see the Maintenance Optimizer button in Support Package and Stack Inbox.
(Transaction SOLUTION_MANAGER> select the Solution->operation ->Change Management ->Support package Stack)
But I found following message No Systems Found along with the following message
Change requests cannot be displayed or created, because the RFC connection has errors, or is not maintained.
Check whether the RFC connection to the Change Man agement system is under the key CHARM_DEST (APPLI field in the DESTINAT field), in the view BCOS_CUST. You need authorization for the cross-client view/table maintenance (S_TABU_DIS and S_TABU_CLI).
Check the RFC connection in the transaction SM59. If your SAP Solution Manager system is also your Change Manager system, the internal connection must be 'NONE'. You need authorization for the administration of RFC connections (S_RFC_ADM).
How do I proceed further? I wanted to see the Systems defined under SMSY transaction to be displayed here.
Can any body help me by providing the exact steps define the systems in Maintenance Optimizer and how to sync the components defined under SMSY with MOZ?
Regards
Arati

Hi Amit
This doesn't resolved my issue.I am getting following message
No entries exist, double-click for long text
Message no. SV065
Diagnosis
No entries were found when importing data from the database.
Procedure
To create new entries, choose the function Edit -> New Entries.
To recover deleted data, you must first display it with the function
Select -> Display Deleted, and then discard changes with Ctrl. + F2 or
the "Discard Change" button.
Thanks
Arati

Solman setup maintenance optimizer

Hi all,
I'm trying to setup my Solman Maintenance Optimizer to download SP.
When I read the configuration guide. It says the prerequisite is as below :-
The Maintenance Optimizer contains a lot of scenarios for maintenence procedures. The scenarios have different prerequisites.
Basic Prerequisites
   1.
      You have configured the Maintenance Optimizer in the SAP Solution Manager customizing.
      You must perform the following customizing activities for the Maintenance Optimizer:
            Assign S users for the SAP Support Portal.
            This activity specifies the S users (user ID for the SAP Service Marketplace) assigned to user IDs for the SAP Solution Manager.
            For more information see S Users in the Maintenance Optimizer.
            Enter user for communication with SAP Service and Support systems
2. This activity specifies the RFC connection SAP-OSS and the corresponding RFC user.
3.     You have assigned product versions to the system to be maintained, in the system landscape.
      You have assigned the systems to be maintained to a logical component.
      Note Note
      If you want to use a solution, you must assign the systems to be maintained, to the solution landscape. For more information, see Solution Manager System Landscape.
      End of the note.
   4.
      You have installed the Download Manager locally in your workplace. The Download Manager is in the SAP Software Distribution Center in the SAP Support Portal.
      Note Note
The item no2.
    This activity specifies the RFC connection SAP-OSS and the corresponding RFC user. <---- Is this mean I must have install and setup my Saprouter so that the SAP OSS connection is working before I can completed the SAP Solman Maintenance Optimizer setup?
Thanks.
Ck chai

Hi,
Just clarify my question.
I would like to run tcode "Solman_setup" to activate my Maintenance Optimizer for my new install SOLMAN & ECC6 System.
The reason is I need to download service pack for my ECC6 system.
Now I have some confusion on the "Solman_Setup" prerequisites
Prerequisites
You have installed the SAP Solution Manager and satisfied the following configuration prerequisites:
1)   The license key is installed. -
>OK
2)   The profile parameter /ICM_HOST_NAME_FULL or SAPLOCALHOSTFULL is set----
>OK
3)   The Transport Management System (TMS) is configured. -
> Not sure, Is this mean I have to setup my TMS in all the ECC6 system? Example --> DEV, QAS and PROD.
4)   The connection to the SAP backend system exists and works. -
> What is this mean? I need to Setup RFC connection manually using SM59? RFC connection from Solman to my ECC6-DEV,QAS, PRD?
5)   The SAP Solution Manager Java instance is up-to-date. --> not too sure. Can someone explain how this can be checked?
Thank you very much.
Ck chai

Local logical system is not defined-Maintenance Optimizer Config

Hi,
When I try to configure Maintenance Optimizer in SAP Solution Manager 7, it gives me an error saying "Local logical system is not defined"
But I have created a Logical client using SCC4.
And the other thing is for this created client, does not have any users on this client, If I run,
SQL> select bname, UFKLAG from sapsr3.usr02 where mandt='400';
Answer is "no rows selected"
So I cannot even login in to my new client as well. I tried with SAP/PASS no use. I tried to re-set sap by deleteing it nothing helped.
my login/no_automatic_user_sapstar parameter also have 0 (But this is in Red, I dont know why its like that)
Please help me to rectify both these issues. Issue with Maintenance Optimizer and loggin in to the new client.
Thank you!

First of all, 'Logical System' and 'Logical Client' are two different things.
For Client Problem:
You did create a client in SCC4.
1. did you create a logical system via BD54 and then did you assign that logical system to this newly created client ?
2. did you perform a local client copy to put data into this new client from an old or from a standard client like 000 ?
If you didn't perform above two things, then please do. Only then, you will be able to see some data in this client and will be able to to select statements, And, obviously the SAP*/PASS login (login/no_automatic_user_sapstar should be 0 after reactivation of profile and restart of the instance)
For MOpz issue:
Could you please search in sap marketplace for any particular note specific to MOpz ?

Maintenance Optimizer

Dear all,
When starting "Create New Maintenance Transaction" in Maintenance Optimizer, an information message prompted:"Status profile SLMO0001 does not exist. Please checl." and the following messages are shown after:
Warning Customizing not available in logon language EN, use language EN
Error Status profile SLMO0001 does not exist. Please check
Error Status profile SLMO0001 does not exist. Please check
Warning Status values of procedure type SLMO not read
I tried to implement note#1090202, all succeeded except step 2(a). When adding in SOCM_ACTION_003 I have an error message:
Entry SLMO0001 does not exist in TJ20 (check entry)
Solution Manager Package Level:
ST 400 0013 SAPKITL423 SAP Solution Manager Tool Component Supp. Pkg.
Would anyone can help?
Many thanks!
Daniel

Hi,
i had the same problem and i solved it with note 1090202 this problem is caused because of a missing customizing setting.
I dont know how the creater of this thread could be so egoistically and mark this thread as answerded without posting the solution. I think this is a insolence.
( He mentioned the same not as i do, but he didn´t wrote that this was the final solution)
I hope i can help somebody with posting my solution!
BR
Stefan

Problem with activating Maintenance Optimizer

I have reached the final stage of the configuration of the maintenance
optimizer. I have implemented all of the required notes in the MOPZ
collective note 1024932 (Notes 1008717 - HMTLViewer: Postdata of
length more than 255 gets truncated, (note 950975 is n/a for my system
we have SAPGUI 7.1), Note 975510 - Corrections for calls/interfaces
implmented incorrectly, and 1004691 - SNOTE:
OBJECTS_OBJREF_NOT_ASSIGNED when you implement a note, and the strongly
recommended note 997780 - Maintenance Optimizer: Checks that should
not be executed.
When I try to run the report SM_PREP_MAINTENANCE_OPTIMIZER after
implementing note 990534, I get the following error:
For object SOLAR, no sub-object SOLMAN_CONFIG is maintained
Message no. BL011
Diagnosis
An application log entry is to be made for sub-object SOLMAN_CONFIG of
the object SOLAR. This sub-object is, however, not maintained for
object SOLAR.
Objects and subobjects of the application log are created using
transaction SLG0.
System Response
The program had to be cancelled.
Procedure
Inform the system administrator
I have verified all of the steps in the document "Step by Step
Configuration of the Maintenance Optimizer". I have also done the
basic IMG settings under Solution Manager in the IMG. I did not
do "Activate integration with the Change Request Management". We are
not using Change Request Management.
Has anyone seen this type of message before? I could do the BC Sets manually but I want to use the report.

Thanks Lars. I opened a ticket with SAP and it looks like you can ignore this:
Hello,
You can ignore the message. It is displayed because when the report
runs we try to write the log to the sub-object SOLMAN_CONFIG, which does not exists with Support Package 9, due to it you get the message.
Regarding the 02 options to configure the Maintenance Optimizer it
just occurs becasue the report was not available with Support Package
9 of SAP Solution Manager, however due to the increasing number of
customers that required an easier configuration for the Maintenance
Optimizer we decided to make the report available through the note.
So there is not difference between the 02 configuration options.
The report does exactly the steps described in the alternative
configuration.
I'll give you full points!!

Maintenance Optimizer - ConfigTool.sh - SAP NetWeaver 7.0

Hi Everybody,
First I wanted to set up my MOPZ to do this I have to create a RFC "SAPSLDAPI"
Until there no problem but the next step become a little more problematic.
I have to run the admin tool /usr/sap/SOL/..../j2ee/admin/go.
Unfortunatly I lost the password's J2EE_ADMIN, no problem google is your best friend and then I tried to run the config tool. Oh big surprise
The java class not found: com.sap.offline.OfflineToolStart
What can i do to fix this problem?
Note 1024932 - Maintenance Optimizer: Collective Note
http://help.sap.com/saphelp_nw70/helpdata/en/b7/341241d71cd349e10000000a1550b0/content.htm
Edited by: Hafid CHEBRAOUI on Jan 14, 2009 4:22 PM

It sounds like you have two different issues here.
MOPZ
And Java Stack not starting.
Maintenance optimizer requires that your connection to SAP is in tact first through the saprouter. Do you have all of that in place and is your rfc connections for SAP_OSS and SAPNET_RFC working.
SAPSLDAPI is a connection for the SLD not for the maintenance optimizer.
The link you put below doesn't have anything to do with configuring maintenance optimizer. The ossnote you posted is a collective note for maintenance optimizer and points you to spro to follow the instructions.
Review https://websmp108.sap-ag.de/solman-mopz
Review ossnotes 990534 and 1024932
try running SE38 SM_PREP_MAINTENANCE_OPTIMIZER That may give you some assistance.
Anyone that is going to download using the maintenance optimizer needs to exist in transaction AISUSER
As for the Java stack.
It sounds like your path is not right. Did you update your path environment variables with the installation directory of java? Check that java -version is working from the <sid>adm login.
Lee

Maintenance optimizer transaction dont see product version for a solution

Hi,
I am having a very difficult time in understanding the concept of solution manager product system,instance,solution. Now, in Technical Administration >> Solutions >> I click on a solution, in the solution the product column is missing. Then it appears after some configuration.
Now, when I create a maintenance optimizer transaction, I select the solution but I don't see the see product version, nothing appears.
Please guide

Hi Shashank,
If I am getting you correctly then you are not getting product version in drop down in a new MOPZ transaction ?
Use below steps:
Run Transaction Solman_Workcenter.
Select the Solution Manager Administration tab.
Click Solutions.
Either.
Create a new Solution to add the logical component, or add it to an existing solution.
If a new solution...
Click on New.
Give the solution a name.
Set the Solution Data settings.
Now the Solution exists.
Select an existing solution that you want the System to be placed (can be the new one).
Add the Logical Component to the Solution.
If the system is other than Type Production then...
Go to change edit mode.
Right click on the SID, and select “Put in Solution” the cell the SID is in will turn green.
Save.
Regards,
Divyanshu

Configuration of Maintenance Optimizer and IMG-configuration

Hi!
I am installing SAP Solution Manager 4.0 and two ERP-systems and would like to ask, whether a suitable detailed documentation about
Configuring Maintenance optimizer
IMG-Configuration
does exist?
P.S. Besides the document "Step by step Confugaration of Maintenance Optimizer" or .sim-File.
Thank you very much indead!
regards

Dear Axel,
Kindly review the URL :
http://service.sap.com/solman-mopz
On the first page at the bottom end you would find an PDF for configuration of Maintenance Optimizer and also an SAP Tutor file for the same.
Follow the steps and you are ready with the optimizer for downloading packages.
Hope the above information helps.
Regards
Amit Devale

Maintenance Optimizer in SAP Solution Manager

what is Maintenance Optimizer in SAP Solution Manager and what are its benefits

Hi
even this may be useful
Ensure your Solution manager system is at the most recent Support Package Level, specifically ST 400 Patch 11, to reduce note application time
Download from oss most recent step-by-step setup guide
Oss note 1024932
Oss Note 1008717 ( N/A )
Relevant up to SP11 for Basis 700
OSS Note 950975 support for IE7 ( N/A we are using GUI)
Oss note 975510 corrections for snote ( Via OSS not snote )
Oss note 1004691 corrections for snote *** Corrections for 975510 ( UP TO SAP_BASIS 11 ) N/A
Common problem notes, but not critical for Maint Opt
0998987: Maintenance Optimizer: Empty error messages
1022072: Maintenance Optimizer: "No Data Available" message o See note 1025381 before applying 1022072.
1020789: Maintenance Optimizer: Allow all systems to be selected
1020802: Maintenance Optimizer List displays incomplete data
1024105: Maintenance Optimizer: two "Cancel" buttons
1025381: Maintenance Optimizer: Link to additional download files
1029453: Maintenance Optimizer - Wrong status displayed
1030405: Maintenance Optimizer: Browser opens in background
1030498: Maintenance Optimizer - IBase is not active
1032463: Maintenance Optimizer: Internet Explorer Script Error
1042704: Maintenance Optimizer: Display only employee partners
Partner Scenario SOLMAN4.0 Only
Os note 1021275 ( RFC Destinations ) N/A ST 400 11
Oss Note: 997780 ( N/A we are at 11 use note 939897 for ST400 SP11 Application )
Relevant for ST400 SP09 ( N/A ST 400 11 )
User:
To setup you must have SAP_ALL
General Users: ( Oss note 1032322 )
Must be assigned to role SAP_MAINT_OPT_ADMIN
Auth Object: D_SOL_VSBL ( visibility of solutions)
Auth Object: CRM_ORD_PR ( for CRM stuff )
/spro
As of Support Package level ST 400 SP10:
Call Transaction SPRO -> SAP Reference IMG ->SAP Solution Manager -> Advanced Configuration -> Basic Settings -> SAP Solution Manager System -> Change Management -> Set Up Maintenance Optimizer
This IMG activity refers to the SAP Note 990534: Solution Manager Maintenance Optimizer: BC Set. Follow the instructions in this SAP Note
N/A as of ST400 SP11
Define a Solution:
Solution_Manager Select Solution Overview New.
Enter Descriptive Name ( Ex. GTS Landscape )
Hit Continue
Select Solution Landscape Maintenance
Select System Groups & Logical Components on the Left hand Side
Select Solution Landscapes and pick the one you created
Define the solutions for that landscape
Highlight each item and click Logical Component (You must have a valid license to set this up)
Assign S-User
Transaction: AISUSER
Enter you user id and your SUSER ID for downloading
Create another SAPOSS Connection called SAP-OSS with S-User assigned
Call SOLUTION_MANAGER
Select Solution Overview
Select the solution you want to work with
Select Change Management Support Package Stacks
Click Maintenance Optimizer around middle of screen
Select the solution you want to get Sps for
Go to OSS and add the files to download basket
When done return to screen and hit continue
Select - Confirm files in Download Basket
Error message comes if your sap user and your oss user are not setup in AISUSER screen
Now go to SAP Download Manager ( On your local pc ) and download the files you just confirmed of course using the same S-User id you just added them to the basket with
Apply support packages via spam per normal process
Return to the SOLUTION_MANAGER window select the landscape you are working on
Hit Maintenance Optimizer List
Choose the maintenance transaction you are working on
You will see a list of the confirmed and downloaded sps you selected
Once you apply these to the system using SPAM you will change the status of implementation to Completed and Hit Save
This completes this activity
If you wish to do more work you will have to create a new transaction.
[Edit section] Add A New Instance to Maintenance Optimizer
Sign into Solution Manager
Ensure new instance has valid license installed and logical clients assigned
Select Landscape Components
Right Click Systems
     Select Create new system with assistant
Enter
SID / Description / Product Type / Installation Number ( Get this from SLICENSE in system you are setting up )
Next enter Sys # & MEssgae Server and hit continue
Next select Generate RFC Destinations & Assign Logical Components & Enter Client #
I always get a problem saving since SLD is not setup ignore and continue
Highlight the system you just added under Systems SAP Global Trade Services
Select Assignment to Logical Components
Now add additional software such as Net weaver ABAP & JAVA if your primary setup was of another type ( ex. GTS )
Highlight the system you wish to update under Systems and hit change
     Select Header Data
     Click Installed Product Versions
     In the product box add whatever you require for this system
     Select the version from the 2nd box and hit copy
Ex.
If you cannot setup the trusted system here is a workaround:
Create User in Target for Trusted System RFC from SM1
     User:      <Username>
     Pass:   <Pass>
     Type: Communication
Use this when setting up the trusted connection, remove the trust and use this CPIC user info for the RFC.
Generate RFCs and ensure SMSY setup is done for SID in Solution manager
Now Create a New Solution For your instance:
Go to SOLUTION_MANAGER transaction
     Select NEW
     Give Descriptive name: ex. GTS Landscape
Under Solution Landscape
     Select Solution Landscape Maintenance
     Select System Groups and Logical Components Tab
          Open Solution Landscapes
               Select the one you just defined (GTS Landscape)
SOLTION_MANAGER
Select Change Management Support Package Stacks
Select Maintenance Optimizer
Select the Product Version
     GTS 7.1
Select the System Type SID
From here you will be prompted to go to service marketplace and add the items you wish to install. You can do this beforehand as well, be sure to use the same Suser you setup in AISUSER with your sap login
It will ask you to confirm the basket, once you do that you install them normally.
Download with sap download manager, ftp and apply

After EHP1 upgarde Maintenance Optimizer not work

Dear ,
In our solution Manger Maintenance Optimizer was proper configure and working . But After Implement or Upgrade EHP1 ,When I run tcode solution_manager for downloading some SP.Then click on Maintenance Optimizer its direct goes to http://hostname/client001......etc
After Implemention EHP1 on Solution manager 7.0 ,Should we configuer Maintenance Optimizer again. OR any post implementation step after EHP1 upgrade.
why it going to http://hostname/client001......
Now how I can download SP or Note from my solution manager in that EHP1 has been upgraded.
regards

I have upgrade solman 7.0 to EHP1 solman 7.01 SP26.
in etc/hosts IP address and Host name allready exist.
when Click on Maintenance Optimizer it goes on beow site
http://saprouter.domain.ext:8000/sap/public/myssocntl?sap-client=100
Where saprouter is my solman Host Name and Client 100 is where I am logging.
is any parameter changes required for resolve this problem
regards

How to delete URL Maintenance in peoplesoft

how to delete URL Maintenance in peoplesoft , Please any one suggest to me how to delete identifier.
Navigation : Main menu -->Peopletools --> Utilities --> Administration --> URL
in this url page have URL maintenance.I added one identifier .
URL Identifier:
*Description:
*URL:
Comments:
Regards,
lokeswar

Main Menu>PeopleTools>Portal>Structure and Content>Traverse to the URL by clicking on the links(Peopletools --> Utilities --> Administration --> URL)>Click on Edit Link
Check the box for "Hide...."

Deleting existing maintenance items in maintenance optimizer

Similar Messages

Maybe you are looking for