Deletion KP26 planned values.

Hi Gurus,
When at the time of uploading planned activity prices in KP26, we entered wrongly cost centre and activity type.
Now we dont want that combination, we try to delete that but still it is coming again.
It is happening in Production, stilll we are not gone live, when we run CK40N this problem it showing.
we are not able to delete at all.
What would be solution.
Regards
Sreenivas.P

Dear Sreenivas,
Now the problem is occuring because of the wrong assignment or combination of Cost center/Activity Type.
Better create a new cost center, activity type and then fix the rates in KP26.
Now you can sssign this cost center in the costing tab key in the work center either in CR01/CR02 and
also the activity type.So if this work center is assigned to perform some operation either in routing/Rate
routing,while doing the cost rollup using CK11N or CK40N,the new cost for peforming the operations get's
picked up as per the new rates.Follow these steps.
1.Create a Cost center using T code - KS01.
2.Create an activity type using T code - KL01.
3.Assign the Rates for an activity type & cost center combination using T code KP26.
4.In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
Year as 2008,enter the cost center, activity type click on overview screen (F5)---> enter the per hour Rate
under Fixed price and set value as 2 for distribution key and plan price indicator as 3.
5.After performing this ,while creating the work center ,this combination of activity type & cost center
should be assigned.Then while creating routing/task list this work center can assigned for performing
operations.
Check with this & revert back if you need any further help.
Regards
Mangalraj.S

Similar Messages

Planned Values Missing from report S_PL0_86000029

Planned Values Missing from report S_PL0_86000029, how to rectify this?
Where to plug in the values?

it's Plan actual comparison in the Profit and Loss Financial Statement.
This Transaction Code is for Profit Loss Statement whereby the Planned values have to be seen.
But one thing, I have also deleted the planned values from the General Ledger and Profitability Analysis.
Need to get these Planned values. But from Where?
Deleting GL Planned values - GLDE
Deleting COPA values - KEDB
This is what I have used.
Edited by: Bhatia on Oct 9, 2008 8:16 PM

KEPM....Delete plan values..

Hi Experts-
Here i am facing on eissue pls suggest....
In KEPM i did planning for 2011, that is updated with wrong values and with wrong combination......
I have deleted all steps in KEPM, but still i am getting those values in KE30 report....pls guide me how to delete plan values...
Pls suggest how to delete those values and what steps need to take in planning?
Thanks
Chandu

Hi Reddy Anna
You can use transaction KE1C in order to delete planning data.
But transaction KE1C does not phyically delete entries made in table CE2xxxx. The method used in this situation is the reversal method (the line item is reversed out of the table by posting a negative line item).
If you want to delete these line items totally then I would suggest that you use the archiving transaction SARA. This will reduce the table size.
You also have a delete option in KEPM but this is normally for large volume of data and you can check if it is useful in your case.
You could also use KE13N to post the delta to edit/correct the entries. For example for customer A and product B you have revenue of 1000 (but it should be 900). In that case you can post a line item of -100 so that the result is 900.
You can see which option is most suitable for you
br, Ajay M

How to delete Hyperion Planning member using ODI

Hi All,
Anyone know how to delete Hyperion Planning member using ODI? And how to update account type on Hyperion Planning Using ODI?
e.g.:
I have a member with account type Saved Assumption, and I need to change to Revenue, but it cannot change. But if I change to Expense, it can. So what's wrong with the mapping?
This is my csv file for update a member on Hyperion Planning.
Parent,Account,Default Alias,Operation,Data Storage,Two Pass Calculation,Account Type,Time Balance,Skip Value,Data Type,Exchange Rate Type,Use 445,Variance Reporting,Source Plan Type,Aggregation,Member Formula
Account,Statistics,,Update,,,,,,,,,,,,
Account,Meal,,Update,Store,,Expense,,,,,,,,,
Account,Test1,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
Account,Test2,,Update,Never Share,,Revenue,Average,None,Non-currency,none,,,Consol,~,
Account,Test3,,Update,Never Share,,Saved Assumption,Average,None,Non-currency,none,,,Consol,~,
Thanks in advance.
Regards,
Sumardi
Edited by: Sumardi Wijaya on Mar 31, 2009 10:57 PM

Hi,
To delete a member you use the Operation column, the following values can be used.
Update – This is the default and is used if not populated, it Add, updates, moves the member being loaded.
Delete Level 0 - Deletes the member being loaded if it has no children
Delete Idescendants –Deletes the member being loaded and all of its descendants.
Delete Descendants –Deletes the descendants of the member being loaded, but does not delete the member itself.
Does the member you trying to change to Revenue have a variance reporting set to "Expense" as it will need to be set to "Non Expense"
Also in your interface you can add logging options in the IKM, this maybe will give a clearer indication where your problem lies.
Cheers
John
http://john-goodwin.blogspot.com/

Planned values in report painter

Hello,
Does anybody knows if it is possible to extract planned values (planned through transaction code FSE5N) into a report built through report painter tool?
My report is comming out with "0" values even though I have selected plan version and Plan/Act. indicator.
Appreciate any help!
Paula Rocha

Hi Stacey.
I have just tried, and no changes... Still have "0" values...

Plan values not being displayed in the report ..

Hi All,
I have a query on query.. .
which displays actual and plan values , but the report is not showing the plan values
tell me how to do this
Sruthi

Sruthi,
Basically how do you store the data in the transaction cube's ?
How does the data differs b/w Plan and actual for the same KF ?
It stores depending on the Version...
Restrict the KF to a perticular version ...
Then you can get the desired...
Check the LISTCUBE with different versions..
Cheer's
HVR.

PS : Plan value query in Plan report S_ALR_87013533.

Dear PS Experts,
We are refering to a report T-Code : S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned. For one of the WBS, we find some planned values.
We checked the following for Plan value research :
1. In CJ40/CJ41 : We find Plan values in the fields "Planned Total" against that WBS Element.
2. In CJR3 : No plan values inserted / uploaded. Meaning its all blank and there's no WBS having any Plan Values against any Cost Elements.
With the help of F1, on the field of "Planned Total" of CJ40/CJ41, I could find explanation & understand "Plan total is the annual or overall plan value including existing values from unit costing and cost element planning. In the cost planning of projects, the plan total also includes the plan total for all orders and networks assigned to the chosen WBS element and those subordinate to it."
Please help me to know :
1. If not CJ40 or CJR3, then from where do I am getting Plan values.
2. From where would I be able to find those line items (planned or actuals) reflecting in the

Hi,
I m just refering to report T-Code : S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned. In that, for one of the WBS, we find some planned values.
Refering to CJ33, we observe that the :
1. Overall Budget is 985,000.00
2. Planned Total is 1,321,986.41
We checked CJ40 & CJR3 and have found that we havent uploaded any plan values (thru both the T-Codes), but still Plan Values Total shows as 1,321,986.41
Please help me to know : If not CJ40 or CJR3, then from where do I am getting Plan values.

How to find out manual deletion of planned orders in APO.

Planned orders are created on multiple bom levels when we call CTP from GATP for sales orders. For particular sales order there is no planned ordere at lower level. Dependent requirement is there which is uncovered.
I want to find somebody has deleted this planned order manually in apo. How to find out the same?
Regards,
Santosh

Hi Santosh,
If you suspect that the planned order was created but later on deleted manually, there is a cross check you can do to determine that.
In case of MATP, System uses the higher level Planned Order number to create the Dependent Demand at the lower level and only when this dependent demand is covered by a planned order it assigns the corresponding planned order number to it. So if you see the dependent demand number with same number as the higher level planned order for which it was created, you can be sure that a planned order was not created to cover the dependent demand that you see uncovered.
If the dependant demand number is not same as the planned order at higher level, then the planned order to cover the dependent demand was deleted.
I guess CTP also works the same way. If you're unsure about this, test it out.
Hope it helps.
Regards,
Mohan

Asset still showing planned value for closed fiscal year.

*We have a situation:- After we ran depreciation for Dec 2009, there was a credit memo posting done in the system for a particular asset. Now, the fiscal year has been closed for 2009 and 2010 is opened. Jan and Feb depreciation posting has been done for the asset for year 2010, but the credit memo posting is still stuck as planned value in the 12th period of 2009. How can we take care of that? I canu2019t run unplanned depreciation for 2009. Is there a better way to take care of this? I thought about opening year 2009 for the asset (ccode) and then running unplanned depreciation. Will that be a problem? If yes, what other solution can be proposed.*
*Appreciate the response.*

Hi,
If it is not possible to open the fiscal year because audit
has already been completed we have a workaround which is not quite
correct from the legal side ist thereport RACORR20_A from note 29694.
If in table ANLC there are differences between posted and planed
depr. the report simply makes: planed = posted.
The correct way would be:
-> Reopen your GL for FY 2008 via OB52.
-> Recalculate values (RAAFAR00)
-> RAPOST2000
-> RAPERB2000
-> RAJABS00
Regards Bernhard

Billing Plan values in the sales order

Hi,
After configuring the billing plan for processing in the order i am able to see the billing vlaues as per the values given in the billing plan type when I run the billing due list. Where as when I tried to create the billing document from the due list it is selecting the total value of the item. It is not copying the Billing plan value instead copying the total value of the item.
can any one help me
regards
AVS

Hi, Rajesh,
My issue is with the billing plan values are not getting copied into the F1 invoice. But when I run the order related billing due list I am able to see all the billing line items with values mentioned in the billing plan.
regards
AVS

Planned Values in SAP R/3 ECC6.0

Hi
There are many Trial Balance report, which tells, run trial balance plan v/s actual (Tcode: S_PL0_86000029).
I want to know where i can enter planned values in SAP R/3 and what all activities i need to do to maintain planned values.
I am in SAP EHP5.
Please help
Edited by: Deepak Agrawal on Feb 4, 2012 11:07 AM

Hi Deepak,
As suggested by Mr.Srinivas ,you have to upload planned values through FSE5N and also mentioned customization also required to do in SAP to achieve the same
V_T001B_PL
Rgds
SumaMani

Planned values in RA

Hi all,
We have a problem with result analysis - planned values on secondary CEs (planned overheads) are not included in the total planned costs although the respective CEs are correctly assigned row IDs and relevant for RA. This appeared after upgrade. No ZXKG* enhancement in place. Any clue?
thanks to all

Hello Christian,
It is the user outcome from post-upgrade testing. Found in KKA2 (single RA for WBS) - the cummulative planned costs in Plan data of valuation section ( C(p) ) is less than the total planned values displayed in project infosystem and the difference is equal to the value on the secondary CE (type 43). This CE is assigned to ID row and have category K (costs relevant for wip) in OKG4. Verified for several WBS in 2 independent client so that it looks like userexit problem but there is no ZXKG* include.

Planned values of profit centers not showing up in customised report painte

Hi,
I made a customised profit center report via report painter. I have already uploaded planned values in KP06. In the customised report painter, the record type is "1" (plan) and version is "0" for actual/plan. The columns for the planned values do not show any figures. But when I generate std SAP report S_ALR_87013340 - Profit Center Group: Plan/Actual/Variance, it shows the plan values. In that way, I know that the cost center upload is correct.
Please advise on how to show the plan values on the report painter.
Thanks and best regards,
Thess

Hi,
ahhh...the fact that you can see the actual values has made me realize what the problem might be. GLPCP and GLPCA (actual line items) use different fields in regard to the period. I assume that you are utilizing the POPER characteristic to select the periods....correct?
In that case please try the following: copy library 8A3 into the customer name space (I would always base customized reports on your own library). In your copy activate the RPMAX characteristic. The re-create your report based on the new library and make the following changes: use RPMAX in the general selection and only use POPER in the column definition for the actual values. That should work.
Regards
Karl
P.S....hope you bear in mind that such a report is a potential performance nightmare.

APC Value and Plan Value for an Asset.

HI Gurus,
I am developing a report where I have to display the APC value and Plan value of an Asset.Can anyone pls give an insight how to find this for the Asset.

Hi,
why don´t you use the logical database ADA which most of the FI-AA standard reports do? The logical database is a service to get this information without developing all the READ information and translation by yourself, especially when talking about mid-year-reporting, consistence checks, etc..
If you decide to use ADA, then the events GET ANLA0, GET ANLAV and GET ANLCV are from interest for you for information about APC and planned/posted depreciation value.
Regards,
Markus

Asset planned values computed positive value Issue

HI experts,
I have an existing asset problem where the planned depreciation values becomes positive. Why does it becomes positive? How does system calculates this planned values? We just did some adjustment to the Asset by Credit Memo and another Mark-up transaction. Sample:
Asset 1610600065
Planned Values - Transactions:
26.02.2011     160,000.00-     160     Credit memo in following year     64,000.00     0.00     0.00     SGD
26.12.2010     98,666.66     700     Write-up ordinary and spec     43,851.85-     98,666.66     98,666.66     SGD
26.12.2010     98,666.66-     700     Write-up ordinary and spec     43,851.85     98,666.66-     98,666.66-     SGD
26.12.2010     93,333.33     700     Write-up ordinary and spec     41,481.48-     93,333.33     93,333.33     SGD
26.12.2010     93,333.33-     700     Write-up ordinary and spec     41,481.48     93,333.33-     93,333.33-     SGD
26.02.2011     160,000.00     160     Credit memo in following year     64,000.00-     0.00     0.00     SGD
23.06.2011     160,000.00-     160     Credit memo in following year     60,000.00     0.00     0.00     SGD
26.12.2010     101,333.33     700     Write-up ordinary and spec     33,925.92-     101,333.33     101,333.33     SGD
                                                               26,074.08     101,333.33     101,333.33     SGD
But the planned/posted value for this period is positive:
Status Status Period Amount
Green Posted     1     6,666.67-
Green Posted     2     6,666.66-
Green Posted     3     6,666.67-
Green Posted     4     6,666.67-
Green Posted     5     6,666.66-
Green Posted     6     6,370.37
YellowPlanned     7     4,493.83-
Posted Values - Depreciation Posted/Planned:
APC transactions     400,000.00     160,000.00-     240,000.00     SGD
Acquisition value     400,000.00     160,000.00-     240,000.00     SGD
Ordinary deprec.     220,000.00-     26,962.96-     246,962.96-     SGD
Unplanned dep.                    SGD
Write-ups          101,333.33     101,333.33     SGD
Value adjustment                    SGD
Revaluation ord.dep.                    SGD
Net book value     180,000.00     85,629.63-     94,370.37     SGD
Down payments                    SGD
Scrap value                    SGD

I believe in your case, the tremendous reduction in APC cost has caused a tremendous change in planned depreciation. System looks at the NBV and the remaining periods of useful life each time it calcs depreciation. Of course also looks at depreciation key, Period Control, and OAYR Smoothing button. Asset class can also be set for group depreciation.
If a credit memo reduced the APC value dramatically, then the amount of depreciation on the asset at that moment is more than enough so far. This means that the next running of the AFAB program will reduce its amount of depreciation from the amount it was planning to book since it already has an excess of accumulated depreciation.
Please check in OAYR to know if your Smoothing indicator has been checked for the Company Code. As I understand the system, if this indicator is checked - the system will not catch-up the whole difference in the next running of AFAB. Instead, it will smooth out the adjustments due to credit memos, unplanned depreciation, and changes in remaining useful life over the remaining life of the asset. When smoothing is set, one gets less drastic period to period change.
This setting should be in line with your accounting rules, such as in US GAAP changes in depreciable life are considered estimate changes requiring only prospective corrections, and so should smooth out impact over remaining periods of useful life versus immediate catch-up.
You may want to run a AFAR (check for recalc flags) and then a Repeat AFAB in the current period after making master data changes for depreciation. All open periods would be impacted by master data changes if you run AFAB.

Deletion KP26 planned values.

Similar Messages

Maybe you are looking for